Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical Physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Load response of a floating wind turbine to turbulent atmospheric flow

The two turbulence-generation models [Kaimal Spectrum Exponential Coherence (KSEC) and Mann] specified in the international standard for wind turbine design assume neutral atmospheric conditions and are based on statistical and spectral methods. Mainly due to the lack of physics, the flow fields simulated with these models ultimately differ in their underlying structure, especially in terms of the spatial coherence of longitudinal velocity perturbations. While this may not be critical for smaller wind turbine rotors, it becomes important when rotor sizes increase. Furthermore, it might be especially important in the context of floating technologies as they are more sensitive to large turbulent coherent structures. Previous work found that these differences between KSEC and Mann can propagate to loads predictions and thereby affect the design space of the entire wind turbine system. It is therefore crucial to determine in which ways these two models are underperforming. Up until now, validation of these models had only been done in the vertical direction because it is extremely difficult to obtain atmospheric turbulence measurements separated laterally, and sampled at heights relevant to wind energy. In this work, we address the lack of measurements by using high-fidelity, high-resolution simulation data as a reference. We perform hour-long, large-eddy simulations of turbulent velocity fields that are stability-dependent and contain three-dimensional coherent structures. These flow fields are then used to investigate which stochastic model is a better predictor of loads on a realistic spar-system floating offshore wind turbine, and to quantify how the assumption of neutral stratification propagates to short-term load estimates. Both stochastic turbulence models are found to overpredict fatigue loading in high-wind scenarios (in some cases, by more than 25%) and underpredict it when the wind speed is low (by as much as 20%). The KSEC model matches the high-fidelity flow fields more closely than Mann at high wind speeds, and the opposite is true at low wind speeds. Finally, turbine loading is found to be sensitive to atmospheric stability even when the turbulence intensity remains fairly constant. This sensitivity is most pronounced at low wind speeds, when fatigue load estimates on the spar system can differ by 40%.

17 WIND ENERGY↗

Machine vision based particle size and size distribution determination of airborne dust particles of wood and bark pellets

Dust management strategies in industrial environment, especially of airborne dust, require quantification and measurement of size and size distribution of the particles. Advanced specialized instruments that measure airborne particle size and size distribution apply indirect methods that involve light scattering, acoustic spectroscopy, and laser diffraction. In this research, we propose a simple and direct method of airborne dust particle dimensional measurement and size distribution analysis using machine vision. The method involves development of a user-coded ImageJ plugin that measures particle length and width and analyzes size distribution of particles based on particle length from high-resolution scan images. Test materials were airborne dust from soft pine wood sawdust pellets and ground pine tree bark pellets. Subsamples prepared by dividing the actual dust using 230 mesh (63 m) sieve were analyzed as well. A flatbed document scanner acquired the digital images of the dust particles. Proper sampling, layout of dust particles in singulated arrangement, good contrast smooth background, high resolution images, and accurate algorithm are essential for reliable analysis. A halo effect around grey-scale images ensured correct threshold limits. The measurement algorithm used Feret s diameter for particle length and pixel-march technique for particle width. Particle size distribution was analyzed in a sieveless manner after grouping particles according to their distinct lengths, and several significant dimensions and parameters of particle size distribution were evaluated. Results of the measurement and analysis were presented in textual and graphical formats. The developed plugin was evaluated to have a dimension measurement accuracy in excess of 98.9% and a computer speed of analysis of <8 s/image. Arithmetic mean length of actual wood and bark pellets airborne dust particles were 0.1138 0.0123 and 0.1181 0.0149 mm, respectively. The airborne dust particles of wood and bark pellets can be described as non uniform, finer particles dominated, very finely skewed with positive skewness, leptokurtic, and very well sorted category. Experimental mechanical sieving and machine vision methods produced comparable particle size distribution. The limitations and merits of using the machine vision technique for the measurement of size and size distribution of fine particles such as airborne dust were discussed.

09 BIOMASS FUELS↗

Cloud properties derived from two lidars over the ARM SGP site

[1] Active remote sensors such as lidars or radars can be used with other data to quantify the cloud properties at regional scale and at global scale (Dupont et al., 2009). Relative to radar, lidar remote sensing is sensitive to very thin and high clouds but has a significant limitation due to signal attenuation in the ability to precisely quantify the properties of clouds with a 20 cloud optical thickness larger than 3. In this study, 10-years of backscatter lidar signal data are analysed by a unique algorithm called STRucture of ATmosphere (STRAT, Morille et al., 2007). We apply the STRAT algorithm to data from both the collocated Micropulse lidar (MPL) and a Raman lidar (RL) at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site between 1998 and 2009. Raw backscatter lidar signal is processed and 25 corrections for detector deadtime, afterpulse, and overlap are applied. (Campbell et al.) The cloud properties for all levels of clouds are derived and distributions of cloud base height (CBH), top height (CTH), physical cloud thickness (CT), and optical thickness (COT) from local statistics are compared. The goal of this study is (1) to establish a climatology of macrophysical and optical properties for all levels of clouds observed over the ARM SGP site 30 and (2) to estimate the discrepancies induced by the two remote sensing systems (pulse energy, sampling, resolution, etc.). Our first results tend to show that the MPLs, which are the primary ARM lidars, have a distinctly limited range where all of these cloud properties are detectable, especially cloud top and cloud thickness, but even actual cloud base especially during summer daytime period. According to the comparisons between RL and MPL, almost 50% of situations show a signal to noise ratio too low (smaller than 3) for the MPL in order to detect clouds higher than 7km during daytime period in summer. Consequently, the MPLderived annual cycle of cirrus cloud base (top) altitude is biased low, especially for daylight periods, compared with those derived from the RL data, which detects 5 cloud base ranging from 7.5 km in winter to 9.5 km in summer (and tops ranging from 8.6 to 10.5 km). The optically thickest cirrus clouds (COT>0.3) reach 50% of the total population for the Raman lidar and only 20% for the Micropulse lidar due to the difference of pulse energy and the effect of solar irradiance contamination. A complementary study using the cloud fraction 10 derived from the Micropulse lidar for clouds below 5 km and from the Raman lidar for cloud above 5 km allows for better estimation of the total cloud fraction between the ground and the top of the atmosphere. This study presents the diurnal cycle of cloud fraction for each season in comparisons with the Long et al. (2006) cloud fraction calculation derived from radiative flux analysis.

54 ENVIRONMENTAL SCIENCES↗

Emission from quantum-dot high-β microcavities: transition from spontaneous emission to lasing and the effects of superradiant emitter coupling

Measured and calculated results are presented for the emission properties of a new class of emitters operating in the cavity quantum electrodynamics regime. The structures are based on high-finesse GaAs/AlAs micropillar cavities, each with an active medium consisting of a layer of InGaAs quantum dots (QDs) and the distinguishing feature of having a substantial fraction of spontaneous emission channeled into one cavity mode (high β-factor). This paper demonstrates that the usual criterion for lasing with a conventional (low β-factor) cavity, that is, a sharp non-linearity in the input–output curve accompanied by noticeable linewidth narrowing, has to be reinforced by the equal-time second-order photon autocorrelation function to confirm lasing. The article also shows that the equal-time second-order photon autocorrelation function is useful for recognizing superradiance, a manifestation of the correlations possible in high-β microcavities operating with QDs. In terms of consolidating the collected data and identifying the physics underlying laser action, both theory and experiment suggest a sole dependence on intracavity photon number. Evidence for this assertion comes from all our measured and calculated data on emission coherence and fluctuation, for devices ranging from light-emitting diodes (LEDs) and cavity-enhanced LEDs to lasers, lying on the same two curves: one for linewidth narrowing versus intracavity photon number and the other for g( 2 )(0) versus intracavity photon number.

36 MATERIALS SCIENCE↗

Active site design enables industrial scale H 2 O 2 electrosynthesis with metal-free catalysts

The electrosynthesis of hydrogen peroxide (H 2 O 2 ) via a two-electron oxygen reduction reaction enables decentralized H 2 O 2 production. While metal-free carbon catalysts are sustainable and low-cost, their performance is hindered by poorly defined active sites and uncontrolled defect states. Here, we resolve these challenges through active site design and catalyst screening using fluorine (F) and nitrogen (N) codoped carbons as model materials. Statistical analysis combined with density functional theoretical calculations reveals that F-induced structural modification and defect passivation optimize OOH* binding, with F-doping and adjacent F atoms predominantly lowering abs ΔG(OOH*). Experimental results confirm that semi-ionic C–F bonds passivate defects in nitrogen-doped carbon, enhancing catalytic activity and durability. The resulting (N, F)-codoped carbon achieves nearly 100% H 2 O 2 selectivity at 0.5–0.65 V versus the reversible hydrogen electrode and maintains > 95% across 0.01–0.65 V versus the reversible hydrogen electrode. In an electrolyzer, (N, F)-codoped carbon exhibits an H 2 O 2 yield rate of 74.35 mol g cat. −1 h -1 and sustains 300 mA cm -2 for 105 hours with ~95% faradaic efficiency. Coupling the two-electron oxygen reduction reaction with methanol oxidation further reduces cell voltage and enhances productivity. This work provides a means to design efficient catalysts for industrial H 2 O 2 electrosynthesis.

H2O2 electrosynthesis↗

A novel method to construct stationary solutions of the Vlasov-Maxwell system

A novel method to derive stationary solutions of the Vlasov-Maxwell system is established. This method is based on the assumption that the deviation of the velocity distribution from the Maxwell-Boltzmann distribution can be expanded by the Hermite polynomials. By applying our method, a new two-dimensional equilibrium is derived, which may provide an initial setup for investigations of three-dimensional collisionless reconnection of magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear dust acoustic waves in a mixed nonthermal high energy-tail electron distribution

Large amplitude as well as weakly nonlinear dust acoustic waves in a mixed nonthermal high-energy-tail electron distribution are investigated. The effects of charge variation and electron deviation from Boltzmann distribution on the large amplitude dust acoustic soliton are then considered. The dust charge variation leads to an additional enlargement of the dust acoustic soliton, which is more pronounced as the electrons evolve far away from Maxwell-Boltzmann distribution. Under certain conditions, the dust charge fluctuation may provide an alternate physical mechanism causing anomalous dissipation, the strength of which becomes important and may prevail over that of dispersion as the suprathermal character of the plasma becomes important. The results complement and provide new insights into our previously published results on this problem [K. Aoutou, M. Tribeche, and T. H. Zerguini, Phys. Plasmas 15, 013702 (2008)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The influence of shape on the glassy dynamics of hard nonspherical particle fluids. I. Dynamic crossover and elasticity

We extend and apply the center-of-mass version of the microscopic naïve mode coupling theory to study the ideal kinetic glass transition of dense fluids and suspensions composed of broad families of one-, two-, and three- dimensional hard nonspherical particles. A kinetic arrest diagram is constructed which indicates a dynamical crossover or onset of activated barrier hopping controlled transport. We find (quasi-) one-dimensional rods and rings form ideal glasses at the lowest volume fractions which decrease strongly with aspect ratio. Two-dimensional disks form ideal glasses at intermediate volume fractions which decrease slowly with the number of particles comprising the planar objects. Compact three-dimensional cluster particles exhibit a subtle nonmonotonic variation of the onset volume fraction that depends on their detailed shape, surface corrugation, and intraparticle interstitial volume. A strong correlation between the ideal kinetic arrest volume fraction and dimensionless compressibility (amplitude of density fluctuations) is predicted. Here, the elastic shear modulus (transient localization length) grows (decreases) exponentially with volume fraction in a manner that becomes stronger as particle dimensionality increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonequilibrium Nonideal Nanoplasma Generated by a Fast Single Ion in Condensed Matter

A plasma model of relaxation of a medium in heavy ion tracks in condensed matter is proposed. The model is based on three assumptions: the Maxwell distribution of plasma electrons, localization of plasma inside the track nanochannel and constant values of the plasma electron density and temperature during the X-ray irradiation. It is demonstrated that the plasma relaxation model adequately describes the X-ray spectra observed upon interaction of a fast ion with condensed target. Preassumptions of plasma relaxation model are validated by the molecular dynamics modeling and simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of the electron energy distribution function in plasma on the Bohm criterion and on the drop voltage through the sheath: Case of microwave expanding plasma

This work is devoted to the study of the sheath expansion above a charged species collector immersed into the plasma in the general case of the electron energy distribution function (EEDF) (not necessarily a Boltzmann distributed function). In the first part, considering the general form of the electron kinetic energy distribution function (EEDF) in the plasma and assuming a one dimensional system, we propose an equation describing the limit value of the ion velocity at the sheath edge. Then, we extend this equation to the three dimensional problem. These results are discussed assuming Boltzmann distribution for the one dimensional system and Maxwell-Boltzmann distribution in the case of the three dimensional system. Both one and two temperature distributions are considered. Then, the method is applied to experimental results obtained in expanding microwave discharge sustained in argon. In the second part, we study the drop voltage through the sheath that is produced around a cylindrical collector biased at the floating potential. A theoretical model is given, and results are compared with experimental values measured by means of a cylindrical Langmuir probe immersed in microwave expanding plasma. The model agrees with experiments and points out the role of the EEDF profile on the ion velocity at the sheath edge and, consequently, on the drop voltage through the sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Three-dimensional simulations of ion dynamics in an Electron Cyclotron Resonance Ion Source

We present a three-dimensional simulation of the ion dynamics in an electron cyclotron resonance ion source. Ion trajectories in the min-B field of the source are calculated taking ion-ion and electron-ion collisions into account. The electrons are not tracked but considered as a neutralizing background with a Maxwell-Boltzmann velocity distribution. Some applications of the code are discussed, e.g., the calculated charge-state and phase-space distributions of extracted ion beams and the ionization dynamics in the plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time profile of ion pulses produced in a hot-cavity laser ion source

The time spreads of Mn ions produced by three-photon resonant ionization in a hot-cavity laser ion source are measured. A one-dimensional ion-transport model is developed to simulate the observed ion time structures. Assuming ions are generated with a Maxwellian velocity distribution and are guided by an axial electric field, the predictions of the model agree reasonably well with the experimental data and suggest that the ions are radially confined in the ion source and a substantial fraction of the ions in the transport tube are extracted.

43 PARTICLE ACCELERATORS↗

Adaptive {delta}f Monte Carlo Method for Simulation of RF-heating and Transport in Fusion Plasmas

Essential for modeling heating and transport of fusion plasma is determining the distribution function of the plasma species. Characteristic for RF-heating is creation of particle distributions with a high energy tail. In the high energy region the deviation from a Maxwellian distribution is large while in the low energy region the distribution is close to a Maxwellian due to the velocity dependency of the collision frequency. Because of geometry and orbit topology Monte Carlo methods are frequently used. To avoid simulating the thermal part, {delta}f methods are beneficial. Here we present a new {delta}f Monte Carlo method with an adaptive scheme for reducing the total variance and sources, suitable for calculating the distribution function for RF-heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma dispersion function for a Fermi-Dirac distribution

A plasma dispersion function (PDF) is defined for a nonrelativistic Fermi-Dirac distribution and its properties are explored. The degree of degeneracy is described by a parameter {xi}=e{sup {mu}}{sub e}{sup /T}{sub e}, for electrons, with {mu}{sub e}/T{sub e} large and negative in the nondegenerate limit, and large and positive in the completely degenerate limit. The PDF is denoted Z(y,{xi}), where the variable y={omega}/{radical}(2)kV{sub e}, is the argument of the conventional PDF, Z(y)=Z(y,0), for a Maxwellian distribution. In the completely degenerate limit, Z(y,{xi}) approaches a logarithmic function that depends on the Fermi temperature and is independent of T{sub e}. Analytic approximations to Z(y,{xi}) are derived in terms of polylogarithmic functions for y{sup 2}>>1 and for y{sup 2}<<1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large deviations of the current in a two-dimensional diffusive system

In this notes we study the large deviations of the time-averaged current in the two-dimensional (2D) Kipnis-Marchioro-Presutti model of energy transport when subject to a boundary gradient. We use the tools of hydrodynamic fluctuation theory, supplemented with an appropriate generalization of the additivity principle. As compared to its one-dimensional counterpart, which amounts to assume that the optimal profiles responsible of a given current fluctuation are time-independent, the 2D additivity conjecture requires an extra assumption, i.e. that the optimal, divergence-free current vector field associated to a given fluctuation of the time-averaged current is in fact constant across the system. Within this context we show that the current distribution exhibits in general non-Gaussian tails. The ensuing optimal density profile can be either monotone for small current fluctuations, or non-monotone with a single maximum for large enough current deviations. Furthermore, this optimal profile remains invariant under arbitrary rotations of the current vector, providing a detailed example of the recently introduced Isometric Fluctuation Relation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Response to 'Comment on 'Heat capacity, enthalpy fluctuations, and configurational entropy in broken ergodic systems'' [J. Chem. Phys. 134, 147101 (2011)]

We show that Johari's critique of our work is based on a misunderstanding of ergodic theory and a disregard for the broken ergodic nature of glass. His analysis is in contradiction with well established experimental results in specific heat spectroscopy, shear-mechanical spectroscopy, and the vanishing of heat capacity in the limit of zero temperature. Based on these misinterpretations, Johari arrives at the erroneous conclusion that the residual entropy of glass is real. However, we show that Johari's result is an artifact in direct contradiction with both rigorous theory and experimental measurements.

36 MATERIALS SCIENCE↗

Electron inertia effects on the planar plasma sheath problem

The steady one-dimensional planar plasma sheath problem, originally considered by Tonks and Langmuir, is revisited. Assuming continuously generated free-falling ions and isothermal electrons and taking into account electron inertia, it is possible to describe the problem in terms of three coupled integro-differential equations that can be numerically integrated. The inclusion of electron inertia in the model allows us to obtain the value of the plasma floating potential as resulting from an electron density discontinuity at the walls, where the electrons attain sound velocity and the electric potential is continuous. Results from numerical computation are presented in terms of plots for densities, electric potential, and particles velocities. Comparison with results from literature, corresponding to electron Maxwell-Boltzmann distribution (neglecting electron inertia), is also shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Landau damping of Langmuir waves in non-Maxwellian plasmas

As free electrons move in the nearest neighbour ion's potential well, the equilibrium velocity departs from Maxwell distribution. The effect of the non-Maxwellian velocity distribution function (NMVDF) on many properties of the plasma such as the transport coefficients, the kinetic energy, and the degree of ionization is found to be noticeable. A correction to the Langmuir wave dispersion relation is proved to arise due to the NMVDF as well [Phys. Plasmas 17, 052105 (2010)]. The study is extended hereafter to include the effect of NMVDF on the Landau damping of Langmuir wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗