Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Structural, dielectric and magnetic properties of Bi{sub 0.8}Ba{sub 0.2}Fe{sub 0.6}Mn{sub 0.4}O{sub 3} ceramic

Polycrystalline Bi{sub 0.8}Ba{sub 0.2}Fe{sub 0.6}Mn{sub 0.4}O{sub 3} ceramic was synthesized via conventional two stage solid state reaction method. The crystal structure is examined via powder x-ray diffraction and Rietveld refinement revealed that the sample has a rhombohedral crystal structure (space group R3c). The dielectric response of the sample was analyzed in the frequency range 10 Hz to 5 MHz at different temperature. The values of dielectric constant (ε′) and dielectric loss factor (tan δ) increases with increasing temperature at different frequencies which may be the result of increase in the number of charge carriers and their mobilities due to the thermal activation. M-H hysteresis loop was recorded at room temperature up to a field of 15 kOe which shows that there is slightly enhancement in magnetization with co-doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new multi-dimensional general relativistic neutrino hydrodynamics code for core-collapse supernovae. IV. The neutrino signal

Considering six general relativistic, two-dimensional (2D) supernova (SN) explosion models of progenitor stars between 8.1 and 27 M {sub ☉}, we systematically analyze the properties of the neutrino emission from core collapse and bounce to the post-explosion phase. The models were computed with the VERTEX-COCONUT code, using three-flavor, energy-dependent neutrino transport in the ray-by-ray-plus approximation. Our results confirm the close similarity of the mean energies, (E), of ν-bar {sub e} and heavy-lepton neutrinos and even their crossing during the accretion phase for stars with M ≳ 10 M {sub ☉} as observed in previous 1D and 2D simulations with state-of-the-art neutrino transport. We establish a roughly linear scaling of 〈E{sub ν-bar{sub e}}〉 with the proto-neutron star (PNS) mass, which holds in time as well as for different progenitors. Convection inside the PNS affects the neutrino emission on the 10%-20% level, and accretion continuing beyond the onset of the explosion prevents the abrupt drop of the neutrino luminosities seen in artificially exploded 1D models. We demonstrate that a wavelet-based time-frequency analysis of SN neutrino signals in IceCube will offer sensitive diagnostics for the SN core dynamics up to at least ∼10 kpc distance. Strong, narrow-band signal modulations indicate quasi-periodic shock sloshing motions due to the standing accretion shock instability (SASI), and the frequency evolution of such 'SASI neutrino chirps' reveals shock expansion or contraction. The onset of the explosion is accompanied by a shift of the modulation frequency below 40-50 Hz, and post-explosion, episodic accretion downflows will be signaled by activity intervals stretching over an extended frequency range in the wavelet spectrogram.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma assisted NH 3 /H 2 /air ignition in nanosecond discharges with non-equilibrium energy transfer

Ammonia (NH 3 ), with its high energy density and easiness to store and transport as a hydrogen carrier, has become a promising alternative green fuel. However, its adoption in power generation is hindered by challenges such as low burning velocity, slow low-temperature oxidation, high NO x emissions, and ignition difficulty. Here, this work computationally investigates the effects of non-equilibrium energy transfer by nanosecond discharges on NH 3 ignition and flame propagation in an NH 3 /H 2 /air flow at 700 K and 1 atm. The simulation results demonstrate that NH 3 /air mixtures require a large ignition energy due to their large critical ignition radius. It is shown that adding 30 % hydrogen significantly reduces the critical ignition radius and minimum ignition energy. Two-dimensional modeling further shows a non-monotonic dependence of ignition kernel volume on the applied voltage and reduced electric field. The optimum ignition enhancement occurs at 200 Td where the generation of electronically excited species and radicals including N 2 (B), O( 1 D) and OH becomes most efficient. Higher voltages divert electron energy toward ionization, which makes it less effective for NH 3 ignition. The study also identifies an optimal electrode gap size for a given pulse energy. Smaller gap sizes increase deposited energy density, raising temperature and radical concentrations. However, excessive reduction of the gap distance reduces flame propagation speed due to the flame stretch effect in rich mixtures with the effective Lewis number greater than unity. A nonlinear relationship between pulse repetition frequency and ignition kernel volume is observed in a nanosecond pulsed high frequency discharge (NPHFD). An optimal frequency range of 200 kHz to 2 MHz is found when two pulses are used. In addition, an optimal number of pulses exists for each pulse repetition frequency, with higher frequencies requiring more pulses to maximize the overlap region. These findings provide critical insights on developing controlled plasma discharge techniques for efficient NH 3 ignition in reactive flows within internal combustion engines and gas turbines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Planck 2018 results: III. High frequency instrument data processing and frequency maps

This paper presents the High Frequency Instrument (HFI) data processing procedures for the Planck 2018 release. Major improvements in mapmaking have been achieved since the previous Planck 2015 release, many of which were used and described already in an intermediate paper dedicated to the Planck polarized data at low multipoles. These improvements enabled the first significant measurement of the reionization optical depth parameter using Planck-HFI data. This paper presents an extensive analysis of systematic effects, including the use of end-to-end simulations to facilitate their removal and characterize the residuals. The polarized data, which presented a number of known problems in the 2015 Planck release, are very significantly improved, especially the leakage from intensity to polarization. Calibration, based on the cosmic microwave background (CMB) dipole, is now extremely accurate and in the frequency range 100-353 GHz reduces intensity-to-polarization leakage caused by calibration mismatch. The Solar dipole direction has been determined in the three lowest HFI frequency channels to within one arc minute, and its amplitude has an absolute uncertainty smaller than 0.35 μK, an accuracy of order 10 -4 . This is a major legacy from the Planck HFI for future CMB experiments. The removal of bandpass leakage has been improved for the main high-frequency foregrounds by extracting the bandpass-mismatch coefficients for each detector as part of the mapmaking process; these values in turn improve the intensity maps. This is a major change in the philosophy of "frequency maps", which are now computed from single detector data, all adjusted to the same average bandpass response for the main foregrounds. End-to-end simulations have been shown to reproduce very well the relative gain calibration of detectors, as well as drifts within a frequency induced by the residuals of the main systematic effect (analogue-to-digital convertor non-linearity residuals). Using these simulations, we have been able to measure and correct the small frequency calibration bias induced by this systematic effect at the 10 -4 level. There is no detectable sign of a residual calibration bias between the first and second acoustic peaks in the CMB channels, at the 10 -3 level.

79 ASTRONOMY AND ASTROPHYSICS↗

Excitation frequency dependent mode manipulation in radio-frequency atmospheric argon glow discharges

An experimental investigation is presented to characterize the dependence of discharge operation modes ({alpha} and {gamma} modes) and their transition on excitation frequency in radio-frequency atmospheric argon glow discharges. The current-voltage characteristics are used to distinguish the {alpha} and {gamma} modes at an excitation frequency range of 5-24 MHz. The operation regime of {alpha} mode with stable and uniform discharge in large volume is found to expand at higher excitation frequency. It is shown that, when excitation frequency is below 10 MHz, the discharge evolves directly into {gamma} mode after gas breakdown and, when excitation frequency is above 10 MHz, the discharge operates in the coexistence mode of {alpha} and {gamma} after mode transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin-Transfer-Torque Oscillator with an Antiferromagnetic Exchange-Coupled Composite Free Layer

We present an antiferromagnetically exchange-coupled composite (soft and hard layers) spin torque oscillator (AF-ECC STO) and demonstrate its operation via both analytical and micromagnetic modeling. The operation exploits the exchange field due to the antiferromagnetic coupling between soft and hard sublayers of the free layer as well as on the easy-plane anisotropy of the soft sublayer. Optimized AF-ECC STO structures can generate large-amplitude magnetization oscillations, which can be tuned over a broad frequency range with precessions mostly generated by the soft layer. We demonstrate that the AF-ECC STO structure offers flexibility in current control of the oscillation frequency and magnetization angle for realistic material parameters.

42 ENGINEERING↗

Surge and Stall Detection Using Acoustic Analysis FOR GAS Turbine Hybrid Cycles

In this article compressor dynamics were studied in a gas turbine - fuel cell hybrid power system having a larger compressor volume than traditionally found in gas turbine systems. This larger compressor volume adversely affects the surge margin of the gas turbine. Industrial acoustic sensors were placed near the compressor to identify when the equipment was getting close to the surge line. Fast Fourier transform (FFT) mathematical analysis was used to obtain spectra representing the probability density across the frequency range (0 - 5000 Hz). Comparison between FFT spectra for nominal and transient operations revealed that higher amplitude spikes were observed during incipient stall at three different frequencies, 900, 1020, and 1800 Hz. These frequencies were compared to the natural frequencies of the equipment and the frequency for the rotating turbomachinery to identify more general nature of the acoustic signal typical of the onset of compressor surge. The primary goal of this acoustic analysis was to establish an online methodology to monitor compressor stability that can be anticipated and avoided.

42 ENGINEERING↗

Lumped parameter analysis of a stringer reinforced plate excited by band limited noise

The maximum root-mean-square response of a square clamped plate, subjected to a stationary random excitation, was determined both theoretically and empirically. For the tests, a 40 x 40 x 1/4 aluminum sheet was milled out to provide a thin waffle plate with 9 panels. The plate was acoustically excited, with the frequency range limited between 25 Hz and 500 Hz. The root-mean-square power of the random excitations, 149 decibels, was nearly constant for all natural frequencies of the plate system. Strain gage readings at 14 points were plotted as power spectral densities and root-mean-square displacements. A modal damping ratio matrix was determined from the response curves. Damping ratios were found to be a function of frequency, but not of location on the plate. For comparisons with the theoretical response, the plate was subdivided into 14 modes and anlayzed as a damped, lumped parameter system by use of an approximate normal-mode method. This method gave the best predictions of the power spectral densities for the lower frequencies. That prediction errors increased for the higher frequencies is attributed to improper assumptions for mass distribution and the insufficient number of lumped mass points.

Bilyeu, D. J.↗

A search for 5 min periodic structure in solar 2 cm emission

Two hundred and eighty-five hours of solar data obtained from a 2 cm radiometer during 1968-1969 were analyzed for evidence of periodic structure related to the 5 min periodic chromospheric oscillations detected in optical line emissions. A power spectral analysis of the data failed to show any statistically significant periodic activity in the frequency range 1-15 mHz for data organized according to solar activity in H-alpha, soft solar X-rays (2-12 A), and several microwave frequencies (3-15 GHz). A small shift in power from low to higher frequencies in the power spectrum of the 2 cm data was found to be correlated with H-alpha and X-ray activity. This power shift is attributed to a relative increase in chromospheric turbulence at altitudes common to H-alpha, X-ray, and 2 cm emission.

Sentman, D. D.↗

Possible generation mechanisms of low-frequency waves /less than about 50 Hz/ with application to the bow shock plasma

Generation mechanisms of waves observed at the earth's bow shock or in its vicinity within the frequency range extending up to about 50 Hz are reviewed. Observations and theories regarding waves in the solar wind upstream of the bow shock (both low-frequency 0.01-0.05 Hz and high-frequency 0.5-4 Hz waves), waves in the bow shock itself and magnetosheath waves arising from processes of generation or amplification in the bow shock are considered. Hydromagnetic, ion-acoustic and whistler type waves are discussed.

Dangelo, N.↗

Nondestructive evaluation techniques for nickel-cadmium aerospace battery cells

The ac impedance characteristics of Ni-Cd cells as an in-situ, nondestructive means of determining cell lifetime, particularly with respect to the probability of premature failure were evaluated. Emphasis was on evaluating Ni-Cd cell impedance over a wide frequency range (10,000 to 0.0004 Hz) as the cells were subjected to charge/discharge cycle testing. The results indicate that cell degradation is reflected in the low frequency (Warburg) impedance characteristics associated with diffusion processes. The Warburg slope (W) was found to steadily increase as a function of cell aging for completely discharged cells. In addition, based on data for two cells, a high or rapidly increasing value for W signals imminent cell failure by one mechanism. Degradation by another mechanism is apparently reflected in a fall-off (roll-over) of W at lower frequencies. As a secondary result, the frequency dependence of the absolute cell impedance at low frequencies (5 - 500 mHz) was found to be a good indication of the cell state-of-charge.

Haak, R.↗

AMPTE IRM observations of waves associated with flux transfer events in the magnetosphere

The AMPTE IRM wave instrument has been applied to the study of flux transfer events (FTE's). This initial investigation concentrates on FTE's observed in the magnetosphere during the fall of 1984. The wave morphology consists of four significant features: at frequencies below the ion gyrofrequency, magnetic fluctuations occur with amplitudes of the order of 1 nT; at frequencies from a few hertz to a few hundred hertz, electric field fluctuations are observed which have a broadband amplitude of a few millivolts per meter, which are perpendicularly polarized at the lowest frequencies, and which are partly electrostatic and partly electromagnetic; in the frequency range from 100 Hz to 10 kHz, broadband spikelike waves occur with a time-averaged amplitude of about 0.1 mV/m; and near the electron plasma frequency, bursts of waves occur at the boundaries of FTE's. In none of the 25 events surveyed does the total broadband amplitude of all the waves exceed a few millivolts per meter, an amplitude far too small to provide the dissipation required by 'traditional' reconnection models in which the dissipation region has a thickness the order of an ion gyroradius. Thus, either all of the FTE's are observed at some distance from the diffusion region, or the observable waves play no significant role in the diffusion process, or 'traditional' reconnection models do not apply to reconnection in FTE's.

Labelle, J.↗

Wavelet-Based Grid Generation

Wavelets can provide a basis set in which the basis functions are constructed by dilating and translating a fixed function known as the mother wavelet. The mother wavelet can be seen as a high pass filter in the frequency domain. The process of dilating and expanding this high-pass filter can be seen as altering the frequency range that is 'passed' or detected. The process of translation moves this high-pass filter throughout the domain, thereby providing a mechanism to detect the frequencies or scales of information at every location. This is exactly the type of information that is needed for effective grid generation. This paper provides motivation to use wavelets for grid generation in addition to providing the final product: source code for wavelet-based grid generation.

HIGH PASS FILTERS↗

Performance and Stability Analyses of Rocket Thrust Chambers with Oxygen/Methane Propellants

Liquid rocket engines using oxygen and methane propellants are being considered by the National Aeronautics and Space Administration (NASA) for future in-space vehicles. This propellant combination has not been previously used in flight-qualified engine systems developed by NASA, so limited test data and analysis results are available at this stage of early development. As part of activities for the Propulsion and Cryogenic Advanced Development (PCAD) project funded under the Exploration Technology Development Program, the NASA Marshall Space Flight Center (MSFC) has been evaluating capability to model combustion performance and stability for oxygen and methane propellants. This activity has been proceeding for about two years and this paper is a summary of results to date. Hot-fire test results of oxygen/methane propellant rocket engine combustion devices for the modeling investigations have come from several sources, including multi-element injector tests with gaseous methane from the 1980s, single element tests with gaseous methane funded through the Constellation University Institutes Program, and multi-element injector tests with both gaseous and liquid methane conducted at the NASA MSFC funded by PCAD. For the latter, test results of both impinging and coaxial element injectors using liquid oxygen and liquid methane propellants are included. Configurations were modeled with two one-dimensional liquid rocket combustion analysis codes, the Rocket Combustor Interactive Design and Analysis code and the Coaxial Injector Combustion Model. Special effort was focused on how these codes can be used to model combustion and performance with oxygen/methane propellants a priori, and what anchoring or calibrating features need to be applied, improved or developed in the future. Low frequency combustion instability (chug) occurred, with frequencies ranging from 150 to 250 Hz, with several multi-element injectors with liquid/liquid propellants, and was modeled using techniques from Wenzel and Szuch. High-frequency combustion instability also occurred at the first tangential (1T) mode, at about 4500 Hz, with several multi-element injectors with liquid/liquid propellants. Analyses of the transverse mode instability were conducted by evaluating injector resonances and empirical methods developed by Hewitt.

Hulka, James R.↗

Quasi-Periodic Whistler Mode Emission in the Plasmasphere as Observed By the DSX Spacecraft

We describe the quasi-periodic (QP) whistler-mode emissions found in the plasmasphere as detected by electric and magnetic instrumentation onboard the Demonstration and Science Experiments (DSX) spacecraft in medium Earth orbit. Over the course of the nearly 2-year mission, at least 45 episodes of whistler mode QP emissions were detected by the Broad Band Receiver (BBR) onboard DSX. Episodes of QP emissions were identified by discrete events having a clear unambiguous periodic nature as detected by both the electric antennae and search coil magnetic sensor in the BBR survey data at 30 second temporal resolution. Most of the QP episodes occurred in a frequency range between 1- 4 kHz, in a band previously identified by Van Allen Probes and Cluster investigators. However, episodes were also detected by DSX at higher frequencies - events in these episodes extending all the way to 15 kHz. We present our findings on these unusual high frequency events in the presentation herein. Specifically, these high frequency QP episodes tended to be observed near dawn/dusk when the spacecraft was at relatively high magnetic latitudes and on magnetic L-shells between 3-5. Another unusual feature of these episodes is that individual up-drifting events making up the episode were found to sometimes occur concurrently in time: The high frequency portion of one up-drifting ‘polliwog-shaped’ event overlapped in time with the low frequency portion of the subsequent event. This behavior of the QP emissions has not been previously emphasized and we consider how this temporal concurrence relates to the source processes.

Quasi-periodic↗

Structural, spectroscopic and dielectric investigations on Ba{sub 8}Zn(Nb{sub 6-x}Sb{sub x})O{sub 24} microwave ceramics

Ba{sub 8}Zn(Nb{sub 6-x}Sb{sub x})O{sub 24} (x = 0, 0.3, 0.6, 0.9, 1.2, 1.5, 1.8 and 2.4) ceramics were prepared through the conventional solid-state route. The materials were calcined at 1250 {sup o}C and sintered in the range 1400-1425 {sup o}C. The structure of the system was analyzed by X-ray diffraction, Fourier transform infrared and Raman spectroscopic methods. The theoretical and experimental densities were calculated. The microstructure of the sintered pellets was analyzed using scanning electron microscopy. The low frequency dielectric properties were studied in the frequency range 50 Hz-2 MHz. The dielectric constant ({epsilon}{sub r}), temperature coefficient of resonant frequency ({tau}{sub f}) and the unloaded quality factor (Q{sub u}) are measured in the microwave frequency region using cavity resonator method. The {tau}{sub f} values of the samples reduced considerably with the increase in Sb concentration. The materials have intense emission lines in the visible region. The compositions have good microwave dielectric properties and photoluminescence and hence are suitable for dielectric resonator and ceramic laser applications.

36 MATERIALS SCIENCE↗

Millimeter and terahertz wave absorption in a lossy conducting layer

Relativistic electronics research in recent years has produced powerful millimeter waves on the MW level, while also extending the frequency range into the terahertz (THz) region and beyond. These developments have opened up new horizons in applications. The current study is motivated by the associated need for high-power absorbers not readily available at such frequencies. Our focus is on effective absorber schemes which can handle high power while also possessing a structural simplicity for easy implementation. In and above the THz region, the electrical conductivity can no longer be treated as a real constant. We begin with a derivation of the field penetration depth applicable to all frequencies. Requirements to meet the intended criteria are then determined from the wave penetration and reflection properties. Design examples in the 1–1000 GHz range are illustrated, which consist of a thin lossy conducting layer on the surface of a pyramidal shaped metal base. It is shown in theory that such structures can function effectively in the millimeter and THz regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of wideband acoustic detectors of gravitational waves equipped with displacement concentrators

We present the concept design of a new class of acoustic detectors of gravitational waves (GWs), which feature a wideband sensitivity. The main novelty relies in the geometry of the test mass, which is equipped with integrated whips. This tapering provides more resonant modes with favorable cross-section to GWs to achieve a large bandwidth. Moreover, the whips act as displacement concentrators and ensure a high mechanical gain at the sensing surfaces. The resulting decrease in mechanical stiffness allows us to achieve the noise matching condition with reasonable operating parameters of the displacement transducer. The performances of the detector are modeled taking into account the quantum and thermal noise sources in the case of a capacitive transducer with a SQUID amplifier. This class of detectors can be designed to target GWs in the frequency range above 1 kHz at a sensitivity comparable to that predicted for future long baseline interferometric detectors. After showing how to scale the design for different constructing materials and target frequencies, we discuss the predicted sensitivity to specific astrophysical signal waveforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗