Search NASA⌕ Search

SEARCH · Search NASA

Results for “dissolving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Complexity in the Photofunctionalization of Single-Wall Carbon Nanotubes with Hypochlorite

The reaction of aqueous suspensions of single-wall carbon nanotubes (SWCNTs) with UV-excited sodium hypochlorite has previously been reported to be an efficient route for doping nanotubes with oxygen atoms. Here, we have investigated how this reaction system is affected by pH level, dissolved O 2 content, and radical scavengers and traps. Products were characterized with near-IR fluorescence, Raman, and XPS spectroscopy. The reaction is greatly accelerated by removal of dissolved O 2 and strongly suppressed by TEMPO, a radical trap. Alcohols added as radical scavengers alter the reaction efficiency and the product peak emission wavelengths. Photofunctionalization with 300 nm irradiation is substantially less efficient at pH levels low enough to protonate the OCl – ion to HOCl. We deduce that in mildly treated high pH samples, the main product is sp 2 hybridized O-doped adducts formed by reaction of SWCNTs with atomic oxygen in its 3 P (ground) level. By contrast, treatment under low pH conditions leads to sp 3 hybridized SWCNT adducts formed by the addition of secondary radicals from reactions of • OH and • Cl. There is also evidence for additional photoreactions of product species under stronger irradiation. Researchers using photoexcited hypochlorite for SWCNT functionalization should be alert to the range of products and the sensitivity to reaction conditions in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic Removal of Zinc and Copper in Greenhouse Waste Effluent by Struvite

Struvite (MgNH 4 PO 4 ·6H 2 O) can be recovered from wastewaters for mitigation of phosphorus content. However, the interaction of dissolved constituents with struvite is rarely evaluated. Removal of heavy metals and total organic carbon (TOC) in a greenhouse wastewater (GW) by struvite was investigated in this work. Presynthesized struvite was added to GW and removal of Zn (689 μg/L), Cu (151 μg/L), and TOC (51 mg/L) monitored from 1 to 26 d. Metal uptake in sodium nitrate solutions was used to assess competition, and the influence of other GW constituents on sorption. Struvite was also directly precipitated from GW (PPT). Recovered GW solids had 64–247 mg/kg Zn, 12–54 mg/kg Cu, and 1721–8806 mg/kg TOC, with lowest loadings for PPT and highest for 26 d solids. X-ray absorption spectroscopy detected polymerized Zn-phosphate, induced by dissolved phosphorus in GW, and Cu copolymerization, initially limited by aqueous Cu-organic complexation. Sorbed Cu shifts Fourier transform infrared-sensitive phosphate bands and changes the intensities of reflections in X-ray diffraction patterns of struvite more so than Zn. Struvite from GW is more susceptible to thermal decomposition than unreacted struvite, evolving CO(g), CO 2 (g), NH 3 (g), and H 2 O(g). Therefore, struvite from GW sorbs metals and organics, and can release sorbed and structural components to the aqueous and gas phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation-Bonding and Protonation of the Fe[subscript 4]-Square Cluster

The synthesis and characterization of discrete, molecular iron-oxo clusters is pursued in the interest of molecular magnets, bioinspired materials and models for the geochemical aqueous-mineral interface. Iron-oxo clusters are challenging to synthesize in water, due to the extremely acidic and reactive nature of dissolved iron species, and thus require chelating ligands to passivate and neutralize the cluster surface. The 2-hydroxy-1,3-N,N,N',N'-diamino-propanetetraacetic acid (HPDTA) ligand has been used to isolate several Al and Fe cluster geometries, including the square clusters Fe{sub 4}(HPDTA){sub 2} and Al{sub 4}(HPDTA){sub 2}. While prior reports on the Fe{sub 4}(HPDTA){sub 2} cluster have focused on the magnetic properties, no solution characterization has been carried out. Using electrospray ionization mass-spectrometry (ESI-MS) we show this anionic Fe{sub 4}(HPDTA){sub 2} cluster can be dissolved intact in water, and recrystallized with virtually any metal as a countercation. The bonding of the metal cation to the square face of the cluster trends with ionic radii of the cations, as shown by structural characterization of Fe{sub 4}(HPDTA){sub 2} with Li{sup +}, Na{sup +}, Cs{sup +}, Mg{sup 2+}, Ba{sup 2+}, La{sup 3+}, Eu{sup 3+}, and Zn{sup 2+}. This trend is similar to that observed for association of cations on metal oxide surfaces in the environment. Furthermore, protonation of the bridging oxo ligands of this series of Fe{sub 4}(HPDTA){sub 2} clusters is variable (0, 1, or 2 protons), and structures as a function of protonation is discussed. This paper, largely structural in nature, sets the foundation for future aqueous phase studies of iron-oxo molecular clusters as models for the oxide-water interface in the natural aqueous environment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis of silver nanocubes in a hydrophobic binary organic solvent.

Synthesis of metal nanoparticles with controlled shapes in hydrophobic solvents is challenging because homogeneous nucleation with high rate in these solvents is favorable for the formation of multiply twinned (MT) nanoparticles with spherical morphology. In this work, we report an inhomogeneous nucleation strategy in a binary hydrophobic solvent mediated by dimethyldistearylammonium chloride (DDAC), resulting in the coexistence of single-crystalline Ag polyhedrons and MT Ag quasi-spheres at the beginning of the reaction. In the consequent step, the MT Ag nanoparticles are selectively etched and dissolved through oxidation by NO{sub 3}{sup -} ions (from the Ag precursor, AgNO{sub 3}) with the assistance of Cl{sup -} ions (from DDAC). The dissolved Ag species are then reduced and deposited on the more stable single-crystalline polyhedrons to form Ag nanocubes. Synergy of the oxidative etching of MT particles and growth of single-crystalline particles leads to Ag nanocubes with high purity when the ripening time is long enough. For example, refluxing a mixing solvent of octyl ether and oleylamine containing AgNO{sub 3} (0.02 M) and DDAC (0.03 M) at 260 C for 1 h results in Ag nanocubes with an average edge length of 34 nm and a purity higher than 95%.

36 MATERIALS SCIENCE↗

Isotopic Tracking of Hanford 300 Area Derived Uranium in the Columbia River

A portion of the subsurface contamination at the Hanford Site, the former plutonium production facility in Washington State, affects the Columbia River. A component of this contamination, uranium (U), has variable isotopic composition due to nuclear industrial processes carried out at the site. This characteristic makes it possible to use high-precision isotopic measurements of U in environmental samples to identify even trace levels of contaminant U, determine its sources, and estimate discharge rates. Our data on river water samples indicate that as much as 3.2 kg/day can enter the Columbia River from the 300 Area of the Hanford Site, which is only a small fraction of the total load of dissolved natural background U carried by the Columbia River. This very low–level contamination can be discerned, despite further dilution to <1% of natural background U, as far as 350 km downstream from the Hanford Site. These results indicate that isotopic methods can allow the amounts of U contamination from the Hanford Site to be measured accurately enough to ascertain where they are an environmental concern, and where they are insignificant.

Christensen, John N.↗

Dissolution of Uranium-Bearing Minerals and Mobilization of Uranium by Organic Ligands in a Biologically Reduced Sediment

The stability and mobility of uranium (U) is a concern following its reductive precipitation or immobilization by techniques such as bioremediation at contaminated sites. In this study, the influences of complexing organic ligands such as citrate and ethylenediaminetetraacetate (EDTA) on the mobilization of U were investigated in both batch and column flow systems using a contaminated and bioreduced sediment. Results indicate that both reduced U(IV) and oxidized U(VI) in the sediment can be effectively mobilized with the addition of EDTA or citrate under anaerobic conditions. The dissolution and mobilization of U appear to be correlated to the dissolution of iron (Fe)- or aluminum (Al)-bearing minerals, with EDTA being more effective (with R2 0.89) than citrate (R2 <0.60) in dissolving these minerals. The column flow experiments confirm that U, Fe, and Al can be mobilized by these ligands under anoxic conditions, although the cumulative amounts of U removal constituted ~0.1% of total U present in this sediment following a limited period of leaching. This study concludes that the presence of complexing organic ligands may pose a long-term concern by slowly dissolving U-bearing minerals and mobilizing U even under a strict anaerobic environment.

54 ENVIRONMENTAL SCIENCES↗

Coal Fly Ash as a Source of Iron in Atmospheric Dust

Anthropogenic coal fly ash aerosols may represent a significant source of bioavailable iron in the open ocean. Few measurements have been made to compare the solubility of atmospheric iron from anthropogenic aerosols and other sources. We report an investigation of the iron dissolution of three fly ash samples in acidic aqueous solutions and compare the solubilities with that of Arizona test dust, a reference material of mineral dust. The effects of pH, cloud processing, and solar irradiation on Fe solubility were explored. Similar to previously reported results on mineral dust, iron in aluminosilicate phases provide predominant dissolved iron compared with iron in oxides. Iron solubility of fly ash is higher than Arizona test dust, especially at the higher pH conditions investigated. Simulated atmospheric processing elevates iron solubility due to significant changes in the morphology aluminosilicate glass, a dominantly material in fly ash particle. Iron continuously releases into the aqueous solution as fly ash particles break up into smaller fragments. The assessment of dissolved atmospheric iron deposition fluxes, and their effect on the biogeochemistry at ocean surface should be constrained by taking into account the source, environment pH, Fe speciation, and solar radiation.

01 COAL, LIGNITE, AND PEAT↗

Chromium Isotope Fractionation During Reduction of Cr(VI) Under Saturated Flow Conditions

Chromium isotopes are potentially useful indicators of Cr(VI) reduction reactions in groundwater flow systems; however, the influence of transport on Cr isotope fractionation has not been fully examined. Laboratory batch and column experiments were conducted to evaluate isotopic fractionation of Cr during Cr(VI) reduction under both static and controlled flow conditions. Organic carbon was used to reduce Cr(VI) in simulated groundwater containing 20 mg L{sup -1} Cr(VI) in both batch and column experiments. Isotope measurements were performed on dissolved Cr on samples from the batch experiments, and on effluent and profile samples from the column experiment. Analysis of the residual solid-phase materials by scanning electron microscopy (SEM) and by X-ray absorption near edge structure (XANES) spectroscopy confirmed association of Cr(III) with organic carbon in the column solids. Decreases in dissolved Cr(VI) concentrations were coupled with increases in {delta}{sup 53}Cr, indicating that Cr isotope enrichment occurred during reduction of Cr(VI). The {delta}{sup 53}Cr data from the column experiment was fit by linear regression yielding a fractionation factor ({alpha}) of 0.9979, whereas the batch experiments exhibited Rayleigh-type isotope fractionation ({alpha} = 0.9965). The linear characteristic of the column {delta}{sup 53}Cr data may reflect the contribution of transport on Cr isotope fractionation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Volumetrics of CO{sub 2} Storage in Deep Saline Formations

Concern about the role of greenhouse gases in global climate change has generated interest in sequestering CO{sub 2} from fossil-fuel combustion in deep saline formations. Pore space in these formations is initially filled with brine, and space to accommodate injected CO{sub 2} must be generated by displacing brine, and to a lesser extent by compression of brine and rock. The formation volume required to store a given mass of CO{sub 2} depends on the storage mechanism. We compare the equilibrium volumetric requirements of three end-member processes: CO{sub 2} stored as a supercritical fluid (structural or stratigraphic trapping); CO{sub 2} dissolved in pre-existing brine (solubility trapping); and CO{sub 2} solubility enhanced by dissolution of calcite. For typical storage conditions, storing CO{sub 2} by solubility trapping reduces the volume required to store the same amount of CO{sub 2} by structural or stratigraphic trapping by about 50%. Accessibility of CO{sub 2} to brine determines which storage mechanism (structural/stratigraphic versus solubility) dominates at a given time, which is a critical factor in evaluating CO{sub 2} volumetric requirements and long-term storage security.

54 ENVIRONMENTAL SCIENCES↗

Iodine-129 and Iodine-127 speciation in groundwater at the Hanford Site, U.S.: iodate incorporation into calcite

The Hanford Site, the most contaminated nuclear site in the United States, has large radioactive waste plumes containing high 129I levels. The geochemical transport and fate of radioiodine depends largely on its chemical speciation that is greatly affected by environmental factors. This study reports, for the first time, the speciation of stable and radioactive iodine in the groundwater from the Hanford Site. Iodate was the dominant species and accounts for up to 84%, followed by organo-iodine and minimal levels of iodide. The relatively high pH and oxidizing environment may have prevented iodate reduction. Our results identified that calcite precipitation caused by degassing of CO2 during deep groundwater sampling incorporated between 7 to 40% of dissolved iodine (including 127I and 129I) that was originally in the groundwater, transforming dissolved to particulate iodate during sampling. In order to understand the mechanisms underlying iodine incorporation by calcite, laboratory experiments were carried out to replicate this iodine sequestering processes. Two methods were utilized in this study, 1) addition of sodium carbonate; 2) addition of calcium chloride followed by sodium carbonate where the pH was well controlled at ~8.2, which is close to the average pH of Hanford Site groundwater. It was demonstrated that iodate was the main species incorporated into calcite and this incorporation process could be impeded by elevated pH and decreasing ionic strength in groundwater. This study provides critical information for predicting the long-term fate and transport of 129I at the Hanford Site and reveals a potential means for improved remediation strategies of 129I.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture

Powders of a Sn2S3 chalcogen-based aerogel (chalcogel) were combined with powdered polyacrylonitrile (PAN) in different mass ratios (SnS33, SnS50, and SnS70 in mass% of chalcogel), dissolved into dimethyl sulfoxide, and dropped into deionized water to form pellets of a porous PAN-chalcogel hybrid material. Pellets of these hybrid sorbents, along with pure powdered (SnSp) and granular (SnSg) forms of the chalcogel, were then used to adsorb iodine gas under both concentrated and dilute conditions. Both the SnSp and SnSg chalcogels showed very high maximum iodine loadings at 67.2 and 68.3 mass%. The maximum iodine loadings in the SnS33 and SnS50 were high at 32.8 and 53.5 mass%. In all cases, X-ray diffraction results showed the formation of Sn-I phases of SnI4 and SnI4(S8)2 revealing that the iodine binding in these materials is mainly due to a chemisorption process although some evidence also exists that supports a physisorption process.

chalcogel↗

Effect of Bubbles and Silica Dissolution on Melter Feed Rheology during Conversion to Glass

As the nuclear waste glass melter feed is converted to molten glass, the feed becomes a continuous glass-forming melt where dissolving refractory constituents are suspended together with numerous gas bubbles. Knowledge of mechanical properties of the reacting melter feed is crucial for understanding the feed-to-glass conversion as it occurs during melting. We studied the melter feed viscosity during heating and correlated it with volume fractions of dissolving quartz particles and gas phase. The measurements were performed with a rotating spindle rheometer on the melter feed heated at 5 K/min, starting at several different temperatures. The effects of undissolved quartz particles, gas bubbles, and compositional inhomogeneity on the melter feed viscosity were determined by fitting a linear relationship between log viscosity and volume fractions of suspended phases.

Effect of solids and gases on viscosity↗

Microbial Reduction of Intragrain U(VI) in Contaminated Sediment

The accessibility of precipitated, intragrain U(VI) in a contaminated sediment to microbial reduction was investigated to ascertain geochemical and microscopic transport phenomena controlling U(VI) bioavailability. The sediment was collected from the US DOE Hanford site, and contained uranyl precipitates in a form of Na-boltwoodite within the mm-sized granitic lithic fragments in the sediment. Microbial reduction was investigated in a culture of a dissimilatory metal-reducing bacterium (DMRB), Shewanella oneidensis strain MR-1, in bicarbonate solutions at pH 6.8 buffered by PIPES. Measurements of uranium concentration, speciation, and valence in aqueous and solid phases indicated that microbial reduction of intragrain U(VI) proceeded by two mechanisms: 1) sequentially coupled dissolution of intragrain uranyl precipitates, diffusion of dissolved U(VI) out of intragrain regions, and microbial reduction of dissolved U(VI); and 2) U(VI) reduction in the intragrain regions by soluble, diffusible biogenic reductants. The bioreduction rate in the first pathway was over 3 orders of magnitude slower than that in comparable aqueous solutions containing aqueous U(VI) only. The slower bioreduction rate was attributed to: 1) the release of calcium from the desorption/dissolution of calcium-containing minerals in the sediment, which subsequently altered U(VI) aqueous speciation and slowed U(VI) bioreduction and 2) alternative electron transfer pathways that reduced U(VI) in the intragrain regions and changed its dissolution and solubility behavior. The results implied that the overall rate of microbial reduction of intragrain U(VI) will be influenced by the reactive mass transfer of U(VI) and biogenic reductants within intragrain regions, and geochemical reactions controlling major ion concentrations that affect U(VI) aqueous speciation and microbial activity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Impact of uranyl-calcium-carbonato complexes on uranium(VI) adsorption to synthetic and natural sediments

Adsorption on soil and sediment solids may decrease aqueous uranium concentrations and limit its propensity for migration in natural and contaminated settings. Uranium adsorption will be controlled in large part by its aqueous speciation, with a particular dependence on the presence of dissolved calcium and carbonate. Here we quantify the impact of uranyl speciation on adsorption to both goethite and sediments from the Hanford Clastic Dike and Oak Ridge Melton Branch Ridgetop formations. Hanford sediments were preconditioned with sodium acetate and acetic acid to remove carbonate grains, and Ca and carbonate were reintroduced at defined levels to provide a range of aqueous uranyl species. U(VI) adsorption is directly linked to UO{sub 2}{sup 2+} speciation, with the extent of retention decreasing with formation of ternary uranyl-calcium-carbonato species. Adsorption isotherms under the conditions studied are linear, and K{sub d} values decrease from 48 to 17 L kg{sup -1} for goethite, from 64 to 29 L kg{sup -1} for Hanford sediments, and from 95 to 51 L kg{sup -1} for Melton Branch sediments as the Ca concentration increases from 0 to 1 mM at pH 7. Our observations reveal that, in carbonate-bearing waters, neutral to slightly acidic pH values ({approx}5) and limited dissolved calcium are optimal for uranium adsorption.

54 ENVIRONMENTAL SCIENCES↗

Dynamics of Uranyl Peroxide Nanocapsules

Discrete aqueous metal oxide polyionic clusters that include aluminum polycations, transition-metal polyoxometalates, and the actinyl peroxide clusters have captivated the interest of scientists in the realm of both their fundamental and applied chemistries. Yet the counterions for these polycations or polyanions are often ignored, even though they are imperative for solubility, crystallization, purification, and even templating cluster formation. The actinyl peroxide clusters have counterions not only external, but internal to the hollow peroxide capsules. In this study, we reveal the dynamic behavior of these internal alkali counterions via solid-state and liquid NMR experiments. These studies on two select cluster geometries, those containing 24 and 28 uranyl polyhedra, respectively, show that the capsules-like clusters are not rigid entities. Rather, the internal alkalis both have mobility inside the capsules, as well as exchange with species in the media in which they are dissolved. The alkali mobilities are affected by both what is inside the clusters as well as the composition of the dissolving medium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Formation Mechanism of Fluorescent Metal Complexes at the Li x Ni 0.5 Mn 1.5 O 4-δ /Carbonate Ester Electrolyte Interface

Electrochemical oxidation of carbonate esters at the Li x Ni 0.5 Mn 1.5 O 4-δ /electrolyte interface results in Ni/Mn dissolution and surface film formation, which negatively affect the electrochemical performance of Li-ion batteries. Ex situ X-ray absorption (XRF/XANES), Raman, and fluorescence spectroscopy, along with imaging of Li x Ni 0.5 Mn 1.5 O 4-δ positive and graphite negative electrodes from tested Li-ion batteries, reveal the formation of a variety of Mn II/III and Ni II complexes with β-diketonate ligands. These metal complexes, which are generated upon anodic oxidation of ethyl and diethyl carbonates at Li x Ni 0.5 Mn 1.5 O 4-δ , form a surface film that partially dissolves in the electrolyte. The dissolved Mn III complexes are reduced to their Mn II analogues, which are incorporated into the solid electrolyte interphase surface layer at the graphite negative electrode. This work elucidates possible reaction pathways and evaluates their implications for Li + transport kinetics in Li-ion batteries.

energy storage (including batteries and capacitors↗

Structure, Morphology, and Assembly Behavior of Kafirin

Prolamins from grains have attracted intensive attention in recent years due to their potential in satisfying the demand for environmentally friendly (biodegradable), abundantly available (sustainable), and cost-effective biomaterials. However, for kafirin, the prolamin from sorghum, its composition, structure, morphology, and self-assembly behaviors have not been fully characterized. In this paper, kafirin was extracted from the whole sorghum grain and found to contain 68, 14, 6, and 12% of α-, β-, and γ-fractions and cross-linked kafirin, respectively. Freeze-dried kafirin contained ~49% α-helix in the solid state. When dissolved in 65% (v/v) isopropanol, 60% (v/v) tert-butanol, and 85% (v/v) ethanol aqueous solvents, the relative α-helix content in kafirin increased with the decrease of solvent polarity. Structural analysis using small-angle X-ray scattering (SAXS) indicated that kafirin (2 mg/mL) took stretched and extended conformations with dimensions of 118 × 15 × 15 and 100 × 11 × 11 Å in 60% tert-butanol and 65% isopropanol, respectively. More elongated conformation of individual kafirin with high-order assembly was observed in 85% ethanol. Protein aggregation occurred as protein concentration increased in its good solvent. The morphology of kafirin assemblies captured by atomic force microscopy (AFM) revealed that kafirin protein took uniform particle morphology at low concentration, and disk-like or rod-like structures resulting from solvent evaporation induced particle interactions emerged at high concentrations. These results suggest that both protein concentration and solvent polarity can effectively regulate kafirin assemblies from thick rod-like to slim rod-like structures, a convenient way to tune the fibrillation of prolamin-based biomaterials.

60 APPLIED LIFE SCIENCES↗