Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CYCLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Impacts of Degradation on Water, Energy, and Carbon Cycling of the Amazon Tropical Forests

Selective logging, fragmentation, and understory fires directly degrade forest structure and composition. However, studies addressing the effects of forest degradation on carbon, water, and energy cycles are scarce. Here, we integrate field observations and high-resolution remote sensing from airborne lidar to provide realistic initial conditions to the Ecosystem Demography Model (ED-2.2) and investigate how disturbances from forest degradation affect gross primary production (GPP), evapotranspiration (ET), and sensible heat flux (H). We used forest structural information retrieved from airborne lidar samples (13,500 ha) and calibrated with 817 inventory plots (0.25 ha) across precipitation and degradation gradients in the eastern Amazon as initial conditions to ED-2.2 model. Our results show that the magnitude and seasonality of fluxes were modulated by changes in forest structure caused by degradation. During the dry season and under typical conditions, severely degraded forests (biomass loss ≥66%) experienced water stress with declines in ET (up to 34%) and GPP (up to 35%) and increases of H (up to 43%) and daily mean ground temperatures (up to 6.5°C) relative to intact forests. In contrast, the relative impact of forest degradation on energy, water, and carbon cycles markedly diminishes under extreme, multiyear droughts, as a consequence of severe stress experienced by intact forests. Our results highlight that the water and energy cycles in the Amazon are driven by not only climate and deforestation but also the past disturbance and changes of forest structure from degradation, suggesting a much broader influence of human land use activities on the tropical ecosystems.

54 ENVIRONMENTAL SCIENCES↗

A mechanistic damage model for solid oxide fuel cell ceramic materials - Part I: Constitutive modeling

A multiscale mechanistic damage model for solid oxide fuel cell (SOFC) ceramics that combines micromechanics of stiffness reduction due to material porosity change and microcracking with a continuum damage mechanics (CDM) description for the evolution of microcracks up to fracture is developed in this work. The model also accounts for volumetric swelling of the anode due to redox cycling. Porosity change and swelling during redox combined with normal operating thermomechanical loads could increase the stress, strain and damage distributions in SOFC stacks leading them to failure. The proposed model involves three governing parameters: (i) the porosity in terms of the pore or void volume fraction, (ii) material swelling magnitude prescribed at a given loading step, and (iii) the damage variable that describes microcracking caused by thermomechanical loads and swelling. Pores and microcracks in the ceramics are modeled as randomly distributed ellipsoidal inclusions with negligible stiffness by an Eshelby-Mori-Tanaka formulation combined with an inclusion orientation distribution method. Microcracking damage evolution is described by a CDM formulation. Volumetric swelling is treated in a similar way to thermal expansion in the constitutive relations. After validation and numerical checks, the damage model is used to analyze a simplified SOFC positive-electrode/electrolyte/negative-electrode (PEN) structure subjected a redox cycle in addition to thermomechanical loads experienced during normal operation of a SOFC stack.

30 DIRECT ENERGY CONVERSION↗

Deconstructing the Soil Microbiome into Reduced-Complexity Functional Modules

The soil microbiome is an invaluable component of the biosphere and critical for ecosystem functions, including biogeochemical cycling, soil-atmosphere gas exchange, degradation of toxic compounds, and promotion of plant growth and stress resistance/resilience. An improved understanding of the soil microbiome will help with predicting how these processes respond to external perturbations, and with harnessing beneficial aspects of the soil microbiome for agronomic applications such as crop amendments. However, the extensive taxonomic and functional diversity inherent within the soil microbiome hinders efficient analysis of this system. Microbial biodiversity in soils is orders of magnitude greater than other commonly studied systems such as the human gut microbiome (Blum, Zechmeister-Boltenstern, and Keiblinger 2019; Berendsen, Pieterse, and Bakker 2012). Thousands of microbial taxa may be found in a single gram of soil (Roesch et al. 2007), and high rates of gene flow and mutation further promote microbial diversification (Sergaki et al. 2018). Concomitantly, functional diversity in soil is similarly extensive. Soil is a heterogeneous mixture of microenvironments with defined physical and chemical attributes (Bach et al. 2018), within which numerous microbial guilds of distinct life-strategies and metabolic capacities can be found (Perez-Garcia, Lear, and Singhal 2016; H.-S. Song et al. 2014). Furthermore, the soil microbiome harbors a significant fraction of rare and/or quiescent members (Blagodatskaya and Kuzyakov 2013) that exist below the threshold of detection of current technologies. Such rare taxa may make significant contributions to process rates (Shade and Gilbert 2015; Dawson et al. 2017), but their scarcity complicates their identification and analysis. Finally, the vast amounts of information generated through holistic analyses of soil communities represent an intense computational burden (Scholz, Lo, and Chain 2012; Prosser 2015) that precludes assessment of the complete functional and taxonomic diversity contained in this ecosystem.

Naylor, Dan T.↗

High performance anode for advanced Li batteries

The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.

25 ENERGY STORAGE↗

Characterising the polymorphic phase transformation at a localised point on a Cu6Sn5 grain

Highlights: • A single-targeted Cu{sub 6}Sn{sub 5} grain adjacent to Sn-rich sites and Cu{sub 3}Sn was investigated using HVTEM. • Phase transformation from hexagonal to monoclinic in a single-targeted Cu{sub 6}Sn{sub 5} grains. • A time-temperature transformation (TTT) diagram was constructed using the HVTEM results. - Abstract: Cu{sub 6}Sn{sub 5} is an important intermetallic for electric interconnects and anode material of Li-ion batteries, with a polymorphic transformation from hexagonal eta-Cu{sub 6}Sn{sub 5} at temperatures higher than 186 °C to monoclinic eta′-Cu{sub 6}Sn{sub 5} at lower temperatures. The polymorphic transformation of Cu{sub 6}Sn{sub 5} has the potential to generate internal stresses in soldered joints during both the soldering process and subsequent device operation involving thermal cycling. Here we developed a systematic method to characterise the polymorphic transformations at localised points in a single grain of Cu{sub 6}Sn{sub 5} that is in intimate contact with adjacent Sn rich and Cu{sub 3}Sn phases to establish a time–temperature transformation (TTT) diagram of the eta to eta′-Cu{sub 6}Sn{sub 5} transformation. The method involves in situ temperature-controlled high-voltage transmission electron microscopy (HVTEM) of a single-targeted Cu{sub 6}Sn{sub 5} grain with observation of diffraction patterns during multiple heating and cooling experiments on a 0.5 μm thick sample made by focused ion beam milling (FIB). The results are compared to previously reported powder X-ray diffraction data. It is concluded that there is good agreement between both techniques and the transformations observed in the powder are representative of those in individual grains present in polycrystalline structures. Based on the newly developed TTT, it was established that the high-temperature eta-Cu{sub 6}Sn{sub 5} could be stablised down to room temperature if the cooling rate exceeded 20 °C min{sup −1}.

36 MATERIALS SCIENCE↗

Rod internal pressure quantification and distribution analysis using Frapcon

This report documents work performed supporting the Department of Energy (DOE) Office of Nuclear Energy (NE) Fuel Cycle Technologies Used Fuel Disposition Campaign (UFDC) under work breakdown structure element 1.02.08.10, ST Analysis. In particular, this report fulfills the M4 milestone M4FT- 15OR0810036, Quantify effects of power uncertainty on fuel assembly characteristics, within work package FT-15OR081003 ST Analysis-ORNL. This research was also supported by the Consortium for Advanced Simulation of Light Water Reactors (http://www.casl.gov), an Energy Innovation Hub (http://www.energy.gov/hubs) for Modeling and Simulation of Nuclear Reactors under U.S. Department of Energy Contract No. DE-AC05-00OR22725. The discharge rod internal pressure (RIP) and cladding hoop stress (CHS) distributions are quantified for Watts Bar Nuclear Unit 1 (WBN1) fuel rods by modeling core cycle design data, operation data (including modeling significant trips and downpowers), and as-built fuel enrichments and densities of each fuel rod in FRAPCON-3.5. A methodology is developed which tracks inter-cycle assembly movements and assembly batch fabrication information to build individual FRAPCON inputs for each evaluated WBN1 fuel rod. An alternate model for the amount of helium released from the zirconium diboride (ZrB2) integral fuel burnable absorber (IFBA) layer is derived and applied to FRAPCON output data to quantify the RIP and CHS for these types of fuel rods. SCALE/Polaris is used to quantify fuel rodspecific spectral quantities and the amount of gaseous fission products produced in the fuel for use in FRAPCON inputs. Fuel rods with ZrB2 IFBA layers (i.e., IFBA rods) are determined to have RIP predictions that are elevated when compared to fuel rod without IFBA layers (i.e., standard rods) despite the fact that IFBA rods often have reduced fill pressures and annular fuel pellets. The primary contributor to elevated RIP predictions at burnups less than and greater than 30 GWd/MTU is determined to be the total fuel rod void volume and the amount of released fission gas in the fuel rod, respectively. Cumulative distribution functions (CDFs) are prepared from the distribution of RIP and CHS predictions for all standard and IFBA rods. The provided CDFs allow for the determination of the portion of WBN1 fuel rods that exceed a specified RIP or CHS limit. Results are separated into IFBA and standard rods so that the two groups may be analyzed individually. FRAPCON results are provided in sufficient detail to enable the recalculation of the RIP while considering any desired plenum gas temperature, total void volume, or total amount of gas present in the void volume. A method to predict the CHS from a determined or assumed RIP is also proposed, which is based on the approximately linear relationship between the CHS and the RIP. Finally, improvements to the computational methodology of FRAPCON are proposed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Future Response of Coastal Wetlands to Environmental Stresses: Algorithm Comparison of Numerical Models

Coastal wetlands are a critical component of the earth system that strongly influence the global water and biogeochemical cycles. They are also likely important sentinel of climate change. Because eco-geomorphological processes have long been recognized to be important for coastal wetland survival under accelerated sea-level rise (SLR), many eco-geomorphology models have been developed to assess the impact of climate change on coastal wetlands. Although these models differ substantially in complexity and numerical methods, few studies have investigated the algorithm-level uncertainties in these models. In this study, we developed a multiple-algorithm model framework of coastal wetlands that represents coastal hydrodynamics (such as water level, significant wave height and bottom shear stress) and four eco-geomorphological processes: mineral accretion, organic matter accretion, storm surge erosion and landward migration. We validated the model at three representative coastal wetland sites (Venice Lagoon, Plum Island Estuary and Hunter Estuary) for hydrodynamics, mineral accretion and organic matter accretion. Through model-data comparison, we showed that the model can well capture the dynamics of hydrodynamical and eco-geomorphological conditions in the study sites. Importantly, analysis of the multiple-algorithm simulations suggests that differences in the process representation of mineral and organic matter accretion may contribute to the recent contradicting predictions of coastal wetland evolution under accelerated SLR.

54 ENVIRONMENTAL SCIENCES↗

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

In-situ neutron diffraction during cyclic tension-compression loading (∼+3.5% to −2.8%) of a 17Mn-3Al-2Si-1Ni-0.06C steel that exhibits concurrent transformation and twinning -induced plasticity effects indicated a significant contribution of intragranular back stresses to the observed Bauschinger effect. Rietveld analysis revealed a higher rate of martensitic transformation during tension compared to compression. Throughout cycling, α′-martensite exhibited the highest phase strains such that it bears an increasing portion of the macroscopic load as its weight fraction evolves. On the other hand, the ε-martensite strain remained compressive as it accommodated most of the internal strains caused by the shape misfit associated with the γ→ε and/or ε→α′ transformations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanics of Granular Materials (MGM) Microgravity Experiment

The second series of MGM experiment was conducted during the STS-89 mission in January 1998. The experiment was previously flow on Atlantis's STS-79 mission in September 1996. Six displacement-controlled, drained triaxial compression experiments were performed at very low effective confining stresses. The confining stresses were in the ranges 0.05, 0.52 and 1.30 kPa. Three experiments were subjected to monotonic loading and unloading cycles while the other three experiments were subjected to cyclic loading. The results show very high peak strength friction angles in the range of 47.6 to 70.0 degrees, which are mainly due to overconsolidation and grain interlocking effects. It was observed that the residual strength levels in the monotonic loading experiments were in the same range as that observed at higher confining stress levels. The dilatancy angles were unusually high in the range of 30 to 31 degrees. All specimens display substantial initial stiffnesses and elastic moduli during unloading and reloading events, which are nearly an order of magnitude higher than conventional theories predict. A periodic instability phenomenon which appears to result from buckling of multiple internal arches and columnar systems, augmented by stick-slips was observed in the experiments. Computed Tomography (CT) measurements revealed valuable data about the internal fabric and the specimens deformation patterns. Uniform diffuse bifurcation with multiple radial shear bands was observed in the specimens tested in a microgravity environment. In the axial direction, two major conical surfaces were developed. Spatial nonsymmetrical deformations were observed in specimens tested in terrestrial laboratory.

Alshibli, Khalid A.↗

An in-situ study of low thermal expansion and internal stress evolution in FeMn alloys

The mechanism of low thermal expansion phenomenon in antiferromagnetic FeMn alloys needs to be revealed. In this work, the evolution of lattice thermal expansion and internal stress in FeMn alloys was investigated by in-situ synchrotron X-ray diffraction during thermal cycling. Preceding the martensitic transformation, the coefficient of lattice thermal expansion (CLTE) decreased and the full width at half maximum (FWHM) of the diffraction peaks broadened abnormally. The evolution of the lattice thermal expansion and the FWHM were both reversible and isotropic. The additional reflection spots around the fundamental diffraction spots in the electron diffraction patterns of austenite and the dispersed nano-scale martensite embryos in austenite observed in the dark field TEM images proves the existence of premartensitic transformation. Finally, similar phenomena were found in FeMn Invar alloy, which indicate that the Invar effect is closely related to the internal stress evolution caused by premartensitic transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ETP-0492, Measured Residual Stresses in CYL S/N 53 Fretted Area

This test report presents the results of a residual stress survey of the inner clevis leg of lightweight cylinder SIN 053 as described by ETP-0492. The intent of this testing was to evaluate the residual stresses that occur in and around the inner clevis leg at the capture feature contact zone during a normal flight cycle. Lightweight case cylinder segment IU50717, S/N L053 from Flight STS-27 exhibited fretting around the contact zone of the inner clevis leg and the capture feature of the field joint. Post flight inspection revealed several large fitting pits on the inside of the inner clevis leg. This cylinder was assigned for both residual stress and metallurgical evaluation. This report is concerned only with the residual so= evaluations. The effects of glass bead cleaning and fi=ing were evaluated using the x-ray diffraction method.

Webster, Ronald L.↗

Tensile Behavior and High-Cycle Fatigue Durability of a SiC/SiC Ceramic-Matrix Composite Without and With Simulated Cooling Holes

High-cycle fatigue (HCF) behavior of a melt-infiltrated, prepreg SiC/SiC composite was investigated using specimens without and with simulated cooling holes at 816 and 1,316 °C. The ceramic-matrix composite (CMC) material used for this study was fabricated by GE Aviation and had a ply configuration of [0/90/0] 3 . HCF tests were conducted with an R-ratio of 0.6 and a cyclic frequency of 30 Hz. Maximum tensile gross-section stresses used in the HCF tests ranged from 152 to 359 MPa. Runout in HCF was defined as 30 million cycles (278 h) at both temperatures. Monotonic tensile tests were conducted at room temperature (RT) on as-received CMC specimens and on HCF runout specimens without and with holes to determine residual tensile strengths. Digital image correlation (DIC) and acoustic emission (AE) techniques were used to monitor progression of damage in RT tensile tests on specimens without and with holes. Fractography was performed on a limited number of specimens without and with holes to determine morphology of fracture surfaces. Representative RT stress-strain behavior, elevated temperature HCF behavior at the two temperatures, and RT residual tensile strengths of HCF runout specimens are documented in this report. Select examples of DIC and AE data from RT tensile tests on specimens without and with holes and typical features observed on fracture surfaces of specimens tested under tensile and HCF conditions are also discussed.

Ceramic matrix composite↗

ORNL Interim Progress Report on Hydride Reorientation CIRFT Tests

A systematic study of H. B. Robinson (HBR) high burnup spent nuclear fuel (SNF) vibration integrity was performed in Phase I project under simulated transportation environments, using the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) hot cell testing technology developed at Oak Ridge National Laboratory in 2013–14. The data analysis on the as-irradiated HBR SNF rods demonstrated that the load amplitude is the dominant factor that controls the fatigue life of bending rods. However, previous studies have shown that the hydrogen content and hydride morphology has an important effect on zirconium alloy mechanical properties. To address the effect of radial hydrides in SNF rods, in Phase II a test procedure was developed to simulate the effects of elevated temperatures, pressures, and stresses during transfer-drying operations. Pressurized and sealed fuel segments were heated to the target temperature for a preset hold time and slow-cooled at a controlled rate. The procedure was applied to both non-irradiated/prehydrided and high-burnup Zircaloy-4 fueled cladding segments using the Nuclear Regulatory Commission-recommended 400°C maximum temperature limit at various cooling rates. Before testing high-burnup cladding, four out-of-cell tests were conducted to optimize the hydride reorientation (R) test condition with pre-hydride Zircaloy-4 cladding, which has the same geometry as the high burnup fuel samples. Test HR-HBR#1 was conducted at the maximum hoop stress of 145 MPa, at a 400°C maximum temperature and a 5°C/h cooling rate. On the other hand, thermal cycling was performed for tests HR-HBR#2, HR-HBR#3, and HR-HBR#4 to generate more radial hydrides. It is clear that thermal cycling increases the ratio of the radial hydride to circumferential hydrides. The internal pressure also has a significant effect on the radial hydride morphology. This report describes a procedure and experimental results of the four out-of-cell hydride reorientation tests of hydrided Zircaloy-4 cladding, which served as a guideline to prepare in-cell hydride reorientation samples with high burnup HBR fuel segments. This report also provides the Phase II CIRFT test data for the hydride reorientation irradiated samples. The variations in fatigue life are provided in terms of moment, equivalent stress, curvature, and equivalent strain for the tested SNFs. The CIRFT results appear to indicate that hydride reoriented treatment (HRT) have a negative effect on fatigue life, in addition to hydride reorientation effect. For HR4 specimen that had no pressurization procedure applied, the thermal annealing treatment alone showed a negative impact on the fatigue life compared to the HBR rod.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural Effects on Creep-Fatigue Life of Alloy 709

Creep-fatigue tests were performed on plates of Alloy 709 from various heats and processing conditions, but often with inhomogeneous microstructures. After testing, metallographic analysis was performed and the specimens were generally found to either have a uniform grain size or a bimodal grain size distribution with either isolated or groups (bands) of large grains. Creep-fatigue life was characterized with respect to the length of the grain boundary perpendicular to the stress axis, and it was found that large grains (>400 μm) tended to be detrimental to creep-fatigue life, with the exception of elongated (parallel to the stress axis) grains and some specimens that underwent additional annealing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implications of Fatigue-Crack Healing in Nanocrystalline Metals [Slides]

Under high-cycle fatigue conditions, a fatigue crack in nanocrystalline Pt was observed to undergo healing. The healing appears to occur by cold welding, facilitated by grain boundary migration, and also by local closure stresses. The healing may help explain several observations: role of air (or vacuum) on fatigue life, impeded subsurface fatigue cracking, apparent flaw healing in sub-critical cycling of ceramics, the existence of a fatigue threshold, and the role of vacuum on the fatigue threshold.

36 MATERIALS SCIENCE↗

Sister Rod Destructive Examinations (FY23) Appendix F: Cyclic Integrated Reversible-Bending Fatigue Tests

Spent nuclear fuel (SNF) assemblies must be shipped to other sites for processing and disposal. During shipment, the fuel is typically oriented horizontally, and the fuel rods are subject to periodic alternating loads related to the movement of the vehicle that results in alternating bending of the SNF fuel rods. The number of bending cycles is related to the length of the shipping route, with longer routes producing more cycles. Because it is well-known that cyclic loads can produce failures, even when the stress and strain imposed are below the material’s yield point, investigation of the SNF’s fatigue behavior is prudent. This report discusses the results of fatigue testing conducted at Oak Ridge National Laboratory (ORNL) using the Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) created by the US Department of Energy Office of Nuclear Energy for the High Burnup Spent Fuel Data Project and its sister rods. The results of the tests are compared with results obtained over the last decade using the same CIRFT for the US Nuclear Regulatory Commission (NRC).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lamination residual strains and stresses in hybrid laminates

An investigation is conducted of the effects of hybridization on the magnitude of lamination residual stresses. Eight-ply graphite/Kevlar 49/epoxy and graphite/S-glass/epoxy laminates were studied. The same matrix resin was selected for all basic materials to ensure compatibility and uniform curing of the various plies. The specimens, with inserted strain gages and thermocouples, were subjected to curing and postcuring cycles in an autoclave. Subsequently, the specimens were subjected to a thermal cycle from room temperature to 444 K and down to room temperature. It was found that hydridizing reduces apparently residual strains and stresses in the graphite plies. However, these strains were not affected much by the type and degree of hybridization.

Daniel, I. M.↗