Search NASA⌕ Search

SEARCH · Search NASA

Results for “error fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

A seasonal climate model for earth

A simple seasonal climate model for earth is developed on the basis of a few terms extracted from monthly and zonally averaged climatic data fields represented in latitude by Legendre polynomials and in time by Fourier series. This simple, physically motivated model accounts for the gross features of the present zonally averaged seasonal climate (root mean square error of two deg C). The sensitivities of the seasonal model and a corresponding mean annual model are approximately equal if ice and snow lines (for albedo purposes) are attached to certain mean-annual and instantaneous isotherms. More dynamics (in particular, cryospheric) are needed in the seasonal model to explain the relationship between glacial rhythms and changes in the earth's orbital elements.

North, G. R.↗

SAR - An instrument for planetary geodesy and navigation

Analysis to define an optimal data plan and to define achievable accuracy levels in determination of the physical parameters, global topography of the planet, and refined orbital element estimates of a spacecraft borne synthetic aperture radar (SAR) placed in a near polar circular orbit of 300 km altitude around the planet Venus is presented. It is shown that radar surface images can be used to improve knowledge of physical parameters of Venus, and the improvement in orbit accuracy can reduce navigational uncertainties derivable from conventional Doppler ratio tracking data, yielding a more precise history of the orbits for sensing the low order gravity field of the planet. Data plan strategies in terms of selection of ground points and their spatial distribution are related to achievable accuracy of the solution parameters, and the influence of spacecraft orbit errors on the solution accuracy was discussed.

Mohan, S. N.↗

Contrast reduction by the atmosphere and retrieval of nonuniform surface reflectance

A radiative transfer model is developed which gives the upward radiance at nadir for any 1-D Lambertian surface reflectance. This model is used to depict the atmospheric effect on the transmittance of contrast for any 1-D surface reflectance. Here by contrast we mean a general variation of the radiation field across the image. With the aid of this model an inversion algorithm is developed for retrieval of true surface reflectance from high resolution satellite data (e.g., Landsat). This inversion technique can be a useful tool for extraction of surface reflectance from satellite data in the case of a surface reflectance variable in one dimension only (e.g., seashore or near borders of big fields). A sensitivity study of the inversion procedure on the knowledge of atmospheric parameters and sensor calibration was performed. It is shown that this inversion technique is stable even in the presence of errors in the sensor calibration and the atmospheric parameters. The method was applied to Landsat data in two wavelengths. The results show reasonable dependence of the derived surface reflectance on the distance from the seashore.

Mekler, Y.↗

Photoelectric photometry of selected SAO stars. III

Photometric observations of 131 SAO stars for use in calibrating data obtained from the Near Infrared Photographic Sky Survey (NIPSS) are reported. The serial numbers of the primary NIPSS program fields in which the photometry was done are shown along with the approximate position of each field and the number of stars observed in each field. The observations are listed, showing the SAO numbers of the program stars, their 1950 equatorial coordinates, the V magnitudes, and the (V-R) and (V-I) color indices. The mean errors in magnitudes and color indices obtained by averaging deviations from the mean for each star are on the order of 0.02 mag.

Scharlach, W. W. G.↗

Computations of atmospheric angular momentum, with emphasis on the merit period

Three-dimensional wind and pressure fields used to calculate effective angular momentum functions (EAMFs) for earth rotation/polar motion are produced by a complex 3-step system at the U.S. National Meteorological Center. The resulting series of functions have errors which can be estimated by comparisons with similar series produced by the European Center for Medium Range Weather Forecasts. For the axial wind component, related to length of day (lod) changes, the small differences between the two series of atmospheric angular momentum (AAM) are confined to the tropics and the higher latitudes of the Southern Hemisphere. In addition, differences between the seasonal components of the AAM series and those of lod are found to be significantly reduced by including the entire stratosphere's momentum. Comparisons of the EAMFs for 8 calendar years indicate substantial interannual variability exists in the annual amplitudes of these forcing terms. In particular, the axial AAM showed quite different behavior from normal in 1983 and 1984, the years of the MERIT campaign. These two years showed very high and low annual amplitudes for AAM, respectively, which can be attributed to the effect of the tropical Pacific sea surface warming (El Nino) and its aftermath.

Salstein, David A.↗

Improved Coplanar Waveguides

Three new types of coplanar waveguide transmission lines proposed: suspended, striplinelike suspended, and inverted. Numerical analyses of propagation of electromagnetic fields of new and of more-conventional plain and conductor-backed coplanar waveguides showed new waveguides offered several advantages over conventional ones. Configurations promise lower attenuation and reduce effects of manufacturing errors.

Simons, Rainee N.↗

Observations of optical counterparts of Gamma-Ray bursts

This is a final report for a contract begun in Dec. 1987 and ended in Mar. 1989 to use the existing Lincoln Laboratory Experimental Test Site in Socorro, NM to search for optical counterparts to gamma-ray bursts. The objective was to develop an autonomous staring system to search for stationary, transient optical flashes. The search was to use an existing 31-inch telescope equipped with a sensitive video detector. The approach for the search was to develop real-time processing software to monitor the video signal from the detector and to record any transient, point-like flashes that occurred in the field of view. The system would have been able to detect fainter flashes (B is approximately 15(sup m) in 1/30 s, delta(m(sub v)) = 0.25(sup m)) than other systems but lacked a large field of view (only 1.2 deg diameter) necessary to give a high probability of detecting a random flash on the sky. As such, the plan was to monitor known gamma-ray burst error boxes and wait for a repetition of an earlier event. The high payoff of good sensitivity with high angular resolution (1 pixel = 10sec) and good time resolution (30 s) to allow post-burst searches warranted funding if the cost was not prohibitive. The contract began in the middle of the three-year cycle for High Energy Astrophysics Gamma-Ray Astronomy Research and Analysis Program. This final report briefly describes the portion of the plan completed under the original contract.

Knight, Frederick K.↗

Computational modelling of Er(3+): Garnet laser materials

The Er(3+) ion has attracted a lot of interest for four reasons: (1) Its (4)I(sub 13/2) yields (4)I(sub 15/2) transition lases in the eyesafe region near 1.5 micron; (2) the (4)I(sub 13/2) transition lases near 2.8 micron, an important wavelength for surgical purposes; (3) it displays surprisingly efficient upconversion with lasing observed at 1.7, 1.2, 0.85, 0.56, 0.55, and 0.47 micron following 1.5 micron pumping; and (4) it has absorption bands at 0.96 and 0.81 micron and thus can be diode pumped. However, properties desirable for upconversion reduce the efficiency of 1.5 and 3 micron laser operation and vice versa. Since all of the processes are influenced by the host via the crystal field induced stark splittings in the Er levels, this project undertook modelling of the host influence on the Er lasinng behavior. While growth and measurement of all ten Er(3+) doped garnets is the surest way of identifying hosts which maximize upconversion (or conversly, 1.5 and 3 micron performance), it is also expensive - costing approximately $10,000/material or approximately $100,000 for the materials computationally investigated here. The calculations were performed using a quantum mechanical point charge model developed by Clyde Morrison at Harry Diamond Laboratories. The programs were used to fit the Er:YAG experimental energy levels so that the crystal field parameters, B(sub nm) could be extracted. From these radial factors, rho (sub n) were determined for Er(3+) in garnets. These, in combination with crystal field components, Anm, available from X-ray data, were used to predict energy levels for Er in the other nine garnet hosts. The levels in Er:YAG were fit with an rms error of 12.2/cm over a 22,000/cm range. Predicted levels for two other garnets for which literature values were available had rms errors of less than 17/cm , showing the calculations to be reliable. Based on resonances between pairs of calculated stark levels, the model predicts GSGG as the best host for 1.5 micron laser operation, GSGG or YSAG as the best host for a 2.8 micron operation, and LuGG as the best host for an upconversion material.

Spangler, Lee H.↗

The Circumstellar Imager: Direct detection of extra-solar planetary systems

The Astrometric Imaging Telescope (AIT) is designed to probe the circumstellar environment by both direct imaging and indirect astrometric measurements. The Circumstellar Imager (CI) is a coronagraphic camera and is the direct imaging component of the AIT. The CI is designed to obtain high-sensitivity images of the circumstellar region. It provides crucial non-inferential information relating to the frequency, origin, and evolution of planetary systems and all forms of circumstellar matter. Such imaging is usually limited by the scattered and diffracted light halos of the star itself, which are greatly suppressed in the CI by mating a novel high-efficiency coronagraph with a phase-compensated optical system. For faint point sources in the circumstellar region, the CI will have a sensitivity in excess of 5 magnitudes fainter than the as-designed Hubble Space Telescope (HST). Laboratory data are shown for the coronagraph, which, in a diffraction-limited environment, is capable of suppressing the stellar diffraction sidelobes by several orders of magnitude without significant sacrifice of field of view. In order to realize the high rejection levels inherent in the coronagraph design, it is necessary to limit scatter in the optical systems, imposing a mid-spatial frequency figure error requirement an order of magnitude smaller than that of the HST. Experimental data directed toward meeting this requirement are also shown.

Ftaclas, Christ↗

Permeable Surface Corrections for Ffowcs Williams and Hawkings Integrals

The acoustic prediction methodology discussed herein applies an acoustic analogy to calculate the sound generated by sources in an aerodynamic simulation. Sound is propagated from the computed flow field by integrating the Ffowcs Williams and Hawkings equation on a suitable control surface. Previous research suggests that, for some applications, the integration surface must be placed away from the solid surface to incorporate source contributions from within the flow volume. As such, the fluid mechanisms in the input flow field that contribute to the far-field noise are accounted for by their mathematical projection as a distribution of source terms on a permeable surface. The passage of nonacoustic disturbances through such an integration surface can result in significant error in an acoustic calculation. A correction for the error is derived in the frequency domain using a frozen gust assumption. The correction is found to work reasonably well in several test cases where the error is a small fraction of the actual radiated noise. However, satisfactory agreement has not been obtained between noise predictions using the solution from a three-dimensional, detached-eddy simulation of flow over a cylinder.

Lockard, David P.↗

Diagnostic Techniques to Elucidate the Aerodynamic Performance of Acoustic Liners

In support of Topic A.2.8 of NASA NRA NNH10ZEA001N, the University of Florida (UF) has investigated the use of flow field optical diagnostic and micromachined sensor-based techniques for assessing the wall shear stress on an acoustic liner. Stereoscopic particle image velocimetry (sPIV) was used to study the velocity field over a liner in the Grazing Flow Impedance Duct (GFID). The results indicate that the use of a control volume based method to determine the wall shear stress is prone to significant error. The skin friction over the liner as measured using velocity curve fitting techniques was shown to be locally reduced behind an orifice, relative to the hard wall case in a streamwise plane centered on the orifice. The capacitive wall shear stress sensor exhibited a linear response for a range of shear stresses over a hard wall. PIV over the liner is consistent with lifting of the near wall turbulent structure as it passes over an orifice, followed by a region of low wall shear stress.

June, Jason↗

Testing the Accuracy of Data-Driven MHD Simulations of Active Region Evolution

Models for the evolution of the solar coronal magnetic field are vital for understanding solar activity, yet the best measurements of the magnetic field lie at the photosphere, necessitating the development of coronal models which are "data-driven" at the photosphere. We present an investigation to determine the feasibility and accuracy of such methods. Our validation framework uses a simulation of active region (AR) formation, modeling the emergence of magnetic flux from the convection zone to the corona, as a ground-truth data set, to supply both the photospheric information and to perform the validation of the data-driven method. We focus our investigation on how the accuracy of the data-driven model depends on the temporal frequency of the driving data. The Helioseismic and Magnetic Imager on NASA's Solar Dynamics Observatory produces full-disk vector magnetic field measurements at a 12-minute cadence. Using our framework we show that ARs that emerge over 25 hours can be modeled by the data-driving method with only approximately 1 percent error in the free magnetic energy, assuming the photospheric information is specified every 12 minutes. However, for rapidly evolving features, under-sampling of the dynamics at this cadence leads to a strobe effect, generating large electric currents and incorrect coronal morphology and energies. We derive a sampling condition for the driving cadence based on the evolution of these small-scale features, and show that higher-cadence driving can lead to acceptable errors. Future work will investigate the source of errors associated with deriving plasma variables from the photospheric magnetograms as well as other sources of errors, such as reduced resolution, instrument bias, and noise.

Leake, James E.↗

Solar Activity Modeling: From Subgranular Dynamical Scales to the Solar Cycles

Dynamical effects of solar magnetoconvection span a wide range spatial and temporal scales that extends from the interior to the corona and from fast turbulent motions to the global-Sun magnetic activity. To study the solar activity on short temporal scales (from minutes to hours), we use 3D radiative MHD simulations that allow us to investigate complex turbulent interactions that drive various phenomena, such as plasma eruptions, spontaneous formation of magnetic structures, funnel-like structures and magnetic loops in the corona, and others. In particular, we focus on multi-scale processes of energy exchange across the different layers, which contribute to the corona heating and eruptive dynamics, as well as interlinks between different layers of the solar interior and atmosphere. For modeling the global-scale activity we use the data assimilation approach that has demonstrated great potential for building reliable long-term forecasts of solar activity. In particular, it has been shown that the Ensemble Kalman Filter (EnKF) method applied to the Parker-Kleeorin-Ruzmakin dynamo model is capable of predicting solar activity up to one sunspot cycle ahead in time, as well as estimating the properties of the next cycle a few years before it begins. In this presentation, using the available magnetogram data, we discuss development of the methodology and forecast quality criteria (including forecast uncertainties and sources of errors). We demonstrate the influence of observational limitation on the prediction accuracy. We present the EnKF predictions of the upcoming Solar Cycle 25 based on both the sunspot number series and observed magnetic fields, and discuss the uncertainties and potential of the data assimilation approach for modeling and forecasting the solar activity.

Kitiashvili, I. N.↗

Solar Activity Modeling: From Subgranular Dynamical Scales to the Solar Cycles

The dynamical effects of solar magnetoconvection span a wide range spatial and temporal scales that extend from the interior to the corona and from fast turbulent motions to global magnetic activity. To study the solar activity on short temporal scales (from minutes to hours), we use 3D radiative MHD simulations that allow us to investigate complex turbulent interactions that drive various phenomena, such as plasma eruptions, spontaneous formation of magnetic structures, funnel-like structures and magnetic loops in the corona, and others. In particular, we focus on multi-scale processes of energy exchange across layers of the solar interior and atmosphere, which contribute to coronal heating and eruptive dynamics. For modeling global-scale activity, we use a data assimilation approach that has demonstrated great potential for building reliable long-term forecasts of solar activity. In particular, it has been shown that the Ensemble Kalman Filter (EnKF) method applied to the Parker-Kleeorin-Ruzmakin dynamo model is capable of predicting solar activity up to one sunspot cycle ahead in time, as well as estimating the properties of the next cycle a few years before it begins. In this presentation, using the available magnetogram data, we discuss development of the methodology and forecast quality criteria (including forecast uncertainties and sources of errors). We demonstrate the influence of observational limitations on prediction accuracy, and we present the EnKF predictions of the upcoming Solar Cycle (25) based on both the sunspot number series and observed magnetic fields and discuss the uncertainties and potential of the data assimilation approach for modeling and forecasting solar activity.

Kitiashvili, I. N.↗

Improving Carbon Estimation of Large Tropical Trees by Linking Airborne Lidar Crown Size to Field Inventory

Quantifying tropical aboveground biomass (agb) is an outstanding challenge that requires knowledge on the 3D structure of forests. Recent studies suggest that the uncertainty in estimating agb of large trees is significantly reduced if tree height and crown size are accounted for in addition to the traditional trunk diameter and wood density. Due to the fact that field inventory techniques are not adapted to characterize the 3D forest structure, crown size metrics (e.g. height and radius) are commonly estimated as a function of trunk diameter using allometric models with limitations in explaining crown variability. Airborne lidar techniques have the potential for characterizing tree height and crown size but are not adapted to estimate trunk diameter, which is a strong predictor of agb. Here, we investigate the synergy of field inventory and airborne lidar techniques to characterize the forest structure by assessing the uncertainty introduced by the field-based allometric models in the estimation of agb at the tree-level. We focus in 1454 large individual trees (trunk diameter > 60 cm) located within the La Selva Biological Station for which we dispose of field observations (trunk diameter and wood density) and lidar derived metrics (tree height and crown radius). We show that the field-based allometric models overestimate tree height and underestimate crown radius. As a result, the allometric approach overestimates the tree-level agb in 0.8 Mg when considering the 1454 individuals and the errors can reach more than 50% of the agb of individual trees. These errors on the large trees agb highly impact on the plot-level results and then propagate to the estimation of carbon stocks at the regional and national-levels.

Clark, David↗

Validation, Comparison, and Integration of GOCI, AHI, MODIS, MISR, and VIIRS Aerosol Optical Depth Over East Asia During the 2016 KORUS-AQ Campaign

Recently launched multichannel geostationary Earth orbit (GEO) satellite sensors, such as the Geostationary Ocean Color Imager (GOCI) and the Advanced Himawari Imager (AHI), provide aerosol products over East Asia with high accuracy, which enables the monitoring of rapid diurnal variations and the transboundary transport of aerosols. Most aerosol studies to date have used low Earth orbit (LEO) satellite sensors, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Multi-angle Imaging Spectroradiometer (MISR), with a maximum of one or two overpass daylight times per day from midlatitudes to low latitudes. Thus, the demand for new GEO observations with high temporal resolution and improved accuracy has been significant. In this study the latest versions of aerosol optical depth (AOD) products from three LEO sensors – MODIS (Dark Target, Deep Blue, and MAIAC), MISR, and the Visible/Infrared Imager Radiometer Suite (VIIRS), along with two GEO sensors (GOCI and AHI), are validated, compared, and integrated for a period during the Korea–United States Air Quality Study (KORUS-AQ) field campaign from 1 May to 12 June 2016 over East Asia. The AOD products analyzed here generally have high accuracy with high R (0.84–0.93) and low RMSE (0.12–0.17), but their error characteristics differ according to the use of several different surface-reflectance estimation methods. High-accuracy near-real-time GOCI and AHI measurements facilitate the detection of rapid AOD changes, such as smoke aerosol transport from Russia to Japan on 18–21 May 2016, heavy pollution transport from China to the Korean Peninsula on 25 May 2016, and local emission transport from the Seoul Metropolitan Area to the Yellow Sea in South Korea on 5 June 2016. These high-temporal-resolution GEO measurements result in more representative daily AOD values and make a greater contribution to a combined daily AOD product assembled by median value selection with a 0.5∘×0.5∘ grid resolution. The combined AOD is spatially continuous and has a greater number of pixels with high accuracy (fraction within expected error range of 0.61) than individual products. This study characterizes aerosol measurements from LEO and GEO satellites currently in operation over East Asia, and the results presented here can be used to evaluate satellite measurement bias and air quality models.

Myungje Choi↗

Thermal Inspection of Low Emissivity Surfaces Using a Pulsed Light Emitting Diodes (PLED) Heat Source

Thermal inspections of a structure typically utilize a flash or quartz lamp heat source located on the same side of an infrared camera. The heat source provides light energy for heating while the infrared camera measures the surface transient temperature response. The inspection can be difficult for low emissivity surfaces for several reasons. First, the high intensity light can reflect off the surface and cause “burn-in” to the camera’s detector. The “burn-in” can take time for the sensors to recover and potentially damage the detector. Secondly, the heat source after pulsing, has a transient cool down component. The cool down component can be reflected and therefore superimposed over the structure’s thermal response which can cause an error (false defect indications) in the inspection. Lastly, the heat source is spectrally broad and therefore while heating, infrared components of the heat source can produce non-uniformity in the measured temperature field. Typically for the inspection of reflective surfaces, paint or other emissivity enhancing coatings are applied before inspection. In this paper, a pulsed light emitting diodes (PLED) heat source is used. The PLED heat source is spectrally narrow, contained within the visible band, and therefore not detectable by the infrared camera. The PLED heat source is configured to reduce any transient cool down components that could produce false defect indications. The PLED thermal inspections are compared to commercially available flash thermography inspections on unpainted aluminum samples with simulated corrosion and additively manufactured Ti-6AL-4V metal specimens.

thermal nondestructive evaluation↗

Thermal Inspection of Low Emissivity Surfaces Using a Pulsed Light Emitting Diodes (PLED) Heat Source

Thermal inspections of a structure typically utilize a flash or quartz lamp heat source located on the same side of an infrared camera. The heat source provides light energy for heating while the infrared camera measures the surface transient temperature response. The inspection can be difficult for low emissivity surfaces for several reasons. First, the high intensity light can reflect off the surface and cause “burn-in” to the camera’s detector. The “burn-in” can take time for the sensors to recover and potentially damage the detector. Secondly, the heat source after pulsing, has a transient cool down component. The cool down component can be reflected and therefore superimposed over the structure’s thermal response which can cause an error (false defect indications) in the inspection. Lastly, the heat source is spectrally broad and therefore while heating, infrared components of the heat source can produce non-uniformity in the measured temperature field. Typically for the inspection of reflective surfaces, paint or other emissivity enhancing coatings are applied before inspection. In this paper, a pulsed light emitting diodes (PLED) heat source is used. The PLED heat source is spectrally narrow, contained within the visible band, and therefore not detectable by the infrared camera. The PLED heat source is configured to reduce any transient cool down components that could produce false defect indications. The PLED thermal inspections are compared to commercially available flash thermography inspections on unpainted aluminum samples with simulated corrosion and additively manufactured Ti-6AL-4V metal specimens.

thermal nondestructive evaluation↗