Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTAMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Ion mobility spectrometry and the omics: Distinguishing isomers, molecular classes and contaminant ions in complex samples

Ion mobility spectrometry (IMS) is a widely used analytical technique providing rapid gas phase separations. IMS alone is useful, but its coupling with mass spectrometry (IMS-MS) and various front-end separation techniques has greatly increased the molecular information achievable from omic analyses, including the sensitivity and peak capacity extracted from complex biological and environmental sample analyses. Due to these characteristics, IMS-MS is rapidly gaining attention for improving metabolomic, lipidomic, glycomic, proteomic and exposomic analyses. Numerous studies including national security-related analyses, disease screenings and environmental evaluations are illustrating that IMS-MS is able to extract information not possible with MS alone. Furthermore, IMS-MS has shown great utility in salvaging molecular information for low abundance molecules of interest when high concentration contaminant ions are present in the sample. This review highlights how IMS-MS is currently being used in omic analyses to distinguish structurally similar molecules, isomers, molecular classes and contaminant ions.

Ion mobility spectrometry,, Mass Spectometry, Omic↗

Palladized cells as suspension catalyst and electrochemical catalyst for reductively degrading aromatics contaminants: Roles of Pd size and distribution

The palladized cell (Pd-cell) could be used as an efficient catalyst in catalyzing the degradations of a wide variety of environmental contaminants. Nevertheless, when the Pd NPs associate with the bacteria, the catalytic activity likely significantly affected by the biomass. Quantitative indicators that characterize of Pd-cell are necessary and little attention has been paid to investigate how the catalytic efficiency of Pd-cell is affected by the size and distribution of Pd NPs. To fill this gap, we explored the roles of the above-mentioned key factors on the performance of Pd-cell in catalyzing the degradations of two aromatic contaminants (nitrobenzene and p-chlorophenol) in two commonly used scenarios: (1) using Pd-cell as suspended catalyst in solution and (2) using Pd-cell as electrocatalyst directly coated on electrode. In scenario (1), the relationship of exposing area to Pd particle size and distribution factors was established. Based on theoretical estimation and catalytic performance analysis, the results indicated that adjusting the exposing area to a large value (9.3 ± 0.1 × 10 5 nm 2 mg -1 Pd) was extremely effective for improving the catalytic activity of Pd-cell used as a suspension catalyst. In scenario (2), our results showed that the best electrocatalytic performances were achieved on the electrode decorated with Pd-cells with the largest NP size (54.3 ± 16.4 nm), which exerted maximum electrochemical active surface area (10.6 m 2 g -1 ) as well as favorable conductivity. The coverage of deposited Pd NPs (>95%) on the cell surface played a crucial role in boosting the conductivity of biocatalyst, thus determining the possibility of Pd-cell as an efficient electrocatalyst. The findings of this study provide a guidance for the synthesis and application of Pd-cell, which enables the design of Pd-cell to be suitable for different catalysis systems with high catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled Geochemical Impacts of Leaking CO2 and Contaminants from Subsurface Storage Reservoirs on Groundwater Quality

The leakage of CO2 and the concomitant saline solutions from deep storage reservoirs to overlying groundwater aquifers is considered one of the major potential risks associated with geologic CO2 sequestration (GCS). Batch and column experiments were conducted to determine the fate of trace metals in groundwater in the scenarios of CO2 and metal contaminated brine leakage. The sediments used in this work were collected from an unconsolidated sand and gravel aquifer in Kansas, and contained 0-4 wt% carbonates. Cd and As were spiked into the reaction system to represent potential contaminants from the reservoir brine that could intrude into groundwater aquifers with leaking CO2 at initial concentrations of 114 and 40 ppb, respectively. Through this research we demonstrated that Cd and As were adsorbed on the sediments, in spite of the lowered pH due to CO2 dissolution in the groundwater. Cd concentrations were well below its MCL in both batch and column studies, even for sediment samples without detectable carbonate to buffer the pH. Arsenic concentrations in the effluent were also significantly lower than influent concentration, suggesting that the sediments tested have the capacity to mitigate the coupled adverse effects of CO2 leakage and brine intrusion. However, the mitigation capacity of sediment is a function of its geochemical properties [e.g., the calcite content; the presence of adsorbed As(III); and the presence of P in the natural sediment]. The competitive adsorption between phosphate and arsenate may result in higher concentrations of As in the aqueous phase.

geological CO2 sequestration, groundwater quality,↗

Suspect and Nontarget Screening for Contaminants of Emerging Concern in an Urban Estuary

This study used suspect and nontarget screening with high-resolution mass spectrometry to characterize the occurrence of contaminants of emerging concern (CECs) in the nearshore marine environment of Puget Sound (WA). In total, 87 non-polymeric CECs were identified; those confirmed with reference standards (45) included pharmaceuticals, herbicides, vehicle-related compounds, plasticizers, and flame retardants. Eight polyfluoroalkyl substances were detected; perfluorooctanesulfonic acid (PFOS) concentrations were as high as 72-140 ng/L at one location. Low levels of methamphetamine were detected in 41% of the samples. Transformation products of pesticides were tentatively identified, including two novel transformation products of tebuthiuron. While a hydrodynamic simulation, analytical results, and dilution calculations demonstrated the prevalence of wastewater effluent to nearshore marine environments, the identity and abundance of selected CECs revealed the additional contributions from stormwater and localized urban and industrial sources. For the confirmed CECs, risk quotients were calculated based on concentrations and predicted toxicities, and eight CECs had risk quotients >1. Dilution in the marine estuarine environment lowered the risks of most wastewater-derived CECs, but dilution alone is insufficient to mitigate risks of localized inputs. These findings highlighted the necessity of suspect and nontarget screening and revealed the importance of localized contamination sources in urban marine environments.

Tian, Zhenyu↗

Water Adsorption and Dissociation on Polycrystalline Copper Oxides: Effects of Environmental Contamination and Experimental Protocol

We use ambient-pressure X-ray photoelectron spectroscopy (APXPS) to study chemical changes, including hydroxylation and water adsorption, at copper oxide surfaces from ultrahigh vacuum to ambient relative humidities of ~5%. Polycrystalline CuO and Cu 2 O surfaces were prepared by selective oxidation of metallic copper foils. For both oxides, hydroxylation occurs readily, even at high-vacuum conditions. Hydroxylation on both oxides plateaus near ~0.01% relative humidity (RH) at a coverage of ~1 monolayer. In contrast to previous studies, neither oxide shows significant accumulation of molecular water; rather, both surfaces show a high affinity for adventitious carbon contaminants. Results of isobaric and isothermic experiments are compared, and the strengths and potential drawbacks of each method are discussed. We also provide critical evaluations of the effects of the hot filament of the ion pressure gauge on the reactivity of gas-phase species, the peak fitting procedure on the quantitative analysis of spectra, and rigorous accounting of carbon contamination on data analysis and interpretation. Lastly, this work underscores the importance of considering experimental design and data analysis protocols during APXPS experiments with water vapor in order to minimize misinterpretations arising from these factors.

36 MATERIALS SCIENCE↗

High Tolerance to Iron Contamination in Lead Halide Perovskite Solar Cells

The relationship between charge-carrier lifetime and the tolerance of lead halide perovskite (LHP) solar cells to intrinsic point defects has drawn much attention by helping to explain rapid improvements in device efficiencies. However, little is known about how charge-carrier lifetime and solar cell performance in LHPs are affected by extrinsic defects (i.e., impurities), including those that are common in manufacturing environments and known to introduce deep levels in other semiconductors. Here, we evaluate the tolerance of LHP solar cells to iron introduced via intentional contamination of the feedstock and examine the root causes of the resulting efficiency losses. We find that comparable efficiency losses occur in LHPs at feedstock iron concentrations approximately 100 times higher than those in p-type silicon devices. Photoluminescence measurements correlate iron concentration with nonradiative recombination, which we attribute to the presence of deep-level iron interstitials, as calculated from first-principles, as well as iron-rich particles detected by synchrotron-based X-ray fluorescence microscopy. At moderate contamination levels, we witness prominent recovery of device efficiencies to near-baseline values after biasing at 1.4 V for 60 s in the dark. We theorize that this temporary effect arises from improved charge-carrier collection enhanced by electric fields strengthened from ion migration toward interfaces. Lastly, our results demonstrate that extrinsic defect tolerance contributes to high efficiencies in LHP solar cells, which inspires further investigation into potential large-scale manufacturing cost savings as well as the degree of overlap between intrinsic and extrinsic defect tolerance in LHPs and 'perovskite-inspired' lead-free stable alternatives.

14 SOLAR ENERGY↗

Plastic-Syringe Induced Silicone Contamination in Organic Photvoltaic Fabrication: Implications for Small-Volume Additives

Herein, the implications of silicone contamination found in solution-processed conjugated polymer solar cells are explored. Similar to a previous work based on molecular cells, we find this contamination as a result of the use of plastic syringes during fabrication. However, in contrast to the molecular case, we find that glass-syringe fabricated devices give superior performance than plastic-syringe fabricated devices in poly(3-hexylthiophene)-based cells. We find that the unintentional silicone addition alters the solution’s wettability, which translates to a thinner, less absorbent film on spinning. With many groups studying the effects of small-volume additives, this work should be closely considered as many of these additives may also directly alter the solutions’ wettability, or the amount of silicone dissolved off the plastic syringes, or both. Thereby, film thickness, which generally is not reported in detail, can vary significantly from device to device.

36 MATERIALS SCIENCE↗

Microbial community structure and biodegradation activity of particle-associated bacteria in a coal tar contaminated creek

The Chattanooga Creek Superfund site (Chattanooga, TN) is one of the most polluted waterways in the southeastern U.S. with high polycyclic aromatic hydrocarbon (PAH) concentrations in the sediments. PAHs associate with suspended solids in the water column, and may be redeposited onto the floodplain. These suspended particles represent an interesting but understudied environment for PAH-degrading microbial communities. This study tested the hypotheses that particle-associated bacterial (PAB) communities have genotypic potential (PAH-dioxygenase genes) and activity (naphthalene and pyrene mineralization), and can contribute to natural attenuation of PAHs in Chattanooga Creek. Upstream of the Superfund site, mineralization ranged from 0.2 to 2.0% of added {sup 14}C-naphthalene and 0 to 0.1% {sup 14}C-pyrene (after 40 h), with first order biodegradation rate constants (k{sub 1}) ranging from 1.09 to 9.18 x 10{sup -5} h{sup -1} and 0 to 1.13 x 10{sup -6} h{sup -1}, respectively. Mineralization was significantly greater in PAB communities within the contaminated zone, with 11.8 to 31.2% {sup 14}C-naphthalene (k{sup 1} 5.34 to 14.2 x 10-4 h{sup -1}) and 1.3 to 6.6% {sup 14}C-pyrene mineralized (k{sub 1} 2.89 to 15.0 x 10{sup -5} h{sup -1}). Abundances of nagAc (naphthalene dioxygenase) and nidA (pyrene dioxygenase) genes indicated that PAB communities harbored populations with genetic potential for both low- and high-molecular weight PAH degradation, and quantification of Mycobacterium 16S rDNA genes indicated that PAH-degrading mycobacteria are also prevalent in this environment. Phylogenetic comparisons (T-RFLPs) between PAB and sediments indicated these microbial communities were taxonomically distinct, but shared some functional similarities, namely PAH catabolic genotypes, mineralization capabilities, and community structuring along a contamination gradient. 38 refs., 4 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Sequestering Uranium and Technetium through Co-precipitation with Aluminum in a Contaminated Acidic Environment

This research evaluated a method of controlled base addition for immobilizing uranium (U) and technetium (Tc) through the co-precipitation with aluminum (Al) and other metal ions which co-exist in a highly contaminated acidic environment. The batch and column experiments indicate that the addition of strong base (NaOH) provided a rapid yet effective means of sequestering U, Tc, and toxic metal ions such as nickel (Ni2+) and cobalt (Co2+) in the sediment and groundwater. Greater than 94% of soluble U (as UO22+) and >83% of Tc (as TcO4-) can be immobilized at pH above 4.5 by the co-precipitation with Al-oxyhydroxides. The presence of sediment minerals appeared to facilitate the co-precipitation of these contaminants at lower pH values than those in the absence of sediments. The immobilized U and Tc were found to be stable against dissolution in Ca(NO3)2 solution (up to 50 mM) because of the formation of strong surface complexes between U or Tc and Al-oxyhydroxides. This research concludes that, as long as a relatively high pH (>5) and a low carbonate concentration are maintained, both U and Tc can be effectively immobilized under given site-specific conditions.

54 ENVIRONMENTAL SCIENCES↗

Inhibition Effect of Secondary Phosphate Mineral Precipitation on Uranium Release from Contaminated Sediments

The inhibitory effect of phosphate mineral precipitation on uranium release was evaluated using a U(VI)-contaminated sediment collected from the US Department of Energy (DOE) Hanford site. The sediment contained U(VI) that was associated with diffusion-limited intragrain regions within its mm-size granitic lithic fragments. The sediment was first treated to promote phosphate mineral precipitation in batch suspensions spiked with 1 and 50 mM aqueous phosphate, and calcium in a stoichiometric ratio of mineral hydroxyapatite. The phosphate-treated sediment was then leached to solubilize contaminant U(VI) in a column system using a synthetic groundwater that contained chemical components representative of Hanford groundwater. Phosphate treatment significantly decreased the extent of U(VI) release from the sediment. Within the experimental duration of about 200 pore volumes, the effluent U(VI) concentrations were consistently lower by over one and two orders of magnitude after the sediment was treated with 1 and 50 mM of phosphate, respectively. Measurements of solid phase U(VI) using various spectroscopes and chemical extraction of the sediment collectively indicated that the inhibition of U(VI) release from the sediment was caused by: 1) U(VI) adsorption to the secondary phosphate precipitates and 2) the transformation of initially present U(VI) mineral phases to less soluble forms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enrichment of specific protozoan populations during in situ bioremediation of uranium-contaminated groundwater

The importance of bacteria in the anaerobic bioremediation of groundwater polluted with organic and/or metal contaminants is well-recognized and in some instances so well understood that modeling of the in situ metabolic activity of the relevant subsurface microorganisms in response to changes in subsurface geochemistry is feasible. However, a potentially significant factor influencing bacterial growth and activity in the subsurface that has not been adequately addressed is protozoan predation of the microorganisms responsible for bioremediation. In field experiments at a uranium-contaminated aquifer located in Rifle, CO, acetate amendments initially promoted the growth of metal-reducing Geobacter species followed by the growth of sulfate-reducers, as previously observed. Analysis of 18S rRNA gene sequences revealed a broad diversity of sequences closely related to known bacteriovorous protozoa in the groundwater prior to the addition of acetate. The bloom of Geobacter species was accompanied by a specific enrichment of sequences most closely related to the amoeboid flagellate, Breviata anathema, which at their peak accounted for over 80% of the sequences recovered. The abundance of Geobacter species declined following the rapid emergence of B. anathema. The subsequent growth of sulfate-reducing Peptococcaceae was accompanied by another specific enrichment of protozoa, but with sequences most similar to diplomonadid flagellates from the family Hexamitidae, which accounted for up to 100% of the sequences recovered during this phase of the bioremediation. These results suggest a prey-predator response with specific protozoa responding to increased availability of preferred prey bacteria. Thus, quantifying the influence of protozoan predation on the growth, activity, and composition of the subsurface bacterial community is essential for predictive modeling of in situ uranium bioremediation strategies.

breviata↗

Remediation of heavy metal contaminated soil by asymmetrical alternating current electrochemistry

Soil contamination by heavy metals constitutes an important environmental problem, whereas field applicability of existing remediation technologies has encountered numerous obstacles, such as long operation time, high chemical cost, large energy consumption, secondary pollution, and soil degradation. Here we report the design and demonstration of a remediation method based on a concept of asymmetrical alternating current electrochemistry that achieves high degrees of contaminant removal for different heavy metals (copper, lead, cadmium) at different initial concentrations (from 100 to 10,000 ppm), all reaching corresponding regulation levels for residential scenario after rational treatment time (from 30 min to 6 h). No excessive nutrient loss in treated soil is observed and no secondary toxic product is produced. Long-term experiment and plant assay show the high sustainability of the method and its feasibility for agricultural use.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Targeted detection of Dehalococcoides mccartyi microbial protein biomarkers as indicators of reductive dechlorination activity in contaminated groundwater

Dehalococcoides mccartyi ( Dhc ) bacterial strains expressing active reductive dehalogenase (RDase) enzymes play key roles in the transformation and detoxification of chlorinated pollutants, including chlorinated ethenes. Site monitoring regimes traditionally rely on qPCR to assess the presence of Dhc biomarker genes; however, this technique alone cannot directly inform about dechlorination activity. To supplement gene-centric approaches and provide a more reliable proxy for dechlorination activity, we sought to demonstrate a targeted proteomics approach that can characterize Dhc mediated dechlorination in groundwater contaminated with chlorinated ethenes. Targeted peptide selection was conducted in axenic cultures of Dhc strains 195, FL2, and BAV1. These experiments yielded 37 peptides from housekeeping and structural proteins (i.e., GroEL, EF-TU, rpL7/L2 and the S-layer), as well as proteins involved in the reductive dechlorination activity (i.e., FdhA, TceA, and BvcA). The application of targeted proteomics to a defined bacterial consortium and contaminated groundwater samples resulted in the detection of FdhA peptides, which revealed active dechlorination with Dhc strain-level resolution, and the detection of RDases peptides indicating specific reductive dechlorination steps. The results presented here show that targeted proteomics can be applied to groundwater samples and provide protein level information about Dhc dechlorination activity.

59 BASIC BIOLOGICAL SCIENCES↗

Sources, seasonal cycling, and fate of plutonium in a seasonally stratified and radiologically contaminated pond

Unlike short-term laboratory experiments, studies at sites historically contaminated with radionuclides can provide insight into contaminant migration behavior at environmentally-relevant decadal timescales. One such site is Pond B, a seasonally stratified reservoir within Savannah River Site (SC, USA) has low levels (μBq L –1 ) of plutonium in the water column. Here, we evaluate the origin of plutonium using high-precision isotope measurements, investigate the impact of water column geochemistry on plutonium cycling during different stratification periods, and re-evaluate long-term mass balance of plutonium in the pond. New isotopic data confirm that reactor-derived plutonium overwhelms input from Northern Hemisphere fallout at this site. Two suggested mechanisms for observed plutonium cycling in the water column include: (1) reductive dissolution of sediment-derived Fe(III)-(oxyhydr)oxides during seasonal stratification and (2) plutonium stabilization complexed strongly to Fe(III)-particulate organic matter (POM) complexes. While plutonium may be mobilized to a limited extent by stratification and reductive dissolution, peak plutonium concentrations are in shallow waters and associated with Fe(III)-POM at the inception of stratification. This suggests that plutonium release from sediments during stratification is not the dominant mechanism driving plutonium cycling in the pond. Importantly, our analysis suggests that the majority is retained in shallow sediments and may become increasingly recalcitrant.

54 ENVIRONMENTAL SCIENCES↗

Sulfate radical oxidation of aromatic contaminants: a detailed assessment of density functional theory and high-level quantum chemical methods

We present that advanced oxidation processes that utilize highly oxidative radicals are widely used in water reuse treatment. In recent years, the application of sulfate radical (SO 4 ˙ - ) as a promising oxidant for water treatment has gained increasing attention. To understand the efficiency of SO 4 ˙ - in the degradation of organic contaminants in wastewater effluent, it is important to be able to predict the reaction kinetics of various SO 4 ˙ - -driven oxidation reactions. In this study, we utilize density functional theory (DFT) and high-level wavefunction-based methods (including computationally-intensive coupled cluster methods), to explore the activation energies of SO 4 ˙ - -driven oxidation reactions on a series of benzene-derived contaminants. Additionally, these high-level calculations encompass a wide set of reactions including 110 forward/reverse reactions and 5 different computational methods in total. Based on the high-level coupled-cluster quantum calculations, we find that the popular M06-2X DFT functional is significantly more accurate for OH - additions than for SO 4 ˙ - reactions. Most importantly, we highlight some of the limitations and deficiencies of other computational methods, and we recommend the use of high-level quantum calculations to spot-check environmental chemistry reactions that may lie outside the training set of the M06-2X functional, particularly for water oxidation reactions that involve SO 4 ˙ - and other inorganic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facet-Dependent Contaminant Removal Properties of Hematite Nanocrystals and Their Environmental Implications

Hematite nanocrystals are ubiquitous in natural environments, and because of their strong sorption properties these particles can influence the mobility and fate of toxic elements such as hexavalent chromium and arsenic. It is now well established that sorption onto hematite is morphology dependent, because its hexagonal structure imparts distinct interfacial chemistry to individual facets. It is also well known that interaction of these facets with ferrous iron can impart powerful catalytic reduction capacity at these interfaces. However, the underlying mechanisms for facet-specific sorption and reductive transformation of specific metals remains poorly understood at the molecular scale. In this article, we first briefly review the synthesis of size and morphologically well-defined hematite nanocrystals and their corresponding growth mechanisms. We then summarize recent advances in understanding interactions between hematite facets and ferrous iron, as well as their impact on the geochemical cycling of redox-active elements and contaminants. We emphasize the reductive dissolution of hematite facets and elucidate corresponding environmental implications. Furthermore, we focus on facet-dependent adsorption of model environmental contaminants. Finally, we highlight the importance of hematite nanocrystals for remediation and provide suggestions for improving understanding of their roles in the environment.

Huang, Xiaopeng↗

Dipolar vortex formation in electromagnetic ion-temperature-gradient driven waves in a dust-contaminated magnetoplasma

We investigated linear and nonlinear properties of electromagnetic ion-temperature-gradient driven mode for a dissipative, nonuniform dust-contaminated electron-ion plasma with sheared ion flows. In the linear limit, a new dispersion relation has been derived and several interesting limiting cases are also discussed. On the other hand, in the nonlinear case, by ignoring dissipative effects, the nonlinear set of equations admits a dipolar vortex type solution. The results of the present investigation should be helpful to understand some linear as well as nonlinear properties of magnetically confined dust-contaminated tokamak edge plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-ion acceleration through controlled surface contamination

In laser-plasma ion accelerators, control of target contamination layers can lead to selection of accelerated ion species and enhancement of acceleration. To demonstrate this, deuterons up to 75 keV are accelerated from an intense laser interaction with a glass target simply by placing 1 ml of heavy water inside the experimental chamber prior to pumping to generate a deuterated contamination layer on the target. Using the same technique with a deuterated-polystyrene-coated target also enhances deuteron yield by a factor of 3 to 5, while increasing the maximum energy of the generated deuterons to 140 keV.

74 ATOMIC AND MOLECULAR PHYSICS↗