Search NASA⌕ Search

SEARCH · Search NASA

Results for “High current density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Multinozzle Emitter Arrays for Nanoelectrospray Mass Spectrometry

Mass spectrometry (MS) is the enabling technology for proteomics and metabolomics. However, dramatic improvements in both sensitivity and throughput are still required to achieve routine MS-based single cell proteomics and metabolomics. Here, we report the silicon-based monolithic multinozzle emitter array (MEA), and demonstrate its proof-of-principle applications in high-sensitivity and high-throughput nanoelectrospray mass spectrometry. Our MEA consists of 96 identical 10-nozzle emitters in a circular array on a 3-inch silicon chip. The geometry and configuration of the emitters, the dimension and number of the nozzles, and the micropillar arrays embedded in the main channel, can be systematically and precisely controlled during the microfabrication process. Combining electrostatic simulation and experimental testing, we demonstrated that sharpened-end geometry at the stem of the individual multinozzle emitter significantly enhanced the electric fields at its protruding nozzle tips, enabling sequential nanoelectrospray for the high-density emitter array. We showed that electrospray current of the multinozzle emitter at a given total flow rate was approximately proportional to the square root of the number of its spraying-nozzles, suggesting the capability of high MS sensitivity for multinozzle emitters. Using a conventional Z-spray mass spectrometer, we demonstrated reproducible MS detection of peptides and proteins for serial MEA emitters, achieving sensitivity and stability comparable to the commercial capillary emitters. Our robust silicon-based MEA chip opens up the possibility of a fully-integrated microfluidic system for ultrahigh-sensitivity and ultrahigh-throughput proteomics and metabolomics.

47 OTHER INSTRUMENTATION↗

Energy transfer between two crossed laser beams in a nonisothermal plasma

The energy transfer between two crossed lasers (a high frequency high amplitude pump and a low frequency low amplitude probe beam) through the coupling with a difference frequency electrostatic mode/quasimode in a plasma is examined. The electrostatic mode in an unmagnetized plasma is a linearly damped acoustic mode, while in a magnetized plasma it is also taken to be a lower hybrid mode. It is driven by the ponderomotive force due to the pump and probe beams. The electron density perturbation associated with the electrostatic mode beats with the oscillatory velocities due to the lasers to produce nonlinear current densities facilitating the energy transfer from the high frequency laser to the probe beam. Efficient energy transfer occurs when the phase matching conditions are satisfied. Even when a finite mismatch between the lasers and the low frequency mode/quasimode exists, a significant energy transfer is possible. The theoretical results for the unmagnetized plasma are in compliance with the published experimental results. In a magnetized plasma lower hybrid wave appears to be a potential contender for facilitating energy exchange between lasers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid Model Analysis of the Distribution of the Negative Ion Density before the Extraction from a Tandem Type of a Plasma Source

Unified description of the expansion (through a magnetic filter) and extraction regions, including also the driver, of volume-production based sources of negative hydrogen ions is presented in the study. The model is one-dimensional, developed within the fluid plasma theory. It covers description of both the second chamber of the tandem sources and a single inductively-driven (with a planar coil) discharge of a matrix source. Four parameters have been varied in the analysis of the results: type, position and magnitude of the filter field and rf power applied for the discharge maintenance. The obtained results for the spatial distribution of the plasma parameters as well as for the electronegativity, for the negative ion beam current and its ratio to the electron current at the position of the extraction are discussed regarding optimum conditions for the source operation. The conclusion is that a magnetic field extended over a large region till the extraction favors locality in the discharge behavior and, respectively, the local production of the negative ions. This leads to high density of the extracted negative ion beam current at reasonable values of its ratio to the electron current density.

43 PARTICLE ACCELERATORS↗

Density fluctuations in solar wind flow types at 1 AU: Comparison to Doppler scintillation measurements

Density fluctuations with periods 10 minutes to 1 hour have been investigated in ISEE 3 plasma measurements of solar wind flows at l AU. Coronal hole, interstream, plasma sheet, coronal mass ejection, and interaction region flow types are considered. The ISEE 3 results support the interpretation of the large-scale variations in density fluctuations observed by Doppler scintillation measurement techniques inside 0.2 AU. The highest absolute and relative density fluctuations occur ahead of and within the plasma from coronal mass ejections, with the maximum values occurring between the associated interplanetary shocks and the driver gas. For the quasi-stationary solar wind, density and relative density fluctuations are highest around the heliospheric current sheet and lowest in the high-speed coronal flow. Superposed epoch analysis shows that the region of enhanced density fluctuations and its abrupt boundaries observed in the vicinity of the heliospheric current sheet near the Sun persists to l AU, providing further support for the filamentary nature of the extensions of coronal streamers. The results of this study confirm the advantages of using density fluctuations rather than density as a tracer of solar wind flows with differing origins at the Sun and as a detector of propagating interplanetary disturbances.

Huddleston, D. E.↗

Investigations on the effect of current density on SiO/Si composite electrodes

An oxide layer on the surface of silicon particles is inevitable and is necessary for their application as anode materials for lithium ion batteries with high capacity and durability. However, a thick surficial oxide layer could significantly reduce the capacity of a Si anode. Here, Si nanoparticles with a thick surficial oxide layer of ~20 nm (Si@SiO x ) were fabricated through thermal oxidation and investigated electrochemically. The results revealed that very low current density is needed to activate Si@SiO x anodes during the first formation cycle. Once activated, the Si@SiO x anode can deliver reversible capacity as high as ~1000 mAh/g with low current density. Then, the Si@SiO x can be cycled at higher current densities of >700 mAh/g. Electrochemical impedance spectroscopy (EIS) shows that the lower current density results in lower charge-transfer resistance of the Si@SiO x anode, suggesting a higher degree of lithiation of the surficial oxide layer during low-current activation. EIS analysis also reveals that the lithiation of the surficial oxide is irreversible. We believe that the surface silicon oxide layer is lithiated and forms lithium silicate during the initial activation process. Lithium silicate has high conductivity and allows the lithiation/delithiation of Si core under the oxide layer during following charge and discharge.

25 ENERGY STORAGE↗

Study on divertor detachment and pedestal characteristics in the DIII-D upper closed divertor

Abstract Experiments performed in DIII-D demonstrate that higher plasma current and heating power combined with impurity seeding facilitate the achievement of divertor detachment with a higher pedestal pressure and higher plasma performance in H-mode plasmas with a baffled closed divertor compared with an open divertor. Dedicated experiments were carried out to study the impact of power, plasma current and impurity seeding on divertor detachment with ion B × ∇ B directed into the divertor favorable for the L–H transition. With a factor of three variation in heating power and with only D 2 puffing, no significant difference in the separatrix density at detachment onset was found. The higher heating power leads to higher impurity concentration and wider scrape-off layer (SOL) width, and reduces the detachment onset density to one similar to that in lower-power plasmas. Higher current requires higher pedestal and line-averaged densities to achieve divertor detachment; however, the increase in separatrix density at increasing plasma current is found to be less pronounced. Initial calculations found that both power scan and plasma current scan datasets are qualitatively consistent with theory after considering the change in impurity concentration and heat flux width. This also motivates the future extensive study of transport and divertor impurity behavior in order to have a quantitative comparison between experiment and theory. Compared with an open divertor, a closed divertor facilitates detachment onset at ∼40% lower line-averaged plasma density. Additional N 2 seeding facilitates the achievement of detachment at a lower separatrix density and thus a higher pedestal temperature, which is beneficial for advanced tokamak scenarios. Higher heating power requires a higher N 2 puffing rate to achieve the same degree of detachment, while a higher N 2 puffing rate leads to lower detachment onset line-averaged density, both of which agree with theory. In contrast to the narrower pedestal in an open divertor approaching detachment, the pedestal density width in a closed divertor increases with density. The density gradient increases with line-averaged density at higher plasma current, but remains nearly unchanged at lower plasma current. In particular, compared with discharges with low power, at high heating power the pedestal density gradient is much weaker, while the SOL density is significantly higher and wider. At the same plasma current, both pedestal pressure gradient and temperature gradient decrease linearly with the line-averaged density but remain similar across different heating powers. Even with different plasma current and heating power, the normalized pressure gradient remains identical. As a result, achievement of divertor detachment with a higher pedestal pressure and higher plasma performance is shown in a closed divertor, which is important for improving core–edge integration as one of the critical issues for future tokamak fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two dimensional point of use fuel cell : a final LDRD project report.

The Proliferation Assessment (program area - Things Thin) within the Defense Systems and Assessment Investment Area desires high energy density and long-lived power sources with moderate currents (mA) that can be used as building blocks in platforms for the continuous monitoring of chemical, biological, and radiological agents. Fuel cells can be an optimum choice for a power source because of the high energy densities that are possible with liquid fuels. Additionally, power generation and fuel storage can be decoupled in a fuel cell for independent control of energy and power density for customized, application-driven power solutions. Direct methanol fuel cells (DMFC) are explored as a possible concept to develop into ultrathin or two-dimensional power sources. New developments in nanotechnology, advanced fabrication techniques, and materials science are exploited to create a planar DMFC that could be co-located with electronics in a chip format. Carbon nanotubes and pyrolyzed polymers are used as building block electrodes - porous, mechanically compliant current collectors. Directed assembly methods including surface functionalization and layer-by-layer deposition with polyelectrolytes are used to pattern, build, and add functionality to these electrodes. These same techniques are used to incorporate nanoscale selective electrocatalyst into the carbon electrodes to provide a high density of active electron transfer sites for the methanol oxidation and oxygen reduction reactions. The resulting electrodes are characterized in terms of their physical properties, electrocatalytic function, and selectivity to better understand how processing impacts their performance attributes. The basic function of a membrane electrode assembly is demonstrated for several prototype devices.

10 SYNTHETIC FUELS↗

Detecting the QCD phase transition in the next Galactic supernova neutrino burst

Predictions of the thermodynamic conditions for phase transitions at high baryon densities and large chemical potentials are currently uncertain and largely phenomenological. Neutrino observations of core-collapse supernovae can be used to constrain the situation. Recent simulations of stellar core collapse that include a description of quark matter predict a sharp burst of {nu}{sub e} several hundred milliseconds after the prompt {nu}{sub e} neutronization burst. We study the observational signatures of that {nu}{sub e} burst at current neutrino detectors--IceCube and Super-Kamiokande. For a Galactic core-collapse supernova, we find that signatures of the QCD phase transition can be detected, regardless of the neutrino oscillation scenario. The detection would constitute strong evidence of a phase transition in the stellar core, with implications for the equation of state at high matter density and the supernova explosion mechanism.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Rh x S y /C Catalyst for the Hydrogen Oxidation and Hydrogen Evolution Reactions in HBr

Rhodium sulfide (Rh 2 S 3 ) on carbon support was synthesized by refluxing rhodium chloride with ammonium thiosulfate. Thermal treatment of Rh 2 S 3 at high temperatures (600°C to 850°C) in presence of argon resulted in the transformation of Rh 2 S 3 into Rh 3 S 4 , Rh 17 S 15 and Rh which were characterized by TGA/DTA, XRD, EDX, and deconvolved XPS analyses. The catalyst particle size distribution ranged from 3 to 12 nm. Cyclic voltammetry and rotating disk electrode measurements were used to evaluate the catalytic activity for hydrogen oxidation and evolution reactions in H 2 SO 4 and HBr solutions. The thermally treated catalysts show high activity for the hydrogen reactions. The exchange current densities (i o ) of the synthesized Rh x S y catalysts in H 2 -saturated 1M H 2 SO 4 and 1M HBr for HER and HOR were 0.9 mA/cm 2 to 1.0 mA/cm 2 and 0.8 to 0.9 mA/cm 2 , respectively. The lower i o values obtained in 1M HBr solution compared to in H 2 SO 4 might be due to the adsorption of Br - on the active surface. Stable electrochemical active surface area (ECSA) of Rh x S y catalyst was obtained for CV scan limits between 0 V and 0.65 V vs. RHE. Scans with upper voltage limit beyond 0.65 V led to decreased and unreproducible ECSA measurements.

25 ENERGY STORAGE↗

Pinning Characteristics of Zr and Hf- Added REBCO Coated Conductors Made by Advanced MOCVD in Low-to-High Magnetic Fields

BaMO 3 (M=Zr, Hf) pinning centers introduced in REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors yield superior performance in high magnetic fields. We present the critical current density J c over a temperature range of 4.2-77 K and magnetic fields of 0-14 T (B || c-axis), of 5-15 mol.% Zr- and Hf-added REBCO 4+ μm thick film tapes fabricated by advanced metal organic chemical vapor deposition (A-MOCVD). The morphology of self-assembled BMO nanorods aligned along c-axis is found to be dependent on the Zr/Hf content. We also observe a correlation between the density of RE 2 O 3 in-plane nano-precipitates and the continuity and concentration of BMO nanorods in films of different Ba content. It is found that the (Ba+M)/Cu (M=Zr, Hf) content in REBa 2 Cu 3 O 7-x affects the shape of pinning force density curves over a wide magnetic field range and temperatures below 20 K. Another remarkable observation is the similarity in the critical current properties of Hf and Zr -added REBCO films as function of (Ba+M)/Cu content at intermediate to high range of (Ba+M)/Cu content. As a result, a quantitative analysis of pinning efficiency and correlation with the microstructure of Zr and Hf- added REBCO coated conductors is discussed.

2G high-temperature superconductor (2G-HTS)↗

Systems and methods of preparing lithium sulfur electrode using sacrificial template

Embodiments described herein relate generally to lithium sulfur batteries and methods of producing the same. As described herein, preventing coarsening of sulfur during the well-known melt-diffusion processing of cathodes allows a high areal capacity of 10.7 mAh/cm2 at current density of 3.4 mA/cm2 (C-rate of 1/5 h−1). The addition of a lithium salt, such as LiTFSI, prior to melt-diffusion can prevent coarsening of molten sulfur and allows creation of a sulfur electrode with a high concentration of triple-phase junctions for electrochemical reaction. In some embodiments, approximately 60-70% utilization of the theoretical capacity of sulfur is reached at a high loading (e.g., greater than 7.5 mg S/cm2). The electrodes are prepared in lean-electrolyte environment of 3 mlelectrolyte/gsulfur (˜70 vol % of electrolyte in the electrode) for high areal capacity in Li—S batteries.

Chen, Xinwei↗

V2O5 nanowires-graphene composite as an outstanding electrode material for high electrochemical performance and long-cycle-life supercapacitor

Highlights: • V{sub 2}O{sub 5} nanowires anchored on the surface of rGO sheets using facile hydrothermal method for energy storage application. • High gravimetric capacitance of 1002 F g{sup −1} has been achieved at the current density of 1 A g{sup −1} in an aqueous electrolyte. • Exceptionally high energy density of 116 Wh kg{sup −1} has been obtained using supercapacitor coin cell. • Composite (V{sub 2}O{sub 5}-NW-G) exhibits excellent cyclic stability with 83.94 % capacitance retention after 5000 GCD cycles. - Abstract: A composite of V{sub 2}O{sub 5} nanowires with reduced graphene oxide (V{sub 2}O{sub 5}-NW-G) has been prepared using facile hydrothermal method and tested for charge storage supercapacitor application. Morphological and structural aspects of as prepared materials has been studied using material characterization techniques like transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The nanosized wires like structure of V{sub 2}O{sub 5} anchored on the graphene (rGO) sheets possesses improved electrical conductivity and high surface area. Electrochemical properties of the synthesized materials have been studied using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS). Composite (V{sub 2}O{sub 5}-NW-G) exhibits exceptional properties like high gravimetric capacitance of 1002 F g{sup −1} along with good cyclic stability of 83.94% capacitance retention after 5000 repetitive GCD cycles. Excellent energy density of 116 Wh kg{sup −1} has been obtained at the power density of 1520 W kg{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion confinement and transport in a toroidal plasma with externally imposed radial electric fields

Strong electric fields were imposed along the minor radius of the toroidal plasma by biasing it with electrodes maintained at kilovolt potentials. Coherent, low-frequency disturbances characteristic of various magnetohydrodynamic instabilities were absent in the high-density, well-confined regime. High, direct-current radial electric fields with magnitudes up to 135 volts per centimeter penetrated inward to at least one-half the plasma radius. When the electric field pointed radially toward, the ion transport was inward against a strong local density gradient; and the plasma density and confinement time were significantly enhanced. The radial transport along the electric field appeared to be consistent with fluctuation-induced transport. With negative electrode polarity the particle confinement was consistent with a balance of two processes: a radial infusion of ions, in those sectors of the plasma not containing electrodes, that resulted from the radially inward fields; and ion losses to the electrodes, each of the which acted as a sink and drew ions out of the plasma. A simple model of particle confinement was proposed in which the particle confinement time is proportional to the plasma volume. The scaling predicted by this model was consistent with experimental measurements.

Roth, J. R.↗

Activating Nitrogen–doped Graphene Oxygen Reduction Electrocatalysts in Acidic Electrolytes using Hydrophobic Cavities and Proton–conductive Particles

Although pyridinic-nitrogen (pyri-N) doped graphene is highly active for the oxygen reduction reaction (ORR) of fuel cells in alkaline media, the activity critically decreases under acidic conditions. Herein we report on how to prevent the deactivation based on the mechanistic understanding that O 2 + pyri–NH ⁺ + e – → O 2,a + pyri–NH governs the ORR kinetics. First, we considered that the deactivation is due to the hydration of pyri-NH + , leading to a lower shift of the redox potential. Introducing the hydrophobic cavity prevented the hydration of pyri-NH + but inhibited the proton transport. We then increased proton conductivity in the hydrophobic cavity by introducing SiO 2 particles coated with ionic liquid polymer/Nafion® which kept the high onset potentials with an increased current density even in acidic media.

25 ENERGY STORAGE↗

Probability density function treatment of turbulence/chemistry interactions during the ignition of a temperature-stratified mixture for application to HCCI engine modeling

Homogeneous charge compression ignition (HCCI) engine technology promises to reduce NO{sub x} and soot emissions while achieving high thermal efficiency. Temperature and mixture stratification are regarded as effective means of controlling the start of combustion and reducing the abrupt pressure rise at high loads. Probability density function methods are currently being pursued as a viable approach to modeling the effects of turbulent mixing and mixture stratification on HCCI ignition. In this paper we present an assessment of the merits of three widely used mixing models in reproducing the moments of reactive scalars during the ignition of a lean hydrogen/air mixture ({phi}=0.1, p=41atm, and T=1070 K) under increasing temperature stratification and subject to decaying turbulence. The results from the solution of the evolution equation for a spatially homogeneous joint PDF of the reactive scalars are compared with available direct numerical simulation (DNS) data [E.R. Hawkes, R. Sankaran, P.P. Pebay, J.H. Chen, Combust. Flame 145 (1-2) (2006) 145-159]. The mixing models are found able to quantitatively reproduce the time history of the heat release rate, first and second moments of temperature, and hydroxyl radical mass fraction from the DNS results. Most importantly, the dependence of the heat release rate on the extent of the initial temperature stratification in the charge is also well captured. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Intensified Co-electrolysis Process for Syngas Production from Captured CO 2

CO 2 reduction to syngas provides a way of ameliorating carbon footprint and storing energy in high-energy-density and versatile feedstock. This current work explores the isothermal integration of CO2 capture with an intensified unit operation for the reduction of CO2 and capture media regeneration. Intensified captured CO2 co-electrolysis (ICC) to syngas (H2:CO ratio of 2) with low CO2 content (<10%) was demonstrated with over 70% CO2 conversion at a current density up to 0.20 A/cm2 for 14 hours of operation. Integration of the co-electrolysis unit with CO2 capture was performed feeding pure and diluted CO2, for which CO2 conversions >65% were observed. Performance of the capture unit becomes critical to maintain syngas ratios (SR). Technology feasibility was assessed through comparative techno-economic and life cycle analysis showing that process intensification enables competitive performance, even at the higher energy consumption featured at the current state of the technology. This because several unit operations can be avoided. LCA also showed that based on the current US electricity mix the reduction of life cycle CO2 emissions is possible at scenarios observed with 0.15 A/cm2 to accomplish a carbon-negative technology.

08 HYDROGEN↗

Simulation of laser-plasma interactions and fast-electron transport in inhomogeneous plasma

A new framework is introduced for kinetic simulation of laser-plasma interactions in an inhomogeneous plasma motivated by the goal of performing integrated kinetic simulations of fast-ignition laser fusion. The algorithm addresses the propagation and absorption of an intense electromagnetic wave in an ionized plasma leading to the generation and transport of an energetic electron component. The energetic electrons propagate farther into the plasma to much higher densities where Coulomb collisions become important. The high-density plasma supports an energetic electron current, return currents, self-consistent electric fields associated with maintaining quasi-neutrality, and self-consistent magnetic fields due to the currents. Collisions of the electrons and ions are calculated accurately to track the energetic electrons and model their interactions with the background plasma. Up to a density well above critical density, where the laser electromagnetic field is evanescent, Maxwell's equations are solved with a conventional particle-based, finite-difference scheme. In the higher-density plasma, Maxwell's equations are solved using an Ohm's law neglecting the inertia of the background electrons with the option of omitting the displacement current in Ampere's law. Particle equations of motion with binary collisions are solved for all electrons and ions throughout the system using weighted particles to resolve the density gradient efficiently. The algorithm is analyzed and demonstrated in simulation examples. The simulation scheme introduced here achieves significantly improved efficiencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comprehensive methods to enhance the electrochemical performances of LiFe{sub 0.94}Mg{sub 0.03}Cu{sub 0.03}PO{sub 4}/C cathode for lithium ion batteries

Graphical abstract: Relationships between the conductivities of LFPC-2 cathode and the volume percentages of AB (a) and PAn (b). - Highlights: • LiFe{sub 0.94}Mg{sub 0.03}Cu{sub 0.03}PO{sub 4}/C is synthesized by adding glucose with two-step method. • Conductive polymer polyaniline is used to replace acetylene black. • The content of conductive additive is optimized by the percolation theory. • LFPC-2 cathode containing polyaniline possesses the excellent performance. - Abstract: Comprehensive methods were utilized to improve the electrochemical performances of LiFe{sub 0.94}Mg{sub 0.03}Cu{sub 0.03}PO{sub 4}/C (LFPC) composite cathode. Experimental results show that LFPC-2, prepared by adding glucose in two steps, possesses the effective incorporated of doping ions and well-distributed pyrolysis carbon. It possesses higher conductivity and discharge capacity. The percolation theory analysis shows that the conductivity of LFPC-2 cathode film reaches its maximum value at the mass content of 15 wt.%. The replacement of acetylene black with polyaniline can greatly improve the electrochemical performances of LFPC-2 cathode. Its discharge capacity is 85.3 mAh g{sup −1} and its potential platform is as high as 3.2 V at the current density of 850 mA g{sup −1} when 15 wt.% polyaniline is used. The cycle performance of LFPC-2 is improved when polyaniline is used as conductive additives. And the change of charge transfer resistance of LFPC-2 cathode containing polyaniline is very small after 24 cycles.

36 MATERIALS SCIENCE↗