Search NASA⌕ Search

SEARCH · Search NASA

Results for “Systematics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Thermodynamic and kinetic properties of layered-CaCo2O4 for the Ca-ion batteries: a systematic first-principles study

One of the more promising directions in multivalent energy storage is systems based on Ca ion intercalation due to the potential for high voltage and capacity. A major challenge for enabling such a battery is to find cathode materials capable of fast ionic diffusion and reversible insertion of Ca ions. Here, on the basis of first-principles calculations, we have demonstrated that layered CaCo 2 O 4 exhibits favorable thermodynamic and kinetic properties that should enable topotactic Ca ion intercalation reactions. The P3-type layered Ca x Co 2 O 4 (0 < x < 1) with either of space groups of P 1 or P 2 1 / m are stable at multiple Ca concentrations and show a smooth voltage plateau higher than 3 V up to X = 0.5. The energy barriers of the single Ca ion migration are as low as 0.36 eV and 0.27 eV at the dilute and high vacancy concentration limits, respectively. Therefore, although varying the vacancy environments of the diffusing atom influences the migration barriers, they do not exceed 0.6 eV. Stochastic analysis of Ca hopping events performed by ab initio molecular dynamics (AIMD) simulation has shown that the migration barriers are lower than 0.32 eV. Therefore, the Ca diffusivity at room temperature extrapolated from the AIMD results is comparable to Li diffusivity (>10 -10 cm 2 s -1 ) in conventional Li cathode materials, suggesting the feasibility of layered Ca x Co 2 O 4 as multivalent cathode materials. Finally, the structural factors that enable fast diffusion are discussed.

25 ENERGY STORAGE↗

Bipolar membrane polarization behavior with systematically varied interfacial areas in the junction region

The palette of applications for bipolar membranes (BPMs) has expanded recently beyond electrodialysis as they are now being considered for fuel cell and electrolysis applications. Their deployment in emerging electrochemical technologies arises from the need to have a membrane separator that provides disparate pH environments and to prevent species crossover. Most materials research for BPMs has focused on water dissociation catalysts and less emphasis has been given to the design of the polycation–polyanion interface for improving BPM performance. Here, soft lithography fabricated a series of micropatterned BPMs with precise control over the interfacial area in the bipolar junction. Polarization experiments showed that a 2.28× increase in interfacial area led to a 250 mV reduction in the onset potential. Additionally, the same increase in interfacial area yielded marginal improvements in current density due to the junction region being under kinetics-diffusion control. A simple physics model based on the electric field of the junction region rationalized the reduction in the overpotential for water dissociation as a function of interfacial area. Finally, the soft lithography approach was also conducive for fabricating BPMs with different chemistries ranging from perfluorinated polymer backbones to alkaline stable poly(arylene) hydrocarbon polymers. These polymer chemistries are better suited for fuel cell and electrolysis applications. The BPM featuring the alkaline stable poly(terphenyl) anion exchange membrane had an onset potential of 0.84 V, which was near the thermodynamic limit, and was about 150 mV lower than a commercially available variant.

25 ENERGY STORAGE↗

Uncovering novel liquid organic hydrogen carriers: a systematic exploration of chemical compound space using cheminformatics and quantum chemical methods

We present a comprehensive, in silico-based discovery approach to identifying novel liquid organic hydrogen carrier (LOHC) candidates using cheminformatics methods and quantum chemical calculations. We screened over 160 billion molecules from ZINC15 and GDB-17 chemical databases for structural similarity to known LOHCs and employed a data-driven selection criterion connecting molecular features with dehydrogenation enthalpy. This scoring criterion effectively predicts dehydrogenation enthalpies from SMILES strings, streamlining the LOHC screening process. After rigorous screening and down-selection, we compiled a database of 3000 dehydrogenation reactions for the most promising LOHC candidates, setting the stage for future selection based on kinetics and catalysis. This work demonstrates the significant impact of integrating quantum chemistry and cheminformatics in materials discovery, accelerating the selection process while reducing experimental efforts and time. By proposing new molecules as prospective LOHC candidates, our study provides a valuable resource for researchers and engineers in the development of advanced LOHC systems and showcases a successful approach for high-throughput discovery, contributing to more efficient and sustainable energy storage solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic characterization of selenium speciation in coal fly ash

Millions of tons of coal fly ashes (CFAs) are produced annually during coal combustion in the U.S., which are commonly beneficially used in the concrete industry or disposed of in ash ponds. CFAs contain trace amounts of a range of toxic heavy metals including selenium (Se). Because the toxicity of Se is dependent on its speciation, investigating Se speciation in CFAs as affected by coal source and combustion conditions can help understand the related environmental and human health impacts during disposal or beneficial reuse. In this study, a set of representative CFA samples were characterized for Se speciation using synchrotron X-ray absorption spectroscopy (XAS) and micro-X-ray fluorescence spectromicroscopy (μ-XRF/XAS). Se-containing particles were highly heterogeneous, and individual particles might contain multiple oxidation states including Se(0), Se(IV), and Se(VI). Principal component analysis was performed for sample characteristics including Al 2 O 3 , SiO 2 , CaO, FeO, loss on ignition, average particle size, Se concentration, and Se oxidation state. Selective catalytic reduction (SCR), which is used to limit nitrogen oxide (NO x ) emissions during coal combustion, was found to be associated with the presence of reduced Se oxidation states, with up to 90% Se(0) observed in samples with SCR. Alongside SCR, FeO content may also influence Se speciation.

01 COAL, LIGNITE, AND PEAT↗

Systematic improvement of redox potential calculation of Fe(III)/Fe(II) complexes using a three-layer micro-solvation model

Electrochemical transformations of metal ions in aqueous media are challenging to model accurately due to the dynamic solvation structure surrounding ions at different charge states. Predictive modeling at the atomistic scale is essential for understanding these solvation architectures but is often computationally prohibitive. In this contribution, we present a simple, fast, and accurate three-layer micro-solvation model to evaluate the redox potential of metal ions in aqueous solutions. Our model, developed and validated for Fe 3+ /Fe 2+ redox potentials, combines the DFT-based geometry optimizations of the octahedral Fe complex with two layers of explicit water molecules to capture solute–solvent interactions and an implicit solvation model to account for bulk solvent effects. This approach yields accurate predictions for Fe 3+ /Fe 2+ redox potentials in water, achieving errors of 0.02 V with ωB97X-V, 0.01 V with ωB97X-D3, 0.04 V with ωB97M-V, and 0.02 V with B3LYP-D3 functionals. We further demonstrate the generality of our model by applying it to additional metal complexes, including the challenging Fe(CN) 6 3−/4− system, where our model successfully achieves close agreement with experimental values, with an error of 0.07 V and an average error of 0.21 V for all five systems. In summary, the presented simple solvation model has broad applicability and potential for enhancing computational efficiency in redox potential predictions across various chemical and industrial processes of metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Systematic Study of the Quasi-Coherent Mode in the High Density H-Mode Regime of Wendelstein 7-AS

The High Density H-mode (HDH) is a highly promising ELM-free H-mode on the Wendelstein 7-AS (W7-AS) stellarator exhibiting no impurity accumulation. As future fusion-oriented stellarator devices need to run at high densities, a regime often susceptible to impurity accumulation in the standard H-modes of W7-AS, the HDH is of particular interest. The mechanism responsible for the reduced impurity concentration is still undetected and remains a central question in understanding this H-mode. Preliminary results are presented on a possible candidate, a Quasi-Coherent (QC) mode sometimes observed in the HDH regime. The properties of this mode, such as its frequency modulation, frequency and amplitude dependences are discussed as well as its universality with a viewpoint to its possible role in the HDH physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Systematic analysis of astrophysical S-factors and thermonuclear reaction rates

The astrophysical S-factors of the {sup 13}C({alpha},n){sup 16}O, {sup 17}O({alpha},n){sup 20}Ne, {sup 21}Ne({alpha},n){sup 24}Mg and {sup 25}Mg({alpha},n){sup 28}Si reactions are analyzed with DWBA. The gross structures of the experimental data are reproduced by the DWBA calculations. The resulting reaction rates are compared with those in the CF88 and NACRE compilations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic and routine analysis of radial correlation reflectometry data in JET

This paper discusses a tool specially developed for the analysis of radial correlation reflectometry data in JET. The tool, which calculates the correlation length and coherent reflection from the raw data, has been designed for offline analysis and to assist diagnostic operators. After being verified in controlled tests using theoretical signals, the tool is validated by means of a study of ITB plasmas in JET.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Systematic study of the nuclear potential through high precision back-angle quasi-elastic scattering measurements of {sup 16}O and {sup 32}S on various targets

Elastic and inelastic scattering have proven an excellent method to probe the nuclear potential in the surface region [1]. A surface diffuseness parameter of around 0.63 fm is accepted as describing elastic and inelastic scattering data. A new method to determine the diffuseness was proposed [2] using high precision quasi-elastic excitation functions at sub-barrier energies, and at backward angles. In response to this proposal, we have made measurements for {sup 32}S+{sup 170}Er, {sup 186}W, {sup 197}Au, {sup 208}Pb[3], and more recently for the reactions {sup 16}O+{sup 144,154}Sm, {sup 186}W, {sup 197}Au, {sup 208}Pb[4].Both single channel and coupled-channels calculations have been performed to extract the diffuseness parameter of the nuclear potential, assuming a Woods-Saxon shape. For the reactions involving near-spherical targets, both theoretical analyses give the same diffuseness parameter, as had been hoped, showing that the effect of couplings to intrinsic excited states in the target and projectile is negligible. On the other hand, for deformed systems, coupling effects are surprisingly important even at deep sub-barrier energies, reducing the flux at backward angles.Energy spectra recorded with the back-angle Si detector show a large number of distinct peaks as well as a broad structure at even higher excitation energies. A comparison of the back-scattered energy spectra with coupled-channels calculations demonstrates that including couplings only to low lying collective states in coupled-channels calculations is inadequate in describing the reaction mechanism even at energies close to the barrier.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic Investigation of Isoscaling of Reconstructed Quasiprojectiles from Collisions in the Fermi Energy Regime

In this work, the isoscaling for the {sup 40}Ca+{sup 112,124}Sn reactions at the beam energy of 45 MeV/A was investigated as a function of the excitation energy of reconstructed quasi-projectiles. The excitation energy dependence of the isoscaling parameter obtained from the intra-system isoscaling was investigated and is expected to provide information for the determination of the symmetry energy coefficient of highly excited nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic Study of Elliptic Flow at RHIC-PHENIX

In non-central high energy heavy ion collisions, the initial spatial anisotropy is transferred to the final momentum anisotropy due to a pressure gradient in the collision participants, p{sub T} and centrality dependences of the azimuthal anisotropy ({nu}{sub 2}) are measured for charged hadrons in different energies and collision systems by the PHENIX experiment at RHIC. It was newly found that {nu}{sub 2} divided by the geometrical participant eccentricity is exponentially increasing with the number of the participants to the 1/3, and there is the universal scaling for {nu}{sub 2} with different energies and collision sizes with eccentricity and number of quark scalings. The results indicate that {nu}{sub 2} is not only determinated by the geometrical eccentricity, but {sub 2} is evolving during the finite time which could be related to the size of collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A statistical analysis of systematic errors in temperature and ram velocity estimates from satellite-borne retarding potential analyzers

The use of biased grids as energy filters for charged particles is common in satellite-borne instruments such as a planar retarding potential analyzer (RPA). Planar RPAs are currently flown on missions such as the Communications/Navigation Outage Forecast System and the Defense Meteorological Satellites Program to obtain estimates of geophysical parameters including ion velocity and temperature. It has been shown previously that the use of biased grids in such instruments creates a nonuniform potential in the grid plane, which leads to inherent errors in the inferred parameters. A simulation of ion interactions with various configurations of biased grids has been developed using a commercial finite-element analysis software package. Using a statistical approach, the simulation calculates collected flux from Maxwellian ion distributions with three-dimensional drift relative to the instrument. Perturbations in the performance of flight instrumentation relative to expectations from the idealized RPA flux equation are discussed. Both single grid and dual-grid systems are modeled to investigate design considerations. Relative errors in the inferred parameters for each geometry are characterized as functions of ion temperature and drift velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Systematic Study of Astrophysical Reaction Rates through {sup 8}Li

Excitation functions of {sup 8}Li({alpha},n),(d, t) and {sup 12}B({alpha},n) reactions were directly measured in the energy region of astrophysical interest using low-energy radioactive nuclear beams of {sup 8}Li and {sup 12}B. Each measured excitation function is strongly affected by one or more resonances through a compound nucleus. The measured excitation functions are presented. Dominant r-process paths through {sup 8}Li at various temperatures are discussed and our future experimental plan is also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic Study of EC Decays in the {sup 146}Gd Region Relevant for a Monoenergetic Neutrino Beam Facility

The availability of a monochromatic neutrino source with adjustable energy could be an invaluable tool for the study of neutrino oscillations and related phenomena. We have studied the beta decay of {sup 152}Yb, {sup 150}Er and {sup 156}Yb, which could be possible candidate nuclei for the construction of such facility, using the Total Absorption Gamma Spectroscopy (TAGS) technique. The results from these measurements are compared with High Resolution (HR) data available from databases. The importance of the use of the TAGS technique is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗