Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Photon-exposure-dependent photon-stimulated desorption for obtaining photolysis cross section of molecules adsorbed on surface by monochromatic soft x-ray photons

Photon-exposure-dependent positive- and negative-ion photon-stimulated desorption (PSD) was proposed to study the photoreactions and obtain the photolysis cross sections of molecules adsorbed on a single-crystal surface by monochromatic soft x-ray photons with energy near the core level of adsorbate. The changes in the F{sup +} and F{sup -} PSD ion yields were measured from CF{sub 3}Cl molecules adsorbed on Si(111)-7x7 at 30 K (CF{sub 3}Cl dose=0.3x10{sup 15} molecules/cm{sup 2}, {approx}0.75 monolayer) during irradiation of monochromatic soft x-ray photons near the F(1s) edge. The PSD ion yield data show the following characteristics: (a) The dissociation of adsorbed CF{sub 3}Cl molecules is due to a combination of direct photodissociation via excitation of F(1s) core level and substrate-mediated dissociation [dissociative attachment and dipolar dissociation induced by the photoelectrons emitting from the silicon substrate]. (b) the F{sup +} ion desorption is associated with the bond breaking of the surface CF{sub 3}Cl, CF{sub 2}Cl, CFCl, and SiF species. (c) the F{sup -} yield is mainly due to DA and DD of the adsorbed CF{sub 3}Cl molecules. (d) The surface SiF is formed by reaction of the surface Si atom with the neutral fluorine atom, F{sup +}, or F{sup -} ion produced by scission of C-F bond of CF{sub 3}Cl, CF{sub 2}Cl, or CFCl species. A kinetic model was proposed for the explanation of the photolysis of this submonolayer CF{sub 3}Cl-covered surface. Based on this model and the variation rates of the F{sup +}/F{sup -} signals during fixed-energy monochromatic photon bombardment at 690.2 and 692.6 eV[near the F(1s) edge], the photolysis cross section was deduced as a function of energy.

36 MATERIALS SCIENCE↗

Ion Beam Layer Separation of Cadmium Zinc Telluride

We have investigated the approach of ion induced layer separation process for layer splitting from Cadmium Zinc Telluride (CZT) bulk single crystal and transferring and bonding the separated layers with Silicon (Si) wafers. Layer separation experiments have been carried out at UES using 1 MeV H{sup +} ions from the high energy accelerator (1.7 MV Tandetron). Ion dose and annealing temperature for complete separation of 1 cmx1 cm size layers have been optimized. Bonding of CZT with Si was accomplished using various IR transmitting chalcogenide glasses. Cracking of separated CZT films was occurring for chalcogenide glass bonded films. Optimization of thermal treatment has led to the minimization of such cracks. Detailed characterizations of the separated films will be presented.

36 MATERIALS SCIENCE↗

Depth Profiling of N and C in Ion Implanted ZnO and Si Using Deuterium Induced Nuclear Reaction Analysis

Nuclear Reaction Analysis (NRA) with deuteron ion beams has been used to probe for ion implanted nitrogen and carbon with high sensitivity in zinc oxide and silicon single crystals. The ion implanted N was measured using 1.4 MeV deuteron ion beams and was found to be in agreement with calculated values. The limit of detection for N in ZnO is 8x10{sup 14} ions cm{sup -2}. Raman measurements of the ion implanted samples showed three additional modes at 275, 504, and 644 cm{sup -1} compared to the un-implanted ZnO crystals. The NRA and Raman results provided information on the N concentration, depth distribution, and structural changes that occur in dependence on the nitrogen ion fluences. The deuterium induced {sup 12}C(d,p){sup 13}C reaction was used to measure the carbon impurity/dose in ion implanted silicon. It was found that the use of a large cold shield (liquid nitrogen trap) in the ion implanter chamber greatly reduces the amount of carbon impurity on the surface of ion implanted silicon. Various implantations with N{sub 2}, O{sub 2}, NO, NO{sub 2} and Pb ions were performed with and without cooling of the liquid nitrogen trap. Simultaneous detection of ppm-level concentrations of {sup 12}C, {sup 16}O and {sup 14}N enables highly sensitive measurement of impurities that may be incorporated during the fabrication process, transport of the samples and/or storage of the samples in air.

36 MATERIALS SCIENCE↗

Influence of the preparation conditions on the morphology of perylene thin films on Si(111) and Si(100)

Thin films of perylene on Si(111) and Si(100) substrates have been investigated using a variety of experimental techniques. We find that the structural and morphological properties as well as the growth modes strongly depend on the preparation parameters. In general, we observe the existence of a relatively weak coupling between perylene and the two single crystal substrates. However, under special preparation conditions, it is possible to obtain a multilayer phase on the Si(111) substrate that is characterized by flat-lying, parallel-oriented molecules, and strong coupling with the substrate in the first layer. This phase has different structural, electronic, and intermolecular bonding properties as compared to the known crystalline phases. On Si(100), by varying the deposition rate between 0.1 and 10 nm/min, it is possible to observe a transition from island growth mode, with large and isolated crystallites, to homogeneous film growth. These findings contribute to the basic knowledge for film engineering. Thus, the film morphology could be designed ranging from the growth of very large single grains suitable for a complete nanodevice to homogenous films for application in large displays.

36 MATERIALS SCIENCE↗

Single-crystal CeCl{sub 3}(CH{sub 3}OH){sub 4}: A new metal-organic cerium chloride methanol adduct for scintillator applications

A new scintillator material consisting of a methanol adduct of cerium trichloride with the composition CeCl{sub 3}(CH{sub 3}OH){sub 4} has been discovered and crystallized in the form of large single crystals by solution growth in methanol. The peak emission of the x-ray-excited luminescence spectrum occurs at {approx}364 nm. A light yield of up to {approx}16 600 photons/MeV and an energy resolution of 11.4% were obtained using 662 keV gamma-ray photons. The scintillator decay time for 662 keV gamma-ray excitation was measured using the time-correlated, single-photon-counting method, and a nominal value of 64.4 ns was obtained. The molecular adduct CeCl{sub 3}(CH{sub 3}OH){sub 4} represents the first example of a rare-earth, metal-organic scintillator that is applicable to gamma ray, x ray, and neutron detection.

36 MATERIALS SCIENCE↗

Absence of amorphous phase in high power femtosecond laser-ablated silicon

As femtosecond lasers emerge as viable tools for advanced microscale materials processing, it becomes increasingly important to understand the characteristics of materials resulting from femtosecond laser microablation or micromachining. We conducted transmission electron microscopy experiments to investigate crater structures in silicon produced by repetitive high power femtosecond laser ablation. Comparable experiments of nanosecond laser ablation of silicon were also performed. We found that an amorphous silicon layer that is typically produced in nanosecond laser ablation is absent when the material is irradiated by high power femtosecond laser pulses. Instead, only a defective single crystalline layer was observed in the high power femtosecond laser-ablated silicon crater. Possible mechanisms underlying the formation of the defective single crystalline phase are discussed.

36 MATERIALS SCIENCE↗

Nanoscale piezoresponse studies of ferroelectric domains in epitaxial BiFeO{sub 3} nanostructures.

We report the dependence of the ferroelectric domain configuration and switching behavior on the shape (square versus round) of epitaxial BiFeO{sub 3} (BFO) nanostructures. We fabricated (001) oriented BFO(120 nm)/SrRuO{sub 3}(SRO,125 nm) film layers on (001) SrTiO{sub 3} single crystals by rf magnetron sputter deposition, and patterned them to square (500 x 500 nm{sup 2}) and round (502 nm in diameter) shaped nanostructures by focused ion-beam lithography. The surface morphology and the crystalline structure of the nanostructures were characterized by scanning electron microscopy and x-ray diffraction, respectively, while the domain configuration was investigated using piezoelectric force microscopy. We found that the square-shaped nanostructures exhibit a single variant domain configuration aligned along the [{bar 1}1{bar 1}] direction, whereas the round-shaped nanostructures exhibit seven variants of domain configuration along the [{bar 1}1{bar 1}], [1{bar 1}{bar 1}], [11{bar 1}], [111], [{bar 1}11], [1{bar 1}1], and [{bar 1}{bar 1}1] directions. Moreover, local d{sub 33} piezoelectric coefficient measurements showed hysteresis loops with a strong displacement in the voltage axis (strong imprint) for the square-shaped nanostructures, while the round-shaped ones exhibited more symmetric loops. These findings have critical implications for the development of nanocapacitors for gigabyte to terabyte nonvolatile ferroelectric memories.

36 MATERIALS SCIENCE↗

Damage induced by electronic excitation in ion-irradiated yttria-stabilized zirconia

This article presents a study of the damage production in yttria-stabilized cubic zirconia single crystals irradiated with swift heavy ions. The combination of techniques which probe the material at different spatial scales (Rutherford backscattering spectrometry in channeling geometry, x-ray diffraction, transmission electron microscopy, and atomic force microscopy) was used in order to gain information about the damage depth distribution, the disordering buildup, the nature of radiation defects, and the occurrence of microstructural modifications. The damage results from the formation of tracks, due to the huge electronic excitations induced in the wake of incident ions. The melting of the material in the core of tracks, via a thermal spike mechanism, leads to the creation of large hillocks at the surface of the crystals. The overlapping of ion tracks at high fluence (above {approx}10{sup 12} cm{sup -2}) induces a severe transformation of the microstructure of the material. Nanodomains slightly disoriented from the main crystallographic direction are formed, with a size decreasing with increasing irradiation fluence. These results may be used to predict the damage evolution in other nonamorphizable ceramics irradiated with swift heavy ions.

36 MATERIALS SCIENCE↗

Microstructure and magnetic properties of FeCo epitaxial thin films grown on MgO single-crystal substrates

FeCo epitaxial films were prepared on MgO(100), MgO(110), and MgO(111) substrates by ultrahigh vacuum molecular beam epitaxy. FeCo thin films with (100), (211), and (110) planes parallel to the substrate surface grow on respective MgO substrates. FeCo/MgO interface structures are studied by high-resolution cross-sectional transmission electron microscopy and the epitaxial growth mechanism is discussed. Atomically sharp boundaries are recognized between the FeCo thin films and the MgO substrates where misfit dislocations are introduced in the FeCo thin films presumably to decrease the lattice misfits. Misfit dislocations are observed approximately every 9 and 1.4 nm in FeCo thin film at the FeCo/MgO(100) and the FeCo/MgO(110) interfaces, respectively. X-ray diffraction analysis indicates that the lattice spacing measured parallel to the single-crystal substrate surfaces are in agreement within 0.1% with those of the respective bulk values of Fe{sub 50}Co{sub 50} alloy crystal, showing that the FeCo film strain is very small. The magnetic anisotropies of these epitaxial films basically reflect the magnetocrystalline anisotropy of bulk FeCo alloy crystal.

36 MATERIALS SCIENCE↗

Raman-active Froehlich optical phonon mode in arsenic implanted ZnO

In this letter, using both off-resonant and resonant Raman spectroscopic techniques, the correlation of optical phonons and structural disorder in As{sup +} implanted ZnO single crystals has been investigated. An additional broad peak shoulder at 550 cm{sup -1} between the transverse optical and longitudinal optical (LO) phonons was clarified to be resonant Froehlich optical phonon mode in the framework of effective dielectric function. Under resonance condition, an asymmetric broadening and softening of the LO phonon along with a blueshifted luminescent peak revealed the decreasing phonon coherent length and nanocrystallization with increasing fluence, respectively, in good agreement with the observations of transmission electron microscopy and atomic force microscopy.

36 MATERIALS SCIENCE↗

Atomically smooth and single crystalline Ge(111)/cubic-Pr{sub 2}O{sub 3}(111)/Si(111) heterostructures: Structural and chemical composition study

Engineered wafer systems are an important materials science approach to achieve the global integration of single crystalline Ge layers on the Si platform. Here, we report the formation of single crystalline, fully relaxed Ge(111) films by molecular beam epitaxial overgrowth of cubic Pr oxide buffers on Si(111) substrates. Reflection high-energy electron diffraction, scanning electron microscopy, and x-ray reflectivity show that the Ge epilayer is closed, flat, and has a sharp interface with the underlying oxide template. Synchrotron radiation grazing incidence x-ray diffraction and transmission electron microscopy reveal the type-A/B/A epitaxial relationship of the Ge(111)/cubic Pr{sub 2}O{sub 3}(111)/Si(111) heterostructure, a result also corroborated by theoretical ab initio structure calculations. Secondary ion mass spectroscopy confirms the absence of Pr and Si impurities in the Ge(111) epilayer, even after an annealing at 825 deg. C.

36 MATERIALS SCIENCE↗

Dot arrays of L1{sub 1} type Co-Pt ordered alloy perpendicular films

Magnetic properties of dot arrays of L1{sub 1} type Co-Pt ordered alloy perpendicular films were studied. L1{sub 1}-Co-Pt films with a large uniaxial magnetic anisotropy K{sub u} of the order of 10{sup 7} erg/cm{sup 3} were fabricated at a substrate temperature of 360 deg. C using ultrahigh vacuum sputter film deposition. Dot patterns with dot diameters of 70-200 nm were made using high resolution e-beam lithography and reactive ion etching (RIE). The values of K{sub u} were measured by the GST method using the Anomalous Hall Effect; we observed the averaged signals of 6000 dots. The values of K{sub u} for dot arrays of 10-nm-thick L1{sub 1}-Co{sub 50}Pt{sub 50} films deposited on MgO(111) substrates (single crystal films) and glass disks (polycrystalline films) were nearly the same as those of the original films independent of D, indicating no significant etching damage by the RIE process. Magnetic force microscopy images revealed that all dots were single domains in the present D region. The coercivity H{sub c} of the dot arrays was 25.0 kOe [MgO(111) substrate, D=70 nm] and 14.3 kOe (glass disks, D=80 nm). The switching field distribution {sigma}/H{sub c} was relatively small, {sigma}/H{sub c}=0.15, even for dot arrays fabricated on glass disks, indicating the homogeneous formation of a L1{sub 1} type ordered structure in the Co{sub 50}Pt{sub 50} layers.

36 MATERIALS SCIENCE↗

Magnetic anisotropy modulation of magnetite in Fe{sub 3}O{sub 4}/BaTiO{sub 3}(100) epitaxial structures

Temperature dependent magnetometry and transport measurements on epitaxial Fe{sub 3}O{sub 4} films grown on BaTiO{sub 3}(100) single crystals by molecular beam epitaxy show a series of discontinuities, due to changes in the magnetic anisotropy induced by strain from the different crystal phases of BaTiO{sub 3}. The magnetite film is under tensile strain at room temperature, which is ascribed to the lattice expansion of BaTiO{sub 3} at the cubic to tetragonal transition, indicating that the magnetite film is relaxed at the growth temperature. From the magnetization versus temperature curves, the variation in the magnetic anisotropy is determined and compared with the magnetoelastic anisotropies. These results demonstrate the possibility of using the piezoelectric response of BaTiO{sub 3} to modulate the magnetic anisotropy of magnetite films.

36 MATERIALS SCIENCE↗

Enhanced growth of high quality single crystal diamond by microwave plasma assisted chemical vapor deposition at high gas pressures

Single crystals of diamond up to 18 mm in thickness have been grown by microwave plasma assisted chemical vapor deposition at gas pressures of up to 350 torr. Growth rates of up to 165 {mu}m/h at 300 torr at high power density have been achieved. The processes were evaluated by optical emission spectroscopy. The high-quality single-crystal diamond grown at optimized conditions was characterized by UV-visible absorption and photoluminescence spectroscopy. The measurements reveal a direct relationship between residual absorption and nitrogen content in the gas chemistry. Fabrication of high quality single-crystal diamond at higher growth rates should be possible with improved reactor design that allows still higher gas synthesis pressures.

36 MATERIALS SCIENCE↗

Reaction hysteresis of the CO+O{yields}CO{sub 2} reaction on palladium(111)

Rate measurements of the reaction CO+O{yields}CO{sub 2} on palladium(111) single crystal surfaces have been performed by means of mass spectroscopy under ultrahigh vacuum conditions. The total flux {phi} of the impinging reactants CO and O{sub 2} was held constant at 1 ML s{sup -1}, whereas its CO fraction Y was varied between 0 (pure O{sub 2}) and 1 (pure CO). The measurements have been performed for surface temperatures between 370 and 510 K and with a wide range of sampling times, evaluating the system parameter range for bistable behavior. Long-time measurements lasting several days proved the bistable behavior to result from two stable states rather than from slow processes not visible on usual experimental time scales. Pulselike modulations of the feed gas composition revealed the mechanisms confining the experimentally observed bistable range: the high CO fraction border of the bistability is given by the equistability condition of both states, whereas the other border is found to be associated with a saddle-node bifurcation in the corresponding system of reaction diffusion equations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of L1{sub 1}-type (Co-Ni)-Pt ordered alloy films by sputter deposition

L1{sub 1}-type (Co-Ni)-Pt ordered alloy perpendicular films were successfully fabricated on MgO(111) single crystal substrates using ultrahigh vacuum sputter film deposition; the addition of Ni to Co-Pt was effective to reduce saturation magnetization, M{sub s}, maintaining a large K{sub u} of the order of 10{sup 7} erg/cm{sup 3}. L1{sub 1}-type ordered structures, with the <111> direction (easy axis of magnetization) perpendicular to the films, were successfully fabricated at a substrate temperature of 360 deg. C in a wide composition range with Co content less than 60 at. %. The order parameter, S, was almost a constant of about 0.5 in the stoichiometric composition of (Co{sub 1-X}Ni{sub X}){sub 50}Pt{sub 50}, independent of Ni content, X. L1{sub 1}-type Co-Ni-Pt perpendicular films having a large K{sub u} of (1-2.5)x10{sup 7} erg/cm{sup 3} and a relatively low M{sub s} of 400-700 emu/cm{sup 3} were successfully fabricated in the composition range of 10-35 at. % Co, 20-55 at. % Ni, and bal. Pt. K{sub u} should increase further with enhanced ordering. Experimental results demonstrated the potential of these Co-Ni-Pt ordered films for use in data storage applications due to very high K{sub u} potential comparable to L1{sub 0}-type Fe{sub 50}Pt{sub 50} films, relatively low M{sub s}, the relatively low fabrication temperature, and good controllability of the grain orientation.

36 MATERIALS SCIENCE↗

Pseudoelastic behavior of Cu-Ni composite nanowires

We investigate the pseudoelastic behavior at room temperature of composite nanowires using molecular dynamics simulations. The nanowires are composed of a nickel core surrounded by a copper shell, leading to high coherency stresses. The coherency and surface stresses cause the nanowires to undergo a lattice reorientation, by twinning, from <001> to <110> during relaxation. Nanowires of different cross-sectional areas (varying from 2.17x2.17 up to 2.9x2.9 nm{sup 2}) were studied. In all cases, under tensile loading, the nanowires reorient to <001> and then under unloading reorient back to <110>, thus exhibiting pseudoelastic behavior. This behavior is more pronounced in composite nanowires with a coherent interface than for single crystal nanowires.

36 MATERIALS SCIENCE↗

Femtosecond laser-induced periodic surface structures revisited: A comparative study on ZnO

Laser-induced periodic surface structures (LIPSS) (ripples) with different spatial characteristics have been observed after irradiation of single-crystalline zinc oxide surfaces with multiple linearly polarized femtosecond pulses (150-200 fs, 800 nm) in air. For normal incident laser radiation, low spatial frequency LIPSS (LSFL) with a period (630-730 nm) close to the wavelength and an orientation perpendicular to the laser polarization have been found in the fluence range between {approx}0.7 and {approx}0.8 J/cm{sup 2} and predominantly for pulse numbers up to N=100. For lower fluences (0.5-0.7 J/cm{sup 2}), a sharp transition from the LSFL features toward the formation of high spatial frequency LIPSS (HSFL) appears at any given pulse number below N=100. The HSFL are always parallel to the LSFL, exhibit spatial periods between 200 and 280 nm, and completely substitute the LSFL for pulse numbers N>100. Additionally, the influence of the angle of incidence has been studied experimentally for both LIPSS types revealing a different behavior. Experimental evidence for surface scattered second harmonic generation is presented in the regime of HSFL formation. Moreover, we will show that the HSFL structures on ZnO surfaces can be fully explained by an extension of the existing LIPSS theories if the photoexcitation of the dielectric material (affecting its transient optical properties) is considered in the frame of a simple Drude model along with the second harmonic generation at the irradiated surface. Based on our analysis, the current models of femtosecond laser-induced LIPSS are revisited and an explanation is proposed why HSFL are observed predominantly in the subpicosecond range for below band-gap excitation of dielectrics and semiconductors.

36 MATERIALS SCIENCE↗