Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parallel application”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Architectures and Control of Submodule Integrated DC-DC Converters for Photovoltaic Applications

This paper describes photovoltaic (PV) module architectures with parallel-connected submodule-integrated dc-dc converters (subMICs) that improve efficiency of energy capture in the presence of partial shading or other mismatch conditions. The subMICs are bidirectional isolated dc-dc converters capable of injecting or subtracting currents to balance the module substring voltages. When no mismatches are present, the subMICs are simply shut down, resulting in zero insertion losses. It is shown that the objective of minimum subMIC power processing can be solved as a linear programming problem. A simple close-to-optimal distributed control approach is presented that allows autonomous subMIC control without the need for a central controller or any communication among the subMICs. Furthermore, the proposed control approach is well suited for an isolated-port architecture, which yields additional practical advantages including reduced subMIC power and voltage ratings. The architectures and the control approach are validated by simulations and experimental results using three bidirectional flyback subMICs attached to a standard 180-W, 72-cell PV module, yielding greater than 98% module-level power processing efficiency for a mismatch less than 25%.

Olalla, C↗

A Comparative Critical Analysis of Modern Task-Parallel Runtimes

The rise in node-level parallelism has increased interest in task-based parallel runtimes for a wide array of application areas. Applications have a wide variety of task spawning patterns which frequently change during the course of application execution, based on the algorithm or solver kernel in use. Task scheduling and load balance regimes, however, are often highly optimized for specific patterns. This paper uses four basic task spawning patterns to quantify the impact of specific scheduling policy decisions on execution time. We compare the behavior of six publicly available tasking runtimes: Intel Cilk, Intel Threading Building Blocks (TBB), Intel OpenMP, GCC OpenMP, Qthreads, and High Performance ParalleX (HPX). With the exception of Qthreads, the runtimes prove to have schedulers that are highly sensitive to application structure. No runtime is able to provide the best performance in all cases, and those that do provide the best performance in some cases, unfortunately, provide extremely poor performance when application structure does not match the scheduler's assumptions.

Wheeler, Kyle Bruce↗

Community Project for Accelerator Science and Simulation (ComPASS)

After concluding our initial exercise (solving a simplified statistical inverse problem with unknown parameter laser intensity) of coupling Vorpal and our parallel statistical library QUESO, we shifted the application focus to DLA. Our efforts focused on developing a Gaussian process (GP) emulator within QUESO for efficient optimization of power couplers within woodpiles. The smaller simulation size (compared with LPA) allows for sufficient “training runs” to develop a reasonable GP statistical emulator for a parameter space of moderate dimension.

43 PARTICLE ACCELERATORS↗

CSRI Summer Proceedings 2021

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia National Laboratories for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researches to learn about problems in computer and computational science at DOE laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, algebraic preconditioners, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, validation and verification methods, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers, beyond Moore’s Law computing, exascale computing tools and application design, reduced order and multiscale modeling, parallel input/output, and theoretical computer science. The CSRI Summer Program is organized by CSRI and includes a weekly seminar series and the publication of a summer proceedings.

97 MATHEMATICS AND COMPUTING↗

Management and Storage of Scientific Data

Scientific discoveries rely heavily on efficient access, search, and management of massive data sets. Data management technologies have, for decades, provided foundational capabilities for scientific computing. Just as storage, input/output (I/O), and data management have been fundamental to simulation-based science for many years, so too are capable data-management technologies key to the success of today’s scientific workflows utilizing data intensive and machine learning (ML) techniques. The Department of Energy, Office of Science, Advanced Scientific Computing Research (ASCR) program has invested broadly in data-management research focused on high-performance computing (HPC) systems, from parallel file systems that store data to application software that makes these systems more productive. Still, advances in technology combined with growing diversity of supported science strongly motivate continued investment in this area. In January 2022, ASCR convened a workshop to identify priority research directions in the area of data management for high-performance and scientific computing. Attendees were challenged to identify promising approaches that would support the breadth of the DOE mission, including the explosion of artificial intelligence (AI) uses and the growing needs of experimental and observational science. Technological and science drivers were identified and considered as they relate to key aspects of data management such as interfaces, architectural design, and FAIR principles (Findable, Accessible, Interoperable, and Reusable). The thoughts of the workshop participants were distilled into a set of four priority research directions with the potential for high impact on DOE science. These research directions are summarized in the following pages.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

CSRI Summer Proceedings 2021

The Computer Science Research Institute (CSRI) brings university faculty and students to Sandia National Laboratories for focused collaborative research on Department of Energy (DOE) computer and computational science problems. The institute provides an opportunity for university researches to learn about problems in computer and computational science at DOE laboratories, and help transfer results of their research to programs at the labs. Some specific CSRI research interest areas are: scalable solvers, optimization, algebraic preconditioners, graph-based, discrete, and combinatorial algorithms, uncertainty estimation, validation and verification methods, mesh generation, dynamic load-balancing, virus and other malicious-code defense, visualization, scalable cluster computers, beyond Moore’s Law computing, exascale computing tools and application design, reduced order and multiscale modeling, parallel input/output, and theoretical computer science. The CSRI Summer Program is organized by CSRI and includes a weekly seminar series and the publication of a summer proceedings.

97 MATHEMATICS AND COMPUTING↗

Assessment of ESM Readiness Level for Exascale HPC

Advancement of Earth System Models (ESMs) is becoming increasingly challenging due to a confluence of factors including increasing model complexity – to more fully represent the earth system, increasing spatial resolution - to achieve higher accuracy by resolving fine-scale dynamical to physical, biological, and chemical processes and their interaction, increasing ensemble size - to more accurately represent predictive uncertainty, and increased computing requirements – to enable more accurate and timely weather predictions and climate projections for societal benefit. The belief by many that computing will take care of itself is no longer valid given the disruptive changes in HPC that are driving up the cost of computing, increasing the difficulty of using emerging HPC effectively, and exposing limits in parallelism, portability and scalability of the ESM applications themselves.

54 ENVIRONMENTAL SCIENCES↗

REAL TIME SYSTEM OPERATIONS 2006-2007

The Real Time System Operations (RTSO) 2006-2007 project focused on two parallel technical tasks: (1) Real-Time Applications of Phasors for Monitoring, Alarming and Control; and (2) Real-Time Voltage Security Assessment (RTVSA) Prototype Tool. The overall goal of the phasor applications project was to accelerate adoption and foster greater use of new, more accurate, time-synchronized phasor measurements by conducting research and prototyping applications on California ISO's phasor platform - Real-Time Dynamics Monitoring System (RTDMS) -- that provide previously unavailable information on the dynamic stability of the grid. Feasibility assessment studies were conducted on potential application of this technology for small-signal stability monitoring, validating/improving existing stability nomograms, conducting frequency response analysis, and obtaining real-time sensitivity information on key metrics to assess grid stress. Based on study findings, prototype applications for real-time visualization and alarming, small-signal stability monitoring, measurement based sensitivity analysis and frequency response assessment were developed, factory- and field-tested at the California ISO and at BPA. The goal of the RTVSA project was to provide California ISO with a prototype voltage security assessment tool that runs in real time within California ISO?s new reliability and congestion management system. CERTS conducted a technical assessment of appropriate algorithms, developed a prototype incorporating state-of-art algorithms (such as the continuation power flow, direct method, boundary orbiting method, and hyperplanes) into a framework most suitable for an operations environment. Based on study findings, a functional specification was prepared, which the California ISO has since used to procure a production-quality tool that is now a part of a suite of advanced computational tools that is used by California ISO for reliability and congestion management.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Thin-film resistors used in functional electronic blocks

Vapor-deposited thin-film resistors replace diffused resistors in R-C tank circuits in a solid state electronic block. This allows an optimum parallel capacitance to be obtained for circuit applications requiring a high resistance and a low capacitance.

Source record↗

Use of Whatman-41 filters in air quality sampling networks (with applications to elemental analysis)

The operation of a 16-site parallel high volume air sampling network with glass fiber filters on one unit and Whatman-41 filters on the other is reported. The network data and data from several other experiments indicate that (1) Sampler-to-sampler and filter-to-filter variabilities are small; (2) hygroscopic affinity of Whatman-41 filters need not introduce errors; and (3) suspended particulate samples from glass fiber filters averaged slightly, but not statistically significantly, higher than from Whatman-41-filters. The results obtained demonstrate the practicability of Whatman-41 filters for air quality monitoring and elemental analysis.

Neustadter, H. E.↗

Free-stream disturbances, continuous eigenfunctions, boundary-layer instability and transition

A rational foundation is provided for the application of the linear stability theory of parallel shear flows to transition prediction. An explicit method is given for carrying out the necessary calculations. The expansions are shown to be complete. Sample calculations show that a typical boundary layer is very sensitive to vorticity disturbance in the inner boundary layer near the critical layer. Vorticity disturbances three or four boundary layer thicknesses above the boundary are nearly uncoupled from the boundary layer, in that the amplitudes of the discrete Tollmein-Schlichting waves are an extremely small fraction of the amplitude of the disturbance.

Salwen, H.↗

Solid modelling: History, status and current research directions

Research aimed at producing new generations of solid modelling systems, and at extending the applications of solid modelling, is in progress and will be discussed briefly in this paper. Three major bodies of work are emerging: solid-modelling extensions, applications in design, and applications in production. Each area contains many parallel streams of work, with considerable cross-flow of concepts and techniques between the streams and areas.

Voelcker, H. B.↗

Conduct of the International Multigrid Conference

The 1983 International Multigrid Conference was held at Colorado's Copper Mountain Ski Resort, April 5-8. It was organized jointly by the Institute for Computational Studies at Colorado State University, U.S.A., and the Gasellschaft fur Mathematik und Datenverarbeitung Bonn, F.R. Germany, and was sponsored by the Air Force Office of Sponsored Research and National Aeronautics and Space Administration Headquarters. The conference was attended by 80 scientists, divided by institution almost equally into private industry, research laboratories, and academia. Fifteen attendees came from countries other than the U.S.A. In addition to the fruitful discussions, the most significant factor of the conference was of course the lectures. The lecturers include most of the leaders in the field of multigrid research. The program offered a nice integrated blend of theory, numerical studies, basic research, and applications. Some of the new areas of research that have surfaced since the Koln-Porz conference include: the algebraic multigrid approach; multigrid treatment of Euler equations for inviscid fluid flow problems; 3-D problems; and the application of MG methods on vector and parallel computers.

Mccormick, S.↗

Concurrent processing adaptation of aeroplastic analysis of propfans

Discussed here is a study involving the adaptation of an advanced aeroelastic analysis program to run concurrently on a shared memory multiple processor computer. The program uses a three-dimensional compressible unsteady aerodynamic model and blade normal modes to calculate aeroelastic stability and response of propfan blades. The identification of the computational parallelism within the sequential code and the scheduling of the concurrent subtasks to minimize processor idle time are discussed. Processor idle time in the calculation of the unsteady aerodynamic coefficients was reduced by the simple strategy of appropriately ordering the computations. Speedup and efficiency results are presented for the calculation of the matched flutter point of an experimental propfan model. The results show that efficiencies above 70 percent can be obtained using the present implementation with 7 processors. The parallel computational strategy described here is also applicable to other aeroelastic analysis procedures based on panel methods.

Janetzke, David C.↗

Computational technology for flight vehicles; Proceedings of the Symposium on Computational Technology on Flight Vehicles, Washington, DC, Nov. 5-7, 1990

The present conference on computational methods for aeronautics applications discusses topics in the fields of parallel computing, multidisciplinary computational methods, grid generation, visualization methods for CFD, probabilistic modeling, numerical simulations and methodologies for different flow regimes, computational strategies and adaptive methods in CFD, and computational strategies and dynamics and control. Attention is given to the MACH system-software kernel, a multidisciplinary approach to aeroelastic analysis, interactive grid generation with control points, interactive flow visualization using stream surfaces, numerical simulations of dynamic/aerodynamic interactions, implicit mathods for the Navier-Stokes equations, and the automatic phase-space analysis of dynamical systems.

Noor, Ahmed K.↗

Concurrent processing adaptation of aeroelastic analysis of propfans

Discussed here is a study involving the adaptation of an advanced aeroelastic analysis program to run concurrently on a shared memory multiple processor computer. The program uses a three-dimensional compressible unsteady aerodynamic model and blade normal modes to calculate aeroelastic stability and response of propfan blades. The identification of the computational parallelism within the sequential code and the scheduling of the concurrent subtasks to minimize processor idle time are discussed. Processor idle time in the calculation of the unsteady aerodynamic coefficients was reduced by the simple strategy of appropriately ordering the computations. Speedup and efficiency results are presented for the calculation of the matched flutter point of an experimental propfan model. The results show that efficiencies above 70 percent can be obtained using the present implementation with 7 processors. The parallel computational strategy described here is also applicable to other aeroelastic analysis procedures based on panel methods.

Murthy, D. V.↗

Multidisciplinary computational aerosciences

By combining CFD with the computational state-of-the-art in structural mechanics, propulsion, aeroacoustics, electromagnetics, etc., multidisciplinary computational aerosciences (MCAS) poses a formidable computational challenge requiring the use of massively parallel machines. Research efforts must accordingly be directed to three areas: (1) parallel architectures, (2) systems software, and (3) applications software; attention is presently given to the last of these, in view of developments at NASA-Ames in solution methodology, physical modeling, and multidisciplinary validation experiments.

Kutler, P.↗

Dynamic Imbalance Would Counter Offcenter Thrust

Dynamic imbalance generated by offcenter thrust on rotating body eliminated by shifting some of mass of body to generate opposing dynamic imbalance. Technique proposed originally for spacecraft including massive crew module connected via long, lightweight intermediate structure to massive engine module, such that artificial gravitation in crew module generated by rotating spacecraft around axis parallel to thrust generated by engine. Also applicable to dynamic balancing of rotating terrestrial equipment to which offcenter forces applied.

Mccanna, Jason↗