Search NASA⌕ Search

SEARCH · Search NASA

Results for “Operating Experience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Managing the Implementation of Mission Operations Automation

Reducing the cost of mission operations has necessitated a high level of automation both on spacecraft and ground systems. While automation on spacecraft is implemented during the design phase, ground system automation tends to be implemented during the prime mission operations phase. Experience has shown that this tendency for late automation development can be hindered by several factors: additional hardware and software resources may need to be procured; software must be developed and tested on a non-interference basis with primary operations with limited manpower; and established procedures may not be suited for automation requiring substantial rework. In this paper we will review the experience of successfully automating mission operations for seven on-orbit missions: the Compton Gamma Ray Observatory (CGRO), the Rossi X-Ray Timing Explorer (RXTE), the Advanced Composition Explorer (ACE), the Far Ultraviolet Spectroscopic Explorer (FUSE), Interplanetary Physics Laboratory (WIND), Polar Plasma Laboratory (POLAR), and the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE). We will provide lessons learned in areas such as: spacecraft recorder management, procedure development, lights out commanding from the ground system vs. stored command loads, spacecraft contingency response time, and ground station interfaces. Implementing automation strategies during the mission concept and spacecraft integration and test phase as the most efficient method will be discussed.

Sodano, R.↗

Apparatus analysis and preliminary design of low gravity porous solids experiment for STS Orbiter mid-deck

The apparatus analysis laboratory equipment design and fabrication and the preliminary design of the Combustion of Porous Solids Experiment for operation in the mid-deck area of the Shuttle are described. The apparatus analysis indicated that the mid-deck region of the STS was a feasible region of the Shuttle for operation. A sixteen tube concept was developed with tubes of 75 cm length and up to 5.6 cm accommodated. The experiment is viewed by IR sensors and a 16 mm camera. Laboratory equipment was designed and fabricated to test the parible injection, mixing and venting concepts. This equipment was delivered to NASA/LeRC. A preliminary design was made for the experiment based upon the apparatus analysis. The design incorporated results from the Phase ""O'' Safety Review. This design utilizes a closed tube concept in which the particles are stored, injected and burned with no coupling to the Shuttle environment. Drawings of the major components and an assembly are given. The electronics are described for the experiment. An equipment list is presented and an experiment weight estimate is determined. The mission operation requirements are outlined.

Fleeter, R. D.↗

U.S. Coast Guard Boat Recovery Simulation at NASA Ames Vertical Motion Simulator

The Boat Recovery Simulation was a collaboration between the U.S. Coast Guard and NASA. The experiment was conducted at the NASA Ames Vertical Motion Simulator (VMS). The goals were to (1) design a VMS experiment that can accurately simulate the motion of high sea conditions and to (2) collect data for the U.S. Coast Guard on human performance related to small boat recovery operations. The experiment setup included a software operation model designed around empirical boat position data; a replica boat section manufactured to incorporate real-world task elements; and the means to collect objective and subjective data from human participants. The VMS provided a viable testbed to assess certified U.S. Coast Guard crewmember’s task performance while in motion.

Riccobono, Nicholas S.↗

NIO1 diagnostics

The radio frequency ion source NIO1, jointly developed by Consorzio RFX and INFN-LNL, will generate a 60kV-135mA hydrogen negative ion beam, composed of 9 beamlets over an area of about 40 × 40 mm{sup 2}. This experiment will operate in continuous mode and in conditions similar to those foreseen for the larger ion sources of the Neutral Beam Injectors for ITER. The modular design of NIO1 is convenient to address the several still open important issues related to beam extraction, optics, and performance optimization. To this purpose a set of diagnostics is being implemented. Electric and water cooling plant related measurements will allow monitoring current, pressure, flow, and temperature. The plasma in the source will be characterized by emission spectroscopy, cavity ring-down and laser absorption spectroscopy. The accelerated beam will be analyzed with a fast emittance scanner, its intensity profile and divergence with beam emission spectroscopy and visible tomography. The power distribution of the beam on the calorimeter will be monitored by thermocouples and by an infrared camera. This contribution presents the implementation and initial operation of some of these diagnostics in the commissioning phase of the experiment, in particular the cooling water calorimetry and emission spectroscopy.

43 PARTICLE ACCELERATORS↗

Research in Neutrinoless Double-Beta Decay (Final Report)

The research objective of the supported work was to search for neutrinoless double-beta decay in 76 Ge and investigate and identify backgrounds to a double-beta decay search. Understanding the neutrino mass generation mechanism, the absolute neutrino mass scale, the neutrino mass spectrum, and the possible Majorana nature of neutrinos are some of the future discoveries of the next generation neutrino experiments. The Majorana collaboration operated the Demonstrator experiment comprising 44 kg (30 kg enriched in 76 Ge) of Ge detectors in total split between two modules contained in a low background shield at the Sanford Underground Research Facility in Lead, South Dakota. Observation of 0νββ would have profound implications for the Standard Model of particle physics by demonstrating that neutrinos are Majorana particles, that lepton number is not conserved, and it would provide a measure of the effective Majorana neutrino mass. The decay rate of 0νββ is incredibly small and may only produce a few signature events in a detector per year. Therefore, observation of this rare process demands a careful study and implementation of signal processing, detector design, and new levels of background suppression.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

View graphs for GSFC Colloquium on OFMspert

Viewgraphs providing an overview of activities concerned with the development and testing of the Operator Function Model (OFM) expert system (OFMspert) are presented. The OFM is a mathematical tool for representing operator interaction with predominantly automated space ground control systems. OFM provides cognitive task analysis and served as the basis for the design of an intelligent operator's associate called OMFspert. An experimental implementation of OFMspert, referred to as Ally, was developed. An empirical evaluation of Ally was conducted to determine the effectiveness of a supervisory control team consisting of a human operator and Ally versus a control team consisting of two human operators. The experiment was carried out in the GT-MSOCC (Georgia Tech MultiSatellite Operations Control Center) domain, a research tool consisting of a high fidelity implementation of the operator interface to a GSFC ground control system. The viewgraphs outline the experimental design, operator performance measures, and preliminary results.

Mitchell, Christine M.↗

Research Issues in Image Registration for Remote Sensing

Image registration is an important element in data processing for remote sensing with many applications and a wide range of solutions. Despite considerable investigation the field has not settled on a definitive solution for most applications and a number of questions remain open. This article looks at selected research issues by surveying the experience of operational satellite teams, application-specific requirements for Earth science, and our experiments in the evaluation of image registration algorithms with emphasis on the comparison of algorithms for subpixel accuracy. We conclude that remote sensing applications put particular demands on image registration algorithms to take into account domain-specific knowledge of geometric transformations and image content.

Eastman, Roger D.↗

METAL FOAMS: NOVEL MATERIALS FOR AIR COOLING AND HEATING APPLICATION- PERFORMANCE UNDER DRY, WET AND FROSTING CONDITIONS

Metal foams have emerged as a potential material for advanced heat exchangers in air-cooling systems. The novel materials have a large surface-area-to-volume ratio and a tortuous structure which promotes flow mixing in heat exchanger applications. The current study provides an overview of the thermal-hydraulic performance of metal foam heat exchangers under dry, wet and frosting operations. The experiments have been conducted in a wind tunnels at a range of operating conditions varying air flow rate, inlet air temperature and relative humidity and the associated pressure drop and heat transfer rate have been measured. The impact of metal foam geometry has been evaluated and the findings have been summarized for heat transfer rate and pressure drop when the heat exchanger operates at various operating conditions.

Nawaz, Kashif↗

NASA’s Laser Communications Relay Demonstration (LCRD) Experiment Program: Characterization And Initial Operations

The National Aeronautics and Space Administration’s (NASA) Laser Communications Relay Demonstration (LCRD) completed the first 18 months of its Experiment Program in December 2023. The LCRD geosynchronous payload includes two laser communications terminals interconnected via an onboard electronic switch. The payload can relay information between any two of a set of three ground stations. Two optical ground stations are located in California and Hawaii, and an RF ground station is located in New Mexico. Experiments to date have included demonstration of optimetrics, demonstrations of Delay/Disruption Tolerant Networking (DTN), and measurements of the effects of the atmosphere (turbulence, weather) on the performance and availability of lasercom (pointing, tracking, communications, and adaptive optics). Furthermore, future operational scenarios including robotic and exploration missions with various network service configurations have been emulated. This paper provides an overview and highlights of the first 18 months of LCRD experiments, and a preview of the upcoming experiments, including relaying data to and from the Integrated LCRD Low-Earth Orbit (LEO) User Modem and Amplifier Terminal (ILLUMA-T) on the International Space Station. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL).

David J. Israel↗

First DIII-D-West hybrid scenario similarity experiments for iter-relevant long-pulse operation

For the first time, similarity experiments between DIII-D and WEST were performed in the ITER "hybrid-like" regime during dedicated campaigns in April and May 2025. The matched parameters include elongation, triangularity, ion ∇B drift direction toward the X-point, qprofile, and core normalized physics quantities in terms of normalized pressure, normalized gyroradius, electron collisionality, ratio of ion to electron temperature, T i /T e . Core transport physics is explored with different aspect ratio (R/a) values (typically 3 at DIII-D and 5 on WEST). DIII-D explored high-beta conditions (electromagnetic effect) with low torque injection (~0 ± 0.5 N•m) using high heating power (up to 6 MW NBI and 2 MW ECRH powers), while scanning the heating mix (ion vs electron), beta, T i /T e , core radiation via controlled tungsten injection using the Laser Blow-Off system. WEST extended operation toward long-duration pulses using its actively cooled tungsten divertor, achieving dominated electron heating regimes with reduced tungsten contamination. Boron impurity injection were scanned on WEST to control edge conditions and core performance. It is found that core confinement improves-manifested by higher electron temperature, total energy content, neutron rate, and ion temperatureunder conditions of low separatrix density, consistent with previous observations [Bourdelle et al., Nucl. Fusion 63 (2023) 056021]. Conditions for Hmode access and for ion heating in electron-dominated regimes in both WEST and DIII-D will be discussed and compared. The ratio of the thermal energy confinement time (τ E ) to the volume-averaged electron-ion collisional heat exchange time (τ e-i ) is a key parameter to enhance ion heating and potentially facilitate H-mode access in electron-heated regimes. These first-of-a-kind coordinated DIII-D and WEST experiments provide a unique multi-machine dataset to validate predictive models and to optimize ITER hybrid-scenario performance under diverse core and edge conditions.

DIII-D↗

DarkSide-20k: A 20 tonne two-phase LAr TPC for direct dark matter detection at LNGS

Abstract. Building on the successful experience in operating the DarkSide-50 detector, the DarkSide Collaboration is going to construct DarkSide-20k, a direct WIMP search detector using a two-phase Liquid Argon Time Projection Chamber (LAr TPC) with an active (fiducial) mass of 23 t (20 t). This paper describes a preliminary design for the experiment, in which the DarkSide-20k LAr TPC is deployed within a shield/veto with a spherical Liquid Scintillator Veto (LSV) inside a cylindrical Water Cherenkov Veto (WCV). This preliminary design provides a baseline for the experiment to achieve its physics goals, while further development work will lead to the final optimization of the detector parameters and an eventual technical design. Operation of DarkSide-50 demonstrated a major reduction in the dominant 39Ar background when using argon extracted from an underground source, before applying pulse shape analysis. Data from DarkSide-50, in combination with MC simulation and analytical modeling, shows that a rejection factor for discrimination between electron and nuclear recoils of > 3 × 109 is achievable. This, along with the use of the veto system and utilizing silicon photomultipliers in the LAr TPC, are the keys to unlocking the path to large LAr TPC detector masses, while maintaining an experiment in which less than < 0.1 events (other than ?-induced nuclear recoils) is expected to occur within the WIMP search region during the planned exposure. DarkSide-20k will have ultra-low backgrounds than can be measured in situ, giving sensitivity to WIMP-nucleon cross sections of 1.2×10 -47 cm2 (1.1×10 -46 cm2) for WIMPs of 1TeV/c2 (10TeV/c2) mass, to be achieved during a 5 yr run producing an exposure of 100 t yr free from any instrumental background.

Aalseth, Craig E.↗

Chapter 2: Preface: Wind Power Myths Debunked

Wind power use has grown significantly in recent years. As power system planners, investors, and other stakeholders evaluate the development of wind power plants, many questions about wind power plant operational characteristics have arisen. These questions range from asking whether wind power plants require storage, to how fast can wind power plants' output fall to zero. Recent experience in operating power systems with increasing levels of wind power, along with a significant body of analysis, has provided answers to many of these questions. In this chapter, we discuss many of these key questions and answers drawing on international experience and analysis of wind power plant operations.

17 WIND ENERGY↗

The 30/20 GHz flight experiment system, phase 2. Volume 2: Experiment system description

A detailed technical description of the 30/20 GHz flight experiment system is presented. The overall communication system is described with performance analyses, communication operations, and experiment plans. Hardware descriptions of the payload are given with the tradeoff studies that led to the final design. The spacecraft bus which carries the payload is discussed and its interface with the launch vehicle system is described. Finally, the hardwares and the operations of the terrestrial segment are presented.

Bronstein, L.↗

Growth and Morphology of Supercritical Fluids Studied in Microgravity on Mir

The Growth and Morphology of Supercritical Fluids (GMSF) is an international experiment facilitated by the NASA Glenn Research Center at Lewis Field and under the guidance of U.S. principal investigator Professor John Hegseth of the University of New Orleans and three French coinvestigators Daniel Beysens, Yves Garrabos, and Carole Chabot. In early 1999, GMSF experiments were operated for 20 days on the Russian Space Station Mir. Mir astronauts performed experiments One through Seven, which spanned the three science themes of near-critical phase separation rates, interface dynamics in near-critical boiling, and measurement of the spectrum of density fluctuation length scales very close to the critical point. The fluids used were pure CO2 or SF6. Three of the five thermostats used could adjust the sample volume with the scheduled crew time. Such a volume adjustment enabled variable sample densities around the critical density as well as pressure steps (as distinct from the usual temperature steps) to be applied to the sample.

Wilkinson, R. Allen↗

The International Space Station: Operations and Assembly - Learning From Experiences - Past, Present, and Future

As the Space Shuttle continues flight, construction and assembly of the International Space Station (ISS) carries on as the United States and our International Partners resume the building, and continue to carry on the daily operations, of this impressive and historical Earth-orbiting research facility. In his January 14, 2004, speech announcing a new vision for America s space program, President Bush ratified the United States commitment to completing construction of the ISS by 2010. Since the launch and joining of the first two elements in 1998, the ISS and the partnership have experienced and overcome many challenges to assembly and operations, along with accomplishing many impressive achievements and historical firsts. These experiences and achievements over time have shaped our strategy, planning, and expectations. The continual operation and assembly of ISS leads to new knowledge about the design, development and operation of systems and hardware that will be utilized in the development of new deep-space vehicles needed to fulfill the Vision for Exploration and to generate the data and information that will enable our programs to return to the Moon and continue on to Mars. This paper will provide an overview of the complexity of the ISS Program, including a historical review of the major assembly events and operational milestones of the program, along with the upcoming assembly plans and scheduled missions of the space shuttle flights and ISS Assembly sequence.

Fuller, Sean↗

A Review of Well Integrity Based on Field Experience at Carbon Utilization and Storage Sites

Maintaining well integrity is critical to the success of geologic carbon storage (GCS) and carbon dioxide enhanced oil recovery (CO 2 -EOR) operations. Wells that experience leakage because of integrity issues can potentially become a risk to the environment or human health if they release previously captured CO 2 back into the atmosphere or into freshwater aquifers. There are many GCS and CO 2 -EOR sites in operation around the world. However, well integrity experiences at these sites are not widely documented in the public domain. This study details findings from a survey of well integrity experiences elicited from operators of GCS and CO 2 -EOR sites. The goal of the survey was to obtain information about site characteristics and operator experiences with well integrity, monitoring methods, and risk assessment of legacy wells. Literature relevant to the survey questions was also reviewed and summarized to provide context for survey responses and identify areas where field experiences with well integrity do and do not align with the current state of research. We highlight the current state-of-practice, identify research needs, and provide context for future interactions between researchers, operators, and regulators on issues related to well integrity.

54 ENVIRONMENTAL SCIENCES↗

The Large Area Crop Inventory Experiment /LACIE/ - An assessment after one year of operation

A Large Area Crop Inventory Experiment (LACIE) has been undertaken jointly by the U.S. Department of Agriculture (USDA), the National Oceanic and Atmospheric Administration (NOAA) of the Department of Commerce and the National Aeronautics and Space Administration (NASA) to prove out an economically important application of remote sensing from space. The first phase of the Experiment, which focused upon determinations of wheat area in the U.S. Great Plains and upon the development and testing of yield models, is now nearing completion. The system implemented to handle and analyze the Landsat and meteorological data has generally worked well and met operational goals. A very preliminary assessment of results to date indicates that the accuracy goals of the experiment can be met.

Macdonald, R. B.↗

JSC thunderstorm experiment results

To gain more insight into the various effects of lightning and thunderstorms on future shuttle vehicle launch and landing operations, an experiment was conducted to obtain data on the nature of electric fields in the vicinity of thunderstorms and particularly in the region of cumulonimbus cloud anvils during their various stages of build-up, maturity, and dissipation. These data supplement the airborne electric field data collected during the summer of 1975 in support of the Apollo Soyuz Test Project and the Viking launches. A Learjet aircraft was outfitted with four special electric field meters for collecting data. The onboard aircraft radar was also used to investigate cells embedded in large thunderstorm systems such as those found in frontal and squall line activities. Data were collected from 33 storm cells and used to establish a launch criteria to preclude triggering lightning during shuttle vehicle operations in close proximity to thunderstorms.

Source record↗