Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Tensile deformation and fracture behavior of spray-deposition 7075/15SiC{sub p} aluminum matrix composite sheet at elevated temperatures

The tensile deformation and fracture behavior of spray-deposition 7075/15SiC{sub p} (15 vol.% SiC particle) aluminum matrix composite sheet were studied by uniaxial tension tests at temperatures ranging from 300 deg. C to 450 deg. C and strain rates of 0.001-0.1 s{sup -1}, and the fracture surfaces were examined by using a scanning electron microscopy. The results show that strain softening is present up to the point of failure and the flow stress level increases with increasing strain rate but decreases with increasing temperature. The total elongation to fracture increases with increasing temperature and with decreasing strain rate. The maximum strain rate sensitivity exponent is 0.24 which is much lower than that of typical superplastic materials. The apparent activation energy is calculated to be approximately 379 kJ/mol which is much higher than its unreinforced counterpart. The fracture surface morphology shows a large amount of localized plastic deformation in the aluminum matrix and numerous large cavities around the reinforcement. The absence of strain accommodation by interface sliding might have caused premature failure at the reinforcement/matrix interface.

36 MATERIALS SCIENCE↗

Modeling of Sandwich Sheets with Metallic Foam

World-wide vehicles safety experts agree that significant further reductions in fatalities and injuries can be achieved as a result of the use of new lightweight and energy absorbing materials. On this work, the authors present the development and evaluation of an innovative system able to perform reliable panels of sandwich sheets with metallic foam cores for industrial applications. The mathematical model used to describe the behavior of sandwich shells with metal cores foam is presented and some numerical examples are presented. In order to validate those results mechanical experiments are carried out. Using the crushable foam constitutive model, available on ABAQUS, a set of different mechanical tests were simulated. There are two variants of this model available on ABAQUS: the volumetric hardening model and the isotropic hardening model. As a first approximation we chose the isotropic hardening variant. The isotropic hardening model available uses a yield surface that is an ellipse centered at the origin in the p-q stress plane. Based on this constitutive model for the foam, numerical simulations of the tensile and bulge test will be conducted. The numerical results will be validated using the data obtained from the experimental results.

36 MATERIALS SCIENCE↗

Utility of anthesis–silking interval information to predict grain yield under water and nitrogen limited conditions

Delayed silking relative to pollen shed, measured as the anthesis–silking interval (ASI, the period between pollen shed and silking), is a good indicator of response to abiotic stresses in maize ( Zea mays L.). This research was conducted to investigate how ASI is affected by nitrogen (N) and water availability and to assess the utility of ASI to indirectly predict grain yield (GY) under contrasting water and N treatments. Two experiments were conducted in Hancock, WI, in 2018 and 2019. One experiment (Diverse hybrids) included 302 hybrids resulting from the cross of diverse inbred lines by a single tester evaluated at four different treatment levels resulting from combining nonlimited and low N with nonlimited and low water treatments. The second experiment (NSS FAC) included a set of 408 hybrids derived from the cross of biparental doubled-haploid lines from 13 factorial populations and evaluated under nonlimited and low N treatments. Anthesis and silk time in growing degree days, and GY (Mg ha -1 ) were measured. Genomic prediction was assessed using a genomic best linear unbiased prediction model, and predictive ability was calculated as the correlation between genomic predictions and adjusted means in the different treatments. Predictive ability ranged from .15 to .49 for NSS FAC and from .06 to .51 for Diverse hybrids across traits and treatments. The ASI was a good indicator of stress and showed higher heritability than GY in the limited treatments for both experiments; however, it did not improve yield predictability.

59 BASIC BIOLOGICAL SCIENCES↗

Communication: Effect of accidental mode degeneracy on Raman intensity in 2D materials: Hybrid functional study of bilayer phosphorene

Bulk black phosphorus has two optical phonon modes labeled as A{sub g}{sup 2} and B{sub 2u}, respectively, that are nearly degenerate in frequency. However, density functional theory calculations using local or semi-local functionals cannot reproduce this degeneracy. Here, we propose a hybrid functional approach aided by van der Waals (vdW) force fields, which can accurately describe the lattice dynamic and electronic properties of both bulk and few-layer black phosphorus (phosphorene). Using this approach we show that in bilayer phosphorene, the two Raman modes derived from the B{sub 2u} and A{sub g}{sup 2} modes could exhibit strong resonance as a result of the accidental degeneracy so that both modes could be observed in Raman experiment. Without the mode degeneracy, however, the Raman intensity of the B{sub 2u}-derived mode would be too weak to be observed. We further show that the accidental degeneracy is correlated to the applied strain, which enables Raman spectroscopy to be a powerful tool for characterizing built-in strains in 2D materials, e.g., due to the interaction with substrates, which has emerged as an important issue in vdW epitaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recursion relations for AdS/CFT correlators

We expand on the results of our recent letter [Phys. Rev. Lett. 106, 091601 (2011)], where we presented new recursion relations for correlation functions of the stress-tensor and conserved currents in conformal field theories with an AdS{sub d+1} dual for d{>=}4. These recursion relations are derived by generalizing the Britto-Cachazo-Feng-Witten (BCFW) relations to amplitudes in anti-de Sitter space (AdS) that are dual to boundary correlators, and are usually computed perturbatively by Witten diagrams. Our results relate vacuum-correlation functions to integrated products of lower-point transition amplitudes, which correspond to correlators calculated between states dual to certain normalizable modes. We show that the set of ''polarization vectors'' for which amplitudes behave well under the BCFW extension is smaller than in flat-space. We describe how transition amplitudes for more general external polarizations can be constructed by combining answers obtained by different pairs of BCFW shifts. We then generalize these recursion relations to supersymmetric theories. In AdS, unlike flat-space, even maximal supersymmetry is insufficient to permit the computation of all correlators of operators in the same multiplet as a stress-tensor or conserved current. Finally, we work out some simple examples to verify our results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The effects of free surfaces on deformation twinning in HCP metals

Deformation twinning is a predominant mode of plastic deformation for hexagonal close packed metals, like Mg and Ti. The heterogenous microstructure and the local stresses associated with twinning play a key role in their mechanical response and fracture. Surface analyses, like electron microscopy, are frequently employed to spatially map microstructure and micromechanical fields in order to study twinning behavior. However, these measurements are inherently influenced by the vicinity of the free surface. In this work, an elasto-visco-plastic fast-Fourier-transform (EVP-FFT) polycrystal modeling approach is employed to investigate the effects of free surfaces on twin development before and after loading. We compare calculated micromechanical fields on free surfaces with those calculated inside the bulk and, in some cases, experimental surface measurements. The results indicate that the creation of free surfaces can promote twin propagation and growth and can influence twin morphology by causing a twin lamella to become larger, more blunted and irregular. The structure along the twin boundaries are also affected, due to the higher driving stresses that extend prismatic-basal and basal-prismatic facets. Furthermore, free surfaces invoke different slip activities in the twin and the surrounding parent crystal by enhancing basal, prismatic and pyramidal slip in some localized regions, while reducing slip in others. We demonstrate that the simulated free-surface effects lead to better qualitative and quantitative agreement with experimental measurements from scanning electron microscopy and digital image correlation.

36 MATERIALS SCIENCE↗

Ordered CoPt oxygen reduction catalyst with high performance and durability

A high-performance and durable polymer electrolyte membrane fuel cell cathode catalyst composed of an ordered L10–CoPt core and a thin Pt shell was designed and prepared. Under practical fuel cell membrane electrode assembly testing conditions, the cathode catalyst showed an outstanding initial mass activity of 0.6 A/mgPt, which satisfies the U.S. Department of Energy performance target while also meeting the durability target of less than 40% loss in mass activity after 30,000 accelerated stress test voltage cycles. The high structural stability of the L10–CoPt@Pt-shell catalyst was confirmed by postmortem materials characterization, and the origin of this robustness was revealed by density functional theory calculations, where the barriers for diffusion of Co atoms were observed to be significantly increased in the ordered intermetallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tensile Fracture of Welded Polymer Interfaces: Miscibility, Entanglements, and Crazing

Large-scale molecular simulations are performed to investigate tensile failure of polymer interfaces as a function of welding time t. Changes in the tensile stress, mode of failure and interfacial fracture energy G I are correlated to changes in the interfacial entanglements as determined from Primitive Path Analysis. Bulk polymers fail through craze formation, followed by craze breakdown through chain scission. At small t welded interfaces are not strong enough to support craze formation and fail at small strains through chain pullout at the interface. Once chains have formed an average of about one entanglement across the interface, a stable craze is formed throughout the sample. The failure stress of the craze rises with welding time and the mode of craze breakdown changes from chain pullout to chain scission as the interface approaches bulk strength. The interfacial fracture energy G I is calculated by coupling the simulation results to a continuum fracture mechanics model. As in experiment, G I increases as t 1/2 before saturating at the average bulk fracture energy G b . As in previous studies of shear strength, saturation coincides with the recovery of the bulk entanglement density. Before saturation, G I is proportional to the areal density of interfacial entanglements. Immiscibiltiy limits interdiffusion and thus suppresses entanglements at the interface. Even small degrees of immisciblity reduce interfacial entanglements enough that failure occurs by chain pullout and G I << G b .

36 MATERIALS SCIENCE↗

New distortional hardening model capable of predicting eight ears for textured aluminum sheet

The effects of the anisotropy evolution and of the directionality in hardening on the predictions of the earing profile of a strongly textured aluminum alloy are investigated using a new distortional hardening model that incorporates multiple hardening curves corresponding to uniaxial tension along several orientations with respect to the rolling direction, and to biaxial tension. Yielding is described using a form of CPB06ex2 yield function (Plunkett et al. (2008)) which is tailored for metals with no tension-compression asymmetry. It is shown that even if directional hardening and its evolution are neglected, this yield function predicts a cup with eight ears as was observed experimentally. However, directional hardening can be of considerable importance for improved accuracy in prediction of the non-uniformity of the cup height profile.

36 MATERIALS SCIENCE↗

Electronic states and photoluminescence of TiO{sub 2} nanotubes with adsorbed surface oxygen

The electronic states associated with enhanced photocatalytic activity of anodic anatase TiO{sub 2} nanotubes (NTs) annealed in N{sub 2} and O{sub 2} are investigated by photoluminescence (PL). The NTs annealed in N{sub 2} show a green peak related to oxygen vacancies and its position blueshifts with deceasing temperature, whereas those annealed in O{sub 2} show a double peak at 475-600 nm and the energy separation increases with decreasing temperature. Spectral analysis and density function theory calculation disclose that the double peak results from residual oxygen vacancies and oxygen atoms on the NT wall and the increased energy separation arises from the larger difference between the inner and outer NT stress at low temperature.

36 MATERIALS SCIENCE↗

Color Superconductivity and Charge Neutrality in Yukawa Theory

It is generally believed that when Cooper pairing occurs between two different species of fermions, their Fermi surfaces become locked together so that the resultant state remains “neutral,” with equal number densities of the two species, even when subjected to a chemical potential that couples to the difference in number densities. This belief is based on mean-field calculations in models with a zero-range interaction, where the anomalous self-energy is independent of energy and momentum. Following up on an early report of a deviation from neutrality in a Dyson-Schwinger calculation of color-flavor-locked quark matter, we investigate the neutrality of a two-species condensate using a Yukawa model which has a finite-range interaction. In a mean field calculation we obtain the full energy-momentum dependence of the self-energy and find that the energy dependence leads to a population imbalance in the Cooper-paired phase when it is stressed by a species-dependent chemical potential. This gives some support to the suggestion that the color-flavor-locked phase of quark matter might not be an insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling and Simulation of Deepwater Pipeline S-Lay With Coupled Dynamic Positioning

Dynamic position (DP) control and pipeline dynamics are the two main parts of the deepwater S-lay simulation model. In this study, a fully coupled analysis tool for deepwater S-lay deployment by dynamically positioned vessels is developed. The method integrates the major aspects related to numerical simulation, including coupled pipeline motion and roller contact forces. The roller–pipe interaction is incorporated in the S-lay pipeline model using a contact search method based on a lumped-mass (LM) formulation in global coordinates. A proportional-integration-differentiation (PID) controller and a Kalman filter are applied in the vessel motion equation to calculate the thrust allocation of the DP system in time domain. Numerical simulation results showed that the dynamic effects add a significant contribution to the tension, but have little influence on the maximum pipe stress and strain. The dynamic response of the coupled S-lay and DP pipeline deployment system increases the demand on the tensioner load carrying capability as well as the maximum DP thruster power.

Engineering↗

TU-G-BRA-08: BEST IN PHYSICS (JOINT IMAGING-THERAPY): Hybrid PET-MRI Imaging of Acute Radiation Induced Cardiac Toxicity

Purpose: To identify the presence of low-dose radiation induced cardiac toxicity in a canine model using hybrid positron emission tomography (PET) and magnetic resonance imaging (MRI). Methods: Research ethics board approval was obtained for a longitudinal imaging study of 5 canines after cardiac irradiation. Animals were imaged at baseline, 1 week post cardiac irradiation, and 1 month post cardiac irradiation using a hybrid PET- MRI system (Biograph mMR, Siemens Healthcare). The imaging protocol was designed to assess acute changes in myocardial perfusion and inflammation. Myocardial perfusion imaging was performed using N13-ammonia tracer followed by a dynamic PET acquisition scan. A compartmental tracer kinetic model was used for absolute perfusion quantification. Myocardial inflammation imaging was performed using F18-fluorodeoxyglucose (FDG) tracer. The standard uptake value (SUV) over a region encompassing the whole heart was used to compare FDG scans. All animals received a simulation CT scan (GE Medical Systems) for radiation treatment planning. Radiation treatment plans were created using the Pinncale3 treatment planning system (Philips Radiation Oncology Systems) and designed to resemble the typical cardiac exposure during left-sided breast cancer radiotherapy. Cardiac irradiations were performed in a single fraction using a TrueBeam linear accelerator (Varian Medical Systems). Results: The delivered dose (mean ± standard deviation) to heart was 1.8±0.2 Gy. Reductions in myocardial stress perfusion relative to baseline were observed in 2 of the 5 animals 1 month post radiation. A global inflammatory response 1 month post radiation was observed in 4 of the 5 animals. The calculated SUV at 1 month post radiation was significantly higher (p=0.05) than the baseline SUV. Conclusion: Low doses of cardiac irradiation (< 2 Gy) may lead to myocardial perfusion defects and a global inflammatory response that can be detectable as early as 1 month post irradiation using hybrid PET-MRI imaging techniques.

60 APPLIED LIFE SCIENCES↗

Nucleon matrix elements and baryon masses in the Dirac orbital model

Using the expansion of the baryon wave function in a series of products of single-quark bispinors (Dirac orbitals), the nonsinglet axial and tensor charges of a nucleon are calculated. The leading term yields g{sub A} = 1.27 in good agreement with experiment. Calculation is essentially parameter-free and depends only on the strong coupling constant value {alpha}{sub s}. The importance of lower Dirac bispinor component, yielding 18% to the wave-function normalization is stressed. As a check, the baryon decupletmasses in the formalism of this model are also computed using standard values of the string tension {sigma} and the strangequark mass m{sub s}; the results being in a good agreement with experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Challenge Problem 1: Preliminary Model Development and Assessment of Flexible Heat Transfer Modeling Approaches

This report presents the modeling progress of a university consortium studying flexible modeling for turbulent heat transfer. In the context of advanced nuclear reactor design, where challenges include non-unity Prandtl fluids, free and mixed convection, and transitional flow, computational fluid dynamics methods are underutilized due to low confidence in modeling approaches and high computational cost. This report evaluates the performance of engineering CFD models in diabatic, buoyant turbulent flow. It finds that all turbulence models including several variants of the k-ε and k-ω models struggle to predict accurate turbulent momentum and heat transfer in such flows. The Nusselt numbers have been compared between the models and the DNS data, where calculations have been performed for each case and trends have shown a good agreement between DNS estimated Nusselt numbers and available correlations as well as experimental data. A novel DNS correlation for high Pr cases as they are transitioning from mixed convection to natural convection has been proposed. While Nusselt number errors relative to DNS range from 20% to 50%, the models capture similar trends to DNS with respect to Nusselt suppression and amplification under varying levels of buoyancy effect. This report also highlights model form error as a significant contributor to CFD predictions and proposes a framework for quantifying model error and improving confidence in CFD calculations. To improve the predictive capability of engineering CFD models, data-driven approaches for turbulence models are investigated. Theoretical frameworks based on the invariant tensor / vector basis neural networks for prediction of Reynolds stresses and turbulent heat fluxes are employed. The models are developed using direct numerical simulations data for forced convection flows of different fluids in vertical planar channel domain. The framework is implemented in spectral element solvers Nek5000 / nekRS and has shown a potential for future development and consideration of mixed convection flows.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modeling of the Indentation of Fiber Reinforced Materials Using Spherical Indenters

Following the enormous development of the technology there is a great need for complex engineering materials to be studied in multilayered films at the nano-level. Careful modeling of the structure of engineering materials, using finite element analysis may reveal specific behavior of the component materials and the filling materials, such as mortars, which are the important boundaries of all the engineering materials. The instruments used for experiments are expensive and their utilization is hindered by many unexpected factors. With the help of computer programs it is possible to achieve virtual nanoindentation, a widely known non-destructive method. It is easy to model structures in whatever shape or dimensions we wish, with one or more layers and with linear or nonlinear materials in order to obtain stress, strain, displacement curves, study microhardness, etc. The purpose of this paper is to model the nanoindentation process for fiber-reinforced concrete and to study the mechanical properties as a function of the distance of a particular fibre.

36 MATERIALS SCIENCE↗

Final Report for Department of Energy grant DE-FG02-91ER45455, "Theoretical Study of Reactions at the Electrode-Electrolyte Interface"

In this project, reaction rates were predicted by numerical methods, in a collaboration with Argonne National Laboratory . Emphasis is on electron transfer and transport involving ions known to be important in enhancing stress corrosion cracking in light water reactors and on electron transfer at oxide surfaces. In the latter part of the grant period we placed increased emphasis on development and use of self consistent tight binding methods for this kind of study. We showed that by careful fitting of results from first principles plane wave calculations,we could model surfaces and interfaces oxides and metals using these methods. We obtained results for the titanium/titanium oxide interface in this way and completed a model of the ruthenium dioxide surface using our innovative self consistent tight binding molecular dynamics methods. We completed development of a description of liquid water within the self consistent tight binding context and studied the rutile water 110 interface to determine if it is hydroxylated. A self consistent tight binding study of titanium metal surfaces demonstrated the usefulness of this method for metals. In collaboration with the Argonne group, we extended the tight binding calculations on rutile titania to the anatase form and made the first calculations of the relative stability of anatase and rutile as a function of crystallite size. We completed studies of small anatase particles in water using the method and found significant distortions of nanoparticle crystallite shapes as a consequence of interactions with the water.

36 MATERIALS SCIENCE↗

A resonant sensor composed of quartz double ended tuning fork and silicon substrate for digital acceleration measurement

Presented in this paper is a micro-resonant acceleration sensor based on the frequency shift of quartz double ended tuning fork (DETF). The structure is silicon substrate having a proof mass supported by two parallel flexure hinges as doubly sustained cantilever, with a resonating DETF located between the hinges. The acceleration normal to the chip plane induces an axial stress in the DETF beam and, in turn, a proportional shift in the beam resonant frequency. Substrate is manufactured by single-crystal silicon for stable mechanical properties and batch-fabrication processes. Electrodes on the four surfaces of DETF beam excite anti-phase vibration model, to balance inner stress and torque and imply a high quality factor. The sensor is simply packaged and operates unsealed in atmosphere for measurements. The tested natural frequency is 36.9 kHz and the sensitivity is 21 Hz/g on a nominally ±100 g device, which is in good agreement with analytical calculation and finite element simulation. The output frequency drifting is less than 0.5 Hz (0.0014% of steady output) within 1 h. The nonlinearity is 0.0019%FS and hysteresis is 0.0026%FS. The testing results confirm the feasibility of combining quartz DETF and silicon substrate to achieve a micro-resonant sensor based on simple processing for digital acceleration measurements.

36 MATERIALS SCIENCE↗