Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Trans-Influence in Dinuclear Pt(III) Complexes: Electronic Structure, σ-Donation, and Pt–Pt Spin–Spin Coupling

This study investigates the trans influence in dinuclear platinum(III) complexes using a combined approach of ab initio molecular dynamics and natural localized molecular orbital (NLMO) analysis. Focusing on pivalamidate-bridged Pt III complexes with axial ligands of varying σ-donation strength, it is quantified how ligand−metal interactions propagate through the Pt−Pt bond, and how they affect bond polarization, axial water coordination, and 1 J PtPt spin−spin coupling constants. NLMO analysis reveals quantitatively that strong σ-donating ligands polarize the Pt−Pt bond, shifting the electron density toward the opposite platinum center. The polarization mechanism is identified as the primary reason for the observed reduction of 1 J PtPt , because the bond polarization diminishes the transmission of the nuclear magnetic spin-induced electron spin density through the Pt−Pt bond. Additionally, the destabilization of axial water coordination at the opposite Pt site can be rationalized through a polarizationinduced Pt IV − Pt II -like mixed-valence character.

Ab initio molecular dynamics↗
DOE OSTI2024

Extracting the electronic structure of light elements in bulk materials through a Compton scattering method in the readily accessible hard x-ray regime

Here, our Compton profile measurements of Ti and TiH 2 using readily available hard X-ray radiation at 27.5 keV, detected by both a Hitachi Vortex silicon-drift detector and a high-resolution superconducting transition-edge sensor array, are found to be in excellent accord with state-of-the-art density functional theory based calculations. The spherically averaged difference between the Compton profiles of TiH 2 and Ti is well described by an inverted parabola, supporting an itinerant behavior of the electron gas screening the protons in the Ti matrix. Our experimental approach, validated by two different detectors, extends the applicability of Compton scattering technique to the readily accessible hard x-ray regime (below 30 keV). Our study suggests possibilities for experiments at low-flux bending magnet synchrotron beamlines and paves the way for the development of tabletop Compton experiments with x-ray tubes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic Structure and Bonding of US, SUO, and US 2

Anion photoelectron spectra of US – and US 2 – were recorded using the third (355 nm) and fourth (266 nm) harmonics of an Nd:YAG laser, which yielded vertical detachment energies (VDEs) of 1.71 and 2.02 eV, respectively. The experimental results are supported by extensive relativistic ab initio calculations, primarily at the coupled cluster level of theory, with systematic sequences of correlation consistent basis sets. Calculations include the closely related SUO and SUO – molecules, as well as the oxide congeners UO/UO – and UO 2 /UO 2 – which are well-known experimentally and provide benchmark systems for the sulfide calculations. Adiabatic electron detachment energies (ADEs) are computed for UO – , UO 2 – , US – , SUO – , and US 2 – using the Feller–Peterson–Dixon (FPD) composite approach. Additionally, ADEs are determined for UO – and US – using a spinor-based coupled cluster approach where spin–orbit coupling is included at the orbital level. VDEs are derived from the ab initio results from Franck–Condon simulations of the photoelectron spectra.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Electronic Structure and Optical Properties of Designed Photo-Efficient Indoline-Based Dye-Sensitizers with D–A–π–A Framework

Seven D–A–π–A-based indoline (IND) dyes that were designed via quantitative-structure–property relationship modeling have been comprehensively investigated using computational approaches to evaluate their prospect of application in future dye-sensitized solar cells (DSSCs). An array of optoelectronic properties of the isolated dye and dyes adsorbed on a TiO 2 cluster that simulates the semiconductor were explored by density functional theory (DFT) and time-dependent DFT methods. Light absorption spectra, vertical dipole moment, shift of the conduction band of semiconductor, excited state lifetime, driving force of electron injection, photostability of the excited state, and exciton binding energy were computed. Our study showed that the presence of an internal acceptor such as pyrido[3,4-b]pyrazine (pyrazine) would influence greater the open circuit voltage (VOC), compared to the benzothiadiazole moiety. Considering the balance between the VOC and J SC (short circuit current) along with the all calculated characteristics, the IND3, IND5, and IND10 are the most suited among the designed dyes to be used as potential candidates for the photo-efficient DSSCs. Finally, the present study provides the results of rational molecular design followed by exploration of photophysical properties to be used as a valuable reference for the synthesis of photo-efficient dyes for DSSCs.

14 SOLAR ENERGY↗
DOE OSTI2018

Coordination Chemistry of a Strongly-Donating Hydroxylamine with Early Actinides: An Investigation of Redox Properties and Electronic Structure

Separations of f-block elements are a critical aspect of nuclear waste processing. Redox-based separations offer promise, but challenges remain in stabilizing and differentiating actinides in high oxidation states. The investigation of new ligand types that provide thermodynamic stabilization to high-valent actinides is essential for expanding their fundamental chemistry and to elaborate new separation techniques and storage methods. We report herein the preparation and characterization of Th and U complexes of the pyridyl-hydroxylamine ligand, N-tert-butyl-N-(pyridin-2-yl)hydroxylamine (pyNO–). Electrochemical studies performed on the homoleptic complexes [M(pyNO) 4 ] (M = Th, U) revealed significant stabilization of the U complex upon one-electron oxidation. The salt [U(pyNO) 4 ] + was isolated by chemical oxidation of [U(pyNO) 4 ]; spectroscopic and computational data support assignment as a U V cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural, electronic, and magnetic properties of CoFeVGe-based compounds: Experiment and theory

We have carried out a combined theoretical and experimental investigation of both stoichiometric and nonstoichiometric CoFeVGe alloys. In particular, we have investigated CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe bulk alloys. Our first principles calculations suggest that all four alloys show ferromagnetic order, where CoFeVGe, Co 1.25 Fe 0.75 VGe, and Co 0.75 Fe 1.25 VGe are highly spin polarized with spin polarization values of over 80%. However, the spin polarization value of CoFe 0.75 VGe is only about 60%. We have synthesized all four samples using arc melting and high-vacuum annealing at 600 °C for 48 hours. The room temperature x-ray diffraction of these samples exhibits a cubic crystal structure with disorder. All the samples show single magnetic transitions at their Curie temperatures, where the Curie temperature and high field (3T) magnetization are 288 K and 42 emu/g; 305 K and 1.5 emu/g; 238 K and 39 emu/g; and 306 K and 35 emu/g for CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic Structure Correspondence of Singlet-Triplet Scale Separation in Strained Sr2RuO4

At a temperature of roughly 1 K, Sr 2 RuO 4 undergoes a transition from a normal Fermi liquid to a superconducting phase. Even while the former is relatively simple and well understood, the superconducting state has not even been understood after 25 years of study. More recently, it has been found that critical temperatures can be enhanced by the application of uniaxial strain, up to a critical strain, after which it falls off. In this work, we take an “instability” approach and seek divergences in susceptibilities. This provides an unbiased way to distinguish tendencies to competing ground states. We show that in the unstrained compound, the singlet and triplet instabilities of the normal Fermi liquid phase are closely spaced. Under uniaxial strain, electrons residing on all orbitals contributing to the Fermiology become more coherent, while the electrons of the Ru-dxy character become heavier, and the electrons of the Ru d x z , y z characters become lighter. In the process, Im χ(q,ω) increases rapidly around q = ( 0.3 , 0.3 , 0 ) 2 π / a and q = ( 0.5 , 0.25 , 0 ) 2 π / a , while it gets suppressed at all other commensurate vectors, in particular at q = 0, which is essential for spin-triplet superconductivity. We observe that the magnetic anisotropy under strain drops smoothly, which is concomitant with the increment in singlet instability. Thus, the triplet superconducting instability remains the lagging instability of the system, and the singlet instability enhances under strain, leading to a large energy-scale separation between these competing instabilities. However, since this happens even without spin-orbit coupling, we believe it is primarily the enhancement in the spin fluctuation glue around quasi-anti-ferromagnetic vectors that drives the Cooper pairing instead of the magnetic anisotropy. At large strain, an instability to a spin density wave overtakes the superconducting one. The analysis relies on a high-fidelity, ab initio description of the one-particle properties and two-particle susceptibilities, based on the quasiparticle self-consistent GW approximation augmented by dynamical mean field theory. This approach is described and its high fidelity confirmed by comparing to observed one- and two-particle properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Electronic structure changes upon lithium intercalation into graphite – Insights from ex situ and operando x-ray Raman spectroscopy

This study probes the electrochemical intercalation mechanism of Li into graphitic carbon using x-ray Raman spectroscopy (XRS), an inelastic x-ray scattering technique. Operando and high resolution spectra of electrochemically lithiated composite graphitic electrodes at discrete states of Li uptake (stages III, II and I) show gradually changing spectral features with Li intercalation, the end state agreeing well with chemically fully lithiated LiC 6 highly oriented pyrolytic graphite (HOPG). The two most dominant changes in the XRS spectrum of the C-K edge are the reduced intensity of the $\pi$* peak and shift the onset of the σ* states to lower energies upon full lithiation. The excellent instrumental energy resolution uncovered novel spectral features and, thus, electronic changes with varying lithium content. Thus, the general spectral changes with progressing Li intercalation agree well with our accompanying DFT calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Insights on the Synthesis, Crystal and Electronic Structures, and Optical and Thermoelectric Properties of Sr 1– x Sb x HfSe 3 Orthorhombic Perovskite

We report single-phase polycrystalline powders of Sr 1–x Sb x HfSe 3 (x = 0, 0.005, 0.01), a new member of the chalcogenide perovskites, were synthesized using a combination of high temperature solid-state reaction and mechanical alloying approaches. Structural analysis using single-crystal as well as powder X-ray diffraction revealed that the synthesized materials are isostructural with SrZrSe 3 , crystallizing in the orthorhombic space group Pnma (#62) with lattice parameters a = 8.901(2) Å; b = 3.943(1) Å; c = 14.480(3) Å; and Z = 4 for the x = 0 composition. Thermal conductivity data of SrHfSe 3 revealed low values ranging from 0.9 to 1.3 W m –1 K –1 from 300 to 700 K, which is further lowered to 0.77 W m –1 K –1 by doping with 1 mol % Sb for Sr. Electronic property measurements indicate that the compound is quite insulating with an electrical conductivity of 2.9 S/cm at 873 K, which was improved to 6.7 S/cm by 0.5 mol % Sb doping. Thermopower data revealed that SrHfSe 3 is a p-type semiconductor with thermopower values reaching a maximum of 287 μV/K at 873 K for the 1.0 mol % Sb sample. The optical band gap of Sr 1–x Sb x HfSe 3 samples, as determined by density functional theory calculations and the diffuse reflectance method, is ~1.00 eV and increases with Sb concentration to 1.15 eV. Careful analysis of the partial densities of states (PDOS) indicates that the band gap in SrHfSe 3 is essentially determined by the Se-4p and Hf-5d orbitals with little to no contribution from Sr atoms. Typically, band edges of p- and d-character are a good indication of potentially strong absorption coefficient due to the high density of states of the localized p and d orbitals. This points to potential application of SrHfSe3 as absorbing layer in photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Electronic structure, pore size distribution, and sorption characterization of an unusual MOF, {[Ni(dpbz)][Ni(CN) 4 ]} n , dpbz = 1,4-bis(4-pyridyl)benzene

The monoclinic (Ni(L)[Ni(CN) 4 ] (L= 1,4-Bis(4-pyridyl) benzene) compound (defined as Ni-dpbz) is a flexible metal organic framework which assumes a pillared structure with layers defined by 2D Ni[Ni(CN) 4 ] n nets and dpbz ligands as pillars. The structure features an entrapped dpbz ligand that links between the open ends of four-fold Ni sites from two neighboring chains. This arrangement results in an unusual 5-fold pseudo square-pyramid environment for Ni and a significantly long Ni-N distance of 2.369(4) Å. Herein, using Density Functional Theory calculations, the different bonding characteristics between the 5-fold and 6-fold Ni's were determined. We found that there is weak covalent bonding between the 5-fold Ni and N in the entrapped ligand, and the 6-fold Ni-N bonds provide effective electronic conduction. The disordered dimethyl sulfoxide (DMSO) solvent molecules are not bonded to the framework. The material has a single pore with a diameter of 4.1 Å. This pore includes approximately 55% of the total free volume (based on a zero-diameter probe). The accessible pore surface area and pore volume were calculated to be 507 m 2 /g and 6.99 cm 3 /kg, respectively. The maximum amount of CO 2 that can be accommodated in the pores after DMSO is removed was found to be 204 mg/g, agreeing with the results of adsorption/desorption experiments of about 220 mg/g.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessing spin-density wave formation in La 3 Ni 2 O 7 from electronic structure calculations

Here, we employ correlated density-functional theory methods (DFT + Hubbard U) to investigate the spin-density wave state of the bilayer Ruddlesden-Popper (RP) nickelate La 3 Ni 2 O 7 which becomes superconducting under pressure. We predict that the ground state of this bilayer RP material has traits of both the double spin-stripe and the single spin-charge stripe phases proposed in the literature as it corresponds to in-plane up/up′/down/down′ diagonal stripes with up/down being high spin (formally Ni 2+ : d 8 ), and up′ /down′ being low spin (formally Ni 3+ : d 7 ). The main feature of this solution (that is insulating even at U = 0) is the dominant role of the d x 2 −y 2 bands around the Fermi level, which would become doped with the introduction of electrons via oxygen vacancies. In spite of the similarity with cuprates in terms of the dominant role of d x 2 −y 2 bands, some differences are apparent in the magnetic ground state of La 3 Ni 2 O 7 : the antiferromagnetic out-of-plane coupling within the bilayer (linked to the d z 2 orbitals forming a spin-singlet-like configuration) is found to be the dominant one while in-plane interactions are reduced due to the stripe order of the ground state. With pressure, this striped magnetic ground state remains similar in nature but the increase in bandwidth quickly transitions La 3 Ni 2 O 7 into a metallic state with all the activity close to the Fermi level involving, to a large extent, d x 2 −y 2 orbitals. This is reminiscent of the cuprates and may provide key insights into how superconductivity arises in this material under pressure.

LaBollita, Harrison↗
DOE OSTI2025

Frontal polymerization of thermosets to enable vacuum-formed structural electronics

Material design and accessible manufacturing are often at odds with each other, calling for creative solutions to adapt high-performance materials to available processes. This challenge is represented well by in-mold electronics, an innovative approach to the manufacture of 3D circuitry and electronic components that offers game-changing advantages. In-mold electronics relies on vacuum forming processes, which are historically limited to thermoplastics. Extending these methods to include thermosets would enable manufacturing of robust components with desirable properties. Here, we provide a solution to make thermoset materials amenable to vacuum forming. Specifically, an ambient polymerization is used to transition a liquid monomeric solution to an elastomeric gel. These free-standing gels can then be vacuum formed, and the reaction can be completed via frontal polymerization. Thermoset materials produced with this method have properties that provide benefits over traditionally employed thermoplastic substrates and enable 3D device integration into environmentally demanding architectural, automotive, and extraterrestrial structures.

Fowler, Hayden Elise [Sandia National Laboratories↗
DOE OSTI2016

Evaluating the Free Energies of Solvation and Electronic Structures of Lithium‐Ion Battery Electrolytes

Abstract Adaptive biasing force molecular dynamics simulations and density functional theory calculations were performed to understand the interaction of Li + with pure carbonates and ethylene carbonate (EC)‐based binary mixtures. The most favorable Li carbonate cluster configurations obtained from molecular dynamics simulations were subjected to detailed structural and thermochemistry calculations on the basis of the M06‐2X/6‐311++G(d,p) level of theory. We report the ranking of these electrolytes on the basis of the free energies of Li‐ion solvation in carbonates and EC‐based mixtures. A strong local tetrahedral order involving four carbonates around the Li + was seen in the first solvation shell. Thermochemistry calculations revealed that the enthalpy of solvation and the Gibbs free energy of solvation of the Li + ion with carbonates are negative and suggested the ion–carbonate complexation process to be exothermic and spontaneous. Natural bond orbital analysis indicated that Li + interacts with the lone pairs of electrons on the carbonyl oxygen atom in the primary solvation sphere. These interactions lead to an increase in the carbonyl (C=O) bond lengths, as evidenced by a redshift in the vibrational frequencies [ν(C=O)] and a decrease in the electron density values at the C=O bond critical points in the primary solvation sphere. Quantum theory of atoms in molecules, localized molecular orbital energy decomposition analysis (LMO‐EDA), and noncovalent interaction plots revealed the electrostatic nature of the Li + ion interactions with the carbonyl oxygen atoms in these complexes. On the basis of LMO‐EDA, the strongest attractive interaction in these complexes was found to be the electrostatic interaction followed by polarization, dispersion, and exchange interactions. Overall, our calculations predicted EC and a binary mixture of EC/dimethyl carbonate to be appropriate electrolytes for Li‐ion batteries, which complies with experiments and other theoretical results.

Shakourian‐Fard, Mehdi↗
DOE OSTI2026

Bond Dissociation Energy, Ionization Energy, and Electronic Structure of Thorium Dimer

Diatomic thorium, Th 2 , has been investigated using a laser ablation, supersonic expansion source to produce the molecule and resonant two-photon ionization spectroscopy to measure its bond dissociation energy (BDE) and ionization energy (IE). The molecule has a high density of states in the vicinity of its bond dissociation energy, leading to rapid predissociation as soon as this energy is exceeded. The BDE is identified from this predissociation threshold as D 0 (Th 2 ) = 2.857(7) eV, where the assigned error limit is provided in parentheses in units of the last quoted digit. Similarly, the one-photon ionization threshold has been measured, providing the ionization energy IE(Th 2 ) = 5.042(4) eV. Together with a thermochemical cycle and the atomic ionization energy, these values provide the BDE of the cation, giving D 0 (Th 2 + ) = 4.122(8) eV. Computations show that Th 2 has three nearly degenerate low-lying electronic states (1 3 Σ u + , 1 1 Σ g + , and 1 3 Δ g ) with bonding dominated by 7s and 6d orbitals, indicating predominantly transition-metal-like behavior. The 1 3 Σ u + state exhibits a triple bond, whereas the 1 1 Σ g + and 1 3 Δ g states possess quadruple-bond character and correspondingly shorter bonds. Although 1 3 Σ u + is predicted to be the lowest state without spin–orbit coupling, the large spin–orbit stabilization of the 1 3 Δ g state makes its Ω = 1 g component the ground state. Furthermore, the calculated dissociation energy (2.840 eV) and ionization energy of Th 2 (5.098 eV) are both in excellent agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stoichiometry of the Core Determines the Electronic Structure of Core-Shell III-V/II-VI Nanoparticles.

Recently, III-V quantum dots (QDs) emerged as an environmentally friendly alternative to CdSe; however, they exhibit broader emission spectra and inferior photoluminescence quantum yield. Here, we report a computational study of the optoelectronic properties of InxPz and InxGayPz QDs interfaced with zinc chalcogenide shells. Using density functional theory, we show that fine-tuning the composition of the core is critical to achieving narrow emission lines. We show that core-shell nanoparticles, where the core has the same diameter but different stoichiometries, may absorb and emit at different wavelengths, leading to broad absorption and emission spectra. The value of the fundamental gap of the core-shell particles depends on the ratio between the number of group III and P atoms in the core and is maximized for the 1:1 composition. We also show that the interplay between quantum confinement and strain determines the difference in the electronic properties of III-V QDs interfaced with ZnS or ZnSe shells.

Rusishvili, Mariami↗
DOE OSTI2023

Electronic structure of Co 3 d states in the Kitaev material candidate honeycomb cobaltate Na 3 Co 2 SbO 6 probed with x-ray dichroism

The recent prediction that honeycomb lattices of Co 2+ (3d 7 ) ions could host dominant Kitaev interactions provides an exciting direction for exploration of new routes to stabilizing Kitaev’s quantum spin liquid in real materials. Na 3 Co 2 SbO 6 has been singled out as a potential material candidate provided that spin and orbital moments couple into a J eff = $\frac{1}{2}$ ground state, and that the relative strength of trigonal crystal field and spin-orbit coupling acting on Co ions can be tailored. Using x-ray linear dichroism (XLD) and x-ray magnetic circular dichroism (XMCD) experiments, alongside configuration interaction calculations, we confirm the counterintuitive positive sign of the trigonal crystal field acting on Co 2+ ions and test the validity of the J eff = $\frac{1}{2}$ description of the electronic ground state. Furthermore, the results lend experimental support to recent theoretical predictions that a compression (elongation) of CoO 6 octahedra along (perpendicular to) the trigonal axis would drive this cobaltate toward the Kitaev limit, assuming the J eff = $\frac{1}{2}$ character of the electronic ground state is preserved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗