Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydrodynamics methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Berberine and zinc oxide-based nanoparticles for the chemo-photothermal therapy of lung adenocarcinoma

Highlights: • Berberine (BER) and zinc oxide (ZnO)-based nanoparticles (NPs) were fabricated. • BER-ZnO NPs were prepared by simple blending method without pharmaceutical excipients. • BER-ZnO NPs exhibited improved chemo-photothermal therapeutic effects in A549 cells. Organic/inorganic hydrid nanoparticles (NPs) composed of berberine (BER) and zinc oxide (ZnO) were developed for the therapy of lung cancers. Without the use of pharmaceutical excipients, NPs were fabricated with only dual anticancer agents (BER and ZnO) by facile blending method. The mean weight ratio between BER and ZnO in BER-ZnO NPs was 39:61 in this study. BER-ZnO NPs dispersed in water exhibited 200–300 nm hydrodynamic size under 5 mg/mL concentration. The exposure of both BER and ZnO in the outer layers of BER-ZnO NPs was identified by X-ray photoelectron spectroscopy analysis. The amorphization of BER and the maintenance of ZnO structure were observed in the results of X-ray powder diffractometer analysis. Improved antiproliferation efficacy, based on the chemo-photothermal therapeutic efficacy, of BER-ZnO NPs in A549 (human lung adenocarcinoma) cells was presented. According to the blood tests in rats after intravenous administration, BER-ZnO NPs did not induce severe hepatotoxicity, renal toxicity, and hemotoxicity. Developed BER-ZnO NPs can be used efficiently and safely for the chemo-photothermal therapy of lung cancers.

60 APPLIED LIFE SCIENCES↗

Stability of the fcc phase in shocked nickel up to 332 GPa

Despite making up 5-20 wt.% of Earth’s predominantly iron core, the melting properties of elemental nickel at core conditions remain poorly understood, due largely to a dearth of experimental data. We present here an in situ X-ray diffraction study performed on laser shock-compressed samples of bulk nickel, reaching pressures up to ~ 500 GPa. Hugoniot states of nickel were targeted using a flat-top laser drive, with in situ X-ray diffraction data collected using the Linac Coherent Light Source. Rietveld methods were used to determine the densities of the shocked states from the measured diffraction data, while peak pressures were determined using a combination of measured particle velocities, shock transit times, hydrodynamic simulations, and laser intensity calibrations. We observed solid compressed face-centered cubic (fcc) Ni up to at least 332 ± 30 GPa along the Hugoniot—significantly higher than expected from the majority of melt lines that have been proposed for nickel. We also bracket the partial melting onset to between 377 ± 38 GPa and 486 ± 35 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cataloging accreted stars within Gaia DR2 using deep learning

The goal of this study is to present the development of a machine learning based approach that utilizes phase space alone to separate the Gaia DR2 stars into two categories: those accreted onto the Milky Way from those that are in situ. Traditional selection methods that have been used to identify accreted stars typically rely on full 3D velocity, metallicity information, or both, which significantly reduces the number of classifiable stars. The approach advocated here is applicable to a much larger portion of Gaia DR2. Methods. A method known as “transfer learning” is shown to be effective through extensive testing on a set of mock Gaia catalogs that are based on the F IRE cosmological zoom-in hydrodynamic simulations of Milky Way-mass galaxies. The machine is first trained on simulated data using only 5D kinematics as inputs and is then further trained on a cross-matched Gaia /RAVE data set, which improves sensitivity to properties of the real Milky Way. Results. The result is a catalog that identifies ~767 000 accreted stars within Gaia DR2. This catalog can yield empirical insights into the merger history of the Milky Way and could be used to infer properties of the dark matter distribution.

Astronomy & Astrophysics↗

Shock state distributions in porous tantalum and characterization with multipoint velocimetry

Heterogenous materials under shock compression can be expected to reach different shock states throughout the material according to local differences in microstructure and the history of wave propagation. Here, in this work, a compact, multiple-beam focusing optic assembly is used with high-speed velocimetry to interrogate the shock response of porous tantalum films prepared through thermal-spray deposition. The distribution of particle velocities across a shocked interface is compared to results obtained using a set of defocused interferometric beams that sampled the shock response over larger areas. The two methods produced velocity distributions along the shock plateau with the same mean, while a larger variance was measured with narrower beams. The finding was replicated using three-dimensional, mesoscopically resolved hydrodynamics simulations of solid tantalum with a pore structure mimicking statistical attributes of the material and accounting for radial divergence of the beams, with agreement across several impact velocities. Accounting for pore morphology in the simulations was found to be necessary for replicating the rise time of the shock plateau. The validated simulations were then used to show that while the average velocity along the shock plateau could be determined accurately with only a few interferometric beams, accurately determining the width of the velocity distribution, which here was approximately Gaussian, required a beam dimension much smaller than the spatial correlation lengthscale of the velocity field, here by a factor of ∼30×, with implications for the study of other porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Warm dark matter signatures on the 21cm power spectrum: intensity mapping forecasts for SKA

We investigate the impact that warm dark matter (WDM) has in terms of 21 cm intensity mapping in the post-reionization Universe at z=3−5. We perform hydrodynamic simulations for 5 different models: cold dark matter and WDM with 1,2,3,4 keV (thermal relic) mass and assign the neutral hydrogen a-posteriori using two different methods that both reproduce observations in terms of column density distribution function of neutral hydrogen systems. Contrary to naive expectations, the suppression of power present in the linear and non-linear matter power spectra, results in an increase of power in terms of neutral hydrogen and 21 cm power spectra. This is due to the fact that there is a lack of small mass halos in WDM models with respect to cold dark matter: in order to distribute a total amount of neutral hydrogen within the two cosmological models, a larger quantity has to be placed in the most massive halos, that are more biased compared to the cold dark matter cosmology. We quantify this effect and address significance for the telescope SKA1-LOW, including a realistic noise modeling. The results indicate that we will be able to rule out a 4 keV WDM model with 5000 hours of observations at z>3, with a statistical significance of >3 σ, while a smaller mass of 3 keV, comparable to present day constraints, can be ruled out at more than 2 σ confidence level with 1000 hours of observations at z>5.

79 ASTRONOMY AND ASTROPHYSICS↗

SOME CONSTRAINTS ON THE LOWER MASS LIMIT FOR DOUBLE-DEGENERATE PROGENITORS OF TYPE Ia SUPERNOVAE

Recent theoretical and observational studies both argue that the merging of double carbon-oxygen white dwarfs (WDs) is responsible for at least some Type Ia supernovae (SNe Ia). Previous (standard) studies of the anticipated SN birthrate from this channel have assumed that the merger process is conservative and that the primary criterion for explosion is that the merged mass exceeds the Chandrasekhar mass. Han and Webbink demonstrated that mass transfer and merger in close double WDs will in many cases be non-conservative. Pakmor et al. further suggested that the merger process should be violent in order to initiate an explosion. We have therefore investigated how the SN Ia birthrate from the double-degenerate (DD) channel is affected by these constraints. Using the binary-star population-synthesis method, we have calculated the DD SN Ia birthrate under conservative and non-conservative approximations, and including lower mass and mass-ratio limits indicated by recent smoothed-particle-hydrodynamic calculations. The predicted DD SN Ia rate is significantly reduced by all of these constraints. With dynamical mass loss alone (violent merger) the birthrate is reduced to 56% of the conservative rate. Requiring the mass ratio q > 2/3 further reduces the birthrate to 18% that of the standard assumption. An upper limit of 0.0061 SNuM, or a Galactic rate of 4.6 Multiplication-Sign 10{sup -4} yr{sup -1}, might be realistic.

79 ASTRONOMY AND ASTROPHYSICS↗

Demonstration of x-ray fluorescence spectroscopy as a sensitive temperature diagnostic for high-energy-density physics experiments

We present the use of x-ray fluorescence spectroscopy (XFS) to a sensitive temperature diagnostic in shocked foams at temperatures of 30–75 eV. Cobalt-doped foams were shock compressed using a planar drive at the OMEGA laser facility and photo-pumped with a Zn He⁢𝛼 x-ray source. Analysis of the resulting cobalt 𝐾⁢𝛽 x-ray fluorescence spectra using collisional radiative codes allows the temperature to be determined in the shocked foams. Furthermore, this method provides a sensitive and robust technique to determine temperatures in high-energy-density physics experiments in the tens of electronvolts temperature range. In these experiments, we find that radiation hydrodynamic simulations predict a lower temperature in the shocked foams compared to analysis of the XFS data using collisional radiative models. Although additional experiments with an independent temperature diagnostic to absolutely calibrate XFS spectra for these conditions will be required to resolve this discrepancy, these results demonstrate the excellent temperature sensitivity of XFS spectra for high-energy-density physics experiments.

Atomic spectra↗

A review of the shear rheology of carbon black suspensions

The microstructural link to the rheology of carbon black suspensions has recently become clear as a result of advances in computational and experimental methods. This understanding reveals the important role of the restructuring, build-up, and break-up of carbon black agglomerates in simple shear, rationalized by a dimensionless balance of the hydrodynamic forces acting to break the agglomerates apart against the cohesive forces holding them together (i.e., the Mason number). The Mason number not only can predict the origin of reversible thixotropy seen in carbon black suspensions observed at higher shear intensities, but can also be used to rationalize the evolution of microstructure at lower shear intensities. This review focuses on carbon black suspension behavior, but the insights derived from carbon black suspensions are broadly applicable to a diverse class of soft matter including colloidal gels relevant to a variety of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Collapse and equilibrium of rotating, adiabatic clouds

A numerical hydrodynamics computer code analysis of the collapse and establishment of equilibrium of adiabatic gas clouds restricted to axial symmetry found that the clouds are originally uniform in density and rotation. The method can compare the dynamic collapse and approach to equilibrium with the data on incompressible uniformly rotating equilibrium clouds and on equilibrium structures of differentially rotating polytropes. It is concluded that the stellar formation theory indicates that the low alpha fragments produced at the termination of the dynamic isothermal collapse phase of interstellar clouds may undergo significant dynamic collapse in an adiabatic regime leading to transitory ring formation and additional fragmentation on a smaller scale.

Boss, A. P.↗

MHD Energy Bypass Scramjet Engine

Revolutionary rather than evolutionary changes in propulsion systems are most likely to decrease cost of space transportation and to provide a global range capability. Hypersonic air-breathing propulsion is a revolutionary propulsion system. The performance of scramjet engines can be improved by the AJAX energy management concept. A magneto-hydro-dynamics (MHD) generator controls the flow and extracts flow energy in the engine inlet and a MHD accelerator downstream of the combustor accelerates the nozzle flow. A progress report toward developing the MHD technology is presented herein. Recent theoretical efforts are reviewed and ongoing experimental efforts are discussed. The latter efforts also include an ongoing collaboration between NASA, the US Air Force Research Laboratory, US industry, and Russian scientific organizations. Two of the critical technologies, the ionization of the air and the MHD accelerator, are briefly discussed. Examples of limiting the combustor entrance Mach number to a low supersonic value with a MHD energy bypass scheme are presented, demonstrating an improvement in scramjet performance. The results for a simplified design of an aerospace plane show that the specific impulse of the MHD-bypass system is better than the non-MHD system and typical rocket over a narrow region of flight speeds and design parameters. Equilibrium ionization and non-equilibrium ionization are discussed. The thermodynamic condition of air at the entrance of the engine inlet determines the method of ionization. The required external power for non-equilibrium ionization is computed. There have been many experiments in which electrical power generation has successfully been achieved by magneto-hydrodynamic (MHD) means. However, relatively few experiments have been made to date for the reverse case of achieving gas acceleration by the MHD means. An experiment in a shock tunnel is described in which MHD acceleration is investigated experimentally. MHD has several potential aerospace applications. The first is to improve the performance of hypersonic air-breathing engines for space launch and cruise vehicles. The second is to improve the performance of a high enthalpy wind tunnel. The third is to control a hypersonic vehicle. With such applications in mind, theoretical and experiments are being conducted at the NASA Ames Research Center to develop the MHD technology.

Mehta, Unmeel B.↗

Coupled nonlinear drift and ion acoustic waves in dense dissipative electron-positron-ion magnetoplasmas

Linear and nonlinear propagation characteristics of drift ion acoustic waves are investigated in an inhomogeneous electron-positron-ion (e-p-i) quantum magnetoplasma with neutrals in the background using the well known quantum hydrodynamic model. In this regard, Korteweg-de Vries-Burgers (KdVB) and Kadomtsev-Petviashvili-Burgers (KPB) equations are obtained. Furthermore, the solutions of KdVB and KPB equations are presented by using the tangent hyperbolic (tanh) method. The variation in the shock profile with the quantum Bohm potential, collision frequency, and the ratio of drift to shock velocity in the comoving frame, v{sub *}/u, is also investigated. It is found that increasing the positron concentration and collision frequency decreases the strength of the shock. It is also shown that when the localized structure propagates with velocity greater than the diamagnetic drift velocity (i.e., u>v{sub *}), the shock strength decreases. However, the shock strength is observed to increase when the localized structure propagates with velocity less than that of drift velocity (i.e., u<v{sub *}). The relevance of the present investigation with regard to dense astrophysical environments is also pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the space-charge boundary layer inside the nozzle of a cutting torch

A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type equations are used. Also an improved expression for the ion-neutral momentum transfer is employed rather than the usual constant ion-mean-free-path or constant ion collision frequency approximations. Assuming a constant electron temperature in the sheath and neglecting the electron inertial term, the continuity and momentum equations for ions and electrons, together with Poisson's equation, were solved for the electric potential, ion velocities (both normal and tangential components), and for the ion and electron densities. It was found that both the ion and electron densities present a sudden drop at the sheath-plasma edge. The ion density continues to decrease slowly inside the sheath, while the electron density presents a virtually zero value everywhere inside the sheath, the electron thermal conduction flux to the nozzle wall being negligible. These wall results thus become thermally isolated in spite of the high electron temperature in its adjacency. For a nozzle biasing voltage close to the gas breakdown, it was found that the electric field value is high, reaching a value of about 9x10{sup 6} V m{sup -1} at the exit of the nozzle wall. This value is higher than the average field value across the sheath and is on the order of the breakdown threshold value. This means that an undesired sheath breakdown could occur at the vicinities of the nozzle exit even if the average electric field across the sheath is not strong enough.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement of thermal photon production in event-by-event hydrodynamics

Thermal photon emission is widely believed to reflect properties of the earliest, hottest evolution stage of the medium created in ultrarelativistic heavy-ion collisions. Previous computations of photon emission have been carried out using a hydrodynamical medium description with smooth, averaged initial conditions. Recently, more sophisticated hydrodynamical models that calculate observables by averaging over many evolutions with event-by-event fluctuating initial conditions (ICs) have been developed. Given their direct connection to the early time dynamics, thermal photon emission appears to be an ideal observable to probe fluctuations in the medium initial state. In this work, we demonstrate that including fluctuations in the ICs may lead to an enhancement of the thermal photon yield of about a factor of 2 in the region 2<p{sub T}<4 GeV/c (where thermal photon production dominates the direct photon yield) compared to a scenario using smooth, averaged ICs. Consequently, a much better agreement with PHENIX data is found. This can be understood in terms of the strong temperature dependence of thermal photon production, translating into a sensitivity to the presence of hotspots in an event and thus establishing thermal photons as a suitable probe to characterize IC fluctuations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elliptic flow at energies available at the CERN Large Hadron Collider: Comparing heavy-ion data to viscous hydrodynamic predictions

I compare the first viscous hydrodynamic prediction for integrated elliptic flow in Pb-Pb collisions at the Large Hadron Collider with the first data released by the ALICE Collaboration. These new data are found to be consistent with hydrodynamic extrapolations of the Relativistic Heavy-Ion Collider data with no change in medium parameters (e.g., average viscosity). I also discuss how, in general, a precise comparison of data to theoretical calculations requires an understanding of some subtleties of the measurement - most notably the cut on transverse momentum of the particles used and the differing sensitivities to flow fluctuations and nonflow effects of the various measurement methods.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Progress and investigation on lattice Boltzmann modeling of multiple immiscible fluids or components with variable density and viscosity ratios

Lattice Boltzmann models for simulating multiphase flows are relatively new, and much work remains to be done to demonstrate their ability to solve fundamental test cases before they are considered for engineering problems. From this perspective, a hydrodynamic lattice Boltzmann model for simulating immiscible multiphase flows with high density and high viscosity ratios, up to O(1000) and O(100) respectively, is presented and validated against analytical solutions. The method is based on a two phase flow model with operators extended to handle N immiscible fluids. The current approach is O(N) in computational complexity for the number of different gradient approximations. This is a major improvement, considering the O(N{sup 2}) complexity found in most works. A sequence of systematic and essential tests have been conducted to establish milestones that need to be met by the proposed approach (as well as by other methods). First, the method is validated qualitatively by demonstrating its ability to address the spinodal decomposition of immiscible fluids. Second, the model is quantitatively verified for the case of multilayered planar interfaces. Third, the multiphase Laplace law is studied for the case of three fluids. Fourth, a quality index is developed for the three-phase Laplace–Young’s law, which concerns the position of the interfaces between the fluids resulting from the different surface tensions. The current model is compatible with the analytical solution, and is shown to be first order accurate in terms of this quality index. Finally, the multilayered Couette’s flow is studied. In this study, numerical results can recover the analytical solutions for all the selected test cases, as long as unit density ratios are considered. For high density and high viscosity ratios, the analytical solution is recovered for all tests, except that of the multilayered Couette’s flow. Numerical results and a discussion are presented for this unsuccessful test case. It is believed that other LB models may have the same problem in addressing the simulation of multiphase flows with variable density ratios.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermosolutal Convection in a Shallow Layer of a Binary Fluid

This paper reports an analytical and numerical study of the combined Soret and thermosolutal effects on natural convection in a shallow rectangular cavity filled with a binary mixture. Neumann boundary conditions for temperature and concentration are applied to the horizontal walls of the enclosure, while the two vertical ones are assumed impermeable and insulated. For convection in an infinite layer, analytical solutions for the stream function, temperature and concentration fields are obtained using a parallel flow approximation in the core region of the cavity and an integral form of the energy and constituent equations. The critical Rayleigh numbers for the onset of supercritical and subcritical convection are predicted explicitly by the present model. Numerical solutions of the full governing equations are obtained for a wide range of the governing parameters. A good agreement is observed between the analytical model and the numerical simulations.

36 MATERIALS SCIENCE↗

Computation of two-dimensional electric field from the ion laser induced fluorescence measurements

This paper presents a method of computing two-dimensional electric field from ion laser induced fluorescence (LIF) measurements in a plasma flow. The expression for the field is derived by taking velocity moments of the Boltzmann equation for ions. It was found that the pressure tensor, related to the width of the ion velocity distribution, plays a critical role in the computation of the electric field. Even with the assumption of cold ion flow, the pressure tensor contribution may be significant when velocity spread is caused by other forces. Such a situation occurs in the flow of a Hall thruster, where velocity spread is caused by the ions born at different potentials. LIF measurements of the cylindrical hall thruster plume were used to demonstrate practical application of the derived method. Whenever the pressure tensor components are small as compared to the mean ion drift velocity, the electric field calculations reduce to a simple expression given in terms of mean ion drift velocity and its divergence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of Cumulative Ecosystem Response to Restoration Projects in the Lower Columbia River and Estuary, 2010

This is the seventh and final annual report of a project (2004–2010) addressing evaluation of the cumulative effects of habitat restoration actions in the 235-km-long lower Columbia River and estuary. The project, called the Cumulative Effects (CE) study, was conducted for the U.S. Army Corps of Engineers Portland District by a collaboration of research agencies led by the Pacific Northwest National Laboratory. We achieved the primary goal of the CE study to develop a methodology to evaluate the cumulative effects of habitat actions in the Columbia Estuary Ecosystem Restoration Program. We delivered 1) standard monitoring protocols and methods to prioritize monitoring activities; 2) the theoretical and empirical basis for a CE methodology using levels-of-evidence; 3) evaluations of cumulative effects using ecological relationships, geo-referenced data, hydrodynamic modeling, and meta-analyses; and 4) an adaptive management process to coordinate and coalesce restoration efforts in the LCRE. A solid foundation has been laid for future comprehensive evaluations of progress made by the Columbia Estuary Ecosystem Restoration Program to understand, conserve, and restore ecosystems in the lower Columbia River and estuary.

54 ENVIRONMENTAL SCIENCES↗