Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Synthesis of metallic glass nanoparticles by inert gas condensation

Inert Gas Condensation (IGC) is a versatile method for the synthesis of ultrafine nanoparticles. While it has been mostly used in the synthesis of nanocrystalline particles it has also been employed in the synthesis of metallic glass nanoparticles, which can be further used in the generation of nanostructured metallic glasses, known as nanoglasses. In this work, we use molecular dynamics simulations to investigate the IGC processes leading to the synthesis of Cu 64 Zr 36 amorphous nanoparticles. We investigate the growth of nanoparticles up to 7.3 nm diameter using long simulations of up to 130 ns, under relatively low pressures in the range of 4 to 10 bars. Results indicate a significant effect of pressure on the final structure of the amorphous nanoparticles, yet no clear influence on the segregation of Cu atoms to its surface. Cu segregation occurring at all pressures results in a thin Cu rich layer, about 2.5 Å thick, that coats all nanoparticles. Here, statistics of atomic Voronoi polyhedra shows that the fraction of full icosahedra in the nanoparticles produced at 4 bars is equivalent to that of bulk metallic glasses produced by melt and quench at 10 9 K/s. Higher pressures result in a lower fraction of full icosahedra.

36 MATERIALS SCIENCE↗

Atomic layer deposition of GaN at low temperatures

The authors report on the self-limiting growth of GaN thin films at low temperatures. Films were deposited on Si substrates by plasma-enhanced atomic layer deposition using trimethylgallium (TMG) and ammonia (NH{sub 3}) as the group-III and -V precursors, respectively. GaN deposition rate saturated at 185 deg. C for NH{sub 3} doses starting from 90 s. Atomic layer deposition temperature window was observed from 185 to {approx}385 deg. C. Deposition rate, which is constant at {approx}0.51 A/cycle within the temperature range of 250 - 350 deg. C, increased slightly as the temperature decreased to 185 deg. C. In the bulk film, concentrations of Ga, N, and O were constant at {approx}36.6, {approx}43.9, and {approx}19.5 at. %, respectively. C was detected only at the surface and no C impurities were found in the bulk film. High oxygen concentration in films was attributed to the oxygen impurities present in group-V precursor. High-resolution transmission electron microscopy studies revealed a microstructure consisting of small crystallites dispersed in an amorphous matrix.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Zinc-Nickel and Graphene Layered Structures on Steel Substrates

Large–area single layers of graphene are synthesized using chemical vapor deposition techniques and are assembled onto steel substrates that are finished with a thin layer of electrodeposited zinc–nickel (ZnNi). Atomic force microscopy combined with Raman spectroscopy is used to determine the number of the assembled graphene layers and to characterize the defects in their crystal structure. The graphene–ZnNi–steel layered specimens are exposed to a salt–fog environment. The defects in the structure of the graphene single layers are found to accelerate corrosion and the formation of a resistive oxide layer. The chemical composition and element map of the reacted surfaces are studied by x–ray photoelectron spectroscopy. In conclusion, the electrical properties of the samples before and after the salt–fog testing are evaluated using sheet resistance measurements.

36 MATERIALS SCIENCE↗

Effect of TiO x Substrate Interactions on the Electrocatalytic Oxygen Reduction Reaction at Au Nanoparticles

Here, we report a robust model for studying electrocatalytic reactions at metal nanoparticles (NPs) in contact with metal oxide surfaces. The metal oxide layer (TiO x ) is prepared by atomic layer deposition, and it is sufficiently thin that it does not hinder electron transfer from the underlying conductive electrode to the supported AuNP electrocatalysts. In advance of the experiments, density functional theory (DFT) predicted that direct contact between AuNPs and TiO x would lead to enhanced activity for the oxygen reduction reaction (ORR). DFT attributes the observed ORR enhancement to partial charge transfer from oxygen vacancies within the TiO x film to the supported AuNPs and hence formation of anionic Au species. The experimental findings are in near quantitative agreement with the DFT results. Specifically, compared to isolated AuNPs, decreases of ~ 100 and ~ 50 mV in the ORR onset potential are observed experimentally for AuNPs supported on TiO 1.9 and TiO 2.0 films, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Atomic-Scale Understanding of UO 2 Surface Evolution during Anoxic Dissolution

Our present understanding of surface dissolution of nuclear fuels such as uranium dioxide (UO 2 ) is limited by the use of non-local characterization techniques. In this paper, we discuss the use of state-of-the-art scanning transmission electron microscopy (STEM) to reveal atomic–scale changes occurring to UO 2 thin films subjected to anoxic dissolution in deionised water. No amorphisation of the UO 2 film surface during dissolution is observed, and dissolution occurs preferentially at surface reactive sites that present as surface pits which increase in size as the dissolution proceeds. Using a combination of STEM imaging modes, energy-dispersive X-ray spectroscopy (STEM-EDS), and electron energy loss spectroscopy (STEM-EELS), we investigate structural defects and oxygen passivation of the surface that originates from the filling of the octahedral interstitial site in the centre of the unit cells and its associated lattice contraction. Taken together, our results reveal complex pathways for both the dissolution and infiltration of solutions into UO 2 surfaces.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Interfacial Engineering for High Efficiency Nanorod Array Structured Perovskite Solar Cells

TiO 2 nanorod (NR) array for perovskite solar cells (PSCs) has attached great importance due to superb power conversion efficiency (PCE) compared to traditional mesoporous TiO 2 film. A TiO 2 compact layer for the growth of TiO 2 NR array via spin-coating cannot meet the requirements for efficient NR based PSCs. Herein we have developed and demonstrated inserting an bifunctional extra-thin TiO 2 interlayer (5 nm) by atomic layer deposition (ALD) at the interface of FTO/TiO 2 compact layer to achieve an alleviated electron exchange and a reduced energetic barrier. Thus, an accelerated extraction of electrons from TiO 2 NR arrays via the compact layer to FTO substrate is ready for improving the PSC efficiency. The thickness of the spin-coated TiO 2 compact layer on the ALD-deposited TiO 2 layer is spontaneously optimized. Finally, an outstanding efficiency of 20.28% has been achieved from a champion PSC with negligible hysteresis and high reliability. To the best of our knowledge, this is the first time to demonstrate the superiority of TiO 2 -NR based PSCs withstanding in dry heat and thermal cycling tests. The results are of great importance for the preparation of efficient and durable PSCs for our real-world applications.

25 ENERGY STORAGE↗

A Perspective on Thin-Film Perovskites as Supports for Metal Catalysts

Perovskite-supported metals have sometimes been referred to as “intelligent catalysts” because of the potential to regenerate sintered particles by driving the metal into the oxide lattice by high-temperature oxidation and releasing the metal by reduction. However, low surface areas and incomplete release of metal from the lattice have prevented the widespread application of these materials. Furthermore, we describe the preparation of thin perovskite films on stable supports by Atomic Layer Deposition (ALD) as a means for avoiding the limitations associated with bulk perovskites. Examples will be given that demonstrate many of the favorable properties of perovskite supports can be retained, while avoiding some of the shortcomings. Potential opportunities for using these materials are discussed.

36 MATERIALS SCIENCE↗

Very High Refractive Index Transition Metal Dichalcogenide Photonic Conformal Coatings by Conversion of ALD Metal Oxides

Materials for nanophotonic devices ideally combine ease of deposition, very high refractive index, and facile pattern formation through lithographic templating and/or etching. In this work, we present a scalable method for producing high refractive index WS 2 layers by chemical conversion of WO 3 synthesized via atomic layer deposition (ALD). These conformal nanocrystalline thin films demonstrate a surprisingly high index of refraction (n > 3.9), and structural fidelity compatible with lithographically defined features down to ~10 nm. Although this process yields highly polycrystalline films, the optical constants are in agreement with those reported for single crystal bulk WS 2 . Subsequently, we demonstrate three photonic structures - first, a two-dimensional hole array made possible by patterning and etching an ALD WO 3 thin film before conversion, second, an analogue of the 2D hole array first patterned into fused silica before conformal coating and conversion, and third, a three-dimensional inverse opal photonic crystal made by conformal coating of a self-assembled polystyrene bead template. Furthermore these results can be trivially extended to other transition metal dichalcogenides, thus opening new opportunities for photonic devices based on high refractive index materials.

36 MATERIALS SCIENCE↗

Improvement of (004) texturing by slow growth of Nd doped TiO{sub 2} films

In this work, we present preferred (004) texturing of sputter deposited titanium dioxide (TiO{sub 2}) films on glass substrates as a consequence of Nd doping at very slow growth rate. Nd concentration was varied from 0.0 to 2.0 atomic percent (at. %) in TiO{sub 2} thin films deposited under identical growth conditions, i.e., the growth rate of 0.6 A/s and at 500 Degree-Sign C. At 2 at. % Nd, complete texturing along (004) plane was observed, as indicated by the X-ray diffraction analyses. Morphology of the deposited TiO{sub 2} films from pure to 2 at. % Nd doped TiO{sub 2} films showed faceted to planar growth. Visualization of electrical and structural analysis (VESTA) software revealed that the change in the morphology was due to preferential growth in (004) orientation. Raman spectroscopy highlighted the phonon confinement in the Eg mode, and a red shift was observed due to an increase in the anti-symmetry in bonding with increased Nd concentration. XPS results confirmed the variation in oxygen vacancy concentration along with the reduction of Ti and Nd valance states with the change in the dopant concentration. Our experiments confirmed that the substitution of Nd at Ti sites was responsible for texturing in (004) orientation and this was possible by growing films at a very slow rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Al{sub 2}O{sub 3} multi-density layer structure as a moisture permeation barrier deposited by radio frequency remote plasma atomic layer deposition

Al{sub 2}O{sub 3} films deposited by remote plasma atomic layer deposition have been used for thin film encapsulation of organic light emitting diode. In this study, a multi-density layer structure consisting of two Al{sub 2}O{sub 3} layers with different densities are deposited with different deposition conditions of O{sub 2} plasma reactant time. This structure improves moisture permeation barrier characteristics, as confirmed by a water vapor transmission rate (WVTR) test. The lowest WVTR of the multi-density layer structure was 4.7 × 10{sup −5} gm{sup −2} day{sup −1}, which is one order of magnitude less than WVTR for the reference single-density Al{sub 2}O{sub 3} layer. This improvement is attributed to the location mismatch of paths for atmospheric gases, such as O{sub 2} and H{sub 2}O, in the film due to different densities in the layers. This mechanism is analyzed by high resolution transmission electron microscopy, elastic recoil detection, and angle resolved X-ray photoelectron spectroscopy. These results confirmed that the multi-density layer structure exhibits very good characteristics as an encapsulation layer via location mismatch of paths for H{sub 2}O and O{sub 2} between the two layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining the crystalline degree of silicon nanoclusters/SiO{sub 2} multilayers by Raman scattering

We use Raman scattering to investigate the size distribution, built-in strains and the crystalline degree of Si-nanoclusters (Si-nc) in high-quality Si-rich oxynitride/SiO{sub 2} multilayered samples obtained by plasma enhanced chemical vapor deposition and subsequent annealing at 1150 °C. An initial structural characterization of the samples was performed by means of energy-filtered transmission electron microscopy (EFTEM) and X-ray diffraction (XRD) to obtain information about the cluster size and the presence of significant amounts of crystalline phase. The contributions to the Raman spectra from crystalline and amorphous Si were analyzed by using a phonon confinement model that includes the Si-nc size distribution, the influence of the matrix compressive stress on the clusters, and the presence of amorphous Si domains. Our lineshape analysis confirms the existence of silicon precipitates in crystalline state, in good agreement with XRD results, and provides also information about the presence of a large compressive stress over the Si-nc induced by the SiO{sub 2} matrix. By using the Raman spectra from low temperature annealed samples (i.e., before the crystallization of the Si-nc), the relative scattering cross-section between crystalline and amorphous Si was evaluated as a function of the crystalline Si size. Taking into account this parameter and the integrated intensities for each phase as extracted from the Raman spectra, we were able to evaluate the degree of crystallization of the precipitated Si-nc. Our data suggest that all samples exhibit high crystalline fractions, with values up to 89% for the biggest Si-nc. The Raman study, supported by the EFTEM characterization, indicates that this system undergoes a practically abrupt phase separation, in which the precipitated Si-nanoclusters are formed by a crystalline inner part surrounded by a thin amorphous shell of approximately 1–2 atomic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A nitride-based epitaxial surface layer formed by ammonia treatment of silicene-terminated ZrB{sub 2}

We present a method for the formation of an epitaxial surface layer involving B, N, and Si atoms on a ZrB{sub 2}(0001) thin film on Si(111). It has the potential to be an insulating growth template for 2D semiconductors. The chemical reaction of NH{sub 3} molecules with the silicene-terminated ZrB{sub 2} surface was characterized by synchrotron-based, high-resolution core-level photoelectron spectroscopy and low-energy electron diffraction. In particular, the dissociative chemisorption of NH{sub 3} at 400 °C leads to surface nitridation, and subsequent annealing up to 830 °C results in a solid phase reaction with the ZrB{sub 2} subsurface layers. In this way, a new nitride-based epitaxial surface layer is formed with hexagonal symmetry and a single in-plane crystal orientation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding chemical and physical mechanisms in atomic layer deposition

Atomic layer deposition (ALD) is a powerful tool for achieving atomic level control in the deposition of thin films. However, several physical and chemical phenomena can occur which cause deviation from “ideal” film growth during ALD. Understanding the underlying mechanisms that cause these deviations is important to achieving even better control over the growth of the deposited material. Herein, we review several precursor chemisorption mechanisms and the effect of chemisorption on ALD growth. We then follow with a discussion on diffusion and its impact on film growth during ALD. Together, these two fundamental processes of chemisorption and diffusion underlie the majority of mechanisms which contribute to material growth during a given ALD process, and the recognition of their role allows for more rational design of ALD parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low temperature plasma enhanced atomic layer deposition of conducting zirconium nitride films using tetrakis (dimethylamido) zirconium and forming gas (5% H{sub 2} + 95% N{sub 2}) plasma

Zirconium nitride (ZrN) has the lowest bulk electrical resistivity and high thermal stability among group IV and V transition metal nitrides, which makes it a promising material for ULSI applications such as a diffusion barrier for Cu interconnects, contact metal in III-V semiconductor devices, and in high density memory structures. Plasma enhanced atomic layer deposition (PEALD) of conducting ZrN thin films using Zr[N(CH{sub 3}){sub 2}]{sub 4} and forming gas (5% H{sub 2} + 95% N{sub 2}) plasma is reported in this article. The growth per cycle (GPC) for every deposition was determined from analysis of dynamic in-situ spectroscopic ellipsometry (d-iSE) measurements. An experimental design is proposed for faster determination of ALD growth saturation curves. At substrate temperature of 150 °C, a GPC of 0.10 nm/cycle was observed for self-limiting ZrN PEALD growth. The electrical resistivity of ZrN films deposited on SiO{sub 2} substrate was found to be 559.5 ± 18.5 μΩ cm with negligible change in resistivity even after ∼1000 h exposure to air. The metallic behavior of our ZrN films was evident from the free electron dispersion component in dielectric response, the broad band of photoelectron emission across Fermi level and the positive temperature coefficient for resistivity of 0.0088/ °C.

36 MATERIALS SCIENCE↗

Atomic layer deposition of two dimensional MoS{sub 2} on 150 mm substrates

Low temperature atomic layer deposition (ALD) of monolayer to few layer MoS{sub 2} uniformly across 150 mm diameter SiO{sub 2}/Si and quartz substrates is demonstrated. Purge separated cycles of MoCl{sub 5} and H{sub 2}S precursors are used at reactor temperatures of up to 475 °C. Raman scattering studies show clearly the in-plane (E{sup 1}{sub 2g}) and out-of-plane (A{sub 1g}) modes of MoS{sub 2}. The separation of the E{sup 1}{sub 2g} and A{sub 1g} peaks is a function of the number of ALD cycles, shifting closer together with fewer layers. X-ray photoelectron spectroscopy indicates that stoichiometry is improved by postdeposition annealing in a sulfur ambient. High resolution transmission electron microscopy confirms the atomic spacing of monolayer MoS{sub 2} thin films.

36 MATERIALS SCIENCE↗

Plasmon resonances in a two-dimensional lattice of metal particles in a dielectric layer: Structural and polarization properties

The results of experimental and theoretical investigation of planar two-dimensional (2D) samples of plasmon structures are presented. The samples represent a 2D lattice of gold nanoparticles embedded in a thin dielectric layer and are studied by atomic force microscopy (AFM) and optical methods. Absorption bands associated with the excitation of various surface plasmon resonances (SPR) are interpreted. It is found that the choice of the mutual orientation of the polarization plane and the edge of the unit cell of the 2D lattice determines the spectral position of the lattice surface plasmon resonance (LSPR) related to the lattice period. It is shown that the interaction of p- and s-polarized light with a 2D lattice of nanoparticles is described by the dipole–dipole interaction between nanoparticles embedded in a medium with effective permittivity. Analysis of the spectra of ellipsometric parameters allows one to determine the amplitude and phase anisotropy of transmission, which is a consequence of the imperfection of the 2D lattice of samples.

36 MATERIALS SCIENCE↗

Ultra-high Q alumina optical microresonators in the UV and blue bands

UV and visible photonics enable applications ranging from spectroscopic sensing to communication and quantum information processing. Photonics structures in these wavelength regimes, however, tend to experience higher loss than their IR counterpart. Particularly in the near-UV band, on-chip optical microresonators have not yet achieved a quality factor beyond 1 million. Here, we report ultra-low-loss photonic waveguides and resonators patterned from alumina thin films prepared by a highly scalable atomic layer deposition process. We demonstrate ultra high Q factor of 1.5×10 6 at 390 nm, a record value at UV bands, and 1.9×10 6 at 488.5 nm.

He, Chengxing (ORCID:0000000347166078)↗

Impact of Annealing on Superconducting Properties of Tantalum Thin Films

The pursuit for higher-coherence superconducting qubits has led to the adoption of new materials and innovative fabrication techniques. Among the commonly used superconducting materials, tantalum-based or tantalum-capped superconducting qubits have demonstrated the longest lifetimes, outperforming niobium devices even in the presence of their native oxides. Given the losses introduced by the surface oxide, one method to further improve performance is to reduce or eliminate the native oxide on tantalum through UHV annealing. In this work, we examine the effect of dissolved oxygen as a function of annealing temperature on the superconducting properties of tantalum thin films. Dissolved oxygen is quantified using atom probe tomography (APT) and secondary ion mass spectrometry (TOF-SIMS) and correlated with electromagnetic transport measurements performed using a Physical Property Measurement System (PPMS). This study observes that annealing decomposes the native oxide and drives oxygen diffusion into the film matrix. Increasing oxygen content decreases the superconducting transition temperature (Tc) and the residual resistivity ratio (RRR). The critical field decreases with the incorporation of oxygen, while the film’s coherence length decreases relatively by 5%. These results, as well as findings from ongoing studies linking fabrication processes to the structural and chemical properties of the superconducting film and Josephson junction, provide insight into effective strategies for improving the performance of superconducting devices.

Shinde, Maithilee [IIT, Chicago; Fermilab]↗