Search NASA⌕ Search

SEARCH · Search NASA

Results for “accelerator performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

SU-E-T-194: Commissioning of Monaco Treatment Planning System On An Elekta VersaHD Linear Accelerator

Purpose: The Monaco treatment planning system (TPS) uses a Monte-Carlo algorithm based dose computation engine to model the photon beams of a linear accelerator. The aim is to perform verification of Monaco TPS beam modeling of a Elekta VersaHD linac with 6MV, 6MV FFF, 10 MV, 10MV FFF, 18MV photon beams and 160 multileaf collimators (MLC) with a projected width of 5-mm at the isocenter. Methods: A series of dosimetric tests were performed to validate Monaco calculated beams including point dose measurement in water with and without heterogeneity and 2-dimensional dose distributions on a Delta4 bi-planar diode dosimeter array (Scandidos, Uppsala, Sweden). 3D conformal beams of different field sizes, source-to-surface distances, wedges, and gantry angles were delivered onto a phantom consisting of several plastic water and Styrofoam slabs. Point dose measurements were verified with a PTW 31013 Semiflex 0.3 cc ionization chamber (PTW, Freiburg, Germany). In addition, 8 step and shoot intensity modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) beams included in the Monaco TPS commissioning suite were verified against measurements on Delta4 to test and fine tune parameters in the beam model. IMRT verification was computed using gamma analysis with dose difference and distance-to-agreement criteria of 3%/3mm with a dose threshold of 10%. Results: Point dose measurements agreed within 2% in the homogeneous phantom and within 3% in the heterogeneous phantom for all photon energies. IMRT beams yielded a passing percentage of 99.1±1.1% in the gamma analysis which is well above the institutional passing threshold of 90%. Conclusion: Monaco TPS commissioning was successfully performed for all the photon energies on the Elekta VersaHD linac prior to clinical usage.

60 APPLIED LIFE SCIENCES↗

Bayesian optimization of laser wakefield acceleration via spectral pulse shaping

In this paper, we investigate the effect of spectral pulse shaping of the laser driver on the performance of channel-guided, laser–plasma accelerators. The study was carried out with the assistance of Bayesian optimization using particle-in-cell simulations. We used a realistic plasma profile based on a novel optical-field-ionized channel technique with ionization injection and low, on-axis plasma densities to maximize the energy gain of the electron bunch trailing the laser. Spectral shaping allows us to modify the temporal profile of the laser driver while keeping the laser energy constant, affecting the acceleration and injection processes. In addition, we consider how modifying the plasma channel parameters may affect the target outputs. Given the complexity and breadth of the parameter space in question, we used numerical optimization to identify high-performing configurations. In particular, we found laser profiles with additional spectral content that, when used with optimal plasma channel parameters, result in charge content an order of magnitude higher than the baseline Gaussian case while also increasing the mean energy of the electron bunch.

Physics - Plasma physics↗

Accelerating the Computation of Detailed Chemical Reaction Kinetics for Simulating Combustion of Complex Fuels

Combustion of hydrocarbon fuels has been a very challenging scientific and engineering problem due to the complexity of turbulent flows and hydrocarbon reaction kinetics. There is an urgent need to develop an efficient modeling capability to accurately predict the combustion of complex fuels. Detailed chemical kinetic models for the surrogates of fuels such as gasoline, diesel and JP-8 consist of thousands of chemical species and Arrhenius reaction steps. Oxygenated fuels such as bio-fuels and heavier hydrocarbons, such as from newer fossil fuel sources, are expected to have a much more complex chemistry requiring increasingly larger chemical kinetic models. Such models are beyond current computational capability, except for homogeneous or partially stirred reactor type calculations. The advent of highly parallel multi-core processors and graphical processing units (GPUs) promises a steep increase in computational performance in the coming years. This paper will present a software framework that translates the detailed chemical kinetic models to high- performance code targeted for GPU accelerators.

02 PETROLEUM↗

Evaluating LULESH Kernels on OpenCL FPGA

FPGAs are becoming promising heterogeneous computing components for high-performance computing. In this paper, we evaluate the resource utilizations, performance, and performance per watt of our implementations of the LULESH kernels in OpenCL on an Arria10-based FPGA platform. LULESH is a complex proxy application in the CORAL benchmark suite. We choose two representative kernels “CalcFBHourglassForceForElems” and “EvalEOSForElems” from the application in our study. Compared with the baseline implementations, our optimizations improve the performance by a factor of 1.65X and 2.96X for the two kernels on the FPGA, respectively. Using directives for accelerator programming, we also evaluate the performance of the kernels on an Intel Xeon 16-core CPU and an Nvidia K80 GPU. We find that the FPGA, constrained by the memory bandwidth, can perform 1.05X to 3.4X better than the CPU and GPU for small problem sizes. For the first kernel, the performance per watt on the FPGA is 1.59X and 7.1X higher than that on an Intel Xeon 16-core CPU and an Nvidia K80 GPU, respectively. For the second kernel, the performance per watt on the GPU is 1.82X higher than that on the FPGA. However, the performance per watt on the FPGA is 1.77X higher than that on the CPU.

FPGA↗

A Performance and Energy Study of GPU-Resident Preconditioners for Conjugate Gradient Solvers: In the Context of Existing and Novel Approaches

Optimizing a particular subprogram out of the set of Basic (sparse) Linear Algebra Subprograms (BLAS) for a given architecture is a common topic of research. In applications, however, these BLAS functions rarely appear in isolation; usually, many of them are used together, in various combinations and with varying inputs. As the need to solve a large, sparse linear system is ubiquitous throughout HPC applications, linear solvers constitute a realistic, sufficiently complex and well-defined representative use case for composite BLAS routines. To this end, based on a representative set of matrices drawn from a diverse set of fields, we present a framework to study, from the performance and energy perspective, the efficacy of GPU- resident parallel Conjugate Gradient (CG) linear solver with different preconditioner options, including Gauss-Seidel, Jacobi, and incomplete Cholesky. We also propose a novel GPU-based preconditioner, in which the triangular solves are approximated by an iterative process. The development of this preconditioner was motivated by solving large graph Laplacian linear systems, for which the existing preconditioners either perform slow on GPU-based platforms or are not applicable. We compare the performance of these preconditioners on different hardware accelerator architectures, i.e., AMD MI250X, MI100, Nvidia A100, V100, and Jetson. Our experiments reveal performance trade-offs and provide information on how to select the best strategy for the given linear system, dictated by its properties, and the platform of interest. We demonstrate the application of our novel preconditioner for solving CG and graph Laplacian systems. Overall, the framework can be utilized as a benchmark to guide informed decisions in choosing a specific preconditioner, i.e., whether it is better to rely on the performance of a triangular solver or on the performance of sparse matrix-vector product. Finally, by considering power consumption to solve the linear systems, we report the energy footprint for the solvers.

Preconditioned Conjugate Gradient, GPUs, iterative↗

Surface-Directed Fabrication of Integrated Membrane-Electrode Interfaces

In the past five years, we have established a research program to investigate the integration of electrode/catalyst support, gas diffusion pathways, and ionomer into a single network based on a bottom-up, surface-directed approach. Here, the porous electrode surface provides the common foundation for both catalyst deposition and ionomer growth to develop a highly controlled process. Our efforts have focused on (1) the preparation of surface-initiated ionomer that can be grown from electrodes of essentially any geometry and is chemisorbed to the active electrode surface, and (2) the integration of this ionomer with both planar and 3-D electrodes that are atomically modified by Pt catalysts. Figure 1 shows a schematic of a single pore of such an integrated cathode where a catalytic Pt atomic layer is supported along the pores of a nanoporous gold electrode. The catalyst layer is electronically accessible from the metal cathode and in contact with proton-conducting ionomer to yield extremely high utilization efficiencies of the catalyst (approaching 100%) with the ultralow loadings expected from atomic overlayers. We have introduced a new class of ionomer film that is grown from the catalyst/electrode interface to develop proton conducting pathways throughout the 3-D electrode and to the adsorbed catalyst particles. This ionomer is a comb polymer designed to contain sulfonate-lined channels for rapid proton conduction as well as hydrophobic domains (fluorocarbon or hydrocarbon) to promote O 2 solubility and transfer. This interfacial ionomer is designed to interface with a bulk membrane (such as Nafion) and an anode that could be engineered in a similar way. A key conclusion thus far is that ionomer and Pt catalyst can be integrated at a single interface (both 2-D and 3-D) to provide a high level of control over the construction of electrodes. To expand our efforts to date, we seek to utilize the materials chemistry we have developed to investigate how the depth-dependent structure of an ionomer film affects its performance in transferring protons and oxygen to accelerate the rate of the oxygen reduction reaction. By correlating structure and composition to performance and identifying barriers that limit efficiency, we seek to design ultra high performance ionomer films that are customized for the oxygen reduction reaction.

08 HYDROGEN↗

Carbon Nanotube-Based Digital Vacuum Electronics and Miniature Instrumentation for Space Exploration

JPL has developed high performance cold cathodes using arrays of carbon nanotube bundles that produce > 15 A/sq cm at applied fields of 5 to 8 V/micron without any beam focusing. They have exhibited robust operation in poor vacuums of 10(exp -6) to 10(exp -4) Torr- a typically achievable range inside hermetically sealed microcavities. Using these CNT cathodes JPL has developed miniature X-ray tubes capable of delivering sufficient photon flux at acceleration voltages of <20kV to perform definitive mineralogy on planetary surfaces; mass ionizers that offer two orders of magnitude power savings, and S/N ratio better by a factor of five over conventional ionizers. JPL has also developed a new class of programmable logic gates using CNT vacuum electronics potentially for Venus in situ missions and defense applications. These digital vacuum electronic devices are inherently high-temperature tolerant and radiation insensitive. Device design, fabrication and DC switching operation at temperatures up to 700 C are presented in this paper.

Carbon Nanotube↗

Models for the Effects of G-seat Cuing on Roll-axis Tracking Performance

Including whole-body motion in a flight simulator improves performance for a variety of tasks requiring a pilot to compensate for the effects of unexpected disturbances. A possible mechanism for this improvement is that whole-body motion provides high derivative vehicle state information whic allows the pilot to generate more lead in responding to the external disturbances. During development of motion simulating algorithms for an advanced g-cuing system it was discovered that an algorithm based on aircraft roll acceleration producted little or no performance improvement. On the other hand, algorithms based on roll position or roll velocity produced performance equivalent to whole-body motion. The analysis and modeling conducted at both the sensory system and manual control performance levels to explain the above results are described.

Levison, W. H.↗

Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint

FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of anentire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

14 SOLAR ENERGY↗

A minimal set of invariants as a systematic approach to higher order gravity models

Higher-order gravity models have been recently the subject of much attention in the context of cosmic acceleration. These models are derived by adding various curvature invariants to the Einstein-Hilbert action. Several studies showed that these models can have late-time self-acceleration and could, in some cases, fit various observational constraints. In view of the infinite spectrum of invariants that could be built from curvature tensors, we propose here a method based on minimal sets of independent invariants as a possible route for a systematic approach to these models. We explore a connection made between theorems on bases in invariants theory in relativity and higher-order cosmological models. A dynamical system analysis is performed and some models with accelerating attractors are discussed. The asymptotic behavior of the models is also studied using analytical calculations.

79 ASTRONOMY AND ASTROPHYSICS↗

Resonance, particle dynamics, and particle transmission in the micro-accelerator platform

We describe particle dynamics in the Micro-Accelerator Platform (MAP), a slab-symmetric dielectric laser accelerator (DLA), and model the expected performance of recently fabricated MAP structures. The quality of the structure resonances has been characterized optically, and results are compared with simulation. 3D trajectory analysis is used to model acceleration in those same structures 'as built.' Results are applied to ongoing beam transmission and acceleration tests at NLCTA/E-163, in which transmission of 60 MeV injected electrons through the beam channel of the MAP was clearly observed, despite the overfilling of the structure by the beam.

43 PARTICLE ACCELERATORS↗

Addition of gaseous olefin to produce boiler fuel and stability studies

As a renewable liquid fuel, bio‐oil produced from fast pyrolysis of biomass is receiving increasing attention. However, bio‐oil has some negative properties, such as polymerization over time, high water content, high viscosity, and low energy value. It must be upgraded to be used as a fuel. The objective of this study was to develop an upgrading method by esterification and olefination reactions to produce bio‐oil with lower water content and higher energy value for combustion as a boiler fuel. Loblolly pine wood was pyrolyzed at a feed rate of ∼7 kg/h in a Mississippi State University proprietary auger reactor to produce bio‐oil with 65% yield. Upgrading reactions were performed in a high‐pressure batch autoclave. Bio‐oil was reacted with alcohols and gaseous olefins in the presence of a heterogeneous catalyst to produce upgraded bio‐oil. The influence of reaction conditions such as reaction time, reaction temperature, and catalyst content were evaluated. Physical and chemical properties such as acid value, higher heating value, water content, and optimal conditions were identified. The result of olefination shows improved bio‐oil quality and increased energy density. Accelerated aging tests were also performed. © 2014 American Institute of Chemical Engineers Environ Prog, 2014 34: 933–941, 2015

Tao, Jingming↗

Eight Pulse Performance of DARHT Axis II - Preliminary Results

The DARHT-II accelerator produces a 1.65-kA, 17-MeV beam in a 1600-ns pulse. Standard operation of the DARHT Axis II accelerator involves extracting four short pulses from the 1.6 us long macro-pulse produced by the LIA. The four short pulses are extracted using a fast kicker in combination with a quadrupole septum magnet and then transported for several meters to a high-Z material target for conversion to x-rays for radiography. The ability of the DARHT Axis 2 kicker to produce more than the standard four pulse format has been previously demonstrated. This capability was developed to study potential risks associated with beam transport during an initial commissioning phase at low energy (8 MeV) and low current (1.0 kA).The ability of the kicker to deliver more than four pulses to the target has been realized for many years. This note describes the initial results demonstrating this capability.

43 PARTICLE ACCELERATORS↗

SU-E-T-479: IMRT Plan Recalculation in Patient Based On Dynalog Data and the Effect of a Single Failing MLC Motor

Purpose: Using Linac dynamic logs (Dynalogs) we evaluate the impact of a single failing MLC motor on the deliverability of an IMRT plan by assessing the recalculated dose volume histograms (DVHs) taking the delivered MLC positions and beam hold-offs into consideration. Methods: This is a retrospective study based on a deteriorating MLC motor (leaf 36B) which was observed to be failing via Dynalog analysis. To investigate further, Eclipse-importable MLC files were generated from Dynalogs to recalculate the actual delivered dose and to assess the clinical impact through DVHs. All deliveries were performed on a Varian 21EX linear accelerator equipped with Millennium-120 MLC. The analysis of Dynalog files and subsequent conversion to Eclipse-importable MLC files were all performed by in-house programming in Python. Effects on plan DVH are presented in the following section on a particular brain-IMRT plan which was delivered with a failing MLC motor which was then replaced. Results: Global max dose increased by 13.5%, max dose to the brainstem PRV increased by 8.2%, max dose to the optic chiasm increased by 7.6%, max dose to optic nerve increased by 8.8% and the mean dose to the PTV increased by 7.9% when comparing the original plan to the fraction with the failing MLC motor. The reason the dose increased was due to the failure being on the B-bank which is the lagging side on a sliding window delivery, therefore any failures on this side will cause an over-irradiation as the B-bank leaves struggles to keep the window from growing. Conclusion: Our findings suggest that a single failing MLC motor may jeopardize the entire delivery. This may be due to the bad MLC motor drawing too much current causing all MLCs on the same bank to underperform. This hypothesis will be investigated in a future study.

60 APPLIED LIFE SCIENCES↗

New Method for the Generation of Secondary Particle Beams at Accelerators

The generation of beams of secondary particles (π and K mesons) at proton accelerators is a difficult scientific and engineering problem. To obtain narrow directional particle beams for experiments, intense extracted proton beams are used, secondary particles (π and K mesons) are generated at an external target, and they are focused and transferred through long magneto-optical channels. In this work, a surprisingly simple method based on a crystal focusing device has been proposed to obtain secondary beams. An experiment on the production of a secondary beam using a crystal has been performed at the U-70 accelerator. Schemes for the formation of beams with energies E ~ 1 TeV have been proposed for large colliders such as the Large Hadron Collider.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Field, frequency, and temperature dependencies of the surface resistance of nitrogen diffused niobium superconducting radio frequency cavities

We investigate the rf performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120 – 165 ° C for an extended period of time (24–48 h) either in high vacuum or in a low partial pressure of ultrapure nitrogen. The improvement in Q 0 with a Q rise was observed when nitrogen gas was injected at ∼ 300 ° C during the cavity cooldown from 800 ° C and held at 165 ° C , without any degradation in accelerating gradient over the baseline performance. The treatment was applied to several elliptical cavities with frequency ranging from 0.75 to 3.0 GHz, showing an improved quality factor as a result of low temperature nitrogen treatments. The Q rise feature is similar to that achieved by nitrogen alloying Nb cavities at higher temperature, followed by material removal by electropolishing. The surface modification was confirmed by the change in electronic mean free path and tuned with the temperature and duration of heat treatment. The decrease of the temperature-dependent surface resistance with increasing rf field, resulting in a Q rise, becomes stronger with increasing frequency and decreasing temperature. The data suggest a crossover frequency of ∼ 0.95 GHz above that the Q rise phenomenon occurs at 2 K. Some of these results can be explained qualitatively with an existing model of intrinsic field-dependence of the surface resistance with both equilibrium and nonequilibrium quasiparticle distribution functions. The change in the Q slope below 0.95 GHz may result from masking contribution of trapped magnetic flux to the residual surface resistance. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

A compact high-resolution X-ray ion mobility spectrometer

For the ionization of gaseous samples, most ion mobility spectrometers employ radioactive ionization sources, e.g., containing {sup 63}Ni or {sup 3}H. Besides legal restrictions, radioactive materials have the disadvantage of a constant radiation with predetermined intensity. In this work, we replaced the {sup 3}H source of our previously described high-resolution ion mobility spectrometer with 75 mm drift tube length with a commercially available X-ray source. It is shown that the current configuration maintains the resolving power of R = 100 which was reported for the original setup containing a {sup 3}H source. The main advantage of an X-ray source is that the intensity of the radiation can be adjusted by varying its operating parameters, i.e., filament current and acceleration voltage. At the expense of reduced resolving power, the sensitivity of the setup can be increased by increasing the activity of the source. Therefore, the performance of the setup can be adjusted to the specific requirements of any application. To investigate the relation between operating parameters of the X-Ray source and the performance of the ion mobility spectrometer, parametric studies of filament current and acceleration voltage are performed and the influence on resolving power, peak height, and noise is analyzed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SU-G-JeP1-04: Characterization of a High-Definition Optical Patient Surface Tracking System Across Five Installations

Purpose: To assess the performance of Varian’s real-time, Optical Surface Monitoring System (OSMS) by measuring relative regular and irregular surface detection accuracy in 6 degrees of motion (6DoM), across multiple installations. Methods: Varian’s Intracranial SRS Package includes OSMS, which utilizes 3 HD camera/projector pods to map a patient surface, track intra-fraction motion, and gate the treatment beam if motion exceeds a threshold. To evaluate motion-detection accuracy of OSMS, we recorded shifts of a cube-shaped phantom on a single Varian TrueBeam linear accelerator as known displacements were performed incrementally across 6DoM. A subset of these measurements was repeated on identical OSMS installations. Phantom motion was driven using the TrueBeam treatment couch, and incremented across ±2cm in steps of 0.1mm, 1mm, and 1cm in the cardinal planes, and across ±40° in steps of 0.1°, 1°, and 5° in the rotational (couch kick) direction. Pitch and Roll were evaluated across ±2.5° in steps of 0.1° and 1°. We then repeated this procedure with a frameless SRS setup with a head phantom in a QFix Encompass mask. Results: Preliminary data show OSMS is capable of detecting regular-surfaced phantom displacement within 0.03±0.04mm in the cardinal planes, and within 0.01±0.03° rotation across all planes for multiple installations. In a frameless SRS setup, OSMS is accurate to within 0.10±0.07mm and 0.04±0.07° across 6DoM. Additionally, a reproducible “thermal drift” was observed during the first 15min of monitoring each day, and characterized by recording displacement of a stationary phantom each minute for 25min. Drift settled after 15min to an average delta of 0.26±0.03mm and 0.38±0.03mm from the initial capture in the Y and Z directions, respectively. Conclusion: For both regular surfaces and clinical SRS situations, OSMS exceeds quoted detection accuracy. To reduce error, a warm-up period should be employed to allow camera/projector pod thermal stabilization.

60 APPLIED LIFE SCIENCES↗