Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

ILC Damping Rings: Benefit of the Antechamber or: Antechamber vs. SEY

We present simulation results of the build-up of the electron-cloud density ne for the two proposed ILC damping ring lattices, DC04 and DSB3, with particular attention to the potential benefit of an antechamber. We examine a field-free region and a dipole bending magnet, with or without an antechamber. We assume a secondary electronemission model for the chamber surface based on approximate fits to measured data for TiN, except that we let the peak value of the secondary emission yield (SEY), delta max, be a variable. We conclude that there is a critical value of delta max below which the antechamber provides a substantial benefit, roughly a factor ~;;40 reduction in ne relative to the case in which max exceeds the critical value. We estimate the steady-state value of ne as a function of delta max, and thereby obtain the critical value of delta max for all cases considered. Thus, from the perspective of the electron-cloud effect, the inclusion of an antechamber in the design is justified only if delta max is below the critical value. The results presented here constitute a slight extension of those previously presented in March and September, 2010 [1, 2].

43 PARTICLE ACCELERATORS↗

Data-free inference of uncertain model parameters.

It is known that, in general, the correlation structure in the joint distribution of model parameters is critical to the uncertainty analysis of that model. Very often, however, studies in the literature only report nominal values for parameters inferred from data, along with confidence intervals for these parameters, but no details on the correlation or full joint distribution of these parameters. When neither posterior nor data are available, but only summary statistics such as nominal values and confidence intervals, a joint PDF must be chosen. Given the summary statistics it may not be reasonable nor necessary to assume the parameters are independent random variables. We demonstrate, using a Bayesian inference procedure, how to construct a posterior density for the parameters exhibiting self consistent correlations, in the absence of data, given (1) the fit-model, (2) nominal parameter values, (3) bounds on the parameters, and (4) a postulated statistical model, around the fit-model, for the missing data. Our approach ensures external Bayesian updating while marginalizing over possible data realizations. We then address the matching of given parameter bounds through the choice of hyperparameters, which are introduced in postulating the statistical model, but are not given nominal values. We discuss some possible approaches, including (1) inferring them in a separate Bayesian inference loop and (2) optimization. We also perform an empirical evaluation of the algorithm showing the posterior obtained with this data free inference compares well with the true posterior obtained from inference against the full data set.

99 GENERAL AND MISCELLANEOUS↗

A variable high-order shock-capturing finite difference method with GP-WENO

Here, we present a new finite difference shock-capturing scheme for hyperbolic equations on static uniform grids. The method provides selectable high-order accuracy by employing a kernel-based Gaussian Process (GP) data prediction method which is an extension of the GP high-order method originally introduced in a finite volume framework by the same authors. The method interpolates Riemann states to high order, replacing the conventional polynomial interpolations with polynomial-free GP-based interpolations. For shocks and discontinuities, this GP interpolation scheme uses a nonlinear shock handling strategy similar to Weighted Essentially Non-Oscillatory (WENO), with a novelty consisting in the fact that nonlinear smoothness indicators are formulated in terms of the Gaussian likelihood of the local stencil data, replacing the conventional L 2 -type smoothness indicators of the original WENO method. We demonstrate that these GP-based smoothness indicators play a key role in the new algorithm, providing significant improvements in delivering high – and selectable – order accuracy in smooth flows, while successfully delivering non-oscillatory solution behavior in discontinuous flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

S-process krypton of variable isotopic composition in the Murchison meteorite

Data are reported which, for the first time, permit the derivation of the full isotopic spectrum of s-process krypton with reasonable precision. It is shown that this s-Kr in a residue from the Murchison meteorite did not originate in one single s-process but rather is a mixture of contributions from stellar environments where the density of free neutrons was not the same. The astrophysical conditions under which this krypton was produced were distinct from those that have been invoked to explain the solar system s-process abundance. Similar to the C-13-rich carbon component in an aliquot of the same residue, the s-process Kr from different astrophysical sites has retained its identity during the accumulation and subsequent history of the meteorite.

Ott, Urlich↗

Fresh-slice multicolour X-ray free-electron lasers

X-ray free-electron lasers (XFELs) provide femtosecond X-ray pulses with a narrow energy bandwidth and unprecedented brightness. Ultrafast physical and chemical dynamics, initiated with a site-specific X-ray pulse, can be explored using XFELs with a second ultrashort X-ray probe pulse. However, existing double-pulse schemes are complicated, difficult to customize or provide only low-intensity pulses. Here we present the novel fresh-slice technique for multicolour pulse production, wherein different temporal slices of an electron bunch lase to saturation in separate undulator sections. This method combines electron bunch tailoring from a passive wakefield device with trajectory control to provide multicolour pulses. The fresh-slice scheme outperforms existing techniques at soft X-ray wavelengths. It produces femtosecond pulses with a power of tens of gigawatts and flexible colour separation. The pulse delay can be varied from temporal overlap to almost one picosecond. As a result, we also demonstrate the first three-colour XFEL and variably polarized two-colour pulses.

43 PARTICLE ACCELERATORS↗

Unilateral Prostate Cancer Cannot be Accurately Predicted in Low-Risk Patients

Purpose: Hemiablative therapy (HAT) is increasing in popularity for treatment of patients with low-risk prostate cancer (PCa). The validity of this therapeutic modality, which exclusively treats PCa within a single prostate lobe, rests on accurate staging. We tested the accuracy of unilaterally unremarkable biopsy findings in cases of low-risk PCa patients who are potential candidates for HAT. Methods and Materials: The study population consisted of 243 men with clinical stage {<=}T2a, a prostate-specific antigen (PSA) concentration of <10 ng/ml, a biopsy-proven Gleason sum of {<=}6, and a maximum of 2 ipsilateral positive biopsy results out of 10 or more cores. All men underwent a radical prostatectomy, and pathology stage was used as the gold standard. Univariable and multivariable logistic regression models were tested for significant predictors of unilateral, organ-confined PCa. These predictors consisted of PSA, %fPSA (defined as the quotient of free [uncomplexed] PSA divided by the total PSA), clinical stage (T2a vs. T1c), gland volume, and number of positive biopsy cores (2 vs. 1). Results: Despite unilateral stage at biopsy, bilateral or even non-organ-confined PCa was reported in 64% of all patients. In multivariable analyses, no variable could clearly and independently predict the presence of unilateral PCa. This was reflected in an overall accuracy of 58% (95% confidence interval, 50.6-65.8%). Conclusions: Two-thirds of patients with unilateral low-risk PCa, confirmed by clinical stage and biopsy findings, have bilateral or non-organ-confined PCa at radical prostatectomy. This alarming finding questions the safety and validity of HAT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Techno-economic and environmental assessment of solar-based electrical vehicles charging stations integrated with hydrogen production

With the growing interest in adopting both commercial and residential electric vehicles (EVs) utilizing green renewable energy, the techno-economic assessment of EV charging stations with solar energy is a critical aspect of the transition to sustainable transportation. However, battery storage capacity for variable solar energy production is becoming increasingly less cost-effective due to the higher Lithium price. Complementing solar energy production and battery storage, the potential of combining green hydrogen fuel energy integration with solar energy for EV charging stations can provide a sustainable alternative to reach carbon-free transportation. This research aims to assess the technical and economic viability of grid-connected Photovoltaic (PV)-based EV charging stations across Kentucky based on existing EV load profiles. The study considers different PV system sizes, locations, orientations, and the impact of net metering policies and electricity tariffs on the profitability of the PV systems. Further, using excess PV energy, Lithium-Ion batteries will be charged, which will be assessed considering the techno-economic and environmental impacts of green EV charging stations. To further enhance green renewable energy production, we also investigated the feasibility of on-grid PV-based EV charging stations with Lithium-Ion batteries charged during low tariff periods. In comparison with these scenarios, we studied the potential benefits of integrating green hydrogen energy production using excess solar energy with and without governmental incentives. Furthermore, we assess the environmental impact of these green EV charging stations across Kentucky. Our study indicates that EV stations across Kentucky have similar techno-economic feasibility with insignificant deviation in the levelized cost of electricity, payback period, and PV energy fraction with/without Li-Ion batteries. However, with green hydrogen production, the marginal H 2 production cost indicates the first scenario (on-grid PV energy charging) is the most significant, roughly 10 USD/Kg, which is similar to 1.5 times higher than the second (charging during low-tariff periods) and the third scenarios (power grid to satisfy the demand deficit - approximately 6.5 USD/Kg). From the environmental perspective, the second scenario would be a good option for either hybrid EV/H 2 or EV charging stations in Kentucky, factoring in the hydrogen production cost and the carbon footprint.

08 HYDROGEN↗

Amine Dynamics in Diamine-Appended Mg 2 (dobpdc) Metal–Organic Frameworks

In this work, variable-temperature 15 N solid-state NMR spectroscopy is used to uncover the dynamics of three diamines appended to the metal–organic framework Mg 2 (dobpdc) (dobpdc 4– = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), an important family of CO 2 capture materials. The results imply both bound and free amine nitrogen environments exist when diamines are coordinated to the framework open Mg 2+ sites. There are rapid exchanges between two nitrogen environments for all three diamines, the rates and energetics of which are quantified by 15 N solid-state NMR data and corroborated by density functional theory calculations and molecular dynamics simulations. The activation energy for the exchange provides a measure of the metal–amine bond strength. The unexpected negative correlation between the metal–amine bond strength and CO 2 adsorption step pressure reveals that metal–amine bond strength is not the only important factor in determining the CO 2 adsorption properties of diamine-appended Mg 2 (dobpdc) metal–organic frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge Transfer Plasmonics in Bespoke Graphene/α-RuCl 3 Cavities

Surface plasmon polaritons (SPPs) provide a window into the nano-optical, electrodynamic response of their host material and its dielectric environment. Graphene/α-RuCl 3 serves as an ideal model system for imaging SPPs since the large work function difference between these two layers facilitates charge transfer that hole dopes graphene with n ~ 10 13 cm –2 free carriers. In this work, we study the emergent THz response of graphene/α-RuCl 3 heterostructures using our home-built cryogenic scanning near-field optical microscope. Using phase-resolved imaging, we clearly observe long wavelength, heavily damped THz SPPs in a series of variable-size graphene cavities. From this, we extract the plasmonic wavelength and scattering rate in the graphene/α-RuCl 3 heterostructures. We determine that the measured plasmon wavelength and electronic scattering rate match our heterostructures’ theoretically predicted values. Here, our results demonstrate that shaping graphene into bespoke cavity structures enables observation and quantification of SPPs in heavily doped graphene that are largely not addressable with other experimental techniques. Moreover, the manifest lack of metallicity observed in the adjacent doped α-RuCl 3 layer provides significant constraints on the nature of the interfacial charge transfer in this 2D heterostructure.

36 MATERIALS SCIENCE↗

Continuum radiated power density $(P^{\textrm{C}}_{\textrm{rad}})$ and effective charge $(Z_{\textrm{eff}})$ estimates from multi-energy photon-counting measurements

Multi-energy soft x-ray pinhole cameras have been designed, built, calibrated, and operated at Madison symmetric Torus, Alcator C-Mod, and more recently at Tokamak a configuration variable and Tungsten Environment in Steady-State Tokamak (WEST), to measure plasma emission across multiple energy ranges. Here we describe a new methodology to estimate the local continuum radiated power density and the plasma effective charge (Z eff ) directly from photon-counting measurements of the line-free continuum emission (Bremsstrahlung and Radiative Recombination) in several energy bands between 11 and 18 keV. This capability is particularly valuable for confinement systems using metal plasma-facing components, where x-ray losses from interactions with the sputtered wall can represent a significant fraction of the total radiated power (P rad ). The approach leverages a well-characterized detector responsivity, modeled by a complementary error function, and interprets the differential multi-energy measurements between adjacent energy levels through the probability density function of a Gaussian distribution. The implementation of this diagnostic technique is currently under development on the WEST tokamak, aiming at the goal of providing real-time P rad and Z eff measurements during long-pulse operation (up to 1000 s) in the 2026 campaign.

WEST↗

Materials science in the time domain using Bragg coherent diffraction imaging

Materials are generally classified by a phase diagram which displays their properties as a function of external state variables, typically temperature and pressure. A new dimension that is relatively unexplored is time: a rich variety of new materials can become accessible in the transient period following laser excitation from the ground state. The timescale of nanoseconds to femtoseconds, is ripe for investigation using x-ray free-electron laser (XFEL) methods. There is no shortage of materials suitable for time-resolved materials-science exploration. Oxides alone represent most of the minerals making up the Earth's crust, catalysts, ferroelectrics, corrosion products and electronically ordered materials such as superconductors, to name a few. Some of the elements have metastable phase diagrams with predicted new phases. There are some examples known already: an oxide 'hidden phase' living only nanoseconds and an electronically ordered excited phase of fullerene C 60 , lasting only femtoseconds. In a completely general way, optically excited states of materials can be probed with Bragg coherent diffraction imaging, both below the damage threshold and in the destructive regime. Lastly, prospective methods for carrying out such XFEL experiments are discussed.

36 MATERIALS SCIENCE↗

LBNL Fault Detection and Diagnostics Datasets

These datasets can be used to evaluate and benchmark the performance accuracy of Fault Detection and Diagnostics (FDD) algorithms or tools. It contains operational data from simulation, laboratory experiments, and field measurements from real buildings for seven HVAC systems/equipment (rooftop unit, single-duct air handler unit, dual-duct air handler unit, variable air volume box, fan coil unit, chiller plant, and boiler plant). Each dataset includes a .pdf file to document key information necessary to understand the content and scope, multiple csv files containing all the time-series data for faults at different severity levels and one fault-free case, and a ttl file to visualize the data according to BRICK schema. The dataset was created by LBNL, PNNL, NREL, ORNL and Drexel University.

AC↗

Cold Climate Field Study of the Effect of Defrost Controls on the Integrated Performance of a Ductless Air-Source Heat Pump

Residential heat pumps have advanced over the past decade to allow for operation at colder temperatures. However, the challenges of frost accumulation and defrosting the outdoor coil remain. The goal of this study was to evaluate the impact of the control algorithms that determine when a heat pump needs to defrost and when the base pan heater runs on the overall heating efficiency of the heat pump. In this study, which occurred during the 2023–2024 heating season, we measured the performance of a ductless air-source heat pump installed in Fairbanks, Alaska, USA. The heat pump was instrumented to measure the electrical input and the thermal output, as well as selected internal variables and indoor and outdoor environmental conditions. The heat pump was first operated with factory default control algorithms associated with the initiation of defrost and control of the base pan heater. These factory default algorithms focused on aggressively defrosting the outdoor coil and keeping the base pan ice-free. In the middle of the winter, these algorithms were changed to focus on reducing defrost cycles and increasing efficiency, while the heat pump continued to be operated and monitored. The results showed that significant increases in efficiency are possible by improving the defrost and base pan heater control algorithms.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Regionally refined test bed in E3SM atmosphere model version 1 (EAMv1) and applications for high-resolution modelling

Climate simulation with more accurate process-level representation at finer resolutions is a pressing necessity in order to provide actionable information to policy-makers regarding extreme events in a changing climate. Computational limitation is a major obstacle for building, and running high-resolution (HR, here 0.25° average grid spacing at the equator) models (HRM). A more affordable path to HRM is to use a global regionally refined model (RRM), which only simulates a portion of the globe at HR while the remaining is at low-resolution (LR, 1°). In this study, we compare the Energy Exascale Earth System Model (E3SM) atmosphere model version 1 (EAMv1) RRM with the HR mesh over the contiguous United States (CONUS) to its corresponding globally uniform LR and HR configurations, as well as to observations and reanalysis data. The RRM has a significantly reduced computational cost (roughly proportional to the HR mesh size) relative to the globally uniform HRM. Over the CONUS, we evaluate the simulation of important dynamical and physical quantities as well as various precipitation measures. Differences between the RRM and HRM over the HR region are predominantly small, demonstrating that the RRM reproduces both well- and poorly simulated behaviours of the HRM over the CONUS. Further analysis based on RRM simulations with the LR vs. HR model parameters reveals that RRM performance is greatly influenced by the different parameter choices used in the LR and HR EAMv1. This is a result of the poor scale-aware behaviour of physical parameterizations, especially for variables influencing sub-grid scale physical processes. RRM can serve as a useful framework to test physics schemes across a range of scales, leading to improved consistency in future E3SM versions. Applying nudging-to-observations techniques within the RRM framework also demonstrates significant advantages over a free-running configuration for use as a testbed, and as such represents an efficient and more robust physics testbed capability. Our conclusions provide additional confirmatory evidence that the RRM is an efficient and effective approach for HRM development and hydrologic research.

54 ENVIRONMENTAL SCIENCES↗

Artificial thickening of transonic boundary layers

A wind-tunnel experiment was performed to examine the effect of turbulence enhancers on the growth of a flat-plate turbulent boundary layer. The free-stream Mach number was varied from 0.6 to 0.9 with unit Reynolds numbers of 6.56 million/m and 13.12 million/m. Several configurations of high-drag objects were mounted near the leading edge of a long flat plate to introduce momentum losses. Measurements of both mean and time-variable flow parameters were made at downstream locations to quantify the influence of the turbulence enhancers. A configuration consisting of two rows of alternately spaced, vertical, 0.317-cm-diameter cylinders of 16 and 12 diameters length produced 1/9to 1/7-power velocity profiles. Unsteady total-temperature and static-pressure profiles were found to be similar to natural turbulent boundary-layer profiles. The techniques presented can be useful whenever thick turbulent boundary layers are required, but the natural growth of the layer is limited by the test facility.

Otten, L. J.↗

A model of the polarization position-angle swings in BL Lacertae objects

The polarization position-angle swings that have been measured in a number of BL Lacertae objects and highly variable quasars are interpreted in terms of shock waves which illuminate (by enhanced synchrotron radiation) successive transverse cross sections of a magnetized, relativistic jet. The jet is assumed to have a nonaxisymmetric magnetic field configuration of the type discussed in the companion paper on the equilibria of force-free jets. For a jet that is viewed at a small angle to the axis, the passage of a shock will give rise to an apparent rotation of the polarization position angle whose amplitude can be substantially larger than 180 deg. The effects of freely propagating shocks are compared with those of bow shocks which form in front of dense obstacles in the jet, and specific applications to 0727 - 115 and BL Lacertae are considered. In the case of 0727 - 115, it is pointed out that the nonuniformity of the swing rate and the apparent oscillations of the degree of polarization could be a consequence of relativistic aberration.

Konigl, A.↗

Numerical experiments on boundary-layer receptivity

The incompressible laminar flow over an infinitely thin flat plate is obtained using a Navier-Stokes code in vorticity-velocity variables. The flow at and near the leading edge of the plate is an integral part of the solution algorithm which requires no special treatment; thus allowing for the flow field in this region to be studied in detail. An incident plane sound wave is imposed in the free-stream flow and the receptivity of the boundary layer is studied with particular emphasis to the flow near and at the leading edge.

Gatski, Thomas B.↗

Effect of variable-position inlet guide vanes and interstage bleed on compressor performance of a high-pressure-ratio turbojet engine

Increased guide-vane turning resulted in poorer overall performance, the decrease being greatest at the highest rotor speed. Rotating stall originating at the tips of the first stage correlated with the knee in the stall-limit line. Increasing guide-vane turning shifted the first-stage stall-free performance and the knee in the stall-limit line to a lower engine speed. Opening the interstage bleed reduced the minimum rotor speed at which stall-free performance of the first stage was possible and tended to eliminate the knee in the stall-limit line.

Huntley, S C↗