Search NASA⌕ Search

SEARCH · Search NASA

Results for “ION IMPLANTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Optical and structural properties of Eu-implanted In{sub x}Al{sub 1-x}N

Off-axis implantation of 80 keV Eu ions into epitaxial c-plane InAlN/GaN bilayers confines rare-earth (RE) doping largely to the InAlN layer. Rutherford backscattering spectrometry and x-ray diffraction show good correlations between the Eu{sup 3+} emission linewidth and key structural parameters of In{sub x}Al{sub 1-x}N films on GaN in the composition range near lattice matching (xapprox0.17). In contrast to GaN:Eu, selectively excited photoluminescence (PL) and PL excitation spectra reveal the presence of a single dominant optical center in InAlN. Eu{sup 3+} emission from In{sub 0.13}Al{sub 0.87}N:Eu also shows significantly less thermal quenching than GaN:Eu. InAlN films are therefore superior to GaN for RE optical doping.

36 MATERIALS SCIENCE↗

In situ transmission electron microscopy with dual ion beam irradiation and implantation

To study the helium effects and their interactions with displacement damage in irradiated materials, an in situ dual-ion beam irradiation capability with transmission electron microscopy was recently established at the IVEM-Tandem Facility at Argonne National Laboratory. Pure nickel was irradiated in situ individually with 1 MeV Kr ions for displacement damage study, 16 keV He ions for helium implantation, and simultaneously with 1 MeV Kr ions and 16 keV He ions at the rate of 1 at.% He/dpa to study the interaction of helium and displacement damage at 500 degrees C. Helium bubbles were formed and segregated within dislocation loops during the He implantation experiment and no bubbles were observed outside the loops. The loop size increased with increasing helium concentration. In contrast, helium bubbles were formed uniformly in the matrix when nickel was irradiated simultaneously with 1 MeV Kr ions and 16 keV He ions. Overall, it is suggested that the uniformly-distributed defect clusters formed under 1 MeV Kr ion irradiation serve as trapping sites of helium atoms resulting in homogeneous nucleation of helium bubbles under the dualion beam irradiation in nickel.

36 MATERIALS SCIENCE↗

Helium bubble nucleation and growth in alloy HT9 through the use of in situ TEM: Sequential he-implantation and heavy-ion irradiation versus dual-beam irradiation

The formation of He bubbles in Ferritic/Martensitic steel HT9 is investigated through the use of in situ Transmission Electron Microscopy coupled with He implantation and heavy ion irradiation. Of particular interest is the effect of increasing He appm/dpa ratio on the formation and growth of the bubbles, as well as the effect of the sequential order of ion irradiation i.e. He-pre-implantation followed by heavy-ion irradiation versus true dual-beam irradiation. Finally, the role of He is discussed.

Duemmler, Kai↗

Strong vortex core pinning and Barkhausen-free magnetization response in thin Permalloy disks induced by implantation of 1 × 10{sup 4} Ga{sup +} ions

Artificial vortex core pinning sites are induced in thin Permalloy disks by point exposure to as few as 10 000 ions from a focused Ga{sup +} beam. These pinning sites yield a first-order change in the magnetization response of the disk. A single site can keep the vortex core pinned over an applied field range comparable to the vortex annihilation field of the unaltered disk. Several widely separated sites can work together to keep the core pinned in one place, while the Barkhausen effect is eliminated from the magnetization curve over a range approaching the saturation moment of the disk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonance strength in {sup 22}Ne(p,gamma){sup 23}Na from depth profiling in aluminum

A novel method for extracting absolute resonance strengths has been investigated. By implanting {sup 22}Ne ions into a thick aluminum backing and simultaneously measuring the {sup 22}Ne+p and {sup 27}Al+p reactions, the strength of the E{sub r}{sup lab}=479 keV resonance in {sup 22}Ne(p,gamma){sup 23}Na was determined to be omegagamma=0.524(51) eV. This result has significantly reduced uncertainties compared to earlier work. Our results are important for the absolute normalizations of resonance strengths in the {sup 22}Ne(p,gamma){sup 23}Na hydrogen-burning reaction and in the {sup 22}Ne+alpha s-process neutron-source reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laser produced streams of Ge ions accelerated and optimized in the electric fields for implantation into SiO{sub 2} substrates

Ge crystals were prepared by means of laser-induced ion implantation technique. A Nd:YAG pulsed laser (repetition rate: 10 Hz; pulse duration: 3.5 ns; pulse energy: {approx}0.5 J) was used both as an ion source and to carry out the ablation processes. The optimization of the laser-generated ion beam parameters in a broad energy and current density range has been obtained controlling the electrostatic field parameters. Numerical simulations of the focusing system, performed adopting an OPERA 3D code, and an investigation of the ion characteristics, using the ion time-of-flight method, have allowed to optimize the preparation parameters. The structural properties of the samples were investigated by means of x-ray photoelectron, micro-Raman spectroscopies, and scanning electron microscopy techniques. Experimental results show that, by appropriately varying the ion implantation parameters and by a post-preparation annealing treatment, it is possible to achieve the development of a micrometer-sized crystalline Ge phase and/or an amorphous one.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The effect of helium on cavity swelling in dual-ion irradiated Fe and Fe-10Cr ferritic alloys

We report Ferritic-martensitic (FM) steels for in-vessel components in proposed fusion reactors are expected to suffer from high levels of displacement damage and helium (He) generation by neutron transmutation. However, a thorough understanding of the He synergistic effects on the cavity swelling in FM steels is still not well established. To gain fundamental insights into the He effect on cavity swelling, high purity Fe and Fe-10 wt.% Cr ferritic model alloys were irradiated with 8 MeV Ni ions and co-implanted He ions at 400 to 550 °C up to 30 displacements per atom (dpa) with He implantation rates of 0.1, 10 and 50 appm He/dpa. The current study focuses on the 50 appm He/dpa, 500 °C behavior vs. 0.1 and 10 appm He/dpa. Irradiation-induced defects, including cavities, dislocation loops, and dislocation networks were characterized using transmission electron microscopy (TEM). In the grain interior, a bimodal cavity size distribution was observed in the 10 and 50 appm He/dpa samples, but not for 0.1 appm He/dpa. Cavity swelling was maximized at intermediate He implantation rates of ~10 appm He/dpa for both ion-irradiated Fe and Fe-10Cr alloys. The cavity swelling behavior as a function of He implantation rate appears to be controlled by the He/dpa-dependent variation of cavity sink strengths. Treating small bubbles as biased sinks for interstitial absorption can significantly increase the ratio of biased to unbiased sink strengths (Q) and results in maximized cavity swelling for a Q ratio close to one.

36 MATERIALS SCIENCE↗

Ga-implantation in Ge: Electrical activation and clustering

The electrical activation and clustering of Ga implanted in crystalline Ge was investigated in the (0.3-1.2)x10{sup 21} Ga/cm{sup 3} concentration range. To this aim, Ge samples implanted with 50 keV gallium, and annealed at several temperatures up to 650 deg. C, have been subjected to a detailed structural and electrical characterization. The substrate was maintained at 77 K during implantation to avoid the formation of the honeycomb structure that occurs during implantation at room temperature of heavy ions at high fluence. Secondary ion mass spectrometry analyses indicated a negligible Ga diffusion and dopant loss during the thermal annealing. The carrier concentration in the recrystallized samples measured by Hall effect showed a maximum concentration of active Ga of approx6.6x10{sup 20} Ga/cm{sup 3}. A remarkable Ga deactivation occurred with increasing the annealing temperature from 450 to 650 deg. C although the sheet resistance did not change considerably in this temperature range. It turned out that the carrier concentration reduction is balanced by the enhancement of the hole mobility that exhibits a steep variation with the concentration of the ionized scattering centers in this range. A simple model is proposed to explain the experimental results taking into account the thermally activated Ga clustering. These studies, besides clarifying the mechanism of Ga deactivation in Ge, can be helpful for the realization of future generation devices based on Ge.

36 MATERIALS SCIENCE↗

Deuterium Uptake in Iron Oxide (Fe{sub 2}O{sub 3}) Under D{sub 2}{sup +}-Plasma Exposure

We have studied implantation of low-energy deuterium ions into Fe{sub 2}O{sub 3} films and deuterium (D)-uptake in Fe{sub 2}O{sub 3} films, which were prepared by oxidation of Fe sheets in air at 400 deg. C for 20 min. X-ray diffraction (XRD) shows that the films are mixture of hexagonal {alpha}-Fe{sub 2}O{sub 3}(hematite) and cubic {gamma}-Fe{sub 2}O{sub 3}(maghemite). According to Rutherford backscattering spectroscopy (RBS) of 1.8 MeV H{sup +}, the composition is found to be crudely stoichiometric (Fe:O = 2:3). The samples were subjected to D{sub 2}{sup +}-plasma exposure using AC-glow discharge. The amount of D-uptake in Fe{sub 2}O{sub 3} is evaluated to be {approx}6x10{sup 16} cm{sup 2} for AC voltage of 1.5 kV in 0.4 Torr of D{sub 2} gas for 15 min. The amount of D-uptake in Fe{sub 2}O{sub 3} appears to be larger by a factor of three than that in Fe. Comparisons of XRD patterns and RBS spectra before and after D{sub 2}{sup +}-plasma exposure show no appreciable change of the crystalline structure, quality and composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composition and Structure of Ga{sub 1–} {sub x}Na{sub x}As Nanolayers Produced near the GaAs Surface by Na{sup +} Implantation

The composition and structure of nanodimensional Ga{sub 1–} {sub x}Na{sub x}As phases produced by implantation of Na{sup +} ions into the near-surface area of GaAs have been studied by Auger electron spectroscopy and fast electron diffraction. It has been found that the thickness of the ternary epitaxial layer is 10–12 nm for ion energy E{sub 0} = 20 keV. The composition of the three-layer nanosystems is GaAs–Ga{sub 0.5}Na{sub 0.5}As–GaAs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of implanted species on thermal evolution of ion-induced defects in ZnO

Implanted atoms can affect the evolution of ion-induced defects in radiation hard materials exhibiting a high dynamic annealing and these processes are poorly understood. Here, we study the thermal evolution of structural defects in wurtzite ZnO samples implanted at room temperature with a wide range of ion species (from {sup 11}B to {sup 209}Bi) to ion doses up to 2 × 10{sup 16} cm{sup −2}. The structural disorder was characterized by a combination of Rutherford backscattering spectrometry, nuclear reaction analysis, and transmission electron microscopy, while secondary ion mass spectrometry was used to monitor the behavior of both the implanted elements and residual impurities, such as Li. The results show that the damage formation and its thermal evolution strongly depend on the ion species. In particular, for F implanted samples, a strong out-diffusion of the implanted ions results in an efficient crystal recovery already at 600 °C, while co-implantation with B (via BF{sub 2}) ions suppresses both the F out-diffusion and the lattice recovery at such low temperatures. The damage produced by heavy ions (such as Cd, Au, and Bi) exhibits a two-stage annealing behavior where efficient removal of point defects and small defect clusters occurs at temperatures ∼500 °C, while the second stage is characterized by a gradual and partial annealing of extended defects. These defects can persist even after treatment at 900 °C. In contrast, the defects produced by light and medium mass ions (O, B, and Zn) exhibit a more gradual annealing with increasing temperature without distinct stages. In addition, effects of the implanted species may lead to a nontrivial defect evolution during the annealing, with N, Ag, and Er as prime examples. In general, the obtained results are interpreted in terms of formation of different dopant-defect complexes and their thermal stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of high energy deuteron ion beam irradiation on the tensile behavior of HT-9

Ion beam implantations are widely performed to understand the effects of irradiation-induced displacement damage on nuclear structural materials. However, the volume of material that can be investigated is often limited by the maximum energies of accelerator facilitates, leading to a limitation in the thickness of samples whose mechanical properties can be evaluated. The Lawrence Berkeley National Laboratory’s 88-Inch Cyclotron offers a wide range of ions and energies, allowing for material ion implantations at larger scales than typical. Four HT-9 SS-J-geometry tensile specimens were polished and then irradiated with deuterons at the 88-Inch Cyclotron to doses of approximately 0.2 dpa prior to small scale tensile testing. Here, the results from this study show irradiation hardening characterized by the tensile test results and black dot irradiation defects. Additionally, a comprehensive look at low temperature irradiations of high-Cr F/M steels is presented and our results show agreement with the available data.

36 MATERIALS SCIENCE↗

Nissin Ion Doping System--H{sub 2}{sup +} Implantation for Silicon Layer Exfoliation

A Nissin iG4 ion doping system (termed iG4) utilizes broad beam technology to implant GEN 4 sheets of glass for LCD production. The mechanical scanned end-station with robotic handling for GEN 4 glass substrates was redesigned, and a new end-station was built to handle rectangular silicon tiles (23x18 cm). A three sub-system modular risk reduction process was used to test production solutions, and maximize the success of transferring the R and D implant recipes developed on a standard focused beam ion implanter to the Nissin broad beam iG4 solution. The silicon tile end-station including the implant scanning system was tested for reliability and durability. The end-station handled rectangular silicon tiles reliably without detrimental edge chipping or silicon breakage. The ion optics was demonstrated to successfully provide stable hydrogen ions for the Corning registered silicon on glass layer transfer process. This layer transfer process is very susceptible and sensitive to the implant processing temperature. The temperature excursions during implant processing for the iG4 exfoliation process were found to be in line with the R and D focused ion beam system. This data confirmed the system production-readiness in providing an efficient solution for the high volume production of hydrogen implanted silicon rectangular tiles.

36 MATERIALS SCIENCE↗

Electron irradiation-induced phase transformation in {alpha}-FeSi{sub 2}

Structural changes of {alpha}-FeSi{sub 2} induced by electron beam irradiation have been investigated using transmission electron microscopy (TEM). Single crystals of Si(111) were implanted with 120 keV Fe ions at -150 deg. C to a fluence of 1.0x10{sup 17} /cm{sup 2}, followed by thermally annealing at 350-550 deg. C. Cross-sectional and plan-view TEM observations revealed the formation of the metastable {alpha}-FeSi{sub 2} in the annealed samples. Under high-energy electron beam irradiation, the {alpha}-phase changed to a metastable crystalline phase whose structure is close to the CsCl structure. The phase transformation was caused mainly by displacement damage processes and suggests a low displacement energy for Fe atoms (<9 eV). To explain these observations, it was considered that vacancies in {alpha}-FeSi{sub 2} are responsible for the electron irradiation-induced phase transformation.

36 MATERIALS SCIENCE↗

Structure and optical properties of ZnO with silver nanoparticles

Textured nanocrystalline ZnO thin films are synthesized by ion beam assisted deposition. According to X-ray diffraction data, the crystallite size is ∼25 nm. Thin (∼15 nm) ZnO layers containing Ag nanoparticles are formed in a thin surface region of the films by the implantation of Ag ions with an energy of 30 keV and a dose in the range (0.25–1) × 10{sup 17} ion/cm{sup 2}. The structure and optical properties of the layers are studied. Histograms of the size distribution of Ag nanoparticles are obtained. The average size of the Ag nanoparticles varies from 0.5 to 1.5–2 nm depending on the Ag-ion implantation dose. The optical transmittance of the samples in the visible and ultraviolet regions increases, as the implantation dose is increased. The spectra of the absorption coefficient of the implanted films are calculated in the context of the (absorbing film)/(transparent substrate) model. It is found that the main changes in the optical-density spectra occur in the region of ∼380 nm, in which the major contribution to absorption is made by Ag nanoparticles smaller than 0.75 nm in diameter. In this spectral region, absorption gradually decreases, as the Ag-ion irradiation dose is increased. This is attributed to an increase in the average size of the Ag nanoparticles. It is established that the broad surface-plasmon-resonance absorption bands typical of nanocomposite ZnO films with Ag nanoparticles synthesized by ion implantation are defined by the fact that the size of the nanoparticles formed does not exceed 1.5–2 nm.

36 MATERIALS SCIENCE↗

In vitro prominent bone regeneration by release zinc ion from Zn-modified implant

Highlights: {yields} We isolated the Zn{sup 2+} ions (eluted Zn{sup 2+} ion; EZ) from zinc-incorporated titanium implant. {yields} The EZ promoted the cell viability in hBMCs. {yields} The EZ stimulated preosteoblast and osteoblast marker gene expression in hBMCs. {yields} The hBMCs supplemented with EZ showed typically cell morphology when osteoblast maturing. {yields} It is revealed that the EZ also stimulates the calcium deposition of hBMCs. -- Abstract: Zinc is one of the trace elements which induce the proliferation and the differentiation of the osteoblast. In the previous study, we found that zinc ions (Zn{sup 2+} ion)-releasing titanium implants had excellent bone fixation using a rabbit femurs model. In this study, we isolated the Zn{sup 2+} ions (eluted Zn{sup 2+} ion; EZ) released from the implant surface, and evaluated the effect of EZ on the osteogenesis of human bone marrow-derived mesenchymal cells (hBMCs). In the result, it was found that the EZ stimulated cell viability, osteoblast marker gene (type I collagen, osteocalcin (OC), alkaline phosphatase (ALP) and bone sialoprotein (BSP)) expressions and calcium deposition in hBMCs.

60 APPLIED LIFE SCIENCES↗

X-Ray Photoelectron Spectroscopy of Stabilized Zirconia Films with Embedded Au Nanoparticles Formed under Irradiation with Gold Ions

Nanosized films of stabilized zirconia with Au nanoparticles formed by implanting Au ions are studied by X-ray photoelectron spectroscopy and transmission electron microscopy. The effect of irradiation of films with Au ions and postimplantation annealing on the distribution of chemical elements and zirconium- containing ZrO{sub x} compounds over the depth of the films is studied. Based on the data on the dimensional shift of the Au 4 f photoelectron line, the average value of the nanoparticle size is determined.

77 NANOSCIENCE AND NANOTECHNOLOGY↗