Search NASA⌕ Search

SEARCH · Search NASA

Results for “discretization error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Improved methods for fan sound field determination

Several methods for determining acoustic mode structure in aircraft turbofan engines using wall microphone data were studied. A method for reducing data was devised and implemented which makes the definition of discrete coherent sound fields measured in the presence of engine speed fluctuation more accurate. For the analytical methods, algorithms were developed to define the dominant circumferential modes from full and partial circumferential arrays of microphones. Axial arrays were explored to define mode structure as a function of cutoff ratio, and the use of data taken at several constant speeds was also evaluated in an attempt to reduce instrumentation requirements. Sensitivities of the various methods to microphone density, array size and measurement error were evaluated and results of these studies showed these new methods to be impractical. The data reduction method used to reduce the effects of engine speed variation consisted of an electronic circuit which windowed the data so that signal enhancement could occur only when the speed was within a narrow range.

Cicon, D. E.↗

Network simulation using the simulation language for alternate modeling (SLAM 2)

The simulation language for alternate modeling (SLAM 2) is a general purpose language that combines network, discrete event, and continuous modeling capabilities in a single language system. The efficacy of the system's network modeling is examined and discussed. Examples are given of the symbolism that is used, and an example problem and model are derived. The results are discussed in terms of the ease of programming, special features, and system limitations. The system offers many features which allow rapid model development and provides an informative standardized output. The system also has limitations which may cause undetected errors and misleading reports unless the user is aware of these programming characteristics.

Shen, S.↗

A Vernier Regulator for ILC Marx Droop Compensation

A two-part compensation scheme, Vernier Regulation, has been applied to offset the voltage droop (40% without correction) in a Marx-topology klystron modulator developed for the International Linear Collider (ILC). Coarse regulation, {+-}5%, is achieved by turning on additional Main Marx cells (Delayed Cells) sequentially as the droop reaches the cell voltage (11 kV). Further regulation to {+-}0.5% is achieved by adding a small Marx in series with the Main Marx. This Vernier Marx is composed of sixteen, 1.2 kV cells that are assembled as a seventeenth cell in the Main Marx. These Vernier Cells are turned on sequentially to generate a series of discrete corrections to the droop in the Main Marx cells with a step size {le}1% of the output voltage. As the required correction reaches 11 kV, all Vernier Cells are turned off synchronously with the turn on of a Delayed Cell. There are up to five Delayed Cells and six Vernier Marx cycles during each ILC Marx output pulse. The Vernier Marx has a local control system that will detect and respond to over-voltage and over-current errors. In this paper, a detailed description of the design, implementation and testing of the Vernier Marx is presented.

43 PARTICLE ACCELERATORS↗

Parametric reduced order models for graded lattice structures

Graded lattice structures, characterized by smoothly varying mechanical properties, hold significant promise for optimizing material distribution in advanced engineering applications. However, accurately modeling these structures poses substantial computational challenges due to the continuous geometric variations within their unit cells. Here, to address these challenges, this paper introduces a novel Efficient Reduced Order Model (EROM) that integrates the Matrix Discrete Empirical Interpolation Method (MDEIM) and Discrete Empirical Interpolation Method (DEIM) with polynomial regression to efficiently manage geometric parametrization in lattice structures. Unlike traditional reduced order models (ROMs) that require extensive precomputed libraries for each geometric configuration, our approach enables continuous geometric variations through a flexible algebraic formulation, significantly reducing computational costs while preserving high accuracy. The method constructs projection matrices for individual unit cells that can be efficiently assembled into global systems, leveraging the repetitive nature of lattice structures. Numerical studies demonstrate that our EROM achieves displacement errors below 1% and von Mises stress prediction errors below 4%, coupled with computational speedups exceeding two orders of magnitude compared to full-order simulations. The proposed method's modularity and scalability make it particularly suitable for design optimization and real-time simulation of functionally graded lattice structures, with applications spanning aerospace to biomedical engineering.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Statistical Interpolation Code for Ocean Analysis and Forecasting

Abstract We present a data assimilation package for use with ocean circulation models in analysis, forecasting, and system evaluation applications. The basic functionality of the package is centered on a multivariate linear statistical estimation for a given predicted/background ocean state, observations, and error statistics. Novel features of the package include support for multiple covariance models, and the solution of the least squares normal equations either using the covariance matrix or its inverse—the information matrix. The main focus of this paper, however, is on the solution of the analysis equations using the information matrix, which offers several advantages for solving large problems efficiently. Details of the parameterization of the inverse covariance using Markov random fields are provided and its relationship to finite-difference discretizations of diffusion equations are pointed out. The package can assimilate a variety of observation types from both remote sensing and in situ platforms. The performance of the data assimilation methodology implemented in the package is demonstrated with a yearlong global ocean hindcast with a 1/4° ocean model. The code is implemented in modern Fortran, supports distributed memory, shared memory, multicore architectures, and uses climate and forecasts compliant Network Common Data Form for input/output. The package is freely available with an open source license from www.tendral.com/tsis/ .

Srinivasan, Ashwanth↗

SEU/SET Tolerant Phase-Locked Loops

The phase-locked loop (PLL) is an old and widely used circuit for frequency and phase demodulation, carrier and clock recovery, and frequency synthesis [1]. Its implementations range from discrete components to fully integrated circuits and even to firmware or software. Often the PLL is a highly critical component of a system, as for example when it is used to derive the on-chip clock, but as of this writing no definitive single-event upset (SET)/single-event transient (SET) tolerant PLL circuit has been described. This chapter hopes to rectify that situation, at least in regard to PLLs that are used to generate clocks. Older literature on fault-tolerant PLLs deals with detection of a hard failure, which is recovered by replacement, repair, or manual restart of discrete component systems. Several patents exist along these lines (6349391, 6272647, and 7089442). A newer approach is to harden the parts of a PLL system, to one degree or another, such as by using a voltage-based charge pump or a triple modular redundant (TMR) voted voltage-controlled oscillator (VCO). A more comprehensive approach is to harden by triplication and voting (TMR) all the digital pieces (primarily the divider) of a frequency synthesis PLL, but this still leaves room for errors in the VCO and the loop filter. Instead of hardening or voting pieces of a system, such as a frequency synthesis system (i.e., clock multiplier), we will show how the entire system can be voted. There are two main ways of doing this, each with advantages and drawbacks. We will show how each has advantages in certain areas, depending on the lock acquisition and tracking characteristics of the PLL. Because of this dependency on PLL characteristics, we will briefly revisit the theory of PLLs. But first we will describe the characteristics of voters and their correct application, as some literature does not follow the voting procedure that guarantees elimination of errors. Additionally, we will find that voting clocks is a bit trickier than voting data where an infallible clock is assumed. It is our job here to produce (or recover) that assumed infallible clock!

Shuler, Robert L., Jr.↗

Multiscale two-stage solver for Biot’s poroelasticity equations in subsurface media

In this paper, we propose a two-stage preconditioner for accelerating the iterative solution by a Krylov subspace method of Biot’s poroelasticity equations based on a displacement-pressure formulation. The spatial discretization combines a finite element method for mechanics and a finite volume approach for flow. The fully implicit backward Euler scheme is used for time integration. The result is a 2 × 2 block linear system for each timestep. The preconditioning operator is obtained by applying a two-stage scheme. The first stage is a global preconditioner that employs multiscale basis functions to construct coarse-scale coupled systems using a Galerkin projection. This global stage is effective at damping low-frequency error modes associated with long-range coupling of the unknowns. The second stage is a local block-triangular smoothing preconditioner, which is aimed at high-frequency error modes associated with short-range coupling of the variables. Lastly, various numerical experiments are used to demonstrate the robustness of the proposed solver.

58 GEOSCIENCES↗

Discontinuous Galerkin solution of the Navier-Stokes equations on deformable domains

We describe a method for computing time-dependent solutions to the compressible Navier-Stokes equations on variable geometries. We introduce a continuous mapping between a fixed reference configuration and the time varying domain, By writing the Navier-Stokes equations as a conservation law for the independent variables in the reference configuration, the complexity introduced by variable geometry is reduced to solving a transformed conservation law in a fixed reference configuration, The spatial discretization is carried out using the Discontinuous Galerkin method on unstructured meshes of triangles, while the time integration is performed using an explicit Runge-Kutta method, For general domain changes, the standard scheme fails to preserve exactly the free-stream solution which leads to some accuracy degradation, especially for low order approximations. This situation is remedied by adding an additional equation for the time evolution of the transformation Jacobian to the original conservation law and correcting for the accumulated metric integration errors. A number of results are shown to illustrate the flexibility of the approach to handle high order approximations on complex geometries.

97 MATHEMATICS AND COMPUTING↗

NEON AOP foliar trait maps, maps of model uncertainty estimates, and conifer map, East River, CO 2018

This data package contains mapped trait estimates and their uncertainties, and conifer map, for the National Ecological Observatory Network's Airborne Observation Platform survey data acquired over the Upper East River, Colorado in 2018. For full details, please see associated reference. in brief, trait models were developed independently for needle and non-needle leaf species using partial least squares regression (PLSR) using ground data from additional datasets: doi:10.15485/1618130, doi:10.15485/1618132, and doi:10.15485/1631278, merged with extracted spectral data from doi:10.15485/1618131. We separated vegetated pixels into needle and non-needle classes in order to generate a classification map based on the spectral differences between these leaf types (conifer.tif). We trained a deep learning model with custom architecture, detailed in Chadwick et al. In Press. The model performed with 0.998 true positive rate and 0.982 true negative rate, with ‘positives’ being non-needle identification. We then utilized PLSR to generate models of foliar traits for each leaf type. So that we could also map uncertainty in these predictions, we generated ten different models for needle and non-needle leaf species using different testing holdout sets of discrete sites. Each of these models was developed with a 100-fold cross validation procedure that utilized a 70% training set and 30% validation set with each fold, and then assessed based on the 10% of testing sites that were not included in that model’s development. The mean predicted value across the 10 models is used for the trait estimate in each pixel across the study area. The models are applied according to the leaf type designation in the conifer.tif map. The errors are the standard deviation across the 10 different models developed, with high error suggesting instability in model prediction and areas where values may not be reliable for ecological inference. These maps are only applied to areas with a NDVI > 0.5 to exclude non-vegetated areas. Shade masks could be applied to these data (doi:10.15485/1618131), but have not been for this data package. These data are also available on Google Earth Engine: https://code.earthengine.google.com/?asset=users/kdc/ER_NEON

54 ENVIRONMENTAL SCIENCES↗

Gallium arsenide processing for gate array logic

The development of a reliable and reproducible GaAs process was initiated for applications in gate array logic. Gallium Arsenide is an extremely important material for high speed electronic applications in both digital and analog circuits since its electron mobility is 3 to 5 times that of silicon, this allows for faster switching times for devices fabricated with it. Unfortunately GaAs is an extremely difficult material to process with respect to silicon and since it includes the arsenic component GaAs can be quite dangerous (toxic) especially during some heating steps. The first stage of the research was directed at developing a simple process to produce GaAs MESFETs. The MESFET (MEtal Semiconductor Field Effect Transistor) is the most useful, practical and simple active device which can be fabricated in GaAs. It utilizes an ohmic source and drain contact separated by a Schottky gate. The gate width is typically a few microns. Several process steps were required to produce a good working device including ion implantation, photolithography, thermal annealing, and metal deposition. A process was designed to reduce the total number of steps to a minimum so as to reduce possible errors. The first run produced no good devices. The problem occurred during an aluminum etch step while defining the gate contacts. It was found that the chemical etchant attacked the GaAs causing trenching and subsequent severing of the active gate region from the rest of the device. Thus all devices appeared as open circuits. This problem is being corrected and since it was the last step in the process correction should be successful. The second planned stage involves the circuit assembly of the discrete MESFETs into logic gates for test and analysis. Finally the third stage is to incorporate the designed process with the tested circuit in a layout that would produce the gate array as a GaAs integrated circuit.

Cole, Eric D.↗

Model reduction using new optimal Routh approximant technique

An optimal Routh approximant of a single-input single-output dynamic system is a reduced-order transfer function of which the denominator is obtained by the Routh approximation method while the numerator is determined by minimizing a time-response integral-squared-error (ISE) criterion. In this paper, a new elegant approach is presented for obtaining the optimal Routh approximants for linear time-invariant continuous-time systems. The approach is based on the Routh canonical expansion, which is a finite-term orthogonal series of rational basis functions, and minimization of the ISE criterion. A procedure for combining the above approach with the bilinear transformation is also presented in order to obtain the optimal bilinear Routh approximants of linear time-invariant discrete-time systems. The proposed technique is simple in formulation and is amenable to practical implementation.

Hwang, Chyi↗

An adaptive, data-driven multiscale approach for dense granular flows

The accuracy of coarse-grained continuum models of dense granular flows is limited by the lack of high-fidelity closure models for granular rheology. One approach to addressing this issue, referred to as the hierarchical multiscale method, is to use a high-fidelity fine-grained model to compute the closure terms needed by the coarse-grained model. The difficulty with this approach is that the overall model can become computationally intractable due to the high computational cost of the high-fidelity model. In this work, we describe a multiscale modeling approach for dense granular flows that utilizes neural networks trained using high-fidelity discrete element method (DEM) simulations to approximate the constitutive granular rheology for a continuum incompressible flow model. Our approach leverages an ensemble of neural networks to estimate predictive uncertainty that allows us to determine whether the rheology at a given point is accurately represented by the neural network model. Additional DEM simulations are only performed when needed, minimizing the number of additional DEM simulations required when updating the rheology. This adaptive coupling significantly reduces the overall computational cost of the approach while controlling the error. In addition, the neural networks are customized to learn regularized rheological behavior to ensure well-posedness of the continuum solution. We first validate the approach using two-dimensional steady-state and decelerating inclined flows. We then demonstrate the efficiency of our approach by modeling three-dimensional sub-aerial granular column collapse for varying initial column aspect ratios, where our multiscale method compares well with the computationally expensive computational fluid dynamics (CFD)-DEM simulation.

Dense granular flows↗

Absolute calibration method for nanosecond-resolved, time-streaked, fiber optic light collection, spectroscopy systems

This paper describes a convenient and accurate method to calibrate fast (<1 ns resolution) streaked, fiber optic light collection, spectroscopy systems. Such systems are inherently difficult to calibrate due to the lack of sufficiently intense, calibrated light sources. Such a system is used to collect spectral data on plasmas generated in electron beam diodes fielded on the RITS-6 accelerator (8-12MV, 140-200kA) at Sandia National Laboratories. On RITS, plasma light is collected through a small diameter (200 {mu}m) optical fiber and recorded on a fast streak camera at the output of a 1 meter Czerny-Turner monochromator. For this paper, a 300 W xenon short arc lamp (Oriel Model 6258) was used as the calibration source. Since the radiance of the xenon arc varies from cathode to anode, just the area around the tip of the cathode ('hotspot') was imaged onto the fiber, to produce the highest intensity output. To compensate for chromatic aberrations, the signal was optimized at each wavelength measured. Output power was measured using 10 nm bandpass interference filters and a calibrated photodetector. These measurements give power at discrete wavelengths across the spectrum, and when linearly interpolated, provide a calibration curve for the lamp. The shape of the spectrum is determined by the collective response of the optics, monochromator, and streak tube across the spectral region of interest. The ratio of the spectral curve to the measured bandpass filter curve at each wavelength produces a correction factor (Q) curve. This curve is then applied to the experimental data and the resultant spectra are given in absolute intensity units (photons/sec/cm{sup 2}/steradian/nm). Error analysis shows this method to be accurate to within +/- 20%, which represents a high level of accuracy for this type of measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Distributed State Estimation Over Time-Varying Graphs: Exploiting the Age-of-Information

Here, we study the problem of designing a distributed observer for an LTI system over a time-varying communication graph. The limited existing work on this topic imposes various restrictions either on the observation model or on the sequence of communication graphs. In contrast, we propose a single-time-scale distributed observer that works under mild assumptions. Specifically, our communication model only requires strong-connectivity to be preserved over non-overlapping, contiguous intervals that are even allowed to grow unbounded over time. We show that under suitable conditions that bound the growth of such intervals, joint observability is sufficient to track the state of any discrete-time LTI system exponentially fast, at any desired rate. We also develop a variant of our algorithm that is provably robust to worst-case adversarial attacks, provided the sequence of graphs is sufficiently connected over time. The key to our approach is the notion of a "freshness-index" that keeps track of the age-of-information being diffused across the network. Such indices enable nodes to reject stale estimates of the state, and, in turn, contribute to stability of the error dynamics.

42 ENGINEERING↗

Statistical Mechanics Modeling of Mesoscale Deformation in Metals

The research under this project focused on a theoretical and computational modeling of dislocation dynamics of mesoscale deformation of metal single crystals. Specifically, the work aimed to implement a continuum statistical theory of dislocations to understand strain hardening and cell structure formation under monotonic loading. These aspects of crystal deformation are manifestations of the evolution of the underlying dislocation system under mechanical loading. The project had three research tasks: 1) Investigating the statistical characteristics of dislocation systems in deformed crystals. 2) Formulating kinetic equations of dislocations and coupling these kinetics equations and crystal mechanics. 3) Computational solution of coupled crystal mechanics and dislocation kinetics. Comparison of dislocation dynamics predictions with experimental results in the area of statistical properties of dislocations and their field was also a part of the proposed effort. In the first research task, the dislocation dynamics simulation method was used to investigate the spatial, orientation, velocity, and temporal statistics of dynamical dislocation systems, and on the use of the results from this investigation to complete the kinetic description of dislocations. The second task focused on completing the formulation of a kinetic theory of dislocations that respects the discrete nature of crystallographic slip and the physics of dislocation motion and dislocation interaction in the crystal. Part of this effort also targeted the theoretical basis for establishing the connection between discrete and continuum representation of dislocations and the analysis of discrete dislocation simulation results within the continuum framework. This part of the research enables the enrichment of the kinetic description with information representing the discrete dislocation systems behavior. The third task focused on the development of physics-inspired numerical methods of solution of the coupled dislocation kinetics and crystal mechanics framework. To a large extent, this task has also been successfully started. We have developed a custom finite-element approach with mesh points being a subset of the underlying crystal structure. When used to predict the evolution of the dislocation system, the planar motion of dislocations is naturally captured for all slip systems, thus minimizing numerical errors and providing simple ways to investigate cross slip and dislocation reactions. Preliminary results in this direction show that we are closer than ever in building a predictive framework for dislocation dynamics and mesoscale plasticity based on the first principles of dislocation dynamics. The rest of the report gives and overview of the research performed under this project and highlights the key results and open questions left for future investigations.

36 MATERIALS SCIENCE↗

Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations

High-fidelity numerical simulations of an experimental rotating detonation engine with discrete fuel/air injection were conducted. A series of configurations with different feed-plenum pressures but with constant equivalence ratio were studied. Detailed chemical kinetics for the hydrogen/air system is used. A resolution study for the full rotating detonation engine (RDE) system simulation is also conducted. Two kinds of boundary conditions, a total pressure boundary and a constant mass flow rate boundary, are used to assess the effects of the inlet boundary. As mass flow rate is increased, the total pressure boundary causes more error in the axial pressure distribution while the constant mass flow rate gives a better solution for all cases ran. The simulations confirm experimental findings, and reproduce qualitative as well as some of the quantitative trends. These results demonstrate that a) fuel-air mixing is highly non-uniform within the detonation chamber, leading to variations in local equivalence ratio, b) the fuel and oxidizer injectors experience significant backflow as the detonation wave passes over, but recover at different rates which further augments the inefficiencies in mixing, and c) parasitic combustion in the mixing region makes the detonation wave weak by extending the reaction zone across the wave.

33 ADVANCED PROPULSION SYSTEMS↗

Nodal Modeling of Tank Pressurization and Draining using a Multi-Node-Ullage Approach

Pressurized expulsion tests of liquid methane were modeled by a nodal code using a multinode ullage approach. Generalized Fluid System Simulation Program (GFSSP), a finite volume based nodal code was used to model the expulsion of liquid methane from a 1.52-meter (5 ft) diameter spherical tank by pressurizing with helium and gaseous methane. The purpose of the model was to estimate the amount of pressurant required and amount of condensation and evaporation of methane during the operation. The ullage was discretized into multiple nodes and each fluid node was connected to solid nodes. Both the fluid and solid nodes grow as the tank drains. The heat and mass transfer between fluid and solid node in the tank ullage was computed. The heat and mass transfer between the bottom ullage node and the liquid methane was also computed. The model predictions were compared with data from twelve test cases. The predicted pressurant consumption for helium pressurization compares with test data with a Mean Absolute Percent Error (MAPE) of 3 %. For autogenous pressurization, where gaseous methane was used to pressurize liquid methane, the predicted pressurant consumption compares with a MAPE of 6%.

Cryogenic Propellant↗

Nodal Modeling of Helium Pressurization and Autogenous Pressurization and Draining using a Multi-Node-Ullage Approach

Pressurized expulsion tests of liquid methane were modeled by a nodal code using a multinode ullage approach. Generalized Fluid System Simulation Program (GFSSP), a finite volume based nodal code was used to model the expulsion of liquid methane from a 1.52-meter (5 ft) diameter spherical tank by pressurizing with helium and gaseous methane. The purpose of the model was to estimate the amount of pressurant required and amount of condensation and evaporation of methane during the operation. The ullage was discretized into multiple nodes and each fluid node was connected to solid nodes. Both the fluid and solid nodes grow as the tank drains. The heat and mass transfer between fluid and solid node in the tank ullage was computed. The heat and mass transfer between the bottom ullage node and the liquid methane was also computed. The model predictions were compared with data from twelve test cases. The predicted pressurant consumption for helium pressurization compares with test data with a Mean Absolute Percent Error (MAPE) of 3%. For autogenous pressurization, where gaseous methane was used to pressurize liquid methane, the predicted pressurant consumption compares with a MAPE of 6%.

Nodal Model↗