Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Modeling the Effects of Tidal Energy Extraction on Estuarine Hydrodynamics in a Stratified Estuary

A three-dimensional coastal ocean model with a tidal turbine module was used in this paper to study the effects of tidal energy extraction on temperature and salinity stratification and density driven two-layer estuarine circulation. Numerical experiments with various turbine array configurations were carried out to investigate the changes in tidally mean temperature, salinity and velocity profiles in an idealized stratified estuary that connects to coastal water through a narrow tidal channel. The model was driven by tides, river inflow and sea surface heat flux. To represent the realistic size of commercial tidal farms, model simulations were conducted based on a small percentage of the total number of turbines that would generate the maximum extractable energy in the system. Model results indicated that extraction of tidal energy will increase the vertical mixing and decrease the stratification in the estuary. Extraction of tidal energy has stronger impact on the tidally-averaged salinity, temperature and velocity in the surface layer than the bottom. Energy extraction also weakens the two-layer estuarine circulation, especially during neap tides when tidal mixing the weakest and energy extraction is the smallest. Model results also show that energy generation can be much more efficient with higher hub height with relatively small changes in stratification and two-layer estuarine circulation.

Yang, Zhaoqing↗

Sub-bandgap luminescence centers in silicon created by self-ion implantation and thermal annealing

We investigated the conditions for the generation of silicon sub-bandgap luminescence centers (W, R, and D1 centers) in p-type silicon wafer by self-ion implantation and thermal annealing. Luminescence centers and their spatial distributions were probed by measuring their photoluminescence (PL) spectra before and after sequential removal of top surface layers. It was demonstrated that the optimal annealing temperature for W-line is {approx}300 deg. C. The strongest R-line is observed in the sample with a dose of 10{sup 14} cm{sup -2} and at an annealing temperature of 700 deg. C. The creation of D1-band requires a minimum dose of 3x10{sup 14} cm{sup -2} and a minimum annealing temperature of 800 deg. C. PL versus etch depth measurements indicate that within the studied dose range, the W-line luminescence centers are distributed beyond twice the ion projected range (R{sub p{approx_equal}}400 nm), R-line centers are located slightly deeper than the R{sub p}, and D1 related defects are distributed at about the same depth as R{sub p}. These results provide valuable information for fabricating the silicon-based infrared light sources.

36 MATERIALS SCIENCE↗

B{sub 4}C protective coating under irradiation by QSPA-T intensive plasma fluxes

The effect of the QSPA-T pulsed plasma irradiation on the crystalline boron carbide B{sub 4}C coating was examined. The duration of the rectangular plasma pulses was 0.5 ms with an interval of 5–10 min between pulses. The maximum power density in the central part of plasma stream was 1 GW/m{sup 2}. The coating thickness varied from 20 to 40 μm on different surface areas. Modification of the surface layers and transformation of the coating at elevated temperature under plasma pulse irradiation during four successive series of impulses are described. It is shown that the boron carbide coating withstood the full cycle of tests under irradiation with 100 plasma pulses with peak power density of 1GW/m{sup 2}. Constitutive surface deterioration was not detected and the boron carbide coating kept crystal structure B{sub 4}C throughout the irradiation zone at the surface depth no less 2 μm.

36 MATERIALS SCIENCE↗

Oceanographic Variations in Recent Decades and Their Impact on the Fertility of the Iceland Sea

Due to its location at or near the oceanic polar front, the Iceland Sea is an area particularly sensitive to climatic changes. In warm years a strong influx of Atlantic water from the Irminger Sea can be traced all along the North Iceland shelf area. This inflow is mainly determined by past meteorological conditions at the west and north coasts of Ireland. In periods when the ice belt along the east cost of Greenland is relatively narrow, the surface layers between Iceland and Jan Mayen consist of arctic water with practically no polar component. Conversely, in cold periods an appreciable proportion of cold, low-salinity polar water is found in this area, and large parts of the North Icelandic shelf area may be covered with drift ice. Sea surface temperatures north of Iceland, especially in spring, are closely correlated to the frequency and extension of drift ice.

Stefansson, U.↗

Spectroscopic study of the seasonal variation of carbon monoxide vertical distribution above Kitt Peak

A method to retrieve elements of the carbon monoxide (CO) vertical distribution from ground-based high-resolution infrared solar spectra has been developed. The method is based on the fact that the total column amount retrieved by nonlinear least squares spectral fitting techniques depends on the shape of the assumed a priori profile and this dependence is a function of the absorption line intensity and the lower state energy of the transition. Four CO lines between 2057 and 2159/cm have been selected and the method has been tested on synthetic spectra. The CO total column content and average concentrations in two atmospheric layers (surface to 400 mbar and 400 mbar to the top of the atmosphere) can be retrieved with precisions of about 1% and less than 10%, respectively. Solar spectra recorded at Kitt Peak from 1982 to 1993 have been analyzed. The CO total column and the average concentration in the two layers show an asymmetrical seasonal cycle with extreme values of (1.1-2.1) x 10(exp 18) molecules cm(exp -2), (50-80) parts per billion by volume (ppbv) in the top layer and (80-160) ppbv in the bottom layer, and precisions of 1, 3, and 6%, respectively; a spring maximum and late summer minimum are observed.

Pougatchev, N. S.↗

Model for Humidity-Mediated Diffusion on Aluminum Surfaces and Its Role in Accelerating Atmospheric Aluminum Corrosion

Bare aluminum metal surfaces are highly reactive, which leads to the spontaneous formation of a protective oxide surface layer. Because many subsequent corrosive processes are mediated by water, the structure and dynamics of water at the oxide interface are anticipated to influence corrosion kinetics. Here, using molecular dynamics simulations with a reactive force field, we model the behavior of aqueous aluminum metal ions in water adsorbed onto aluminum oxide surfaces across a range of ion concentrations and water film thicknesses corresponding to increasing relative humidity. We find that the structure and diffusivity of both the water and the metal ions depend strongly on the humidity of the environment and the relative height within the adsorbed water film. Aqueous aluminum ion diffusion rates in water films corresponding to a typical indoor relative humidity of 30% are found to be more than 2 orders of magnitude slower than self-diffusion of water in the bulk limit. Connections between metal ion diffusivity and corrosion reaction kinetics are assessed parametrically with a reductionist model based on a 1D continuum reaction–diffusion equation. Our results highlight the importance of incorporating the properties specific to interfacial water in predictive models of aluminum corrosion.

36 MATERIALS SCIENCE↗

Dynamic Monitoring of the Ion-Plasma Treatment of Complex Components

Low-temperature ion-plasma treatment of metal workpieces may be monitored in terms of the electrical signals recorded in the circuit consisting of the plasma, the workpiece, the clamp, and ground. The electrical signals are analyzed by means of the Hurst statistic H, which provides a basic quantitative picture of the formation and modification of the signal structure in the course of machining. Experiments show that the best results (a surface layer of maximum hardness) are obtained when machining is accompanied by the generation of signals for which the Hurst statistic indicates antipersistent behavior.

42 ENGINEERING↗

Evaluation of Monin‐Obukhov Similarity Theory Wind Profiles in Convective Storm Environments and Cold Pools at the ARM Southern Great Plains Atmospheric Observatory

Monin-Obukhov similarity theory (MOST) is widely used in numerical weather prediction to model surface fluxes of momentum, heat, and water vapor. However, MOST is based on assumptions of steady state and horizontally homogeneous turbulence that can lead to prediction errors in and around convective storms. To understand the nature of these errors, we used wind and eddy covariance flux measurements from the Atmospheric Radiation Measurement Southern Great Plains Atmospheric Observatory to evaluate MOST wind profiles in fair-weather and convective storm environments, specifically those of mesoscale convective systems and ordinary thunderstorms. MOST wind profiles agreed well with observations in fair-weather cases, while in convective storm cases the theory systematically overestimated shear in cold pools after gust front passage. Surface layer stability was found to be important in assessing MOST within convective storm environments. The overestimation of wind shear in cold pools suggests the role of non-local fluxes in transferring momentum downward. We discuss reasons for differences and agreement with past studies, and conclude with recommendations to improve prediction of surface winds and fluxes in convective storm simulations.

58 GEOSCIENCES↗

Mass fractionation of the lunar surface by solar wind sputtering

The sputtering of the lunar surface by the solar wind is examined as a possible mechanism of mass fractionation. Simple arguments based on current theories of sputtering and the ballistics of the sputtered atoms suggest that most ejected atoms will have sufficiently high energy to escape lunar gravity. However, the fraction of atoms which falls back to the surface is enriched in the heavier atomic components relative to the lighter ones. This material is incorporated into the heavily radiation-damaged outer surfaces of grains where it is subject to resputtering. Over the course of several hundred years an equilibrium surface layer, enriched in heavier atoms, is found to form. The dependence of the calculated results upon the sputtering rate and on the details of the energy spectrum of sputtered particles is investigated. It is concluded that mass fractionation by solar wind sputtering is likely to be an important phenomenon on the lunar surface.

Switkowski, Z. E.↗

Electrically Conductive Anodized Aluminum Surfaces

Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to < or = 10(exp 9) Omega-cm. The present treatment does this. The treatment is a direct electrodeposition process in which the outer anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In comparison with these competing finishes, the present nanocomposite finishes are expected to cost 50 to 20 percent less and to last longer.

Nguyen, Trung Hung↗

Radon Measurements of Atmospheric Mixing (RAMIX) 2006–2014 Final Campaign Summary

Uncertainty in vertical mixing between the surface layer, boundary layer, and free troposphere leads to large uncertainty in “top-down” estimates of regional land-atmosphere carbon exchange (i.e., estimates based on measurements of atmospheric CO 2 mixing ratios). The radioisotope radon-222 ( 222 Rn) is a valuable tracer for measuring atmospheric mixing because it is emitted from the land surface and has a short enough half-life (3.8 days) to allow characterization of mixing processes based on vertical profile measurements.

Fischer, ML↗

Lunar Surface Material - Spacecraft Measurements of Density and Strength

The relation of the density of the lunar surface layer to depth is probably best determined from spacecraft measurements of the bearing capacity as a function of depth. A comparison of these values with laboratory measurements of the bearing capacity of low-cohesion particulate materials as a function of the percentage of solid indicates that the bulk density at the lunar surface is about 1.1 grams per cubic centimeter and that it increases nearly linearly to about 1.6 grams per cubic centimeter at a depth of 5 centimeters.

Jaffe, L. D.↗

The role of SO2 on Mars and on the primordial oxygen isotope composition of water on Earth and Mars

We stress the importance of SO2 on Mars. In the case that water should have been supplied in sufficient quantities to the Martian surface by a late veneer and stored in the near surface layers in form of ice, temporary greenhouse warming by SO2 after large SO2 discharges may have been responsible for melting of ice and break-out of water in areas not directly connected to volcanic activity. Aside from water, liquid SO2 could explain at least some of the erosion features on the Martian surface.

Waenke, H.↗

A study of the influence of crystallite size on the electrical and magnetic properties of CuFe{sub 2}O{sub 4}

Graphical abstract: A plot of crystallite size against the normalized values of resistivity, dielectric constant and the drift mobility of the CuFe{sub 2}O{sub 4} materials. Highlights: {yields} The CuFe{sub 2}O{sub 4} materials of different crystallite sizes of <100 nm are prepared by sol-gel method and others of the size of >100 nm by combustion method. {yields} The synthesized samples are characterized for different electrical, dielectrical, magnetic and structural properties. {yields} The results show a sudden change in dc-electrical resistivity, Curie temperature, dielectric parameters, etc. when their crystallite size approaches 84 nm. {yields} This study shows transition from bulk to the nano regime takes place at the particle size of 84 nm. -- Abstract: An attempt has been made to clarify the fundamental assumption that the properties of materials change as the crystallite size of the material is reduced below 100 nm. CuFe{sub 2}O{sub 4} samples of different crystallite sizes were prepared by the sol-gel and combustion methods and then analyzed by X-ray diffraction (XRD), thermal analyses (TGA/DTG) and scanning electron microscopy (SEM) techniques. The magnetic properties were studied by measuring the AC magnetic susceptibility ({chi}) and the Moessbauer spectroscopy. The DC electrical resistivity, dielectric constant, dielectric loss tangent, Curie temperature and hyperfine splitting of the samples change with the crystallite size. The change in the electrical properties is attributed to the formation of discrete energy levels instead of the bands. However, the magnetic parameters change due to the existence of non magnetic surface layers. The isomer shift and the hyperfine splitting show gradual increase with the increase in crystallite sizes.

36 MATERIALS SCIENCE↗

A numerical simulation of an atmospheric vortex street

A simplified mesoscale mixed-layer model is utilized to study the flow past an ocean island during a case of cold air outbreak over the Kuroshio Current. Using data taken during AMTEX '75, the governing equations are integrated in time to simulate the development of a Karman vortex street downstream of the island of Cheju-do. The surface layer, inversion layer, and overlying stable layer are all parametrized in the model. Very weak sinusoidal waviness but no vortex street was found in the case of the island. For a mixed layer barely deep enough to allow no part of the mountain on the island to protrude, there was more pronounced waviness but still no vortices. This result may not hold for boundary layers with poor vertical mixing. A numerical simulation of the vortex street yielded good results in comparison. The speed ratio, spacing ratio, and Strouhal number agreed rather closely with observations.

Ruscher, P. H.↗

2007 OUTBURST OF 17P/HOLMES: THE ALBEDO AND THE TEMPERATURE OF THE DUST GRAINS

Based on optical and infrared observations, we study the albedo and the temperature of the dust grains associated with the spectacular 2007 outburst of Jupiter-family comet 17P/Holmes. We found that the albedo at the solar phase angle {approx}16{sup 0} was 0.03-0.12. While the color temperature around 3-4 {mu}m was 360 {+-} 40 K, the color temperature at 12.4 {mu}m and 24.5 {mu}m was {approx}200 K, which is consistent with that of a blackbody. We studied the equilibrium temperature of the dust grains at 2.44 AU and found that the big discrepancy in the temperature was caused by the heterogeneity in particle size, that is, hotter components consist of submicron absorbing grains whereas colder components consist of large ({approx_gt}1 {mu}m) grains. The contemporaneous optical and mid-infrared observations suggest that the albedo and the temperature could decrease within {approx} 3 days after the outburst and stabilized at typical values of the other comets. We estimated the total mass injected into the coma by the outburst on the basis of the derived albedo and the optical magnitude for the entire dust cloud, and found that at least 4 x 10{sup 10} kg (equivalent to a few meter surface layer) was removed by the initial outburst event. The derived mass suggests that the outburst is explainable by neither the exogenetic asteroidal impact nor water ice sublimation driven by solar irradiation, but by an endogenic energy source. We conclude that the outburst was triggered by the energy sources several meters or more below the nuclear surface.

79 ASTRONOMY AND ASTROPHYSICS↗

Decommissioning of magnox Ltd fuel cooling pond facilities in the UK

Magnox reactors were the first generation of nuclear power stations built in the UK; ten sites in total, of which, nine had wet fuel routes with cooling ponds. Five ponds are currently in a decommissioning phase; this paper will focus primarily on Hunterston-A (HNA) Site and the central programme of work which governs its management. During its operation, the Cartridge Cooling Pond at HNA was used to receive the spent fuel discharged from the Site's two reactors, it was then stored for cooling purposes prior to dispatch off site. The current decommissioning phase focusses on draining the 6500 m{sup 3} pond. Due to the Site's limited caesium removal facilities, a stand-alone effluent treatment plant was constructed to improve abatement and reduce the pond activity from 200 to 0.7 Bq/ml (β). This was necessary due to increased environmental standards introduced since the site had ceased generation ten years previously. Early characterisation and experience from other sites concluded that if the pond were to be drained without any treatment to the walls, doses to the Operators, during subsequent decommissioning works, would routinely be in excess of 1 mSv.hr{sup -1}(γ). An opportunity was realised within the Ponds Programme that if the surface layer of the pond walls were to be removed during drain-down, ambient dose rates would be reduced by a factor of 10; this would allow for more cost-effective decommissioning options in the future. Ultrahigh pressure water jetting was tested and proved to yield a ∼95% total-activity reduction on treated surfaces. Challenges were overcome in providing safe and secure access to Decommissioning Operators to perform this operation by means of floating platforms on the surface of the pond. As strategies to clear facilities to exemption levels are becoming both cost prohibitive and not reasonably practicable, work is now underway in the Programme to determine the optimum condition for entry into long-term quiescent storage, prior to final demolition. This paper will discuss the strategy and techniques which led to Magnox Ltd ponds to be of national and international interest to the nuclear community. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preliminary evaluation of a novel polyimide adhesive for bonding titanium and reinforced composites

A novel polyimide has been developed which shows promise as an adhesive for bonding titanium-to-titanium, titanium-to-polyimide composite and composite-to-composite with excellent lap shear strengths at room temperature and moderate strengths at 288 C. The adhesive is a high molecular weight polyimide made from commercially available monomers. The use of an ether as the solvent for the polymerization and for application of the polyamic acid enhanced the adhesive properties of the polyimide. At room temperature, P13N/glass composite bonded to titanium or to itself failed primarily in the surface layer of the composite, whereas at 260 C the failure was primarily cohesive. Failure of the P13N/unidirectional HT-S graphite composite-to-titanium bonded composites occurred in the composite regardless of the test temperature. Preliminary shear results with cross-plied P13N/HT-S graphite composite-to-composite specimens showed failure in the bonded surface fibers.

Progar, D. J.↗