Search NASA⌕ Search

SEARCH · Search NASA

Results for “linked data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Spread spectrum communication link using surface wave devices

A fast lock-up, 8-MHz bandwidth 8,000 bit per second data rate spread spectrum communication link breadboard is described that is implemented using surface wave devices as the primary signal generators and signal processing elements. It uses surface wave tapped delay lines in the transmitter to generate the signals and in the receiver to detect them. The breadboard provides a measured processing gain for Gaussian noise of 31.5 dB which is within one dB of the theoretical optimum. This development demonstrates that spread spectrum receivers implemented with surface wave devices have sensitivities and complexities comparable to those of serial correlation receivers, but synchronization search times which are two to three orders of magnitude smaller.

Hunsinger, B. J.↗
NASA NTRS1980

A propagation effects handbook for satellite systems design. A summary of propagation impairments on 10-100 GHz satellite links, with techniques for system design

This handbook provides satellite system engineers with a concise summary of the major propagation effects experienced on Earth-space paths in the 10 to 100 GHz frequency range. The dominant effect, attenuation due to rain, is dealt with in terms of both experimental data from measurements made in the U.S. and Canada, and the mathematical and conceptual models devised to explain the data. Rain systems, rain and attenuation models, depolarization and experimental data are described. The design techniques recommended for predicting propagation effects in Earth-space communications systems are presented. The questions of where in the system design process the effects of propagation should be considered, and what precautions should be taken when applying the propagation results are addressed in order to bridge the gap between the propagation research data and the classical link budget analysis of Earth-space communications system.

Kaul, R.↗
NASA NTRS1983

MV-3 communication subsystem

The operational mobile VLBI data acquisition system (MV-3) requires that a voice link be established between the mobile data system and a fixed site. A communications subsystem was incorporated in the MV-3 design which consists of HF radio, VHF mobile radio telephone and conventional land line telephone. The HF antenna design was optimized for short and long range transmission using both inverted V and yagi antennas mounted on a self-supporting telescoping mast.

Parks, G. S.↗
NASA NTRS1995

SEDAC information gateway plan V(1)

This annual update of the Information Gateway Plan incorporates changes recommended by the Socioeconomic Data and Applications Center (SEDAC) User Working Group (UWG) and reflects comments and suggestions from users, collaborators, and the Contracting Officer Technical Representative (COTR). The Information Gateway Plan is a concise and specific plan that outlines SEDAC activities and services in support of the earth and social sciences and other user communities. The SEDAC Information Gateway effort is a primary means by which the Earth Observing System Data and Information System (EOSDIS) can link meaningfully with a broad range of social science data sources and users in ways that lead to tangible benefits to the American people. The SEDAC Information Gateway provides interdisciplinary access to socioeconomic and physical science data and information resources held by SEDAC and numerous other institutions and networks around the world. The Plan describes the areas of research of earth scientists and socioeconomic scientists where interchange of data and information is most needed. It sets guidelines for the continued development of SEDAC's directory of social science datasets and establishes priorities for efforts to make data held by SEDAC or accessible through SEDAC available to the user community. The Plan also describes the means by which the SEDAC user community can access information products specified by the SEDAC Data and Applications Development Plan (DADP). Among other major activities, SEDAC will continue to enhance and operate a directory capability, interoperable with the Global Change Master Directory, that provides the socioeconomic community with information about earth science products and the earth science research community with information about socioeconomic data. The Information Gateway also serves as a unique and powerful access pathway for a wide range of users and potential users of socioeconomic and earth science data, including especially remote sensing data.

Chen, Robert S.↗
NASA NTRS1980

Automated frequency standard stability data reduction

A design using a medium sized computer, a fiber optic communication link, and a desk top computer to reduce data collected at a remote site for analysis of frequency standard tests is described. Data generated at the Interim Frequency Standards Test Facility is collected on magnetic tape, which is then transported to a Sigma 5 computer. An Allan variance (two sample variance) is then calculated. The Allan variance (sigma vs tau) is then written to a data file in the Sigma 5. A fiber optic communication link between the Sigma 5 and a desk top computer was designed to transmit data in the Sigma 5 file to the desk top computer. A program was written for the desk top computer that will automatically access the data file in the Sigma 5, process the data and provide a data plot.

Knapp, L. J.↗
NASA NTRS2018

The Planetary Materials Database

NASA provides funds for a variety of research programs whose principal focus is to collect and analyze terrestrial analog materials. These data are used to (1) understand and interpret planetary geology; (2) identify and characterize habitable environments and pre-biotic/biotic processes; (3) interpret returned data from present and past missions; and (4) evaluate future mission and instrument concepts prior to selection for flight. Data management plans are now required for these programs, but the collected data are still not generally available to the community. There is also little possibility to re-analyze the collected materials by other techniques, since there is no requirement to archive collected samples. The Planetary Materials Database (PMD) is a central, high-quality, long-term data repository, which aims to promote the field of astrobiology and increase scientific returns from NASA funded research by enabling data sharing, collaboration and exposure of non-NASA scientists to NASA research initiatives and missions. The PMD is a linked collection of databases developed using the Open Data Repository (ODR) system. The PMD will include detailed descriptions of terrestrial analog planetary materials as well as data from the instruments used in their analysis. The goal is to provide example patterns/spectra/analyses, etc. and background information suitable for use by the Space Science community. An early example showing the utility of these databases (although not in the ODR format) is the RRUFF mineral database. RRUFF, comprising 4,000+ pure mineral standards, is the most popular and widely used dataset of minerals and receives more than 180,000 queries per week from geologists and mineralogists worldwide. The PMD will be patterned after the CheMin database [3], a resource that contains all of the data collected by the MSL CheMin XRD instrument on Mars. Raw and processed CheMin data can be viewed, downloaded, reprocessed and reanalyzed using cloud-based “applications” linked to the data.

Blake, David↗
DOE OSTI2015

Brady Geothermal Field InSAR Raw Data

List of TerraSAR-X/TanDEM-X images acquired between 2015-01-01 and 2015-03-31, and archived at https://winsar.unavco.org. See file "BHS InSAR Data with URLs.csv" for individual links. NOTE: The user must create an account in order to access the data (See "Instructions for Creating an Account" below).

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

WHOLESCALE: Seismic Survey Data from San Emidio Nevada 2021

This dataset includes raw and processed seismic data from the 2021 seismic survey at the San Emidio geothermal field in Nevada. In April and May 2021, 37 tri-axial short period seismographs were deployed in a 1.8km diameter cluster centered on 40.367278 N, 119.409019 W. The first data record started at 2021-04-06T07:09:10Z UTC and the last record ended at 2021-05-11T02:58:52Z UTC. The 37 stations included 29 SmartSolo IGU-16HR 3C all-in-one 5 Hz seismographs and 8 DataCube seismographs with 4.5 Hz HGS HG-6(B coil) tri-axial geophones. The raw format (level 0) data includes 353 GB of 500 sps SmartSolo data in native DLD format, 113 GB of 400 sps DataCube data in native DataCube format, and 3.4 GB of GPS data collected during the RTK GPS survey. The SAC data (level 1) files include 564 GB of hourly SAC files. The experiment was designed to monitor seismic activity before, during, and after the planned three-day plant maintenance shutdown April 19-21, 2021. The pumping stopped at 2021/04/19 12:51:45 UTC and resumed about 2021/04/21 21:00:00 UTC. The dataset is hosted in an AWS data lake, with an associated GDR data set providing the metadata. Links to both of these resources are included below. Additionally, this collection features data and metadata from a 2016 seismic survey at the same site for comparative analysis.

15 GEOTHERMAL ENERGY↗
NASA NTRS1973

A zero-error operational video data compression system

A data compression system has been operating since February 1972, using ATS spin-scan cloud cover data. With the launch of ITOS 3 in October 1972, this data compression system has become the only source of near-realtime very high resolution radiometer image data at the data processing facility. The VHRR image data are compressed and transmitted over a 50 kilobit per second wideband ground link. The goal of the data compression experiment was to send data quantized to six bits at twice the rate possible when no compression is used, while maintaining zero error between the transmitted and reconstructed data. All objectives of the data compression experiment were met, and thus a capability of doubling the data throughput of the system has been achieved.

Kutz, R. L.↗
NASA NTRS1983

VAS operational procedures and results at the Kansas City Satellite Field Services Station

An operational assessment of VAS data by using a Man-computer Interactive Data Access System (McIDAS) terminal linked by a 9600 band telephone line is discussed. Seven hours of VAS data were processed and edited daily. Data was scheduled 16 hours a day, 7 days a week; however, during this time period there were very few days with 16 hours of data to evalute. The McIDAS terminal, which has 10 display frames and 5 graphics, provide access to the sounding data processed. These data are processed using two procedures. The dwell sounding data are generated by using all 12 spectral channels with a spin budget of 39. To provide coverage for most of the United States, soundings are made starting at 18 minutes after the hour from approximately 49 deg N to 36 deg N and at 48 minutes after the hour from 36 deg N to 26 deg N. The dwell imaging mode uses 11 channels but the spin budge is 17. With the reduced spin budget, retrievals can be made at 18 or 48 minutes after the hour for approximately 44 deg N to 27 deg N. With these constraints a schedule, of data sets was proposed to use the schedule and how the data set could be used are shown.

Heckman, B.↗
NASA NTRS2000

Shipping Monitor

Through a SBIR contract between Kennedy Space Center and Silicon Designs, came the tri-axial data acquisition system, known commercially as the G-Logger. It is a portable, self-contained device that stores and analyzes shock, vibration, and temperature data during payload transport. It is sealed for protection from the weather and can be left unattended for up to three weeks as it collects data. It can easily be linked with any desktop or laptop computer in order to download the collected data. It serves uses in the automotive, shipping, aerospace, and machining industries.

Source record↗
NASA NTRS2001

New Data on the Topside Electron Density Distribution

The existing uncertainties about the electron density profiles in the topside ionosphere, i.e., in the height region from hmF2 to approx. 2000 km, require the search for new data sources. The ISIS and Alouette topside sounder satellites from the sixties to the eighties recorded millions of ionograms and most were not analyzed in terms of electron density profiles. In recent years an effort started to digitize the analog recordings to prepare the ionograms for computerized analysis. As of November 2001 about 350,000 ionograms have been digitized from the original 7-track analog tapes. These data are available in binary and CDF format from the anonymous ftp site of the National Space Science Data Center. A search site and browse capabilities on CDAWeb assist the scientific usage of these data. All information and access links can be found at http://nssdc.gsfc.nasa.gov/space/isis/isis-status.html. This paper describes the ISIS data restoration effort and shows how the digital ionograms are automatically processed into electron density profiles from satellite orbit altitude (1400 km for ISIS-2) down to the F peak. Because of the large volume of data an automated processing algorithm is imperative. The automatic topside ionogram scaler with true height algorithm TOPIST software developed for this task is successfully scaling approx.70 % of the ionograms. An 'editing process' is available to manually scale the more difficult ionograms. The automated processing of the digitized ISIS ionograms is now underway, producing a much-needed database of topside electron density profiles for ionospheric modeling covering more than one solar cycle. The ISIS data restoration efforts are supported through NASA's Applied Systems and Information Research Program.

Huang, Xue-Qin↗
DOE OSTI2011

Scenario driven data modelling: a method for integrating diverse sources of data and data streams

Background: Biology is rapidly becoming a data intensive, data-driven science. It is essential that data is represented and connected in ways that best represent its full conceptual content and allows both automated integration and data driven decision-making. Recent advancements in distributed multi-relational directed graphs, implemented in the form of the Semantic Web make it possible to deal with complicated heterogeneous data in new and interesting ways. Results: This paper presents a new approach, scenario driven data modelling (SDDM), that integrates multirelational directed graphs with data streams. SDDM can be applied to virtually any data integration challenge with widely divergent types of data and data streams. In this work, we explored integrating genetics data with reports from traditional media. SDDM was applied to the New Delhi metallo-beta-lactamase gene (NDM-1), an emerging global health threat. The SDDM process constructed a scenario, created a RDF multi-relational directed graph that linked diverse types of data to the Semantic Web, implemented RDF conversion tools (RDFizers) to bring content into the Sematic Web, identified data streams and analytical routines to analyse those streams, and identified user requirements and graph traversals to meet end-user requirements. Conclusions: We provided an example where SDDM was applied to a complex data integration challenge. The process created a model of the emerging NDM-1 health threat, identified and filled gaps in that model, and constructed reliable software that monitored data streams based on the scenario derived multi-relational directed graph. The SDDM process significantly reduced the software requirements phase by letting the scenario and resulting multi-relational directed graph define what is possible and then set the scope of the user requirements. Approaches like SDDM will be critical to the future of data intensive, data-driven science because they automate the process of converting massive data streams into usable knowledge.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1989

Data system interprobability

Software was developed and tested which allows an end-user to build a book data object in an interactive fashion. The electronic book model was developed for the Library front-end of the DAVID (Distributed Access View Integrated Database) system. It is a complex data object which is capable of holding data of different types and formats. After the task, the plan was to assess the Book model and investigate the possibility of it serving as a knowledge base for a expert system front-end to the DAVID system. For the rest of the fellowship period, data system interoperability was examined. Specifically, a plan was prepared titled Implementations of the Land Analysis System (LAS) to Meet UNEP/GRID Requirements. This plan is aimed at reaching the goal of building one virtual global change information system which will link existing and future data systems allowing earth and space scientists to learn about, locate, access, and correlate data of interest regardless of its physical location. The plan proposed the construction of a master directory (MD) for the European data systems that is equivalent in structure to NASA's MD. The MD is to contain brief, high-level information about existing Earth and space science data sets sufficient for a user to know where data of interest reside and how to go about getting additional information. The plan also outlined the tasks that would be involved to electronically connect the MD system to the various discipline data systems (e.g., LAS) in order to achieve general interroperabilty, that is, the abilty to perform cross-systems searches and exchange of and access to distributed information.

Wakim, Nagi T.↗
NASA NTRS2012

Use of CCSDS Packets Over SpaceWire to Control Hardware

For the Lunar Reconnaissance Orbiter, the Command and Data Handling subsystem consisted of several electronic hardware assemblies that were connected with SpaceWire serial links. Electronic hardware would be commanded/controlled and telemetry data was obtained using the SpaceWire links. Prior art focused on parallel data buses and other types of serial buses, which were not compatible with the SpaceWire and the core flight executive (CFE) software bus. This innovation applies to anything that utilizes both SpaceWire networks and the CFE software. The CCSDS (Consultative Committee for Space Data Systems) packet contains predetermined values in its payload fields that electronic hardware attached at the terminus of the SpaceWire node would decode, interpret, and execute. The hardware s interpretation of the packet data would enable the hardware to change its state/configuration (command) or generate status (telemetry). The primary purpose is to provide an interface that is compatible with the hardware and the CFE software bus. By specifying the format of the CCSDS packet, it is possible to specify how the resulting hardware is to be built (in terms of digital logic) that results in a hardware design that can be controlled by the CFE software bus in the final application

Haddad, Omar↗
DOE OSTI2025

National Cancer Institute (NCI) Exposomic Linkage Protocol

The purpose of this work is to create point-level linkages of residential history data, which is provided by the Surveillance, Epidemiology, and End Results (SEER) program, to air pollution exposure data so that we can develop longitudinal measures of exposure and investigate their effects on cancer incidence, treatment response, and survival. The Louisiana, New Jersey, Kentucky, and Iowa registries were previously linked to LexisNexis residential history data through the National Cancer Institute (NCI). We will enhance the utility of the existing residential location data by geocoding addresses based on data from between 1995 and 2024 and spatially linking the locations to air pollution, indoor radon, and the US Environmental Protection Agency’s (EPA) Risk-Screening Environmental Indicators (RSEI) exposure data (Figure 1).

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗