Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

pCAM precursor produced from electroextraction technology and its application in synthesis of NMC 811 cathode material

The synthesis and characterization of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (LNMC811) cathodes produced from recycled hydroxide precursors obtained from spent lithium-ion batteries is evaluated. Two precursor batches (Sample 1 and Sample 2) are prepared using modified recycling processes to examine how residual impurities and processing conditions influence the properties of the regenerated materials. Structural and compositional characterization by X-ray diffraction, ICP and SEM shows that the recycled precursors exhibit layered hydroxide structures containing both α Ni(OH) 2 and β Ni(OH) 2 phases. Trace impurities including sodium, boron, and aluminum are detected and partially mitigated during processing, with boron found to play a beneficial role in electrochemical behavior. Following lithiation with lithium carbonate and lithium hydroxide at 800 °C under an oxygen rich atmosphere, the resulting LNMC811 materials show electrochemical performance comparable to conventionally synthesized cathodes. Sample 2, which contains higher boron levels and improved cation ordering, delivers an initial discharge capacity of 174 mAh g -1 and retains more than 93 percent of its capacity after 50 cycles. The stable cycling behavior and structural integrity of these materials demonstrate that recycled precursors can be converted into high performance layered cathodes and support recycling as a practical and sustainable route for lithium-ion battery manufacturing.

25 ENERGY STORAGE↗

LiMn{sub 2}O{sub 4} nanoparticles anchored on graphene nanosheets as high-performance cathode material for lithium-ion batteries

Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite has been successfully synthesized by a one-step hydrothermal method without post-heat treatment. In the nanocomposite, LiMn{sub 2}O{sub 4} nanoparticles of 10–30 nm in size are well crystallized and homogeneously anchored on the graphene nanosheets. The graphene nanosheets not only provide a highly conductive matrix for LiMn{sub 2}O{sub 4} nanoparticles but also effectively reduce the agglomeration of LiMn{sub 2}O{sub 4} nanoparticles. The nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite exhibited greatly improved electrochemical performance in terms of specific capacity, cycle performance, and rate capability compared with the bare LiMn{sub 2}O{sub 4} nanoparticles. The superior electrochemical performance of the nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets nanocomposite makes it promising as cathode material for high-performance lithium-ion batteries. - Graphical abstract: Nanocrystalline LiMn{sub 2}O{sub 4}/graphene nanosheets (GNS) nanocomposite exhibit superior cathode performance for lithium-ion batteries compared to the bare LiMn{sub 2}O{sub 4} nanoparticles. Display Omitted - Highlights: • LiMn{sub 2}O{sub 4}/graphene nanocomposite is synthesized by a one-step hydrothermal method. • LiMn{sub 2}O{sub 4} nanoparticles are uniformly anchored on the graphene nanosheets. • The nanocomposite exhibits excellent cathode performance for lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphological effects on the electrochemical performance of lithium-rich layered oxide cathodes, prepared by electrospinning technique, for lithium-ion battery applications

Li-rich Li{sub 1.2}Ni{sub 0.17}Co{sub 0.17}Mn{sub 0.5}O{sub 2} cathode materials were synthesized by electrospinning technique with different polymers, and their structural, morphological, and electrochemical performances were investigated. It was found that the electrospinning process leads to the formation of a fiber and flower-like morphology, by using different polymers and heat treatment conditions. The nanostructured morphology provided these materials with high initial discharge capacity. The cycling stability was improved with agglomerated nano-particles, as compared with porous materials. - Highlights: • Fiber and flower-like Li-rich cathode was synthesized by simple electrospinning. • Polymer dependent morphology and electrochemical performance was investigated. • Well-organized porous structure facilitates the diffusion of lithium ions. • Technique could be applicable to other cathode materials as well.

36 MATERIALS SCIENCE↗

Synthesis and properties of Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} perovskite cathode material for intermediate temperature solid-oxide fuel cells

A highly stable perovskite cathode material, Ba{sub 0.5}Sr{sub 0.5}(Co{sub 0.6}Zr{sub 0.2})Fe{sub 0.2}O{sub 3-{delta}} (BSCZF) for intermediate temperature solid-oxide fuel cells (IT-SOFCs) was synthesized via the improved EDTA-citric acid complexing technique combined with high-temperature sintering. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectra (EIS) measurements. An electrolyte-supported BSCZF/SDC/Ni-SDC fuel cell was fabricated to evaluate the performance of the material. The XRD study indicates that the sintering temperature higher than 950 deg. C is sufficient to the formation of clean single BSCZF perovskite phase. Due to the incorporation of Zr ions, BSCZF perovskite exhibit lower electrical conductivity with higher activation energy but higher structural stability than the Ba{sub 0.5}Sr{sub 0.5}Co{sub 0.8}Fe{sub 0.2}O{sub 3-{delta}} (BSCF) parent oxide. The maximum electrical conductivity of BSCZF attains 16.9 S cm{sup -1} at around 540 deg. C. Impedance spectra showed that the ASRs of BSCZF cathode on samaria doped ceria (Ce{sub 0.8}Sm{sub 0.2}O{sub 1.9}, SDC) electrolyte are low but are still slightly larger than those of BSCF at similar conditions. The BSCZF/SDC/Ni-SDC cell exhibited a stable output with the maximum power densities of 30, 75, 139 and 241 mW cm{sup -2} at 550, 600, 650 and 700 deg. C, respectively. Due to the high electrochemical performances as well as the excellent stability, BSCZF perovskite may be an attractive cathode material for IT-SOFCs.

36 MATERIALS SCIENCE↗

Electrosprayed polyaniline as cathode material for lithium secondary batteries

Doped polyaniline with LiPF{sub 6} is electrosprayed onto aluminum foil using electrospinning technique, and evaluated as cathode active material for application in room-temperature lithium batteries. Doping level is characterized using FTIR and UV-vis spectroscopy. In FTIR Spectra, characteristic peaks of PANI are shifted to lower bands as a result of doping which indicates the effectiveness of doping. Doping level is also confirmed by UV-vis spectra. Surface morphology of the cathode is studied using scanning electron microscope. Electrochemical evaluation of the cell using electrosprayed PANI as cathode show good cycling properties. The cell delivers a high discharge value of 142.5 mAh/g which is about 100% of theoretical capacity, and the capacity is lowered during cycle and reached 61% of theoretical capacity after 50 cycles. The cell delivers a stable but lower discharge capacity at higher C-rates.

36 MATERIALS SCIENCE↗

High rate performances of the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} synthesized using low temperature hydroxide precipitation

Graphical abstract: A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize a cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. The charge-discharge tests were performed at 1000 mA g{sup -1} between 2.5 and 4.5 V and the discharge capacity is about 160 mAh g{sup -1}. The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance. Highlights: {yields} A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize a novel cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. {yields} The charge-discharge tests were performed at higher current as 5 C between 2.5 and 4.5 V. {yields} The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance. -- Abstract: A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. The crystal structure and morphology of the prepared powder have been characterized by X-ray diffraction and Scan electron microscope, respectively. The charge-discharge tests were performed between 2.5 and 4.5 V. The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance and the initial discharge capacity is about 160 mAh g{sup -1} at 5 C. Powder X-ray diffraction and Scan electron microscope results reveal that the excellent electrochemical performances should be ascribed to the lower precursor reaction temperature, the lower degree of cation mixing and analogous spherical small particles, which can improve the transfer of Li ions and electrons. All these results indicate that this material has potential application in lithium-ion batteries.

36 MATERIALS SCIENCE↗

Preparation and electrochemical performance of sulfur-alumina cathode material for lithium-sulfur batteries

Highlights: ► Micron-sized alumina was synthesized as adsorbent for lithium-sulfur batteries. ► Sulfur-alumina material was synthesized via crystallizing nucleation. ► The Al{sub 2}O{sub 3} can provide surface area for the deposition of Li{sub 2}S and Li{sub 2}S{sub 2}. ► The discharge capacity of the battery is improved during the first several cycles. - Abstract: Nano-sized sulfur particles exhibiting good adhesion with conducting acetylene black and alumina composite materials were synthesized by means of an evaporated solvent and a concentrated crystallization method for use as the cathodes of lithium-sulfur batteries. The composites were characterized and examined by X-ray diffraction, environmental scanning electron microscopy and electrochemical methods, such as cyclic voltammetry, electrical impedance spectroscopy and charge–discharge tests. Micron-sized flaky alumina was employed as an adsorbent for the cathode material. The initial discharge capacity of the cathode with the added alumina was 1171 mAh g{sup −1}, and the remaining capacity was 585 mAh g{sup −1} after 50 cycles at 0.25 mA cm{sup −2}. Compared with bare sulfur electrodes, the electrodes containing alumina showed an obviously superior cycle performance, confirming that alumina can contribute to reducing the dissolution of polysulfides into electrolytes during the sulfur charge–discharge process.

36 MATERIALS SCIENCE↗

Comparisons of short carbon nanotubes containing conductive additives of cathode for lithium ion batteries

Graphical abstract: - Highlights: • Short carbon nanotubes (SCNT) containing conductive additives were used. • SCNT/graphite powder (GP) mixture is better than SCNT/mesoporous carbon mixture. • SCNT connect many isolated GP particles to form a more valid conductive network. • SCNT absorb some electrolyte solution allowing quick electrochemical reactions. - Abstract: Short carbon nanotubes (SCNT) containing conductive additives, i.e. SCNT/graphite powder (GP) mixture (SCNTGP) and SCNT/mesoporous carbon (MC) mixture (SCNTMC) were employed as conductive additives for LiCoO{sub 2} cathode. GP and MC have similar particle size, but GP has lower specific surface area and higher electronic conductivity. Electrochemical measurements indicate that SCNTGP is more effective in improving the electrochemical performance of LiCoO{sub 2} composite cathode under the same conditions. The reason is described as follows. SCNT connect the isolated GP particles to form a more valid conductive network. In addition, SCNT has a certain specific mesoporous surface area, which can absorb some electrolyte solution and then provide buffer lithium ions for quick electrochemical reactions. Consequently, the combination of these two factors would be responsible to the improvement in the electrochemical performance of the SCNTGP loaded cathode.

36 MATERIALS SCIENCE↗

One-step synthesis of dense and spherical nanostructured V{sub 2}O{sub 5} particles for cathode of lithium batteries and their electrochemical properties

Graphical abstract: Dense and spherical nanostructured V{sub 2}O{sub 5} particles. - Highlights: • One-step synthesis of dense, spherical, nanostructured V{sub 2}O{sub 5} particles was achieved. • As-prepared V{sub 2}O{sub 5} consists of primary particles of approximately 100 nm size. • The electrochemical performance of spherical nanostructured V{sub 2}O{sub 5} was investigated. • The potential range affects to the discharge capacity and cyclability of V{sub 2}O{sub 5}. - Abstract: A one-step synthesis of V{sub 2}O{sub 5} was directly achieved via ultrasonic spray pyrolysis at various synthesis temperatures ranging from 500 to 700 °C. The V{sub 2}O{sub 5} prepared at 500 °C is dense and spherical nanostructured particles, which consist of primary particles with a size of approximately 100 nm. The morphology change remarkably progresses with increasing synthesis temperatures from 500 to 700 °C. The electrochemical performance of a cathode comprising dense and spherical nanostructured V{sub 2}O{sub 5} particles prepared at 500 °C was investigated by galvanostatic discharge–charge cycling and cyclic voltammetry. From the discharge–charge cycling, the initial discharge capacity of the cathode was found to be about 403 mAh g{sup −1} in the potential range of 1.5–4.0 V, but it decreased owing to inherent phase changes with repeated cycling. The potential range significantly affects the cycle performance, and the V{sub 2}O{sub 5} cathode showed good cycle performance in the potential range of 2.5–4.0 V.

36 MATERIALS SCIENCE↗

Novel mixed hydroxy-carbonate precursor assisted synthetic technique for LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials

Highlights: • MHC method used to overcome drawbacks of solid state synthesized materials. • Least cation mixing, phase purity, good reversibility and rate capability achieved. • XRD I {sub 0} {sub 0} {sub 3}/I{sub 1} {sub 0} {sub 4} factor, indicating electrochemical reactivity is maximum at 1.6984. • Li/LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cell delivered an initial discharge capacity of 175 mAh g{sup −1}. - Abstract: Novel mixed hydroxy-carbonate (MHC) precursors were used to synthesis technique of LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode material. The powder X-ray diffraction (XRD) pattern of the synthesized LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials exhibited a hexagonal cell with a = 2.8535 Å and c = 14.2040 Å. Fourier transform infrared spectroscopy (FT-IR) spectrum of MHC and LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} consistent with vibration modes of functional group. Presence of sub-micrometer particle size (200 nm) and highly crystalline morphology confirmed using scanning electron microscopy (SEM). X-ray photoelectron spectroscopy (XPS) suggested that oxidation state of the transition metals; Ni in +2, Mn in +4 and Co in +3 states, respectively in LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cathode materials. Cyclic voltammograms (CV) revealed only one major redox couple at 4 V and suggested the absence of structural transitions from hexagonal to monoclinic structure. The Li vs. LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} cell delivered an initial discharge capacity of 175 mAh g{sup −1} in the voltage range 2.5–4.6 V @ 0.1 C.

36 MATERIALS SCIENCE↗

Nanoparticle-assembled LiMn{sub 2}O{sub 4} hollow microspheres as high-performance lithium-ion battery cathode

Highlights: • The LiMn{sub 2}O{sub 4} hollow microspheres are assembled by LiMn{sub 2}O{sub 4} octahedral nanoparticles. • The LiMn{sub 2}O{sub 4} hollow microspheres exhibit larger diffusion coefficient and better rate performance. • The LiMn{sub 2}O{sub 4} hollow microspheres display longer cycling stability. - Abstract: Spinel LiMn{sub 2}O{sub 4} is an attractive cathode material for rechargeable lithium-ion batteries. However, its cycling and rate performance need further improvement. Herein, we present a novel LiMn{sub 2}O{sub 4} hollow microsphere cathode fabricated via a simple solid-state reaction utilizing MnO{sub 2} hollow microspheres and LiOH·H{sub 2}O as the reactants. Interestingly, the as-prepared LiMn{sub 2}O{sub 4} hollow microspheres are assembled by LiMn{sub 2}O{sub 4} octahedral nanoparticles with exposed {111} planes, exhibiting abundant void spaces for the stress buffering and larger diffusion coefficient (1.570 × 10{sup −7} cm{sup 2} s{sup −1}) for fast lithium ion transfer as compared to the simply aggregated LiMn{sub 2}O{sub 4} nanoparticles. As a result, the LiMn{sub 2}O{sub 4} hollow microspheres exhibit much improved cycling stability and deliver a specific discharge capacity of 86.3 mAh g{sup −1} at a high rate of 10C, higher than that of the aggregated LiMn{sub 2}O{sub 4} (73.9 mAh g{sup −1}). Our work suggests that the electrochemical performance of LiMn{sub 2}O{sub 4} cathode can be manipulated by the design of unique hollow sphere structure.

36 MATERIALS SCIENCE↗

Integrated carbon cloth supported LiFePO4/N-C films as high-performance cathode for lithium ion batteries

Highlights: • Construct carbon cloth supported LiFePO{sub 4}/N-C films via hydrothermal. • The LiFePO{sub 4}/N-C films show high capacity and good cycles. • Carbon cloth and N-C layer work together to provide fast ion/electron transfer. - Abstract: Fabricating advanced cathode is critical for the development of high-performance lithium ion batteries (LIBs). In this work, we develop a facile hydrothermal method for construction of LiFePO{sub 4}/N-C films on the carbon cloth forming integrated binder-free cathode. The LiFePO{sub 4}/N-C films are composed of interconnected nanoscale LiFePO{sub 4}/N-C particles with diameters of 100–200 nm. High porosity and good adhesion are obtained in the carbon cloth supported LiFePO{sub 4}/N-C films (CC + LiFePO{sub 4}/N-C films). As compared to the LiFePO{sub 4}/C powder nanoparticles, the CC + LiFePO{sub 4}/N-C films show much better electrochemical properties with higher capacities, smaller polarization and better high-rate cycling life. A high capacity of 169 mAh g{sup −1} at 1C is achieved for the carbon cloth supported LiFePO{sub 4}/N-C films, superior to the LiFePO{sub 4}/C powder nanoparticles (154 mAh g{sup −1} at 5C). This enhancement is owing to the unique integrated porous architecture and N-C coating. Our work shows a new way to construct integrated cathode for application in LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chloride ion-doped polypyrrole nanocomposite as cathode material for rechargeable magnesium battery

Highlights: • Chloride ion-doped polypyrrole nanocomposite is firstly developed as new cathode for rechargeable magnesium battery. • Reversible redox reactions of nitrogen species in nanostructured polypyrrole in RMB system are proved. • More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. - Abstract: We report a chloride ion-doped polypyrrole/carbon nanotube (PPyCl/CNTs) nanocomposite as new cathode material for rechargeable magnesium battery. The PPyCl/CNTs nanocomposite with amorphous structure, uniform chlorine distribution and large specific surface area shows reversible electrochemical energy storage upon redox reaction of nitrogen species. The structural configuration of PPyCl by the incorporation of CNTs contributes to significant improvement in the electrochemical performance. More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. This study offers a promising way for designing new cathode for rechargeable magnesium batteries.

25 ENERGY STORAGE↗

Graphene foam supported LiFePO4 nanosheets composite as advanced cathode for lithium ion batteries

Highlights: • Construct self-supported porous LiFePO{sub 4}/GF composite film. • Porous LiFePO{sub 4}/GF composite film show superior cycling life. • Hierarchical porous nanosheets structure boost fast electron/ion transfer. - Abstract: Smart design of advanced cathode plays a significantly important role for the development of high-performance lithium ion batteries (LIBs). In this work, we synthesized a new kind of LiFePO{sub 4}/Graphene foam (LFP/GF) integrated binder-free cathode via chemical vapor deposition (CVD) + hydrothermal method. The LFP is composed of interconnected LiFePO{sub 4} nanosheets with numerous nanopores of 50–500 nm. High porosity and good adhesion endow LiFePO{sub 4}/GF film superior electrochemical properties with remarkable high-rate capacities, small polarization and stable cycling life. A high-rate capacity of 110 mAh g{sup −1} at 24 C is obtained for the LiFePO{sub 4}/GF composite. Moreover, a high capacity retention of 95% is acquired after 160 cycles. This enhancement is due to the unique integrated porous LiFePO{sub 4} nanosheets and good support of graphene foam providing fast ion/electron transfer. Our work displays a new insight in constructing integrated cathode for application in high-performance LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Property optimization for strontium-rich lanthanum chromium ferrite cathodes: A demonstration of lanthanide replacement effect

Highlights: • The structure of Ln{sub 0.3}Sr{sub 0.7}Fe{sub 0.7}Cr{sub 0.3}O{sub 3-δ} (Ln = La, Pr, Nd, Sm) was investigated. • The electrical conducting, thermal expansion and catalytic properties were inspected. • The properties changes with the size of the lanthanide cations were diagnosed. • Modulating the A-site dimension was effective for optimizing the overall properties. • Sm{sub 0.3}Sr{sub 0.7}Fe{sub 0.7}Cr{sub 0.3}O{sub 3-δ} was identified to be a promising IT-SOFC cathode material. - Abstract: The structure, electrical conducting, thermal expansion and electrocatalytic properties of Ln{sub 0.3}Sr{sub 0.7}Fe{sub 0.7}Cr{sub 0.3}O{sub 3-δ} (Ln = La, Pr, Nd, Sm) perovskites were investigated to evaluate their potential for cathodes of intermediate temperature solid oxide fuel cells (IT-SOFCs). Reducing the size of the lanthanide cations enhanced the deformation of the perovskite structures and decreased the dimension of the primitive unit cells. Meanwhile, the oxygen nonstoichiometry (δ) values at elevated temperatures slightly increased. The electrical conductivity degraded with smaller lanthanide cation sizes, while the thermal expansion coefficients (TECs) tended to decrease. These property changes were diagnosed with respect to the corresponding structural evolutions. Sm{sub 0.3}Sr{sub 0.7}Fe{sub 0.7}Cr{sub 0.3}O{sub 3-δ} was identified to be the optimal composition after an overall property assessment. This composition exhibited an average TEC (∼14 × 10{sup −6} K{sup −1} between 40 and 1000 °C) compatible with IT-SOFC electrolytes, eligible electrical conductivity and good electrocatalytic activity. The good overall properties of Sm{sub 0.3}Sr{sub 0.7}Fe{sub 0.7}Cr{sub 0.3}O{sub 3-δ} demonstrate that this composition is a promising cathode material for IT-SOFCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realizing continuous cation order-to-disorder tuning in a class of high-energy spinel-type Li-ion cathodes

Conventional Li-ion cathode materials are dominated by well-ordered structures, in which Li and transition metals occupy distinct crystallographic sites. Here, we show in this paper that profoundly new degrees of freedom for the optimization of electrochemical properties may be accessed if controllable cation disorder is introduced. In a class of high-capacity spinel-type cathode materials, we identify cation to anion ratio in synthesis as a key parameter for tuning the structure continuously from a well-ordered spinel, through a partially ordered spinel, to rocksalt. We find that the varying degree of cation disorder modifies the voltage profile, rate capability, and charge-compensation mechanism in a rational and predictable way. Our results indicate that spinel-type order is most beneficial for achieving high-rate performance as long as the cooperative 8a to 16c phase transition is suppressed, while more rocksalt-like disorder facilitates O redox, which can increase capacity. Our findings reveal an important tuning handle for achieving high energy and power in the vast space of partially ordered cathode materials.

25 ENERGY STORAGE↗

Stabilizing Ni-rich layered cathode for high-voltage operation through hierarchically heterogeneous doping with concentration gradient

High-nickel LiNi x Mn y Co 1-x-y O 2 (NMC) cathodes have demonstrated superior energy density, yet their stability is compromised under high voltage conditions. To address this, here we propose a strategy of heterogeneous doping with a concentration gradient, specifically through Sr–Zr co-modification. We synthesized Ni-rich NMC particles featuring several micron-sized secondary particles composed of micron-sized primary grains. This design aims to harness the structural robustness of single-crystalline grains and the favorable diffusion kinetics of polycrystalline secondary particles. Systematic characterization using a combination of electrochemical measurements and synchrotron analytics reveals an intriguing pattern of hierarchically heterogeneous Sr–Zr co-doping. It demonstrates a depth-dependent concentration gradient at the secondary particle level and competing dopant segregation over the buried grain boundaries. This unique characteristic creates opportunities for enhancing battery performance, particularly by optimizing precursors and implementing advanced modulation techniques. We also investigate the dissolution and precipitation of the cathode's transition metal cations upon high-voltage cycling. These insights suggest that a tailored compositional variation can be a viable approach to effectively design the next-generation high-Ni NMC cathode materials for high-voltage lithium batteries.

36 MATERIALS SCIENCE↗

Current Status and Future Directions of All-Solid-State Batteries with Lithium Metal Anodes, Sulfide Electrolytes, and Layered Ternary Oxide Cathodes

All-solid-state batteries (ASSBs) offer great promise as a next-generation energy storage technology with higher energy density, wider operating temperature range, and improved safety for electric vehicles. ASSBs employing lithium metal anodes (Li), sulfide-based solid-state electrolytes (SSE), and Ni-rich layered transition metal oxide cathodes (LiMO 2 , M = Ni, Mn, Co, Al) are particularly promising due to its superior electrochemical performance compared to other solid-electrolyte systems. However, the battery cycle life at high cathode mass loading and high current is still limited because the failure mechanism is not fully understood. Lithium dendrite growth at the anode or inside a solid electrolyte still represents as a serious risk of cell failure. Interfacial resistance increases attributed to electrolyte decomposition and interfacial void formation at both cathode–electrolyte and anode–electrolyte interfaces lead to gradual capacity fading. In this Review, we present the fundamental challenges and recent scientific understandings of each component in ASSBs. The novel diagnostic tools for these components, especially the interfaces buried under the surface that are often hard for characterization are mainly examined. Lastly, we offer a perspective for future research directions. We hope this Review will provide a timely snapshot of state-of-the-art research progress in ASSBs to accelerate the development of ASSBs.

25 ENERGY STORAGE↗