Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Assessment of pancreas cells

Pancreatic islets were obtained from guinea pig pancreas by the collagenase method and kept alive in tissue culture prior to further studies. Pancreas cell morphology was studied by standard histochemical techniques using light microscopy. Preparative vertical electrophoresis-levitation of dispersed fetal guinea pig pancreas cells was conducted in phosphate buffer containing a heavy water (D20) gradient which does not cause clumping of cells or alter the osmolarity of the buffers. The faster migrating fractions tended to be enriched in beta-cell content. Alpha and delta cells were found to some degree in most fractions. A histogram showing the cell count distribution is included.

Vanoss, C. J.↗

Numerical simulation of a powered-lift landing, tracking flow features using overset grids, and simulation of high lift devices on a fighter-lift-and-control wing

Attached as appendices to this report are documents describing work performed on the simulation of a landing powered-lift delta wing, the tracking of flow features using overset grids, and the simulation of flaps on the Wright Patterson Lab's fighter-lift-and-control (FLAC) wing. Numerical simulation of a powered-lift landing includes the computation of flow about a delta wing at four fixed heights as well as a simulated landing, in which the delta wing descends toward the ground. Comparison of computed and experimental lift coefficients indicates that the simulations capture the qualitative trends in lift-loss encountered by thrust-vectoring aircraft operating in ground effect. Power spectra of temporal variations of pressure indicate computed vortex shedding frequencies close to the jet exit are in the experimentally observed frequency range; the power spectra of pressure also provide insights into the mechanisms of lift oscillations. Also, a method for using overset grids to track dynamic flow features is described and the method is validated by tracking a moving shock and vortices shed behind a circular cylinder. Finally, Chimera gridding strategies were used to develop pressure coefficient contours for the FLAC wing for a Mach no. of 0.18 and Reynolds no. of 2.5 million.

Chawla, Kalpana↗

Flight Dynamics Analysis for Leonardo-BRDF

Leonardo-BRDF (Bidirectional Reflectance Distribution Function) is a new NASA mission concept proposed to allow the investigation of radiative transfer and its effect on the Earth's climate and atmospheric phenomenon. Enabled by the recent developments in small-satellite and formation flying technology, the mission is envisioned to be composed of an array of spacecraft in carefully designed orbits. The different perspectives provided by a distributed array of spacecraft offer a unique advantage to study the Earth's albedo. This paper presents the flight dynamics analysis performed in the context of the Leonardo-BRDF science requirements. First, the albedo integral is investigated and the effect of viewing geometry on science return is studied. The method used in this paper, based on Gauss quadrature, provides the optimal formation geometry to ensure that the value of the integral is accurately approximated. An orbit design approach is presented to achieve specific relative orbit geometries while simultaneously satisfying orbit dynamics constraints to reduce formation-keeping fuel expenditure. The relative geometry afforded by the design is discussed in terms of mission requirements. An optimal Lambert initialization scheme is presented with the required Delta-V to distribute all spacecraft from a common parking orbit into their appropriate orbits in the formation. Finally, formation-keeping strategies are developed and the associated Delta-V's are calculated to maintain the formation in the presence of perturbations.

Hughes, Steven P.↗

A method for using a time interval counter to measure frequency stability

It is shown how a commercial time interval counter can be used to measure the relative stability of two signals that are offset in frequency and mixed down to a beat note of about 1 Hz. To avoid the dead-time problem, the counter is set up to read the time interval between each beat note upcrossing and the next pulse of a 10 Hz reference pulse train. The actual upcrossing times are recovered by a simple algorithm whose outputs can be used for computing residuals and Allan variance. A noise floor-test yielded a delta f/f Allan deviation of 1.3 times 10 to the minus 9th power/tau relative to the beat frequency.

Greenhall, C. A.↗

A method for using a time interval counter to measure frequency stability

It is shown how a commercial time interval counter can be used to measure the relative stability of two signals that are offset in frequency and mixed down to a beat note of about 1 Hz. To avoid the dead-time problem, the counter is set up to read the time interval between each beat note upcrossing and the next pulse of a 10 Hz reference pulse train. The actual upcrossing times are recovered by a simple algorithm whose outputs can be used for computing residuals and Allan variance. A noise floor-test yielded a delta f-f Allan deviation of 1.3 times 10 to the minus 9th power/tau relative to the beat frequency.

Greenhall, Charles A.↗

Dielectric, electrical and magnetoelectric characterization of (x)Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} + (1 - x)Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3} composites

The structural, electrical, dielectric, magnetic and magnetoelectric properties of (x)Ni{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} + (1 - x)Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3} (x = 0, 0.15, 0.30, 0.45 and 1) have been studied by means of various experimental techniques. Polycrystalline samples of this series have been prepared by the double sintering ceramic method. X-ray diffraction data analysis revealed purity of the composites. Microstructural analysis using scanning electron microscopy mode depicts the presence of two phases in contact with each other. Dielectric properties were studied at and well above room temperature. Temperature dependent variation of the dielectric constant show diffused phase transition which can be well described by fitting the Lorentz-type relation, {epsilon}{sub A}/{epsilon}=1+(T-T{sub A}){sup 2}/2{delta}{sub A}{sup 2}. Observation of well-saturated ferroelectric hysteresis loop and magnetic hysteresis loop for composites indicates that ferroelectric and magnetic ordering exist simultaneously at room temperature. The static value of magneto electric voltage coefficient ({alpha}{sub E}) has been studied as a function of magnetic field at room temperature for all the composites. The maximum value of {alpha}{sub E} is 7.53 mV/(cm Oe) for 85% PLZT-15% NZFO composites.

36 MATERIALS SCIENCE↗

Head-on collision of dust-ion-acoustic soliton in quantum pair-ion plasma

In this paper, we study the head-on collision between two dust ion acoustic solitons in quantum pair-ion plasma. Using the extended Poincare-Lighthill-Kuo method, we obtain the Korteweg-de Vries equation, the phase shifts, and the trajectories after the head-on collision of the two dust ion acoustic solitons. It is observed that the phase shifts are significantly affected by the values of the quantum parameter H, the ratio of the multiples of the charge state and density of positive ions to that of the negative ions {beta} and the concentration of the negatively charged dust particles {delta}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancing Docking Accuracy with PECAN2, a 3D Atomic Neural Network Trained without Co-Complex Crystal Structures

Decades of drug development research have explored a vast chemical space for highly active compounds. The exponential growth of virtual libraries enables easy access to billions of synthesizable molecules. Computational modeling, particularly molecular docking, utilizes physics-based calculations to prioritize molecules for synthesis and testing. Nevertheless, the molecular docking process often yields docking poses with favorable scores that prove to be inaccurate with experimental testing. To address these issues, several approaches using machine learning (ML) have been proposed to filter incorrect poses based on the crystal structures. However, most of the methods are limited by the availability of structure data. Here, we propose a new pose classification approach, PECAN2 (Pose Classification with 3D Atomic Network 2), without the need for crystal structures, based on a 3D atomic neural network with Point Cloud Network (PCN). The new approach uses the correlation between docking scores and experimental data to assign labels, instead of relying on the crystal structures. We validate the proposed classifier on multiple datasets including human mu, delta, and kappa opioid receptors and SARS-CoV-2 Mpro. Our results demonstrate that leveraging the correlation between docking scores and experimental data alone enhances molecular docking performance by filtering out false positives and false negatives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast solutions to the steady state compressible and incompressible fluid dynamic equations

For low speed flows the use of the compressible fluid dynamic equations is inefficient. The use of an explicit scheme requires delta t to be bounded by 1/c. However, the physical parameters change over time scales of order 1/u which is much larger. Hence, it is not appropriate to use explicit schemes for very subsonic flows. Implicit schemes are hard to vectorize and frequently do not converge quickly for very subsonic flows. If one is only interested in the steady state then a minor change to an existing code can greatly increase the efficiency of an explicit method. Even when using an implicit method the proposed changes increase the efficiency of the scheme. The Euler equations for low speed flows will be considered first and then incompressible flows. The method is generalized to include viscous effects. Supersonic flow is accelerated by essentially decoupling the equations.

Turkel, E.↗

On accuracy conditions for the numerical computation of waves

The Helmholtz equation (Delta + K(2)n(2))u = f with a variable index of refraction n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. Such problems can be solved numerically by first truncating the given unbounded domain and imposing a suitable outgoing radiation condition on an artificial boundary and then solving the resulting problem on the bounded domain by direct discretization (for example, using a finite element method). In practical applications, the mesh size h and the wave number K, are not independent but are constrained by the accuracy of the desired computation. It will be shown that the number of points per wavelength, measured by (Kh)(-1), is not sufficient to determine the accuracy of a given discretization. For example, the quantity K(3)h(2) is shown to determine the accuracy in the L(2) norm for a second-order discretization method applied to several propagation models.

Bayliss, A.↗

On accuracy conditions for the numerical computation of waves

The Helmholtz equation (Delta + K(2)n(2))u = f with a variable index of refraction n, and a suitable radiation condition at infinity serves as a model for a wide variety of wave propagation problems. Such problems can be solved numerically by first truncating the given unbounded domain and imposing a suitable outgoing radiation condition on an artificial boundary and then solving the resulting problem on the bounded domain by direct discretization (for example, using a finite element method). In practical applications, the mesh size h and the wave number K, are not independent but are constrained by the accuracy of the desired computation. It will be shown that the number of points per wavelength, measured by (Kh)(-1), is not sufficient to determine the accuracy of a given discretization. For example, the quantity K(3)h(2) is shown to determine the accuracy in the L(2) norm for a second-order discretization method applied to several propagation models.

Bayliss, A.↗

Very long baseline IPS observations of the solar wind speed in the fast polar streams

Observations of intensity scintillation (IPS) with two or more spaced antennas have been widely used to measure the solar wind velocity. Such methods are particularly valuable in regions which spacecraft have not yet penetrated, but they are also very useful in improving the spatial temporal sampling of the solar wind, even in regions where spacecraft data are available. The principle of the measurement is to measure the time delay tau(sub d) between the scintillations observed with an antenna baseline b. The velocity estimate is just V = b/tau(sub d). The error in estimation of the time delay delta tau(sub d) is independent of the baseline length, thus the error in the velocity estimate delta V given by delta(V)/V approximately equals to (delta tau(sub d))/tau(sub d) is inversely proportional to tau(sub d) and hence to b. However the use of a long baseline b has a less obvious advantage; it provides a means for separating fast and slow contributions when both are present in the scattering region. Here we will present recent observations made using the large cylinder antenna at Ooty in the Nilgiri Hills of South India, and one of the 45 m dishes of GMRT near Pune in West-Central India. The baseline of 900 km is, by a considerable margin, the longest ever used for IPS and provides excellent velocity resolution. These results compared with the ULYSSES observations and other IPS measurements made closer to the sun with higher frequency instruments such as EISCAT and the VLBA will provide a precise measure of the velocity profile of the fast north-polar stream.

Rao, A. Pramesh↗

Land Surface Temperature Measurements form EOS MODIS Data

We have developed a physics-based land-surface temperature (LST) algorithm for simultaneously retrieving surface band-averaged emissivities and temperatures from day/night pairs of MODIS (Moderate Resolution Imaging Spectroradiometer) data in seven thermal infrared bands. The set of 14 nonlinear equations in the algorithm is solved with the statistical regression method and the least-squares fit method. This new LST algorithm was tested with simulated MODIS data for 80 sets of band-averaged emissivities calculated from published spectral data of terrestrial materials in wide ranges of atmospheric and surface temperature conditions. Comprehensive sensitivity and error analysis has been made to evaluate the performance of the new LST algorithm and its dependence on variations in surface emissivity and temperature, upon atmospheric conditions, as well as the noise-equivalent temperature difference (NE(Delta)T) and calibration accuracy specifications of the MODIS instrument. In cases with a systematic calibration error of 0.5%, the standard deviations of errors in retrieved surface daytime and nighttime temperatures fall between 0.4-0.5 K over a wide range of surface temperatures for mid-latitude summer conditions. The standard deviations of errors in retrieved emissivities in bands 31 and 32 (in the 10-12.5 micrometer IR spectral window region) are 0.009, and the maximum error in retrieved LST values falls between 2-3 K. Several issues related to the day/night LST algorithm (uncertainties in the day/night registration and in surface emissivity changes caused by dew occurrence, and the cloud cover) have been investigated. The LST algorithms have been validated with MODIS Airborne Simulator (MAS) dada and ground-based measurement data in two field campaigns conducted in Railroad Valley playa, NV in 1995 and 1996. The MODIS LST version 1 software has been delivered.

Wan, Zhengming↗

Effect of Low-Temperature Sensitization on the Corrosion Behavior of AISI Type 304L SS Weld Metal in Simulated Groundwater

The manuscript presents the investigations carried out on the effect of low-temperature sensitization (LTS) of 304L SS weld metal on its corrosion behavior in simulated groundwater, for its application as a canister material for long-term storage of nuclear vitrified high-level waste in geological repositories. AISI type 304L SS weld pad was fabricated by multipass gas tungsten arc welding process using 308L SS filler wire. The as-welded specimens were subsequently subjected to carbide nucleation and further to LTS at 500 °C for 11 days to simulate a temperature of 300 °C for 100-year life of the canister in geological repositories. Delta ferrite (δ-ferrite) content of the 304L SS weld metal substantially decreased on carbide nucleation treatment and further only a marginal decrease occurred on LTS treatment. The microstructure of the as-welded consisted of δ-ferrite as a minor phase distributed in austenite matrix. The δ-ferrite appeared fragmented in the carbide-nucleated and LTS-treated weld metal. The degree of sensitization measured by double-loop electrochemical potentokinetic reactivation method indicated an increase in carbide nucleation treatment when compared to the as-welded specimens, and further increase occurred on LTS treatment. Potentiodynamic anodic polarization investigations in simulated groundwater indicated a substantial decrease in the localized corrosion resistance of the carbide-nucleated and LTS 304L SS weld metals, when compared to the as-welded specimens. Post-experimental micrographs indicated pitting as the primary mode of attack in the as-welded, while pitting and intergranular corrosion (IGC) occurred in the carbide-nucleated weld metal. LTS-treated weld metal predominantly underwent IGC attack. The decrease in the localized corrosion resistance of the weld metal after LTS treatment was found to have a direct correlation with the degree of sensitization and the weld microstructure. The results are detailed in the manuscript.

36 MATERIALS SCIENCE↗

Black-hole bremsstrahlung and the efficiency of mass-energy radiative transfer

We present results from numerical evolution of a boosted black hole, perturbed nonlinearly by an axisymmetric distribution of matter in the realm of Robinson-Trautman spacetimes. Characteristic initial data for the system were constructed and the Robinson-Trautmann equation was integrated for these data using a numerical code based on the Galerkin-collocation method. The emission of gravitational waves by the system is typical of bremsstrahlung at early times, a consequence of the deceleration of the black hole as it interacts with the perturbation; part of the perturbation is radiated away and another part is absorbed into the hole. The angular pattern evolves to the quadrupole form for later times. The final configuration is a black hole in motion with larger (Bondi) rest mass and smaller boost parameter. The efficiency {delta} of mass-energy extraction by gravitational wave emission was also computed. The relation of {delta} to the mass of the remnant black hole satisfies a nonextensive thermostatistics distribution with entropic index q{approx_equal}1/2. The result extends analytical evaluations based on the linearized theory of gravitational wave emission. For each initial boost parameter, there always exists a (large) value of the perturbation parameter A{sub 0} for which the momentum of the remnant black hole has opposite sign to that of the unperturbed black hole, due to the strong deceleration during the process of gravitational wave emission. The temporal wave form is that of an initial burst and we evaluate that for a large range of A{sub 0} the process corresponds to a high power output in the initial dominant pulse.

79 ASTRONOMY AND ASTROPHYSICS↗

Dissipative tunneling in nanosystems

A quantum dynamical problem has been analytically solved for a two-level system where localized states L{sub 0} and R{sub 0} are strongly coupled with reservoirs of local oscillations {l_brace}L{sub n}{r_brace} and {l_brace}R{sub n}{r_brace}. It is additionally assumed that the spectra of reservoirs are equidistant and the coupling constants are the same. It has been shown that the evolution of states L{sub 0} and R{sub 0} in recurrence cycles depends on three independent factors, which characterize exchange with the two-level system, exchange of L{sub 0} with {l_brace}L{sub n}{r_brace} (R{sub 0} with {l_brace}R{sub n}{r_brace}) and the phonon-induced decay of {l_brace}L{sub n}{r_brace} and {l_brace}R{sub n}{r_brace}. In addition to coherent oscillations with the frequency of the two-level system, {Delta}, and dissipative tunneling with a rate {Delta}{sup 2}/{pi}C{sup 2} (where C is the matrix element of the coupling of L{sub 0} and R{sub 0} with L{sub n} and R{sub n}), a new regime appears where L-R transitions are induced by the partial recovery of the populations of L{sub 0} and R{sub 0} in each recurrence cycle due to synchronous transitions from reservoirs. These transitions induce repeating changes in the populations of the states of the two-level system (Loschmidt echo). The number and width of the echo components increase with the cycle number. Evolution becomes irregular because of the mixing of the contributions from pulses of the neighboring cycles, when the cycle number k exceeds the critical value k{sub c} = {pi}{sup 2}C{sup 2}. Unlike the populations, their cycle-average values remain regular at k Much-Greater-Than k{sub c}. When {Delta} Much-Less-Than {pi}C{sup 2}, the cycle-average populations oscillate with a frequency of {Delta}{Omega}/{pi}C{sup 2} irrespective of mixing. The frequency of oscillations of the populations of the states {l_brace}L{sub n}{r_brace} and {l_brace}R{sub n}{r_brace} is approximately n{Omega}({Delta}/2{pi}C{sup 2}){sup 2}, where {Omega} is the spacing between the neighboring levels of the reservoir and n{Omega} is the difference between the energies of the states L{sub 0} and L{sub n}. The appearance of the mentioned low-frequency oscillations is due to the formation of collective states of the two-level system that are 'dressed' by the reservoir. The predicted oscillations can be detected by femtosecond spectroscopy methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preliminary measurement of the airframe noise from an F-106B delta wing aircraft at low flyover speeds

To establish a realistic lower limit for the noise level of advanced supersonic transport aircraft will require knowledge concerning the amount of noise generated by the airframe itself as it moves through the air. The airframe noise level of an F-106B aircraft was determined and was compared to that predicted from an existing empirical relationship. The data were obtained from flyover and static tests conducted to determine the background noise level of the F-106B aircraft. Preliminary results indicate that the spectrum associated with airframe noise was broadband and peaked at a frequency of about 570 hertz. An existing empirical method successfully predicted the frequency where the spectrum peaked. However, the predicted OASPL value of 105 db was considerably greater than the measures value of 83 db.

Burley, R. R.↗