Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

A fast, matrix-based method to perform omnidirectional pressure integration

Abstract Experimentally-measured pressure fields play an important role in understanding many fluid dynamics problems. Unfortunately, pressure fields are difficult to measure directly with non-invasive, spatially resolved diagnostics, and calculations of pressure from velocity have proven sensitive to error in the data. Omnidirectional line integration methods are usually more accurate and robust to these effects as compared to implicit Poisson equations, but have seen slower uptake due to the higher computational and memory costs, particularly in 3D domains. This paper demonstrates how omnidirectional line integration approaches can be converted to a matrix inversion problem. This novel formulation uses an iterative approach so that the boundary conditions are updated each step, preserving the convergence behavior of omnidirectional schemes while also keeping the computational efficiency of Poisson solvers. This method is implemented in Matlab and also as a GPU-accelerated code in CUDA-C++. The behavior of the new method is demonstrated on 2D and 3D synthetic and experimental data. Three-dimensional grid sizes of up to 125 million grid points are tractable with this method, opening exciting opportunities to perform volumetric pressure field estimation from 3D PIV measurements.

42 ENGINEERING↗

On the consistency of warm inflation

Conditions are obtained for the existence of a warm inflationary attractor in the system of equations describing an inflaton coupled to radiation. These conditions restrict the temperature dependence of the dissipative terms and the size of thermal corrections to the inflaton potential, as well as the gradient of the inflaton potential. When these conditions are met, the evolution approaches a slow-roll limit and only curvature fluctuations survive on super-horizon scales. Formulae are given for the spectral indices of the density perturbations and the tensor/scalar density perturbation amplitude ratio in warm inflation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying the 'naturalness' of the curvaton model

We investigate the probability of obtaining an observable curvature perturbation, using as an example the minimal curvaton-higgs (MCH) model. We determine ''probably observable'' and ''probably excluded'' regions of parameter space assuming generic initial conditions and applying a stochastic approach for the curvaton's evolution during inflation. Inflation is assumed to last longer than the N{sub obs} ≅ 55 observable e-folds, and the total number of e-folds of inflation determines the particular ranges of parameters that are probable. For the MCH model, these ''probably observable'' regions always lie within the range 8 × 10{sup 4} GeV ≤ m{sub σ} ≤ 2 × 10{sup 7} GeV, where m{sub σ} is the curvaton mass, and the Hubble scale at horizon exit is chosen as H{sub *} = 10{sup 10} GeV. Because the ''probably observable'' region depends on the total duration of inflation, information on parameters in the Lagrangian from particle physics and from precision CMB observations can therefore provide information about the total duration of inflation, not just the last N{sub obs} e-folds. This method could also be applied to any model that contains additional scalar fields to determine the probability that these scalar fields contribute to the curvature perturbation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CMB hemispherical asymmetry: long mode modulation and non-Gaussianity

The observed hemispherical asymmetry in CMB map can be explained by modulation from a long wavelength super horizon mode which non-linearly couples to the CMB modes. We address the criticism in [1] about the role of non-Gaussianities in squeezed and equilateral configurations in generating hemispherical asymmetry from the long mode modulation. We stress that the modulation is sensitive to the non-Gaussianity in the squeezed limit. In addition, we demonstrate the validity of our approach in providing a consistency condition relating the amplitude of dipole asymmetry to f{sub NL} in the squeezed limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of functional genomics for domestication of novel non-model microbes

Abstract With the expansion of domesticated microbes producing biomaterials and chemicals to support a growing circular bioeconomy, the variety of waste and sustainable substrates that can support microbial growth and production will also continue to expand. The diversity of these microbes also requires a range of compatible genetic tools to engineer improved robustness and economic viability. As we still do not fully understand the function of many genes in even highly studied model microbes, engineering improved microbial performance requires introducing genome-scale genetic modifications followed by screening or selecting mutants that enhance growth under prohibitive conditions encountered during production. These approaches include adaptive laboratory evolution, random or directed mutagenesis, transposon-mediated gene disruption, or CRISPR interference (CRISPRi). Although any of these approaches may be applicable for identifying engineering targets, here we focus on using CRISPRi to reduce the time required to engineer more robust microbes for industrial applications. One-Sentence Summary The development of genome scale CRISPR-based libraries in new microbes enables discovery of genetic factors linked to desired traits for engineering more robust microbial systems.

59 BASIC BIOLOGICAL SCIENCES↗

Understanding the nature of mean-field semiclassical light-matter dynamics: An investigation of energy transfer, electron-electron correlations, external driving, and long-time detailed balance

Semiclassical electrodynamics (with quantum matter plus classical electrodynamics fields) is an appealing approach for studying light-matter interactions, especially for realistic molecular systems. However, there is no unique semiclassical scheme. On the one hand, intermolecular interactions can be described instantaneously by static two-body interactions connecting two different molecules, while a classical transverse E field acts as a spectator at short distance; we will call this Hamiltonian no. I. On the other hand, intermolecular interactions can also be described as effects that are mediated exclusively through a classical one-body Ε field without any quantum effects at all (assuming we ignore electronic exchange); we will call this Hamiltonian no. II. Moreover, one can also mix these two different Hamiltonians into a third, hybrid Hamiltonian, which preserves quantum electron-electron correlations for lower excitations but describes higher excitations in a mean-field way. To investigate which semiclassical scheme is most reliable for practical use, here we study the real-time dynamics of a minimalistic many-site model—a pair of identical two-level systems (TLSs)—undergoing either resonance energy transfer (RET) or collectively driven dynamics. While both approaches (no. 1 and no. 2) perform reasonably well when there is no strong external excitation, we find that no single approach is perfect for all conditions (and all methods fail when a strong external field is applied). Each method has its own distinct problems: Hamiltonian no. I performs best for RET but behaves in a complicated manner for driven dynamics; Hamiltonian no. II is always stable, but obviously fails for RET at short distances. One key finding is that, for externally driven dynamics, a full configuration-interaction description of Hamiltonian no. I strongly overestimates the long-time electronic energy, highlighting the not obvious fact that, if one plans to merge quantum molecules with classical light, a full, exact treatment of electron-electron correlations can actually lead to worse results than a simple mean-field electronic structure treatment. Future work will need to investigate (i) how these algorithms behave in the context of more than a pair of TLSs and (ii) whether or not these algorithms can be improved in general by including crucial aspects of spontaneous emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual-cone variational calculation of the two-electron reduced density matrix

The computation of strongly correlated quantum systems is challenging because of its potentially exponential scaling in the number of electron configurations. Variational calculation of the two-electron reduced density matrix (2-RDM) without the many-electron wave function exploits the pairwise nature of the electronic Coulomb interaction to compute a lower bound on the ground-state energy with polynomial computational scaling. Recently, a dual-cone formulation of the variational 2-RDM calculation was shown to generate the ground-state energy, albeit not the 2-RDM, at a substantially reduced computational cost, especially for higher $\textit{N}$-representability conditions such as the T2 constraint. Here we generalize the dual-cone variational 2-RDM method to compute not only the ground-state energy but also the 2-RDM. The central result is that we can compute the 2-RDM from a generalization of the Hellmann-Feynman theorem. Specifically, we prove that in the Lagrangian formulation of the dual-cone optimization the 2-RDM is the Lagrange multiplier. Further, we apply the method to computing the energies and properties of strongly correlated electrons—including atomic charges, electron densities, dipole moments, and orbital occupations—in an illustrative hydrogen chain and the nitrogen-fixation catalyst FeMoco. The dual variational computation of the 2-RDM with T2 or higher N -representability conditions provides a polynomially scaling approach to strongly correlated molecules and materials with significant applications in atomic and molecular and condensed-matter chemistry and physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of non-Gaussian quantum fluctuations in neutrino entanglement

The flavor evolution of neutrinos in environments with large neutrino number densities is an open problem at the nexus of astrophysics and neutrino flavor physics. Among the many unanswered questions pertaining to this problem, it remains to be determined whether neutrino-neutrino coherent scattering can give rise to nontrivial quantum entanglement among neutrinos, and whether this can affect the flavor evolution in a meaningful way. To gain further insight into this question, here we study a simple system of two interacting neutrino beams and obtain the exact phase space explored by this system using the Husimi quasiprobability distribution. We observe that the entanglement induced by the coupling leads to strong delocalization in phase-space with largely non-Gaussian quantum fluctuations. The link between the neutrino entanglement and quantum fluctuations is illustrated using the one- and two-neutrino entropy. In addition, we propose an approximate phase-space method to describe the interacting neutrinos problem, where the exact evolution is replaced by a set of independent mean-field evolutions with a statistical sampling of the initial conditions. The phase-space approach provides a simple and accurate method to describe the gross features of the neutrino entanglement problem. Applications are shown using time-independent and time-dependent Hamiltonians in the nonadiabatic regime.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Distribution Transformer Health Monitoring using Smart Meter Data

The distribution electric grid has become a highly complex and intelligent network with changing load and customer types. This has generated unprecedented challenges and opportunities for utility companies–opportunities especially in the area of asset health/performance management. Moreover, several utilities are increasingly moving from the traditional reactive and time-based asset monitoring approach to a more proactive condition based method. However, this needs to be done in a low-cost and efficient manner. Here, this paper explores how existing sensor infrastructure such as smart meters can be utilized to provide utility operators with more visibility into the health and operation of their assets. The paper focuses primarily on service transformers.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Tri-Level Linear Programming Model for Automatic Load Shedding Using Spectral Clustering

Traditional load shedding schemes can be inadequate in grids with high renewable penetration, leading to unstable events and unnecessary grid islanding. Although for both manual and automatic operating modes load shedding areas have been predefined by grid operators, they have remained fixed, and may be sub-optimal due to dynamic operating conditions. In this work, a distributed tri-level linear programming model for automatic load shedding to avoid system islanding is presented. Preventing islanding is preferred because it reduces the need for additional load shedding besides the disconnection of transmission lines between islands. This is crucial as maintaining the local generation-demand balance is necessary to preserve frequency stability. Furthermore, uneven distribution of generation resources among islands can lead to increased load shedding, causing economic and reliability challenges. This issue is further compounded in modern power systems heavily dependent on non-dispatchable resources like wind and solar. The upper-level model uses complex power flow measurements to determine the system areas to shed load depending on actual operating conditions using a spectral clustering approach. The mid-level model estimates the area system state, while the lower-level model determines the locations and load values to be shed. The solution is practical and promising for real-world applications.

Baquedano-Aguilar, Mario D.↗

An Optimization-Based HVAC Load and PV Disaggregation Methodology With Contextual Supervision

Here, this letter presents an optimization-based Heating, Ventilation, and Air Conditioning (HVAC) and PV disaggregation approach. This letter builds on the previous works of authors, which discuss HVAC disaggregation strategy for aggregated levels without requiring sub-metered information. This letter expands on previous works to discuss optimization-based HVAC disaggregation by varying PV penetration scenarios with joint disaggregation of HVAC load and PV.

Analytics↗

TH-CD-207A-05: Lung Surface Deformation Vector Fields Prediction by Monitoring Respiratory Surrogate Signals

Purpose: In this study, we developed and evaluated a method for predicting lung surface deformation vector fields (SDVFs) based on surrogate signals such as chest and abdomen motion at selected locations and spirometry measurements. Methods: A Patient-specific 3D triangular surface mesh of the lung region at end-expiration (EE) phase was obtained by threshold-based segmentation method. For each patient, a spirometer recorded the flow volume changes of the lungs; and 192 selected points at a regular spacing of 2cm X 2cm matrix points over a total area of 34cm X 24cm on the surface of chest and abdomen was used to detect chest wall motions. Preprocessing techniques such as QR factorization with column pivoting (QRCP) were employed to remove redundant observations of the chest and abdominal area. To create a statistical model between the lung surface and the corresponding surrogate signals, we developed a predictive model based on canonical ridge regression (CRR). Two unique weighting vectors were selected for each vertex on the surface of the lung, and they were optimized during the training process using the all other phases of 4D-CT except the end-inspiration (EI) phase. These parameters were employed to predict the vertices locations of a testing data set, which was the EI phase of 4D-CT. Results: For ten lung cancer patients, the deformation vector field of each vertex of lung surface mesh was estimated from the external motion at selected positions on the chest wall surface plus spirometry measurements. The average estimation of 98th percentile of error was less than 1 mm (AP= 0.85, RL= 0.61, and SI= 0.82). Conclusion: The developed predictive model provides a non-invasive approach to derive lung boundary condition. Together with personalized biomechanical respiration modelling, the proposed model can be used to derive the lung tumor motion during radiation therapy accurately from non-invasive measurements.

60 APPLIED LIFE SCIENCES↗

Structure and cooling of compact stars

We study the structure and evolution of neutron stars (NSs), the interiors of which are modeled using microscopic approaches and constrained by the condition that the equation of state (EoS) of matter extrapolated to high densities should not contradict known observational data from compact stars and experimental data from heavy-ion collisions (HIC). We use modern cooling simulations to extract distributions of NS masses required to reproduce those of the yet sparse data in the Temperature-Age (TA) plane. By comparing the results with the mass distribution for young, nearby NSs used in population synthesis, we can sharpen the NS cooling constraints.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Factorization method for Schrödinger equation in relativistic configuration space and q-deformations

Review paper is devoted to the relativistic configuration space (RCS) concept, a version of the relativistic Quantum Mechanics in RCS, the generalization of the Dirac-Infeld-Hall factorization method in the framework of the noncommutative differential calculus natural for RCS, different versions of the deformed oscillators, emerging as the generalization of the harmonic oscillator for RCS. In the formulation of the Newton-Wigner postulates for the relativistic localized states the hypothesis of commutativity of the position operator components is silently accepted as an evident fact. In the present work it is shown that commutativity is not necessary condition and the alternative (noncommutative) approach to the relativistic position operator and localization concept can be realized in a framework of the physically as well as mathematically comprehensive scheme. The different generalizations of the Dirac-Infeld-Hall factorization method for this case are constructed. This method enables us to find out all possible generalizations of the most important nonrelativistic integrable case—the harmonic oscillator. It is shown also that the relativistic oscillator = q —oscillator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The NonConforming Virtual Element Method for the Stokes Equations

In this paper, we present the nonconforming virtual element method (VEM) for the numerical approximation of velocity and pressure in the steady Stokes problem. The pressure is approximated using discontinuous piecewise polynomials, while each component of the velocity is approximated using the nonconforming virtual element space. On each mesh element the local virtual space contains the space of polynomials of up to a given degree, plus suitable nonpolynomial functions. The virtual element functions are implicitly defined as the solution of local Poisson problems with polynomial Neumann boundary conditions. As typical in VEM approaches, the explicit evaluation of the non-polynomial functions is not required. This approach makes it possible to construct nonconforming (virtual) spaces for any polynomial degree regardless of the parity, for two- and three-dimensional problems, and for meshes with very general polygonal and polyhedral elements. We show that the nonconforming VEM is inf-sup stable and establish optimal a priori error estimates for the velocity and pressure approximations. Finally, numerical examples confirm the convergence analysis and the effectiveness of the method in providing high-order accurate approximations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parallel-In-Time Multigrid with Adaptive Spatial Coarsening for The Linear Advection and Inviscid Burgers Equations

We apply a multigrid reduction-in-time (MGRIT) algorithm to hyperbolic partial differential equations in one spatial dimension. This study is motivated by the observation that sequential time-stepping is a computational bottleneck when attempting to implement highly concurrent algorithms; thus parallel-in-time methods are desirable. MGRIT adds parallelism by using a hierarchy of successively coarser temporal levels to accelerate the solution on the finest level. In the case of explicit time-stepping, spatial coarsening is a suitable approach to ensure that stability conditions are satisfied on all levels, and it may be useful for implicit time-stepping by producing cheaper multigrid cycles. Unfortunately, uniform spatial coarsening results in extremely slow convergence when the wave speed is near zero, even if only locally. We present an adaptive spatial coarsening strategy that addresses this issue for the variable coefficient linear advection equation and the inviscid Burgers equation using first-order explicit or implicit time-stepping methods. Serial numerical results show this method offers significant improvements over uniform coarsening and is convergent for the inviscid Burgers equation with and without shocks. Parallel scaling tests on up to 128K cores indicate that run-time improvements over serial time-stepping strategies are possible when spatial parallelism alone saturates, and that scalability is robust for oscillatory solutions which change on the scale of the grid spacing.

97 MATHEMATICS AND COMPUTING↗

MIDAS-DC-AC Tool: Fully Automating the Acquisition of AC Power Flow Solution (MIDAS-DC2AC)

MIDAS DC2AC is an automated tool for achieving a converged AC power flow solution from any dispatch, e.g., determined using DC power flow model based optimal power flow. The entire process is free of human interference. It is usually encountered in practice that, even with a DC power flow solution, acquiring the solved AC power flow solution, if exists, sometimes could be a challenging task, especially during the planning stage. It is also difficult to distinguish the unsolvable cases from diverging iterations. Manual adjustments to approach the desired power flow condition has been largely relied on in the past using lots of engineering heuristics. This tool provides a systematic way to first achieve a solvable AC power flow case by modifying the power flow condition, and then try to track the AC power flow solution while gradually removing the adopted changes. If all adopted changes can be completely removed, then the original AC power flow solution is obtained. Otherwise, insights for actionable controls are derived to help operation and planning. Currently, this tool has been implemented in Python using SIEMENS PTI PSS/E as power flow solver, where only adjusting generator terminal voltage set point is considered as an available means to try to turn an unsolved power flow to a solved one. In future, more means should be considered, including the operation of tap-changing transformers, switched shunts and redispatch of active power.

Tan, Jin↗

Spectroelectrochemical insights into the intrinsic nature of lead halide perovskites

Abstract Lead halide perovskites have emerged as a new class of semiconductor materials with exceptional optoelectronic properties, sparking significant research interest in photovoltaics and light-emitting diodes. However, achieving long-term operational stability remains a critical hurdle. The soft, ionic nature of the halide perovskite lattice renders them vulnerable to various instabilities. These instabilities can be triggered by factors such as photoexcitation, electrical bias, and the surrounding electrolyte/solvent or atmosphere under operating conditions. Spectroelectrochemistry offers a powerful approach to bridge the gap between electrochemistry and photochemistry (or spectroscopy), by providing a comprehensive understanding of the band structure and excited-state dynamics of halide perovskites. This review summarizes recent advances that highlight the fundamental principles, the electronic band structure of halide perovskite materials, and the photoelectrochemical phenomena observed upon photo- and electro-chemical charge injections. Further, we discuss halide instability, encompassing halide oxidation, vacancy formation, ion migration, degradation, and sequential expulsion under electrical bias. Spectroelectrochemical studies that provide a deeper understanding of interfacial processes and halide mobility can pave the way for the design of more robust perovskites, accelerating future research and development efforts. Graphical Abstract

Min, Seonhong↗