Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Corrosion resistance of kolsterised austenitic 304 stainless steel

Austenitic stainless suffers from low wear resistance in applications where rubbing against other surfaces is encountered. This drawback can be overcome by surface treatment such as coating by hard materials. Other treatments such as carburization at relatively low temperature become applicable recently to improve hardness and wear resistance. Carburization heat treatment would only be justified if the corrosion resistance is unaffected. In this work samples of 304 stainless steels treated by colossal supersaturation case carburizing (known as Kolsterising) carried out by Bodycote Company was examined for pitting corrosion resistance at room temperature and at 50 °C. Comparison with results obtained for untreated samples in similar testing conditions show that there is no deterioration in the pitting resistance due to the Kolsterising heat treatment. X ray diffraction patterns obtained for Kolsterising sample showed that peaks correspond to the austenite phase has shifted to lower 2θ values compared with those of the untreated sample. The shift is an indication for expansion of austenite unit cells caused by saturation with diffusing carbon atoms. The XRD of Kolsterising samples also revealed additional peaks appeared in the patterns due to formation of carbides in the kolsterised layer. Examination of these additional peaks showed that these peaks are attributed to a type of carbide known as Hagg carbide Fe{sub 2}C{sub 5}. The absence of carbides that contain chromium means that no Cr depletion occurred in the layer and the corrosion properties are maintained. Surface hardness measurements showed large increase after Kolsterising heat treatment.

36 MATERIALS SCIENCE↗

Ultimate response time of high electron mobility transistors

We present theoretical studies of the response time of the two-dimensional gated electron gas to femtosecond pulses. Our hydrodynamic simulations show that the device response to a short pulse or a step-function signal is either smooth or oscillating time-decay at low and high mobility, μ, values, respectively. At small gate voltage swings, U{sub 0} = U{sub g} − U{sub th}, where U{sub g} is the gate voltage and U{sub th} is the threshold voltage, such that μU{sub 0}/L < v{sub s}, where L is the channel length and v{sub s} is the effective electron saturation velocity, the decay time in the low mobility samples is on the order of L{sup 2}/(μU{sub 0}), in agreement with the analytical drift model. However, the decay is preceded by a delay time on the order of L/s, where s is the plasma wave velocity. This delay is the ballistic transport signature in collision-dominated devices, which becomes important during very short time periods. In the high mobility devices, the period of the decaying oscillations is on the order of the plasma wave velocity transit time. Our analysis shows that short channel field effect transistors operating in the plasmonic regime can meet the requirements for applications as terahertz detectors, mixers, delay lines, and phase shifters in ultra high-speed wireless communication circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The complex mixed Wentzel–Kramers–Brillouin-full-wave approach and its application to the two dimensional mode structure analysis of ion temperature gradient/collisionless trapped electron mode drift waves

The complex mixed Wentzel–Kramers–Brillouin (WKB)-full-wave approach is applied to the 2D mode structure analysis of ion temperature gradient/collisionless trapped electron mode drift waves in tokamak plasmas. The parallel mode structure is calculated with the full-wave approach, while the radial envelope is calculated with the complex WKB method. The tilting of the global mode structure along radius is demonstrated analytically. The effects of the phase and amplitude variation of the radial envelope on the parallel mode structure are included in terms of a complex radial wave vector in the parallel mode equation. It is shown that the radial equilibrium non-uniformity leads to the asymmetry of the parallel mode structure not only in configuration space but also in spectrum space. The mixed approach provides a practical way to analyze the asymmetric component of the global mode structure due to radial equilibrium non-uniformity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystallographic and magnetic properties of the spinel-type ferrites Zn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 0.75)

Ultrahigh frequencies (UHF) have applications in signal and power electronics to minimize product sizes, increase production quantity and lower manufacturing cost. In the UHF range of 300 MHz to 3 GHz, ferrimagnetic iron oxides (ferrites) are especially useful because they combine the properties of a magnetic material with that of an electrical insulator. Ferrites have much higher electrical resistivity than metallic ferromagnetic materials, resulting in minimization of the eddy current losses, and total penetration of the electromagnetic (EM) field. Hence ferrites are frequently applied as circuit elements, magnetic storage media like read/write heads, phase shifters and Faraday rotators. The electromagnetic properties of ferrites are affected by operating conditions such as field strength, temperature and frequency. The spinel system Zn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (x=0.0, 0.25, 0.50 and 0.75) has been prepared by the standard solid state sintering method. X-ray and neutron powder diffraction measurements were performed at room temperature. Neutron diffraction data analysis confirms the cubic symmetry corresponding to the space group Fd3m. The distribution of three cations Zn{sup 2+}, Co{sup 2+} and Fe{sup 3+} over the spinel lattice and other crystallographic parameters like lattice constant, oxygen position parameter, overall temperature factor and occupancies of different ions in different lattice sites for the samples have been determined from the analysis of neutron diffraction data. The lattice constant increases with increasing Zn content in the system. The magnetic structure was found to be ferrimagnetic for the samples with x≤0.50. Magnetization measurements show that with the increase of Zn content in the system the value of saturation magnetization first increases and then decreases. The variation of the magnetic moment with Zn substitution has been discussed in terms of the distribution of magnetic and non-magnetic ions over the A and B sub-lattices and their exchange coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high-overtone bulk acoustic wave resonator-oscillator-based 4.596 GHz frequency source: Application to a coherent population trapping Cs vapor cell atomic clock

This article reports on the design and characterization of a high-overtone bulk acoustic wave resonator (HBAR)-oscillator-based 4.596 GHz frequency source. A 2.298 GHz signal, generated by an oscillator constructed around a thermally controlled two-port aluminum nitride-sapphire HBAR resonator with a Q-factor of 24 000 at 68 °C, is frequency multiplied by 2–4.596 GHz, half of the Cs atom clock frequency. The temperature coefficient of frequency of the HBAR is measured to be −23 ppm/ °C at 2.298 GHz. The measured phase noise of the 4.596 GHz source is −105 dB rad{sup 2}/Hz at 1 kHz offset and −150 dB rad{sup 2}/Hz at 100 kHz offset. The 4.596 GHz output signal is used as a local oscillator in a laboratory-prototype Cs microcell-based coherent population trapping atomic clock. The signal is stabilized onto the atomic transition frequency by tuning finely a voltage-controlled phase shifter implemented in the 2.298 GHz HBAR-oscillator loop, preventing the need for a high-power-consuming direct digital synthesis. The short-term fractional frequency stability of the free-running oscillator is 1.8 × 10{sup −9} at one second integration time. In locked regime, the latter is improved in a preliminary proof-of-concept experiment at the level of 6.6 × 10{sup −11} τ{sup −1/2} up to a few seconds and found to be limited by the signal-to-noise ratio of the detected CPT resonance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Circuit model of the ITER-like antenna for JET and simulation of its control algorithms

The ITER-like Antenna (ILA) for JET [1] is a 2 toroidal by 2 poloidal array of Resonant Double Loops (RDL) featuring in-vessel matching capacitors feeding RF current straps in conjugate-T manner, a low impedance quarter-wave impedance transformer, a service stub allowing hydraulic actuator and water cooling services to reach the aforementioned capacitors and a 2nd stage phase-shifter-stub matching circuit allowing to correct/choose the conjugate-T working impedance. Toroidally adjacent RDLs are fed from a 3dB hybrid splitter. It has been operated at 33, 42 and 47MHz on plasma (2008-2009) while it presently estimated frequency range is from 29 to 49MHz. At the time of the design (2001-2004) as well as the experiments the circuit models of the ILA were quite basic. The ILA front face and strap array Topica model was relatively crude and failed to correctly represent the poloidal central septum, Faraday Screen attachment as well as the segmented antenna central septum limiter. The ILA matching capacitors, T-junction, Vacuum Transmission Line (VTL) and Service Stubs were represented by lumped circuit elements and simple transmission line models. The assessment of the ILA results carried out to decide on the repair of the ILA identified that achieving routine full array operation requires a better understanding of the RF circuit, a feedback control algorithm for the 2nd stage matching as well as tighter calibrations of RF measurements. The paper presents the progress in modelling of the ILA comprising a more detailed Topica model of the front face for various plasma Scrape Off Layer profiles, a comprehensive HFSS model of the matching capacitors including internal bellows and electrode cylinders, 3D-EM models of the VTL including vacuum ceramic window, Service stub, a transmission line model of the 2nd stage matching circuit and main transmission lines including the 3dB hybrid splitters. A time evolving simulation using the improved circuit model allowed to design and simulate the effectiveness of a feedback control algorithm for the 2nd stage matching and demonstrates the simultaneous matching and control of the 4 RDLs: 11 feedback loops control 21 actuators (8 capacitors, 4 phase shifters and 4 stubs for the 2nd stage matching, 4 main phase shifters controlling of the toroidal phasing and the electronically controlled phase between RF sources feeding top and bottom parts of the array and determines the poloidal phasing of the array which is solved explicitly at each time step) on (simulated) ELMy plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Differential phase contrast in scanning x-ray microscopy with half-wavelength phase shifter

A method for differential-phase-contrast imaging in scanning x-ray microscopy is proposed. The microfocus beam is produced with an x-ray focusing optics, and a half of the optical aperture is masked with a λ/2 phase shifter. This generates a pair of focused beam at the focal plane, with π phase difference. Combining with a diaphragm in front of the transmission beam detector, differential phase contrast (contrast proportional to the phase-difference between two foci) can be obtained. Preliminary results with a Fresnel zone plate focusing optics at 12.4 keV x-ray energy are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phase shifter for antenna beam steering

Wide band Array Antenna operates in Ku-band (10.7-12.7 GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals. The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aim of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.

42 ENGINEERING↗

Simulink models for performance analysis of high speed DQPSK modulated optical link

This paper attempts to present the design approach for development of simulation models to study and analyze the transmission of 10 Gbps DQPSK signal over a single channel Peer to Peer link using Matlab Simulink. The simulation model considers the different optical components used in link design with their behavior represented initially by theoretical interpretation, including the transmitter topology, Mach Zehnder Modulator(MZM) module and, the propagation model for optical fibers etc. thus allowing scope for direct realization in experimental configurations. It provides the flexibility to incorporate the various photonic components as either user-defined or fixed and, can also be enhanced or removed from the model as per the design requirements. We describe the detailed operation and need of every component model and its representation in Simulink blocksets. Moreover the developed model can be extended in future to support Dense Wavelength Division Multiplexing (DWDM) system, thereby allowing high speed transmission with N × 40 Gbps systems. The various compensation techniques and their influence on system performance can be easily investigated by using such models.

42 ENGINEERING↗

Magnetic properties of lithium zinc ferrites synthesized by microwave sintered method

In this paper, a series of polycrystalline ferrite samples were prepared with the composition of Zn{sub 0.1}Li{sub 0.525-x}Ti{sub 0.15}Mg{sub x}Fe{sub 2.225-0.5x}O{sub 4} (LiZn) (x=0, 0.05, 0.10, 0.15 and 0.20) using both microwave sintering (MS) and conventional sintering (CS) technologies, respectively. The sintering time and temperature were 22 hours and 1000°C for the CS process, and 2 hours and 880°C for the MS process. Experiments showed that the MS treated LiZn ferrites exhibited more excellent magnetic properties and denser, more uniform micro-structures comparing with the ones treated by CS method. For the LiZn ferrite (x=0.1) sintered at 880°C using MS, the saturation magnetic induction (Bs) is 242.3 mT, the coercive force (Hc) is 135 A/m, the square ratio (Br/Bs) is 0.87 and the ferromagnetic resonance line-width (Δ H) is 143.2 Oe. These results represented very good properties for an X-band phase shifter material and indicated that the MS method is a potentially important technique for fabricating low temperature co-fired ceramics (LTCC).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of polarisation-nonuniform modes in a high-power CO{sub 2} laser

A method describing radially and azimuthally polarised laser modes is presented, which is devoid of intrinsic contradictions and unjustified restrictions. The solutions of the wave equation found in the paper satisfy Maxwell's equation bigtriangledownE = 0. This allowed the calculation of all the components of the fields of such modes, including the longitudinal one. Expressions for tight focusing of radially and azimuthally polarised modes are obtained in the Debye approximation. The methods of intracavity generation of such modes in a high-power industrial CO{sub 2} laser are experimentally realised and methods of mutual transformation of these modes outside the cavity are developed. The intracavity generation of azimuthally polarised modes was achieved by using as a rear highly reflecting mirror either V-shaped axicons or metal diffraction mirrors with the relief period comparable to the wavelength. Radially polarised radiation was generated by using diffraction mirrors with the relief period of the order of two wavelengths. The polarisation-nonuniform TEM{sub 01*} and TEM{sub 11*} modes of power up to 1.8 kW are generated for the first time. In this case, the degree of polarisation was close to 100% within the entire radiation power range both in the near- and far-field zones. By using two half-wave phase shifters, the azimuthally polarised radiation is transformed to radially polarised radiation and vice versa, the energy efficiency of this transformation being 92%. These results open up the possibility for industrial applications of such radiation. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coherent combining of diode laser beams in a master oscillator – zigzag slab power amplifier system

An integrated zigzag laser diode amplifier, with each segment (zigzag) consisting of three sections, is considered. The operation of this amplifier is analysed. It is shown that the presence of three sections with independent pump currents makes it possible to combine coherently all amplifier output beams. The first two sections in this configuration play the role of a phase shifter, and the third serves as a power amplifier. The influence of fluctuations of the output radiation phase in each segment on the resulting brightness of total output beam of the entire amplifier is investigated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Humidified single-scattering albedometer (H-CAPS-PM SSA ): Design, data analysis, and validation

In this work, we report the development and validation of a new humidified aerosol single-scattering albedometer to quantify the effects of water uptake on submicrometer particle optical properties. The instrument simultaneously measures in situ aerosol light extinction ( σ ep ) and scattering ( σ sp ) using a cavity-attenuated phase shift-single scattering albedo particulate matter (PM) monitor (CAPS-PM SSA , Aerodyne Research, Inc., Billerica, MA, USA). It retrieves by difference aerosol light absorption ( σ ap ) and directly quantifies aerosol single-scattering albedo (SSA), the aerosol “brightness.” We custom built a relative humidity (RH) control system using a water vapor-permeable membrane humidifier and coupled it to the CAPS-PM SSA to enable humidified aerosol observations. Our humidified instrument (H-CAPS-PM SSA ) overcomes problems with noise caused by mirror purge-flow humidification, heating, and characterizing cell RH. Careful angular truncation corrections in scattering, particularly for larger particles, were combined with empirical observations. Results show that the optimal operational size to be D p < 400 nm. The H-CAPS-PM SSA was evaluated with several pure single-component aerosols including ammonium sulfate ((NH 4 ) 2 SO 4 ), absorbing nigrosin, and levoglucosan, an organic biomass smoke tracer. The measured σ ep , σ sp , and the derived optical hygroscopicity parameter ( κ ) for size-selected ammonium sulfate are in good agreement with literature values. For dry size-selected nigrosin in the 100 < D p < 400 nm range, SSA values increased from ~0.3 to 0.65 with increasing D p . The enhancement in nigrosin σ ap at RH = 80% was a factor of 1.05–1.20 relative to dry conditions, with the larger particles showing greater enhancement. SSA increased with RH with the largest fractional enhancement measured for the smallest particles. For polydisperse levoglucosan, we measured an optical κ of 0.26 for both light extinction and scattering and negligible absorption. Our new instrument enables reliable observations of the effects of ambient humidity on mixed aerosol optical properties, particularly for light-absorbing aerosols whose climate forcing is uncertain due to measurement gaps.

54 ENVIRONMENTAL SCIENCES↗

A CHANGE IN THE LIGHT CURVE OF KUIPER BELT CONTACT BINARY (139775) 2001 QG{sub 298}

New observations show that the light curve of Kuiper Belt contact binary (139775) 2001 QG{sub 298} has changed substantially since the first observations in 2003. The 2010 light curve has a peak-to-peak photometric range of {Delta}m{sub 2010} = 0.7 {+-} 0.1 mag, significantly lower than in 2003, {Delta}m{sub 2003} = 1.14 {+-} 0.04 mag. This change is most simply interpreted if 2001 QG{sub 298} has an obliquity near 90{sup 0}. The observed decrease in {Delta}m is caused by a change in viewing geometry, from equator-on in 2003 to nearly 16{sup 0} (the orbital angular distance covered by the object between the observations) off the equator in 2010. The 2003 and 2010 light curves have the same rotation period and appear in phase when shifted by an integer number of full rotations, also consistent with high obliquity. Based on the new 2010 light curve data, we find that 2001 QG{sub 298} has an obliquity of {epsilon} = 90{sup 0} {+-} 30{sup 0}. Current estimates of the intrinsic fraction of contact binaries in the Kuiper Belt are debiased assuming that these objects have randomly oriented spins. If, as 2001 QG2{sub 98}, Kuiper Belt Object contact binaries tend to have large obliquities, a larger correction is required. As a result, the abundance of contact binaries may be larger than previously believed.

79 ASTRONOMY AND ASTROPHYSICS↗

TEMPORAL AND SPECTRAL EVOLUTION IN X- AND {gamma}-RAYS OF MAGNETAR 1E 1547.0-5408 SINCE ITS 2008 OCTOBER OUTBURST: THE DISCOVERY OF A TRANSIENT HARD PULSED COMPONENT AFTER ITS 2009 JANUARY OUTBURST

The magnetar 1E 1547.0-5408 exhibited outbursts in 2008 October and 2009 January. In this paper, we present in great detail the evolution of the temporal and spectral characteristics of the persistent total and pulsed emission of 1E 1547.0-5408 between {approx}1 and 300 keV starting on 2008 October 3 and ending in 2011 January. We analyzed data collected with the Rossi X-ray Timing Explorer (RXTE) the International Gamma-Ray Astrophysics Laboratory (INTEGRAL), and the Swift satellite. We report the evolution of the pulse frequency, and the measurement at the time of the onset of the 2009 January outburst of an insignificant jump in frequency, but a major frequency derivative jump {Delta}{nu}-dot of +(1.30 {+-} 0.14) Multiplication-Sign 10{sup -11} Hz s{sup -1} ({Delta}{nu}-dot/{nu}-dot of -0.69 {+-} 0.07). Before this {nu}-dot glitch, a single broad pulse is detected, mainly for energies below {approx}10 keV. Surprisingly, {approx}11 days after the glitch a new transient high-energy (up to {approx}150 keV) pulse appears with a Gaussian shape and width 0.23, shifted in phase by {approx}0.31 compared to the low-energy pulse, which smoothly fades to undetectable levels in {approx}350 days. We report the evolution of the pulsed-emission spectra. For energies 2.5-10 keV all pulsed spectra are very soft with photon indices {Gamma} between -4.6 and -3.9. For {approx}10-150 keV, after the {nu}-dot glitch, we report hard non-thermal pulsed spectra, similar to what has been reported for the persistent pulsed emission of some anomalous X-ray pulsars. This pulsed hard X-ray emission reached maximal luminosity 70 {+-} 30 days after the glitch epoch, followed by a gradual decrease by more than a factor of 10 over {approx}300 days. These characteristics differ from those of the total emission. Both, the total soft X-ray (1-10 keV) and hard X-ray (10-150 keV) fluxes, were maximal already 2 days after the 2009 January outburst, and decayed by a factor of {approx}>3 over {approx}400 days. The total spectra can be described with a blackbody (kT values varying in the range 0.57-0.74 keV) plus a single power-law model. The photon index exhibited a hardening ({approx} - 1.4 to {approx} - 0.9) with time, correlated with a decrease in flux in the 20-300 keV band. We discuss these findings in the framework of the magnetar model.

79 ASTRONOMY AND ASTROPHYSICS↗

A unified lense-thirring precession model for optical and X-ray quasi-periodic oscillations in black hole binaries

Recent observations of accreting black holes reveal the presence of quasi-periodic oscillations (QPO) in the optical power density spectra. The corresponding oscillation periods match those found in X-rays, implying a common origin. Among the numerous suggested X-ray QPO mechanisms, some may also work in the optical. However, their relevance to the broadband—optical through X-ray—spectral properties have not been investigated. For the first time, we discuss the QPO mechanism in the context of the self-consistent spectral model. We propose that the QPOs are produced by Lense-Thirring precession of the hot accretion flow, whose outer parts radiate in optical wavelengths. At the same time, its innermost parts are emitting X-rays, which explains the observed connection of QPO periods. We predict that the X-ray and optical QPOs should be either in phase or shifted by half a period, depending on the observer position. We investigate the QPO harmonic content and find that the variability amplitudes at the fundamental frequency are larger in the optical, while the X-rays are expected to have strong harmonics. We then discuss the QPO spectral dependence and compare the expectations to the existing data.

79 ASTRONOMY AND ASTROPHYSICS↗

ARGO-YBJ OBSERVATION OF THE LARGE-SCALE COSMIC RAY ANISOTROPY DURING THE SOLAR MINIMUM BETWEEN CYCLES 23 AND 24

This paper reports on the measurement of the large-scale anisotropy in the distribution of cosmic-ray arrival directions using the data collected by the air shower detector ARGO-YBJ from 2008 January to 2009 December, during the minimum of solar activity between cycles 23 and 24. In this period, more than 2 × 10{sup 11} showers were recorded with energies between ∼1 and 30 TeV. The observed two-dimensional distribution of cosmic rays is characterized by two wide regions of excess and deficit, respectively, both of relative intensity ∼10{sup −3} with respect to a uniform flux, superimposed on smaller size structures. The harmonic analysis shows that the large-scale cosmic-ray relative intensity as a function of R.A. can be described by the first and second terms of a Fouries series. The high event statistics allow the study of the energy dependence of the anistropy, showing that the amplitude increases with energy, with a maximum intensity at ∼10 TeV, and then decreases while the phase slowly shifts toward lower values of R.A. with increasing energy. The ARGO-YBJ data provide accurate observations over more than a decade of energy around this feature of the anisotropy spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

A full-potential approach to the relativistic single-site Green's function

One major purpose of studying the single-site scattering problem is to obtain the scattering matrices and differential equation solutions indispensable to multiple scattering theory (MST) calculations. On the other hand, the single-site scattering itself is also appealing because it reveals the physical environment experienced by electrons around the scattering center. In this study, we demonstrate a new formalism to calculate the relativistic full-potential single-site Green's function. We implement this method to calculate the single-site density of states and electron charge densities. Lastly, the code is rigorously tested and with the help of Krein's theorem, the relativistic effects and full potential effects in group V elements and noble metals are thoroughly investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗