Search NASA⌕ Search

SEARCH · Search NASA

Results for “subsurface data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Chlorite Dissolution Kinetics at Variable pH and Temperatures up to 275 °C

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for chlorite that would be applicable over a wide range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineering geothermal reservoirs. The resulting rate equation is dependent on both pH and temperature and utilizes two specific dissolution mechanisms (an “acid” and a “neutral” mechanism). Rate parameters were derived from data collected at LLNL and available published data from Lowson et al. (2007). The form of this rate equation (Equation 1) should be easy to incorporate into most existing reactive transport codes for use in prediction of rock-water interactions in EGS systems. Specifically, we find that the dissolution of chlorite, a sheet-silicate, is relatively slow at elevated temperatures (100-275 °C), compared to other framework silicate minerals for which higher temperature kinetic data are available (e.g., quartz and feldspars; see Palandri and Kharaka, 2004). This finding is in conflict with previously reported high activation energies for chlorite based on extrapolation of low-temperature experimental data to higher temperatures. Additionally, we note that the dissolution of chlorite does not increase under alkaline conditions, as has been noted for other minerals, but rather remains at the same level as that noted for neutral conditions, with only a weak dependence on temperature. Future work includes similar rate measurements and the derivation of useful rate equations for illite, smectite, and biotite from pH 3 to 10 and 100 to 275 °C. Geochemical alteration, changing stress fields, mass transport and heat transfer incorporated into computational models are needed to optimize geothermal energy production for EGS systems. The resulting mineral rate equations from this work can be directly incorporated in modeling efforts to fully assess the impacts of geochemical alteration on long-term fracture permeability for EGS systems across the Geothermal Program. Chlorite rate equations and data have been submitted to the Geothermal Data Repository.

15 GEOTHERMAL ENERGY↗

Strategic Qualitative Risk Assessment of Thousands of Legacy Wells within the Area of Review (AoR) of a Potential CO2 Storage Site

The subsurface confinement of anthropogenic carbon dioxide (CO2) demands robust risk assessment methodologies to identify potential leakage pathways. Legacy wells within the Area of Review (AoR) represent one potential leakage pathway. Robust methodologies require enormous amounts of data, which are not available for many old legacy wells. This study strategically categorizes 4386 legacy wells within the AoR of a potential CO2 storage site in the Illinois basin and identifies the high-risk wells by leveraging publicly available data—reports and well logs submitted to state regulatory agencies. Wells were categorized based on their proximity to the injection well location, depth, the mechanical integrity of well barriers, and the accessibility to these wells throughout the project lifecycle. Wells posing immediate risks were identified, guiding prioritized corrective actions and monitoring plans. Out of 4386 wells, 54 have high priority for corrective action, 10 have medium priority, and the remainder are of low priority. Case study results from the Illinois basin demonstrate the effectiveness and applicability of this approach, to assess the risk associated with legacy wells within the AoR of potential CO2 storage site, strategically categorizing over 4000 such wells despite data limitations.

Arbad, Nachiket (ORCID:0000000215353656)↗

NETL Well Integrity Workshop: Identifying Well Integrity Research Needs for Subsurface Energy Infrastructure

Wells are a critical component of subsurface energy infrastructure. Ensuring the integrity of wells as engineered pathways for the safe extraction, injection, and storage of fluids in the subsurface is key to maximizing the effectiveness and resilience of that infrastructure. Addressing well integrity issues in a technically robust manner that promotes environmental sustainability and social equity is also an important focus of the United States (U.S.) Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management. Industry best practices, regulatory standards, modern monitoring data acquisition and control systems, and decades of research and development have dramatically improved the performance and reliability of wells for hydrocarbon extraction and underground injection in the oil and gas industry. Yet, important innovation is required to improve and ensure well integrity performance in engineered geologic systems where operational environments (fluid composition, temperature, pressure, and/or stress conditions) and long functional life cycles of well systems present unique challenges. Additionally, work is needed to understand and manage the long-term integrity and risks associated with legacy wells—especially those located adjacent to and presenting hazards for new subsurface activity.

02 PETROLEUM↗

De-risking fault leakage risk and containment integrity for subsurface storage applications

The subsurface is pivotal in the energy transition, for the sequestration of CO 2 and energy storage. It is crucial to understand to what extent geological faults may form leakage pathways that threaten the containment integrity of these projects. Fault flow behavior has been studied in the context of hydrocarbon development, supported by observations from wells drilled through faults, but such observations are rare in geoenergy projects. Focusing on mechanical behavior as early indicator of potential leakage risks, a probabilistic Coulomb Failure Stress workflow is developed and demonstrated using data from the Decatur CO 2 sequestration project to rank faults based on their containment risk. The analysis emphasizes the importance of fault throw relative to reservoir thickness and pore pressure change in assessing reactivation risks. Integrating this mechanical assessment with geological and dynamic fault analyses contributes to derisking fault containment for geoenergy applications, providing valuable insights for the successful development of subsurface storage projects.

58 GEOSCIENCES↗

Rotation-Enabled 7-Degree of Freedom Seismometer for Geothermal Resource Development. Phase 1 Final Report

Under this Department of Energy (DOE) grant, A-Tech Corporation d.b.a. Applied Technology Associates (ATA), seeks to develop a seven-degree-of-freedom (7-DOF) seismic measurement tool for high-temperature geothermal applications. The Rotational-Enabled 7-DOF Seismometer includes a conventional tri-axial accelerometer, a conventional pressure sensor or hydrophone, and a tri-axial rotational sensor. The rotational sensing capability is novel, based upon ATA's innovative research in rotational sensing technologies. The geothermal industry requires tools for high-precision seismic monitoring of crack formation associated with Enhanced Geothermal System (EGS) stimulation activity. Currently, microseismic monitoring is conducted by deploying many seismic tools at different depth levels along a 'string' within drilled observation wells. Costs per string can be hundreds of thousands of dollars. Processing data from the spatial arrays of linear seismometers allows back-projection of seismic wave states. In contrast, a Rotational-Enabled 7-DOF Seismometer would simultaneously measure p-wave velocity, s-wave velocity, and incident seismic wave direction all from a single point measurement. In addition, the Rotational-Enabled 7-DOF Seismometer will, by its nature, separate p- and s-waves into different data streams, simplifying signal processing and facilitating analysis of seismic source signatures and geological characterization. By adding measurements of three additional degrees-of-freedom at each level and leveraging the information from this new seismic observable, it is likely that an equally accurate picture of subsurface seismic activity could be garnered with fewer levels per hole. The key cost savings would come from better siting of the well due to increased information content and a decrease in the number of confirmation wells drilled, also due to the increase in information per well. Improved seismic tools may also increase knowledge, understanding, and confidence, thus removing some current blocks to feasibility and significantly increasing access to potential geothermal sites. During the Phase 1 effort summarized in this final report, the ATA Team modeled and built two TRL 3 proof-of-concept test units for two competing rotational sensor technologies. The two competing technologies were based on ATA's angular rate and angular displacement measurement technologies; Angular rate: ATA's Magnetohydrodynamic Angular Rate Sensor (Seismic MHD); and Angular displacement: ATA's Low Frequency Improved Torsional Seismometer (LFITS). In order to down-select between these two technologies and formulate a go / no go decision, the ATA Team analyzed and traded scientific performance requirements and market constraints against sensor characteristics and components, acquiring field data where possible to validate the approach and publishing results from these studies of rotational technology capability. Based on the results of Phase 1, the ATA Team finds that the Seismic MHD (SMHD) technology is the best choice for enabling rotational seismometry and significant technical potential exists for micro-seismic monitoring using a downhole 7-DOF device based on the SMHD. Recent technical papers and field data confirm the potential of rotational sensing for seismic mapping, increasing confidence that cost-reduction benefits are achievable for EGS. However, the market for geothermal rotational sensing is small and undeveloped. As a result, this report recommends modifying the Phase 2 plan to focus on prototype development aimed at partnering with early adopters within the geothermal industry and the scientific research community. The highest public benefit will come from development and deployment of a science-grade SMHD rotational seismometer engineered for geothermal downhole conditions and an integrated test tool for downhole measurements at active geothermal test sites.

15 GEOTHERMAL ENERGY↗

dissimilatory iodate reduction by Hanford microbial isolates - 15226

Microbial radioactive iodine ({sup 129}I) redox cycling in saturated soils is not well understood and provides a novel avenue for bioremediation studies. {sup 129}I is a major by-product of nuclear fission, and is of environmental concern due to its long half-life (∼16 million years), toxicity, and mobility in the environment. The 200 West area of the Hanford Site contains two separate plumes covering 1,500 acres where {sup 129}I concentrations are ∼3.5 pCi/L in Hanford soils. Speciation analysis shows that iodate comprises 70.6% of the iodine present, and organo-iodide and iodide comprise 25.8% and 3.6% respectively. Microbial redox activity within these iodine plumes affects iodine speciation, consequently impacting iodine mobility within the subsurface and the potential options available for bioremediation. An iodate reducing organism, designated as Agrobacterium tumefaciens strain AD35, was isolated from trap material incubated for 50 days in a high {sup 129}I concentration plume. Iodate (200μm) was reduced 47.8% in anaerobic cultures and by 36.3% in transitional cultures in the presence of 10 mM nitrate, which was reduced 80.9% and 81.4% respectively. Iodate was also shown to be reduced by 69.2% and 84.0% in anaerobic and transitional growth conditions respectively with steady spiking of nitrate throughout. No iodate reduction was demonstrated without nitrate present. These data indicate there is a coupled reduction of nitrate and iodate by strain AD35. These data provide novel information on microbial iodate reduction in the groundwater at the 200 West Area. These organisms, along with other nitrate/iodate reducing organisms, which have been presently identified and are being characterized, can be employed in an engineered bioremediation approach for the removal of nitrate and iodate in the groundwater. Additionally, applications for stabilizing radioactive iodine in the subsurface are lacking. Results presented allow us to develop an understanding of iodine speciation throughout the Hanford Site, along with providing novel microbial systems for the bioremediation of iodine and also nitrate, which is not well understood to date. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Effect of Bicarbonate on Autunite Dissolution in the Presence of Shewanella oneidensis under Oxygen Restricted Conditions - 16429

Uranium is a key contaminant at many U.S. Department of Energy sites that served a leading role in the nation's defense for over 50 years. Uranium contamination of soil and groundwater is of great environmental concern due to the toxicological properties of the uranyl species. In an effort to decrease the concentration of soluble uranium, tripolyphosphate injections were identified as a feasible remediation strategy for sequestering uranium in situ in contaminated groundwater at the Hanford Site (WA). The introduction of sodium tripolyphosphate into uranium-bearing porous media results in the formation of uranyl phosphate minerals (autunite) of general formula (X{sub 1-2}[(UO{sub 2})(PO{sub 4})]{sub 2-1}.nH{sub 2}O), where X is a monovalent or divalent cation. The stability of the uranyl phosphate minerals in the subsurface is a critical factor since it determines the long-term effectiveness of the sodium tripolyphosphate injection as a remediation strategy. The behavior of uranium and its mobility in the subsurface are affected by various factors such as the chemistry of pore water, groundwater and soil minerals, the presence of complex-forming ligands, and micro-organisms that thrive under these conditions. Bicarbonate presence in the aqueous phase facilitates uranium desorption from soil and sediments and promotes the release of U(VI) into the aqueous phase, thus increasing uranium mobility in natural waters. In neutral or basic pH conditions, uranium can readily complex with a wide variety of ligands such as carbonate and form soluble uranyl-carbonato complexes such as UO{sub 2}(CO{sub 3}){sub 2}{sup 2-} and UO{sub 2}(CO{sub 3}){sub 3}{sup 4-}. Bicarbonate complexes have been identified in contaminated pore water at the Hanford Site. Furthermore, the presence of bacteria can significantly affect uranium mobility since bacteria may bio-enhance the release of U (VI) from uranyl-phosphate minerals, thus liberating uranium in the aqueous phase in an effort to obtain phosphorous, a vital nutrient for their metabolism. The Columbia River at the site exhibits large stage variations, causing fluctuations in the water table. These water table fluctuations and multiple rise-and-fall cycles in the river created an oxic-anoxic interface in this region. Previous assessments of Hanford sediment samples collected from this area noted a decline in cultivable aerobic bacteria and suggested the presence of facultative anaerobic bacteria. Shewanella oneidensis MR1 is a common bacterial group in soils and Shewanella species have been found in the Hanford soil. Shewanella oneidensis is a facultative anaerobic species which also belongs to a group known as dissimilatory metal-reducing bacteria (DMRB), due to their ability to reduce metals as a part of their metabolic pathway. Therefore, understanding the role of Shewanella is a critical factor affecting the outcome of environmental remediation. The objective of this research was to demonstrate the significance of bacteria-uranium interactions and investigate the effect of bicarbonate in the aqueous phase on Ca-autunite dissolution in the oxygen-restricted conditions. Sterile 100-mL glass mixed bioreactors with weighed amounts of ground Ca-autunite particles were used for initial experimentation. These autunite-containing bioreactors were injected with bacterial cells after the autunite equilibrated with the media solution amended with 0 mM, 3 mM 5 mM and 10 mM concentrations of bicarbonate. Additional abiotic samples were prepared without bacterial inoculation to provide a control for the biotic samples. The concentration of U(VI) determined in the aqueous phase was in direct correlation to the concentration of bicarbonate present in the solution. It was noted that an increase in bicarbonate concentration led to higher U(VI) concentration in the aqueous phase. A sharp decrease in U(VI) concentration was observed in the bicarbonate-free samples, probably due to a microbe mediated reduction of U(VI) to U(IV). In the case of samples amended with 3 mM bicarbonate, a slight, yet significant, decrease in U(VI) was also observed compared to the abiotic control. However, compared to the abiotic controls, there was no change in U(VI) levels in the aqueous phase as a result of bacterial inoculation for the samples amended with 5 and 10 mM bicarbonate for a period of time as long as 50 days. These results imply that the uranyl-carbonate complexes (UO{sub 2}(CO{sub 3}){sub 2}{sup 2-} and UO{sub 2}(CO{sub 3}){sub 3}{sup 4-}) that are present in carbonate-rich environments might be interfering with the microbial reduction in the oxygen- restricted conditions; however, this conclusion requires further investigation. Finally, the data indicate that release of U, P and Ca from autunite was non-stoichiometric. In conclusion, the high stability of uranyl-phosphate complexes makes them a strong candidate for the remediation efforts to sequester uranium in the subsurface. Nevertheless, in a bicarbonate-rich environment, Ca-autunite has a high probability of dissolution and the presence of metal-reducing bacteria does not seem to impede this process in the presence of higher bicarbonate concentrations under oxygen restricted conditions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Testing Novel CR-39 Detector Deployment System for Identification of Subsurface Fractures, Soda Springs, ID

The Environmental Protection Agency (EPA) has teamed with Battelle Energy Alliance, LLC (BEA) at Idaho National Laboratory (INL) to facilitate further testing of geologic-fracture-identification methodology at a field site near the Monsanto Superfund Site located in Soda Springs, Idaho. INL has the necessary testing and technological expertise to perform this work. Battelle Memorial Institute (BMI) has engaged INL to perform this work through a Work for Others (WFO) Agreement. This study continues a multi-year collaborative effort between INL and EPA to test the efficacy of using field deployed Cr-39 radon in soil portals. This research enables identification of active fractures capable of transporting contaminants at sites where fractures are suspected pathways into the subsurface. Current state of the art methods for mapping fracture networks are exceedingly expensive and notoriously inaccurate. The proposed WFO will evaluate the applicability of using cheap, readily available, passive radon detectors to identify conductive geologic structures (i.e. fractures, and fracture networks) in the subsurface that control the transport of contaminants at fracture-dominated sites. The proposed WFO utilizes proven off-the-shelf technology in the form of CR-39 radon detectors, which have been widely deployed to detect radon levels in homes and businesses. In an existing collaborative EPA/INL study outside of this workscope, CR-39 detectors are being utilized to determine the location of active transport fractures in a fractured granitic upland adjacent to a landfill site at the Fort Devens, MA that EPA-designated as National Priorities List (NPL) site. The innovative concept of using an easily deployed port that allows the CR-39 to measure the Rn-222 in the soil or alluvium above the fractured rock, while restricting atmospheric Rn-222 and soil sourced Ra from contaminating the detector is unique to INL and EPA approach previously developed. By deploying a series of these inexpensive detector-casing combinations statistical samples of the Rn-222 flux can be measured, elucidating the most communicative fractures (i.e. fractures that are actively transporting water and gasses). The Rn-222 measurements can then be used as an input to create a more accurate conceptual model to be used for transport modeling and related cleanup activities. If the team’s approach is demonstrated to be applicable to a wide variety of rock types and soil conditions it might potentially offer significant cost saving without a reduction in data quality at Monsanto Superfund and other sites underlain by fracture-dominated bedrock.

58 GEOSCIENCES↗

Advances in Land Data Assimilation at the NASA Goddard Space Flight Center

Research in land surface data assimilation has grown rapidly over the last decade. In this presentation we provide a brief overview of key research contributions by the NASA Goddard Space Flight Center (GSFC). The GSFC contributions to land assimilation primarily include the continued development and application of the Land Information System (US) and the ensemble Kalman filter (EnKF). In particular, we have developed a method to generate perturbation fields that are correlated in space, time, and across variables and that permit the flexible modeling of errors in land surface models and observations, along with an adaptive filtering approach that estimates observation and model error input parameters. A percentile-based scaling method that addresses soil moisture biases in model and observational estimates opened the path to the successful application of land data assimilation to satellite retrievals of surface soil moisture. Assimilation of AMSR-E surface soil moisture retrievals into the NASA Catchment model provided superior surface and root zone assimilation products (when validated against in situ measurements and compared to the model estimates or satellite observations alone). The multi-model capabilities of US were used to investigate the role of subsurface physics in the assimilation of surface soil moisture observations. Results indicate that the potential of surface soil moisture assimilation to improve root zone information is higher when the surface to root zone coupling is stronger. Building on this experience, GSFC leads the development of the Level 4 Surface and Root-Zone Soil Moisture (L4_SM) product for the planned NASA Soil-Moisture-Active-Passive (SMAP) mission. A key milestone was the design and execution of an Observing System Simulation Experiment that quantified the contribution of soil moisture retrievals to land data assimilation products as a function of retrieval and land model skill and yielded an estimate of the error budget for the SMAP L4_SM product. Terrestrial water storage observations from GRACE satellite system were also successfully assimilated into the NASA Catchment model and provided improved estimates of groundwater variability when compared to the model estimates alone. Moreover, satellite-based land surface temperature (LST) observations from the ISCCP archive were assimilated using a bias estimation module that was specifically designed for LST assimilation. As with soil moisture, LST assimilation provides modest yet statistically significant improvements when compared to the model or satellite observations alone. To achieve the improvement, however, the LST assimilation algorithm must be adapted to the specific formulation of LST in the land model. An improved method for the assimilation of snow cover observations was also developed. Finally, the coupling of LIS to the mesoscale Weather Research and Forecasting (WRF) model enabled investigations into how the sensitivity of land-atmosphere interactions to the specific choice of planetary boundary layer scheme and land surface model varies across surface moisture regimes, and how it can be quantified and evaluated against observations. The on-going development and integration of land assimilation modules into the Land Information System will enable the use of GSFC software with a variety of land models and make it accessible to the research community.

Reichle, Rolf↗

The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles

This dataset contains data used for the paper "The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles". The Related References field will be updated with a full citation when available.Freeze-thaw is a disturbance process in cold regions where permafrost soils are becoming vulnerable to temperature fluctuations above 0˚C. Freeze-thaw alters soil physical and biogeochemical properties with implications for carbon persistence and emissions in Arctic landscapes. We examined whether different freeze-thaw histories in two soil systems led to contrasting biogeochemical responses under a laboratory-controlled freeze-thaw incubation. We investigated controls on soil organic matter (SOM) composition through Fourier-transform ion cyclotron resonance mass spectroscopy (FT-ICR-MS) to identify nominal carbon oxidation states and relative abundances of aliphatic-type carbon molecules in both surface and subsurface soils. Soil cores (~ 60 cm-depth) were sampled from two sites in Alaskan permafrost landscapes with different in situ freeze-thaw characteristics: Healy (>40 freeze-thaw cycles annually) and Toolik (<150 freeze-thaw cycles annually). FT-ICR-MS was coupled with in situ temperature data and soil properties (i.e., soil texture, mineralogy) to assess (1) differences in SOM composition associated with previous freeze-thaw history and (2) sensitivity to experimental freeze-thaw in the extracted cores. Control (freeze-only) samples showed greater carbon oxidation in Healy soils compared with Toolik, even in lower mineral horizons where freeze-thaw history was comparable across both sites. Healy showed the most loss of carbon compounds following experimental freeze-thaw in the lower mineral depths, including a decrease in aliphatics. Toolik soils responded more slowly to freeze-thaw as shown by intermediary carbon oxidation distributed across multiple carbon compound classes. Variations in the response of permafrost carbon chemistry to freeze-thaw is an important factor for predicting changes in soil function as permafrost thaws in high northern latitudes.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/FTC-FTICR (DOI 10.5281/zenodo.6533064).

54 ENVIRONMENTAL SCIENCES↗

Uncertainties in peat volume and soil carbon estimated using ground penetrating radar and probing

We evaluate the uncertainty in calculations of peat basin volume using high-resolution data . to resolve the three-dimensional structure of a peat basin using both direct (push probes) and indirect geophysical (ground penetrating radar) measurements. We compared volumetric estimates from both approaches with values from literature. We identified subsurface features that can introduce uncertainties into direct peat thickness measurements including the presence of woody peat and soft clay or gyttja. We demonstrate that a simple geophysical technique that is easily scalable to larger peatlands can be used to rapidly and cost effectively obtain more accurate and less uncertain estimates of peat basin volumes critical to improving understanding of the total terrestrial carbon pool in peatlands.

Parsekian, Andrew D.↗

A Play-Based Exploration of CO 2 Storage in the Illinois Basin (Final Technical Report)

This report documents the results of "A Play-Based Exploration of CO₂ Storage in the Illinois Basin" (DE-FE0032366), a project funded by the U.S. Department of Energy Office of Fossil Energy and Carbon Management and conducted by the Illinois State Geological Survey (ISGS) at the University of Illinois Urbana-Champaign in partnership with Visage Energy. The project adapted play-based exploration (PBE), a systematic basin-scale evaluation methodology from the petroleum industry, to screen areas of Illinois for commercial geologic carbon storage (GCS) in Cambro-Ordovician strata. The traditional play concept was expanded to encompass three play element groups, subsurface geologic factors, surface features, and societal factors, yielding 24 play elements with defensible suitability criteria applied through a five-tier classification scheme. An integrated geospatial database was assembled from ISGS, MGSC, MRCI, NATCARB, and public data sources, supported by significant data-improvement work including correction of legacy well locations, digitization of more than 1,300 well construction records using the DOE CATALOG team's OGRRE tool, compilation of a statewide 2D seismic database, and production of a refined fault and fold geodatabase.

58 GEOSCIENCES↗

Applications of space technology to developing nations

The use of imagery from the Landsat spacecraft for the monitoring and management of natural resources in developing countries is discussed. The Landsat imagery can be used to make cartographic maps at scales of 1:250,000 which meet the US National Map Accuracy Standards, providing a means of map updating to correct for river meanders or changing shorelines. The Landsat data can also be used in defining and measuring agricultural areas, identifying pest breeding areas, and monitoring irrigation practices and crop performance. Total volume estimates can be obtained in many cases for surface bodies of water, and subsurface water supplies can be detected from changes in vegetation in some instances.

Freden, S. C.↗

Relation between Soil Order and Sorptive Capacity for Dissolved Organic Carbon

Soils have historically been considered a temporary sink for organic C, but deeper soils may serve as longer term C sinks due to the sorption of dissolved organic C (DOC) onto Fe- and clay-rich mineral soil particles. This project provides an improved understanding and predictive capability of the physical and chemical properties of deep soils that control their sorptive capacities for DOC. Two hundred thirteen subsurface soil samples (72 series from five orders) were selected from the eastern and central United States. A characterized natural DOC source was added to the soils, and the Langmuir sorption equation was fitted to the observed data by adjusting the maximum DOC sorption capacity (Q{sub max}) and the binding coefficient (k). Different isotherm shapes were observed for Ultisols, Alfisols, and Mollisols due to statistically significant differences in the magnitude of k, while Q{sub max} was statistically invariant among these three orders. Linear regressions were performed on the entire database and as a function of soil order to correlate Langmuir fitted parameters with measured soil properties, e.g., pH, clay content, total organic C (TOC), and total Fe oxide content. Together, textural clay and Fe oxide content accounted for 35% of the variation in Q{sub max} in the database, and clay was most important for Alfisols and Ultisols. The TOC content, however, accounted for 27% of the variation in Q{sub max} in Mollisols. Soil pH accounted for 45% of the variation in k for the entire database, 41% for Mollisols, and 22% for Alfisols. Our findings demonstrate that correlations between Langmuir parameters and soil properties are different for different soil orders and that k is a more sensitive parameter for DOC sorption than is Q{sub max} for temperate soils from the central and eastern United States.

54 ENVIRONMENTAL SCIENCES↗

Akuna - Integrated Toolsets Supporting Advanced Subsurface Flow and Transport Simulations for Environmental Management

A next generation open source subsurface simulator and user environment for environmental management is being developed through a collaborative effort across Department of Energy National Laboratories. The flow and transport simulator, Amanzi, will be capable of modeling complex subsurface environments and processes using both unstructured and adaptive meshes at very fine spatial resolutions that require supercomputing-scale resources. The user environment, Akuna, provides users with a range of tools to manage environmental and simulator data sets, create models, manage and share simulation data, and visualize results. Underlying the user interface are core toolsets that provide algorithms for sensitivity analysis, parameter estimation, and uncertainty quantification. Akuna is open-source, cross platform software that is initially being demonstrated on the Hanford BC Cribs remediation site. In this paper, we describe the emerging capabilities of Akuna and illustrate how these are being applied to the BC Cribs site.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AKUNA – INTEGRATED TOOLSETS SUPPORTING ADVANCED SUBSURFACE FLOW AND TRANSPORT SIMULATIONS FOR ENVIRONMETAL MANAGEMENT

A next generation open source subsurface simulator and user environment for environmental management is being developed through a collaborative effort across Department of Energy National Laboratories. The flow and transport simulator, Amanzi, will be capable of modeling complex subsurface environments and processes using both unstructured and adaptive meshes at very fine spatial resolutions that require supercomputing-scale resources. The user environment, Akuna, provides users with a range of tools to manage environmental and simulator data sets, create models, manage and share simulation data, and visualize results. Underlying the user interface are core toolsets that provide algorithms for sensitivity analysis, parameter estimation, and uncertainty quantification. Akuna is open-source, cross platform software that is initially being demonstrated on the Hanford BC Cribs remediation site. In this paper, we describe the emerging capabilities of Akuna and illustrate how these are being applied to the BC Cribs site.

user interface, data management, uncertainty quant↗

The future of subsurface monitoring: AEC’s breakthroughs in CCS technology

Carbon capture and storage (CCS) has emerged as a key solution in the fight against climate change. However, for CCS to succeed, it is crucial to ensure that the sequestered CO2 stays safely trapped underground. The U.S. Department of Energy (DOE) has emphasized the need for advancements in subsurface monitoring, measurement, reporting, and verification. Aside from caprock integrity failure, the other primary failure points usually involve defective cement in the casing annulus of wellbores or plugged and abandoned wells. In addition, many energy producers (e.g., oil and gas, geothermal) and storage and disposal operators (e.g., H2 and water) must deal with the same issue. Poorly placed or degraded cement can create pathways for gas or fluid to escape from casing annuli and in plugged and abandoned or orphan wells, posing environmental risks. Yet, a reliable and cost-effective way to monitor cement and well integrity over multiple decades is still unavailable. Traditional geophysical methods like 4D seismic imaging and surface-based electromagnetic monitoring lack the resolution and accuracy for detecting these types of failures (Vasco et al., 2022; Fawad and Mondol, 2021). Wireline logging is expensive to run continuously and is obtrusive to the operation. While fiber optics can potentially be a solution, its bulkiness can significantly compromise the cement's integrity. To address these challenges, the Advanced Energy Consortium (AEC) at The University of Texas at Austin’s Bureau of Economic Geology (the Bureau) has been pioneering research in subsurface monitoring using its portfolio of distributed autonomous microfabricated sensors for harsh subsurface environments since 2008. A class of these microsensors [System on a Chip (SoC)] can be mixed in cement and permanently placed without compromising the cement column; the sensors would then communicate with each other or a data acquisition (DAQ) master node. Another class of the AEC microsensors can be fully autonomous, with rechargeable micro-batteries capable of exceeding 100°C, flash memory, and, currently, a pressure and temperature sensor. They are designed to circulate in mud, geothermal fluids, U-loops, or pipelines. They can log data into memory and are unobtrusive to operations. Our team has been working on a multi-year DOE-funded project (DE-FE0031856)—supported by $2.95M in federal funding and $0.75M in cost-matching from the AEC—to demonstrate SoC sensor utility for CO2 leakage monitoring in CCS applications. This multi-institutional collaboration developed a novel sensing architecture utilizing radiofrequency (RF) microsensors embedded within the cement sheath. These sensors detect CO2 migration and are interrogated via a Smart Casing Collar (SCC).

58 GEOSCIENCES↗