Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Composite Structured Surfaces for Durable Dropwise Condensation

Condensation heat transfer is a vital process for a plethora of industrial application. Dropwise condensation of steam on hydrophobic polymers, typified by the formation of discrete water droplets which shed and clear the surface for re-nucleation, has a 10X higher heat transfer coefficient when compared to filmwise condensation on bare metallic surfaces. However, 8 decades of research have conclusively demonstrated a lack of durability of the hydrophobic coatings during dropwise condensation to quantify industrial implementation. They key bottleneck is the coating conundrum, which states that thick hydrophobic coatings (> 10 µm) are required for higher durability, while thin hydrophobic coatings (< 1 µm) are required for low parasitic thermal resistance due to the low intrinsic thermal conductivity of polymeric materials (k ~ 0.1 W/m·K). Here, we attempt to solve the conundrum by developing rationally-designed metal-polymer composite coatings to increase the effective thermal conductivity of the hydrophobic coating, thereby enabling thicker coatings for higher durability. We study nanowire, inverse opal, and sintered sphere metallic structures infilled with hydrophobic polymers. To quantify the heat transfer performance, we analyze the vapor-to-coolant and vapor-to-surface heat transfer coefficients of composite coated flat surfaces having varying wire/sphere diameters (D = 100 nm, 1 μm, 10 μm) and coating thickness (10 nm < t < 100 μm) using three-dimensional (3D), steady state, Comsol simulations. We show that analytical models such as Maxwell or effective medium theory fail to predict the composite thermal conductivity. By conducting simulation with two independent sets of boundary conditions; isothermal surfaces and convection, as well as by varying the interfacial metal fractions, we demonstrate the importance of 3D heat spreading near the coating-vapor and coating-substrate interface. To predict the wetting characteristics to ensure stable dropwise condensation, we coupled our 3D heat transfer simulations to a unified model for contact angle hysteresis on heterogeneous surfaces. Our wetting predictions identify the key tradeoff between low spreading resistance (high k, filmwise condensation) and low contact angle hysteresis (low k, dropwise condensation) on high and low surface metal fractions, respectively, and identify the optimum metallic structure, volume fraction, interfacial solid fraction, and thickness for enhanced durability. Our work provides a novel approach to utilize rational metallic nanostructuring to create composite hydrophobic coatings which promise enhanced durability.

Chang, Ho Chan↗

CNO destruction by spallation and type I X-ray bursts

Recent work on the surface boundary conditions of accreting neutron stars indicates that appreciable amounts of CNO elements can be destroyed by spallation. Previous authors assume an accretion of near-solar-abundance material which is not altered by boundary effects. Steady state models of accreting neutron stars are constructed assuming all but traces of metals are destroyed due to spallation in the surface layers. Models with solar accretion for comparison are also constructed. The models are compared with Exosat observations of 4U/MXB 1636 - 53. It is found that the simplifications introduced by assuming CNO destruction does not bring theory closer to describing what is observed.

Tillett, Jason C.↗

Fuel containment, lightning protection and damage tolerance in large composite primary aircraft structures

The damage-tolerance characteristics of high strain-to-failure graphite fibers and toughened resins were evaluated. Test results show that conventional fuel tank sealing techniques are applicable to composite structures. Techniques were developed to prevent fuel leaks due to low-energy impact damage. For wing panels subjected to swept stroke lightning strikes, a surface protection of graphite/aluminum wire fabric and a fastener treatment proved effective in eliminating internal sparking and reducing structural damage. The technology features developed were incorporated and demonstrated in a test panel designed to meet the strength, stiffness, and damage tolerance requirements of a large commercial transport aircraft. The panel test results exceeded design requirements for all test conditions. Wing surfaces constructed with composites offer large weight savings if design allowable strains for compression can be increased from current levels.

Griffin, Charles F.↗

Detection of vapor nanobubbles by small angle neutron scattering (SANS)

Experiments using boiling water on untreated (roughness 100–300 nm) metal surfaces using small-angle neutron scattering (SANS) show the appearance of structures that are 50–70 nm in size when boiling is present. The scattering signal disappears when the boiling ceases, and no change in the signal is detected at any surface temperature condition below saturation. This confirms that the signal is caused by vapor nanobubbles. Two boiling regimes are evaluated herein that differ by the degree of subcooling (3–10 °C). A polydisperse spherical model with a log-normal distribution fits the SANS data well. In conclusion, the size distribution indicates that a large number of nanobubbles exist on the surface during boiling, and some of them grow into large bubbles.

74 ATOMIC AND MOLECULAR PHYSICS↗

Summary of Sonic Boom Rise Times Observed During FAA Community Response Studies over a 6-Month Period in the Oklahoma City Area

The sonic boom signature data acquired from about 1225 supersonic flights, over a 6-month period in 1964 in the Oklahoma City area, was enhanced with the addition of data relating to rise times and total signature duration. These later parameters, not available at the time of publication of the original report on the Oklahoma City sonic boom exposures, are listed in tabular form along with overpressure, positive impulse, positive duration, and waveform category. Airplane operating information along with the surface weather observations are also included. Sonic boom rise times include readings to the 1/2, 3/4, and maximum overpressure values. Rise time relative probabilities for various lateral locations from the ground track of 0, 5, and 10 miles are presented along with the variation of rise times with flight altitude. The tabulated signature data, along with corresponding airplane operating conditions and surface and upper level atmospheric information, are also available on electronic files to provide it in the format for more efficient and effective utilization.

Maglieri, Domenic J.↗

Radiation fluxes at the FIFE site

The main objective of the International Satellite Land Surface Climatology Project (ISLSCP) has been stated as 'the development of techniques that may be applied to satellite observations of the radiation reflected and emitted from the Earth to yield quantitative information concerning land surface climatological conditions'. The major field study, FIFE (the First ISLSCP Field Experiment), was conducted in 1987-89 to accomplish this objective. Four intensive field campaigns (IFC's) were carried out in 1987 and one in 1989. Factors contributing to observed reflected radiation from the FIFE site must be understood before the radiation observed by satellites can be used to quantify surface processes. Our last report (Walter-Shea et al., 1992b) focused on slope effects on incoming and outgoing shortwave radiation and net radiation from data collected in 1989. We report here on the final analysis of the slope data as well as results from thermal radiation studies conducted during the FIFE experiment. The specific areas reported are the following: (1) analysis of slope effects on measured reflectance values and estimates of surface albedo; (2) using remotely-measured surface temperatures as a means of estimating sensible heat flux from the Konza Prairie; (3) extracting canopy temperatures from remotely-measured composite surface temperatures; (4) modeling the measured composite temperature of partially vegetated surfaces; and (5) estimating gap distribution in partially vegetated surfaces from reflectance measurements.

Walter-Shea, Elizabeth A.↗

Slope effects on shortwave radiation components and net radiation

The main objective of the International Satellite Land Surface Climatology Project (ISLSCP) has been stated as 'the development of techniques that may be applied to satellite observations of the radiation reflected and emitted from the Earth to yield quantitative information concerning land surface climatological conditions.' The major field study, FIFE (the First ISLSCP Field Experiment), was conducted in 1978-89 to accomplish this objective. Four intensive field campaigns (IFC's) were carried out in 1987 and one in 1989. Factors contributing to observed reflected radiation from the FIFE site must be understood before the radiation observed by satellites can be used to quantify surface processes. Analysis since our last report has focused on slope effects on incoming and outgoing shortwave radiation and net radiation from data collected in 1989.

Walter-Shea, Elizabeth A.↗

Experimental simulations of oxidizing conditions and organic decomposition on the surface of Mars

One important scientific objective of a Mars Rover Sample Return mission would be to look for traces of living and extinct life on Mars. An instrument to search for organic carbon may be the simplest instrument that could screen samples which are interesting from a biological point of view. An experimental program is described which would help to understand the nature of the oxidizing soil on Mars and the mechanism responsible for organic degradation on the Martian surface. This is approached by lab simulations of the actual conditions that occur on Mars, particularly the oxidant production by atmospheric photochemistry, and the combined effects of UV light and oxidants in decomposing organic compounds. The results will be used to formulate models of the photochemistry of the atmospheric, the atmosphere-soil interaction, and the diffusion of reactive compounds into the soils. This information will provide insights and constraints on the design of a sampling strategy to search for organic compounds on Mars.

Stoker, C. R.↗

Assimilation of Gridded GRACE Terrestrial Water Storage Estimates in the North American Land Data Assimilation System

The objective of the North American Land Data Assimilation System (NLDAS) is to provide best available estimates of near-surface meteorological conditions and soil hydrological status for the continental United States. To support the ongoing efforts to develop data assimilation (DA) capabilities for NLDAS, the results of Gravity Recovery and Climate Experiment (GRACE) DA implemented in a manner consistent with NLDAS development are presented. Following previous work, GRACE terrestrial water storage (TWS) anomaly estimates are assimilated into the NASA Catchment land surface model using an ensemble smoother. In contrast to many earlier GRACE DA studies, a gridded GRACE TWS product is assimilated, spatially distributed GRACE error estimates are accounted for, and the impact that GRACE scaling factors have on assimilation is evaluated. Comparisons with quality-controlled in situ observations indicate that GRACE DA has a positive impact on the simulation of unconfined groundwater variability across the majority of the eastern United States and on the simulation of surface and root zone soil moisture across the country. Smaller improvements are seen in the simulation of snow depth, and the impact of GRACE DA on simulated river discharge and evapotranspiration is regionally variable. The use of GRACE scaling factors during assimilation improved DA results in the western United States but led to small degradations in the eastern United States. The study also found comparable performance between the use of gridded and basin averaged GRACE observations in assimilation. Finally, the evaluations presented in the paper indicate that GRACE DA can be helpful in improving the representation of droughts.

Kumar, Sujay V.↗

Photocathode Research for Electron Accelerators

This dissertation presents studies of two different types of photocathodes used at electron accelerators: GaAs and K2CsSb. The spin polarization of photoelectrons extracted from GaAs photocathodes was evaluated using traditional one-photon absorption and two-photon absorption, to determine the validity of speculation that two-photon absorption would provide significantly higher polarization. To accomplish this study, a novel compact, retarding-field Mott polarimeter was designed, built and commissioned. The second type of photocathode, K2CsSb, was manufactured at Brookhaven National Laboratory and transported to Jefferson Lab in an ultrahigh vacuum "suitcase" and installed within a DC high voltage gun. Charge lifetime measurements were made using a K2CsSb photocathode and compared to those of GaAs under identical operating conditions. The surface morphology of the used K2CsSb was also studied. Many important atomic, nuclear and high energy physics experiments rely on using highly spin-polarized electron beams obtained via photoemission from GaAs photocathodes. Remarkably, even after 30 years of GaAs photogun operation, there are still some lingering questions associated with the beam polarization values being lower than expected. Bulk GaAs can theoretically provide 50% polarization but typically provides ~ 35%. Reduced polarization is attributed to a number of proposed depolarization mechanisms. Recently, it was proposed that two-photon absorption could be exploited to selectively populate the conduction band with electrons of just one spin state providing 100% polarization. These claims were refuted by others on theoretical grounds. In this thesis, for the first time, two-photon photoemission was demonstrated with beam delivered to a novel polarimeter constructed for this experiment. Polarization was found to be comparable to that obtained with conventional one-photon absorption, and to converge to the same value with a reduction in thickness of the active layer, thereby providing additional experimental insight to the polarized photoemission process an depolarization mechanisms in GaAs. Many proposed accelerators (light sources, energy recovery linacs and electron cooling machines) require extremely high average beam current (~ 100mA). The highest average current accelerator today, the FEL at JLab, can operate at up to 10mA and relies on photoemission from GaAs, even though spin polarization is not required. GaAs is an extremely delicate material, prone to failure and requiring ultrahigh vacuum conditions. In the early 1990s, the multi-alkali photocathode K2CsSb was used to demonstrate 32mA average current inside an RF gun with poor vacuum characteristics. This experiment lasted just minutes and was terminated shortly after the high current milestone was met. Based on this early work, many people believe K2CsSb represents a much better photocathode choice for unpolarized accelerator applications, providing high current for long periods of time and under less stringent operating conditions, but a detailed comparative study using the same apparatus has not been done. To address the high current reliability issue, two K2CsSb photocathodes were manufactured at Brookhaven National Lab and transported to Jefferson Lab via an ultrahigh vacuum transport chamber. They were installed within a 200kV DC high voltage photogun. Systematic charge lifetime measurements were performed using both photocathode materials under identical conditions. The performance of K2CsSb was shown to be highly dependent on extracted current. By combining this decay behavior with surface science measurements of the used photocathodes, it was shown that heat quickly disrupts the capability of the K2CsSb photocathode.

McCarter, James↗

Experimental Investigation of Natural Convection Heat Transfer in Heated Vertical Tubes with Discrete Rings

Natural convection heat transfer from heated vertical pipes has been investigated experimentally. The pipes are open-ended and circular in cross section. The test sections are electrically heated imposing the circumferentially and axially constant wall heat flux. The outer surface of the test section is insulated and heat is allowed to dissipate from the internal surface. Experiments are carried out for four different channels of 45 mm internal diameter and 3.8 mm thickness with length varying from 450 mm to 850 mm. Ratios of length to diameter of the channel are taken as L/D = 10, 12.22, 15.56, and 18.89. Wall heat fluxes are maintained at q{sup //} = 250 to 3341 W/m{sup 2}. Experiments are also carried out on intensified tubes of the same geometrical sizes with the discrete rings of rectangular cross section provided on the internal surface. Thickness of the rings are taken as t = 4, 6 and 8 mm; step size (s) of the rings are varying from 75 mm to 283.3 mm and the other ratios are taken as s/D = 1.67 to 6.29, t/D = 0.088 to 0.178 and s / t = 9.38 to 70.82. The effects of L/D ratio, ring thickness, ring spacing and wall heating conditions on local steady-state heat transfer phenomena are studied. A correlation is developed for average Nusselt number and modified Rayleigh number and another correlation is also developed for modified Rayleigh number and modified Reynolds number. These correlations predict the data accurately within ±10% error.

42 ENGINEERING↗

Compressible convection in a viscous Venusian mantle

Finite element simulations of axisymmetric spherical shell compressible convection were carried out to investigate the effect of various surface boundary conditions in a Venusian mantle, employing a thermal expansivity alpha which decreased with depth, a uniform viscosity an order of magnitude greater than the earth's, and zero and chondric quantities of internal heating. As long as hot plumes from the core-mantle boundary were strong, the convection pattern was typical of that for variable alpha flow; that is, it was characterized by steady upflowing regions, unsteady collections of downflowing plumes, and large aspect ratio cells. Increases in the internal heating or the temperature T0 at the top of the convecting layer weakened the hot plumes and, therefore, decreased the width of the cells. A rigid surface increased the internal temperature and also decreased the width of convection cells. Extensive regions of subadiabaticity were found in the mantle. These results are compared with those for fully three-dimensional convection under similar conditions (Schubert et al., 1990).

Leitch, A. M.↗

Extended use of face masks during the COVID-19 pandemic - Thermal conditioning and spray-on surface disinfection

The current COVID-19 pandemic has resulted in globally constrained supplies for face masks and personal protective equipment (PPE). Production capacity is limited in many countries and the future course of the pandemic will likely continue with shortages for high quality masks and PPE in the foreseeable future. Therefore, expectations are that mask reuse, extended wear and similar approaches will enhance the availability of personal protective measures. Repeated thermal disinfection could be an important option and likely easier implemented in some situations, at least on the small scale, than UV illumination, irradiation or hydrogen peroxide vapor exposure. In this paper, an overview on thermal responses and ongoing filtration performance of multiple face mask types is provided. Most masks have adequate material properties to survive a few cycles (i.e. 30 min disinfection steps) of thermal exposure in the 75°C regime. Some are more easily affected, as seen by the fusing of plastic liner or warping, given that preferred conditioning temperatures are near the softening point for some of the plastics and fibers used in these masks. Hence adequate temperature control is equally important. As guidance, disinfectants sprayed via dilute solutions maintain a surface presence over extended time at 25 and 37°C. Some spray-on alcohol-based solutions containing disinfectants were gently applied to the top surface of masks. Neither moderate thermal aging (less than 24 h at 80 and 95°C) nor gentle application of surface disinfectant sprays resulted in measurable loss of mask filter performance. Subject to bio-medical concurrence (additional checks for virus kill efficiency) and the use of low risk non-toxic disinfectants, such strategies, either individually or combined, by offering additional anti-viral properties or short term refreshing, may complement reuse options of professional masks or the now ubiquitous custom-made face masks with their often unknown filtration effectiveness.

36 MATERIALS SCIENCE↗

THE FORCE-FREE MAGNETOSPHERE OF A ROTATING BLACK HOLE

We revisit the Blandford-Znajek process and solve the fundamental equation that governs the structure of the steady-state force-free magnetosphere around a Kerr black hole. The solution depends on the distributions of the magnetic field angular velocity {omega} and the poloidal electric current I. These are not arbitrary. They are determined self-consistently by requiring that magnetic field lines cross smoothly the two singular surfaces of the problem: the inner ''light surface'' located inside the ergosphere and the outer ''light surface'' which is the generalization of the pulsar light cylinder. We find the solution for the simplest possible magnetic field configuration, the split monopole, through a numerical iterative relaxation method analogous to the one that yields the structure of the steady-state axisymmetric force-free pulsar magnetosphere. We obtain the rate of electromagnetic extraction of energy and confirm the results of Blandford and Znajek and of previous time-dependent simulations. Furthermore, we discuss the physical applicability of magnetic field configurations that do not cross both ''light surfaces''.

79 ASTRONOMY AND ASTROPHYSICS↗

Remote Sensing of Clouds, Water Vapor, and Near-Surface Winds Under Various Aerosol Conditions During CAMP2Ex

The Cloud, Aerosol and Monsoon Processes Philippines Experiment (CAMP2Ex) field campaign took place from August – October 2019. CAMP2Ex science objectives include understanding aerosol-cloud interaction under various Meteorological conditions, and how these Meteorological phenomena affect aerosol distribution in the atmosphere. Numerous instruments were flown on the National Aeronautics and Space Administration (NASA) P-3 aircraft during 19 CAMP2Ex science flights, including the Advanced Microwave Precipitation Radiometer (AMPR) the Airborne Third Generation Precipitation Radar (APR-3), and the High Spectral Resolution Lidar 2 (HSRL2). Geophysical retrieval equations for cloud liquid water, columnar water vapor, and near-surface wind speed using AMPR brightness temperatures have been derived and tested using CAMP2Ex data. Water vapor and wind speed retrievals have been validated using in situ observations, such as dropsondes and shipborne instruments. This presentation will demonstrate these AMPR-based retrievals during CAMP2Ex, including discussions of retrieval uncertainties. Specific CAMP2Ex flights will be presented in greater detail, including inferences of other Meteorological phenomena in clear air and around precipitating and non-precipitating clouds, such as background wind speeds and potential identification of gust fronts. These analyses will be supplemented with APR-3 reflectivity and Doppler velocity data to infer microphysical processes occurring within and around selected clouds of interest. In cases where multiple remote-sensing measurements were obtained for the same cloud, a time-evolution analysis of these features may be performed. Throughout these analyses, HSRL2 data will be used to quantify aerosol properties beneath the P-3, and variations in the AMPR/APR-3 observations with respect to various aerosol conditions will be discussed.

Corey Amiot↗

Effect of 3D Roughness Patch on Instability Amplification in a Supersonic Boundary Layer

Surface roughness is known to have a substantial impact on the aerothermodynamic loading of high-speed vehicles, particularly via its influence on the laminar-turbulent transition process within the boundary layer. Numerical simulations are performed to investigate the effects of a distributed region of densely packed, sinusoidal shape roughness elements on a Mach 3.5 flat plate boundary layer for flow conditions corresponding to the planned conditions of an upcoming experiment in the Mach 3.5 Supersonic Low Disturbance Tunnel at the NASA Langley Research Center. Analysis of convective instabilities in the wake of the roughness patch was reported in a previous paper and the current work extends that analysis to instability amplification across the length of the roughness patch. Quasi-parallel stability analysis of the modified boundary layer flow over the patch indicates two dominant families of unstable disturbances, namely, a group of high frequency modes that amplify in localized regions along the roughness patch and another group of low frequency modes that have smaller peak amplification rates but amplify steadily both above the roughness patch and in the wake region behind it. The results suggest that the amplification factors associated with the high-frequency modes are sufficiently low, at least for the roughness patches considered in this paper, so that these modes are unlikely to have a major influence on the transition process. The amplification of the low-frequency modes within the region of the roughness patch is further quantified via direct numerical simulations. Results confirm the strongly destabilizing influence of the roughness patch on the first mode instabilities, yielding an N-factor increment of ΔN ≈ 3.6 for a roughness patch length of eight wavelengths.

Laminar turbulent transition↗

Role of underlying surface, rainstorm and antecedent wetness condition on flood responses in small and medium sized watersheds in the Yangtze River Delta region, China

Floods are becoming more frequent and are hard to control due to the shortage of water conservancy projects in small and medium sized basins, especially in developing regions. Understanding the hydrologic responses and estimated flood characteristics to storm events can help to predict flood disasters and form better effective mitigation and adaptation strategies. Here, using observations of several representative watersheds and Artificial Neural Networks (ANN) and Principal Component Regression (PCR) models, we conducted data-driven analyses to examine the flood responding characteristics. We quantified the relative contributions of the influencing factors to the variation of each flood characteristic. Statistical analysis of the observations shows that the drainage area plays a key role in determining the distribution of lag time and peak discharge. Rainstorm variability has direct influence on floods, and typhoon-induced rainstorms with high total rainfall and rainfall intensity generate higher lag time, flood peak, unit discharge and runoff depth, but lower runoff coefficient. The ANN and PCR models accurately predicted the variations of flood features using the driving factors including physical geographical characteristics, rainstorm features, and antecedent condition. Physical geographic characteristics are key influential factors of lag time, flood peak and runoff coefficient, while the rainstorm features control the magnitude of unit discharge and runoff depth. These results indicate that floods are mainly affected by rainstorm features and physical geographic characteristics in the Yangtze River delta, and it might become more damaging with the increasing rainfall extremes and sprawling impervious surfaces in a changing environment.

54 ENVIRONMENTAL SCIENCES↗

Intercomparison of Satellite Dust Retrieval Products over the West African Sahara During the Fennec Campaign in June 2011

Dust retrievals over the Sahara Desert during June 2011 from the IASI, MISR, MODIS, and SEVIRI satellite instruments are compared against each other in order to understand the strengths and weaknesses of each retrieval approach. Particular attention is paid to the effects of meteorological conditions, land surface properties, and the magnitude of the dust loading. The period of study corresponds to the time of the first Fennec intensive measurement campaign, which provides new ground-based and aircraft measurements of the dust characteristics and loading. Validation using ground-based AERONET sunphotometer data indicate that of the satellite instruments, SEVIRI is most able to retrieve dust during optically thick dust events, whereas IASI and MODIS perform better at low dust loadings. This may significantly affect observations of dust emission and the mean dust climatology. MISR and MODIS are least sensitive to variations in meteorological conditions, while SEVIRI tends to overestimate the aerosol optical depth (AOD) under moist conditions (with a bias against AERONET of 0.31), especially at low dust loadings where the AOD<1. Further comparisons are made with airborne LIDAR measurements taken during the Fennec campaign, which provide further evidence for the inferences made from the AERONET comparisons. The effect of surface properties on the retrievals is also investigated. Over elevated surfaces IASI retrieves AODs which are most consistent with AERONET observations, while the AODs retrieved by MODIS tend to be biased low. In contrast, over the least emissive surfaces IASI significantly underestimates the AOD (with a bias of -0.41), while MISR and SEVIRI show closest agreement.

Fennec Campaign↗