Search NASA⌕ Search

SEARCH · Search NASA

Results for “mapping variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

A Highly Accurate Technique for the Treatment of Flow Equations at the Polar Axis in Cylindrical Coordinates using Series Expansions

Numerical methods for solving the flow equations in cylindrical or spherical coordinates should be able to capture the behavior of the exact solution near the regions where the particular form of the governing equations is singular. In this work we focus on the treatment of these numerical singularities for finite-differences methods by reinterpreting the regularity conditions developed in the context of pseudo-spectral methods. A generally applicable numerical method for treating the singularities present at the polar axis, when nonaxisymmetric flows are solved in cylindrical, coordinates using highly accurate finite differences schemes (e.g., Pade schemes) on non-staggered grids, is presented. Governing equations for the flow at the polar axis are derived using series expansions near r=0. The only information needed to calculate the coefficients in these equations are the values of the flow variables and their radial derivatives at the previous iteration (or time) level. These derivatives, which are multi-valued at the polar axis, are calculated without dropping the accuracy of the numerical method using a mapping of the flow domain from (0,R)*(0,2pi) to (-R,R)*(0,pi), where R is the radius of the computational domain. This allows the radial derivatives to be evaluated using high-order differencing schemes (e.g., compact schemes) at points located on the polar axis. The proposed technique is illustrated by results from simulations of laminar-forced jets and turbulent compressible jets using large eddy simulation (LES) methods. In term of the general robustness of the numerical method and smoothness of the solution close to the polar axis, the present results compare very favorably to similar calculations in which the equations are solved in Cartesian coordinates at the polar axis, or in which the singularity is removed by employing a staggered mesh in the radial direction without a mesh point at r=0, following the method proposed recently by Mohseni and Colonius (1). Extension of the method described here for incompressible flows or for any other set of equations that are solved on a non-staggered mesh in cylindrical or spherical coordinates with finite-differences schemes of various level of accuracy is immediate.

Constantinescu, George S.↗

Discoveries about Tropical Tropospheric Ozone from Satellite and SHADOZ (Southern Hemisphere Additional Ozonesondes) and a Future Perspective on NASA's Ozone Sensors

We have been producing near-real tropical tropospheric ozone ('TTO') data from TOMS since 1997 with Prof. Hudson and students at the University of Maryland. Maps for 1996-2000 for the operational Earth-Probe instrument reside at: . We also have archived 'TTO' data from the Nimbus 7/TOMS satellite (1979-1992). The tropics is a region strongly influenced by natural variability and anthropogenic activity and the satellite data have been used to track biomass burning pollution and to detect interannual variability and climate signals in ozone. We look forward to future ozone sensors from NASA; four will be launched in 2004 as part of the EOS AURA Mission. The satellite view of chemical-dynamical interactions in tropospheric ozone is not adequate to capture vertical variability. Thus, in 1998, NASA's Goddard Space Flight Center, NOAA's Climate Monitoring and Diagnostics Laboratory (CMDL) and a team of international sponsors established the SHADOZ (Southern Hemisphere ADditional OZonesondes) project to address the gap in tropical ozone soundings. SHADOZ augments launches at selected sites and provides a public archive of ozonesonde data from twelve tropical and subtropical stations at http://croc.nsfc.nasa.gov/shadoz. The stations are: Ascension Island; Nairobi, Kenya; Irene, South Africa; R,union Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil, Malindi, Kenya; Paramaribo, Surinam. From the first 3-4 years of data (presently greater than 1700 sondes), the following features emerge: (a) highly variable tropospheric ozone; (b) a zonal wave-one pattern in tropospheric column ozone; (c) tropospheric ozone variability over the Indian and Pacific Ocean displays strong convective signatures.

Thompson, Anne↗

Discoveries about Tropospheric Ozone Pollution from Satellite and Soundings

We have been producing near-red time tropospheric ozone satellite maps from the TOMS (Total Ozone Mapping Spectrometer) sensor since 1997. Maps for 1996-2000 for the operational Earth-Probe instrument are at: . Pollution in the tropics is influenced by biomass burning and by transport patterns that favor recirculation and in other cases reflect climate variability like the El-Nino-Southern Oscillation [Thompson et al., 2001]. The satellite view of chemical-dynamical interactions in tropospheric ozone is not adequate to capture vertical gradients in pollution. Thus, in 1998, NASA's Goddard Space Flight Center and a team of international sponsors established the SHADOZ (Southern Hemisphere ADditional OZonesondes) project to address the gap in tropical ozone soundings. SHADOZ augments launches and provides a public archive of ozonesonde data from twelve tropical stations at http://croc.gsfc.nasa.gov/shadoz. Further insights into the role of chemical and dynamical influences have emerged from the first 4-5 years of SHADOZ data (more than 2000 ozone profiles). Highly variable tropospheric ozone and a zonal wave-one pattern in tropospheric ozone suggest that dynamics is as important as pollution in determining tropical ozone distributions.

Thompson, Anne M.↗

Investigation of Condensing Ice Heat Exchangers for MTSA Technology Development

Metabolic heat regenerated Temperature Swing Adsorption (MTSA) technology is being developed for thermal, carbon dioxide (CO2) and humidity control for a Portable Life Support Subsystem (PLSS). Metabolically-produced CO2 present in the ventilation gas of a PLSS is collected using a CO2selective adsorbent via temperature swing adsorption. The temperature swing is initiated through cooling to well below metabolic temperatures. Cooling is achieved with a sublimation heat exchanger using water or liquid carbon dioxide (LCO2) expanded below sublimation temperature when exposed to low pressure or vacuum. Subsequent super heated vapor, as well as additional coolant, is used to further cool the astronaut. The temperature swing on the adsorbent is then completed by warming the adsorbent with a separate condensing ice heat exchanger (CIHX) using metabolic heat from moist ventilation gas. The condensed humidity in the ventilation gas is recycled at the habitat. The water condensation from the ventilation gas is a significant heat transfer mechanism for the warming of the adsorbent bed because it represents as much as half of the energy potential in the moist ventilation gas. Designing a heat exchanger to efficiently transfer this energy to the adsorbent bed and allow the collection of the water is a challenge since the CIHX will operate in a temperature range from 210K to 280K. The ventilation gas moisture will first freeze and then thaw, sometimes existing in three phases simultaneously. A NASA Small Business Innovative Research (SBIR) Phase 1 contract was performed to investigate condensing and icing as applied to MTSA to enable higher fidelity modeling and assess the impact of geometry variables on CIHX performance for future CIHX design optimization. Specifically, a design tool was created using analytical relations to explore the complex, interdependent design space of a condensing ice heat exchanger. Numerous variables were identified as having nontrivial contributions to performance such as hydraulic diameter, heat exchanger effectiveness, ventilation gas mass flow rate and surface roughness. Using this tool, four test articles were designed and manufactured to map to a full MTSA subassembly (the adsorbent bed, the sublimation heat exchanger for cooling and the condensing ice heat exchanger for warming). The design mapping considered impacts due to CIHX geometry as well as subassembly impacts such as thermal mass and thermal resistance through the adsorbent bed. The test articles were tested at simulated PLSS ventilation loop temperature, moisture content and subambient pressure. Ice accumulation and melting were observed. Data and test observations were analyzed to identify drivers of the condensing ice heat exchanger performance. This paper will discuss the analytical models, the test article designs, and testing procedures. Testing issues will be discussed to better describe data and share lessons learned. Data analysis and subsequent conclusions will be presented.

Padilla, Sebastian↗

Climate-Related Trends, Human Induced Trends, and False-Trends in Seven Years of Terrestrial Water Storage Observations from GRACE

GRACE is unique among remote sensing systems in its ability to "see" below the first few centimeters of the land surface, and it has provided the first global observations of total terrestrial water storage variations. Now that we have more than seven years of GRACE measurements, it is tempting to look for trends in the data. Auxiliary information is almost always required in order to arrive at the correct diagnosis of an apparent trend. Here we will present a map of GRACE derived terrestrial water storage tendencies since 2002 and attempt to explain which are likely to continue due to climatic or human pressures, and which are short-term expressions of natural interannual variability.

Rodell, Matt↗

Using GIS for Processing, Analysis and Visualization of Hydrological Model Data - 16202

The Applied Research Center at Florida International University (ARC-FIU) is supporting the soil and groundwater remediation efforts of the U.S. Department of Energy's (DOE's) Savannah River Site (SRS) by developing a surface water model to simulate the hydrology and the fate and transport of contaminants and sediment in the Tims Branch watershed. Advances in ArcGIS software through the development of spatial GIS database (geo-database) technology, coupled with the development of data models such as ArcHydro which possesses a spatial relational database management system (RDMS) schema and relationship structure specific to hydrologic systems, provides modelers with tools and applications to assist in the processing, analysis and visualization of flow and contaminant transport data. In addition, the coupling of this type of geo-database structure with a numerical modeling package such as MIKE SHE/MIKE 11 can serve as an efficient tool that significantly reduces the time needed for data preparation. The MIKE modeling system has a geographic information systems (GIS) user interface built into its system that can directly use GIS data for model inputs. GIS-based hydrologic models can provide a spatial element that other hydrologic models lack. GIS is important for processing and analysis of large spatio-temporal datasets derived from multiple sources that are being used for setting up of models, model calibration and simulation of flow and contaminant fate and transport. GIS-based approaches in hydrological modeling can also provide the benefit of combining different layers of geographic data to create new integrated information which can be quite useful for creating dependent or independent hydrological variables. ARC-FIU has developed an ArcGIS geo-database to support the hydrological modeling work being conducted at SRS. The SRS geo-database was developed based on the ArcHydro and ArcGIS Base Map data models with modifications made for project specific input parameters. The significance of this approach was to ensure its replicability for potential application at other DOE sites. The SRS geo-database assists in the storage and management of GIS and time series data being used for hydrological model development at Savannah River Site. Other GIS tools such as ArcGIS Model Builder coupled with Python scripting have enabled the automation of many of the repetitive geo-processing tasks required for pre- and post-processing of the hydrological modeling data. Automation of many of the data processing tasks has facilitated faster and hence more complex analyses of field test data. The toolbox created is also a scalable and reusable application that can be implemented in other watersheds. This paper describes the use of ArcGIS tools for the pre-processing, spatial delineation and analysis of hydrological model data; for automation of repetitive geo-processing tasks; and for visualization of different hydrological components of the Tims Branch watershed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Measurement Variability of Vertical Scanning Interferometry Tool Used for Orbiter Window Defect Assessment

The ability to sufficiently measure orbiter window defects to allow for window recertification has been an ongoing challenge for the orbiter vehicle program. The recent Columbia accident has forced even tighter constraints on the criteria that must be met in order to recertify windows for flight. As a result, new techniques are being investigated to improve the reliability, accuracy and resolution of the defect detection process. The methodology devised in this work, which is based on the utilization of a vertical scanning interferometric (VSI) tool, shows great promise for meeting the ever increasing requirements for defect detection. This methodology has the potential of a 10-100 fold greater resolution of the true defect depth than can be obtained from the currently employed micrometer based methodology. An added benefit is that it also produces a digital elevation map of the defect, thereby providing information about the defect morphology which can be utilized to ascertain the type of debris that induced the damage. However, in order to successfully implement such a tool, a greater understanding of the resolution capability and measurement repeatability must be obtained. This work focused on assessing the variability of the VSI-based measurement methodology and revealed that the VSI measurement tool was more repeatable and more precise than the current micrometer based approach, even in situations where operator variation could affect the measurement. The analysis also showed that the VSI technique was relatively insensitive to the hardware and software settings employed, making the technique extremely robust and desirable

Padula, Santo, II↗

A priori analysis on deep learning of subgrid-scale parameterizations for Kraichnan turbulence

In the present study, we investigate different data-driven parameterizations for large eddy simulation of two-dimensional turbulence in the a priori settings. These models utilize resolved flow field variables on the coarser grid to estimate the subgrid-scale stresses. We use data-driven closure models based on localized learning that employs a multilayer feedforward artificial neural network with point-to-point mapping and neighboring stencil data mapping, and convolutional neural network fed by data snapshots of the whole domain. The performance of these data-driven closure models is measured through a probability density function and is compared with the dynamic Smagorinksy model (DSM). The quantitative performance is evaluated using the cross-correlation coefficient between the true and predicted stresses. We analyze different frameworks in terms of the amount of training data, selection of input and output features, their characteristics in modeling with accuracy, and training and deployment computational time. We also demonstrate computational gain that can be achieved using the intelligent eddy viscosity model that learns eddy viscosity computed by the DSM instead of subgrid-scale stresses. Here, we detail the hyperparameters optimization of these models using the grid search algorithm.

42 ENGINEERING↗

NUMERICAL DISSIPATION IN RSPH SIMULATIONS OF ASTROPHYSICAL FLOWS WITH APPLICATION TO PROTOPLANETARY DISKS

Smoothed Particle Hydrodynamics (SPH) is widely used for astrophysical applications, in particular problems of self-gravitational hydrodynamics. However, critics have argued that inherent accuracy problems with the method can be identified, in particular when it comes to describing shocks and dynamical instabilities. Regularized Smoothed Particle Hydrodynamics (RSPH) has previously been proposed as an extension to SPH. It is an attempt to increase the accuracy of the hydrodynamical description without having to abandon the Lagrangian formulation altogether. As the name implies, the method relies on a regularization technique where the solution at temporal intervals is mapped on to a new set of regularly placed particles. This technique allows us to reduce the numerical noise otherwise caused by highly irregular particle distributions and to take advantage of a more flexible approach to variable resolution. The cost of introducing the regularization scheme lies in increased methodical complexity, and in increased numerical dissipation. This paper investigates the numerical dissipation both qualitatively and quantitatively in the context of two-dimensional models relevant to the study of protoplanetary disks. Basic hydrodynamical tests highlight key properties of the RSPH approach. By comparison with an analytical solution, we are also able to quantify the dependence of the spurious viscosity on key numerical parameters. To put the theoretical discussion in perspective, we also present results from simulations of test problems involving disk-planet interactions. The results are compared to published results obtained with other codes.

79 ASTRONOMY AND ASTROPHYSICS↗

Accelerating DNA analysis applications on GPU clusters

DNA analysis is an emerging application of high performance bioinformatic. Modern sequencing machinery are able to provide, in few hours, large input streams of data which needs to be matched against exponentially growing databases known fragments. The ability to recognize these patterns effectively and fastly may allow extending the scale and the reach of the investigations performed by biology scientists. Aho-Corasick is an exact, multiple pattern matching algorithm often at the base of this application. High performance systems are a promising platform to accelerate this algorithm, which is computationally intensive but also inherently parallel. Nowadays, high performance systems also include heterogeneous processing elements, such as Graphic Processing Units (GPUs), to further accelerate parallel algorithms. Unfortunately, the Aho-Corasick algorithm exhibits large performance variabilities, depending on the size of the input streams, on the number of patterns to search and on the number of matches, and poses significant challenges on current high performance software and hardware implementations. An adequate mapping of the algorithm on the target architecture, coping with the limit of the underlining hardware, is required to reach the desired high throughputs. Load balancing also plays a crucial role when considering the limited bandwidth among the nodes of these systems. In this paper we present an efficient implementation of the Aho-Corasick algorithm for high performance clusters accelerated with GPUs. We discuss how we partitioned and adapted the algorithm to fit the Tesla C1060 GPU and then present a MPI based implementation for a heterogeneous high performance cluster. We compare this implementation to MPI and MPI with pthreads based implementations for a homogeneous cluster of x86 processors, discussing the stability vs. the performance and the scaling of the solutions, taking into consideration aspects such as the bandwidth among the different nodes.

59 BASIC BIOLOGICAL SCIENCES↗

Temporal Study 2022-2024: Sensor-Based Time Series of Surface Water Temperature, Specific Conductance, Total Dissolved Solids, Turbidity, Chlorophyll A, and Dissolved Oxygen from across Multiple Watersheds in the Yakima River Basin in Washington, USA

This dataset supports a broader study examining the drivers of temporal variability in sediment respiration rates in the Yakima River Basin. The dataset provides periodic (bi-weekly or monthly) in situ hydrological and water chemistry sensor data, handheld sensor water chemistry data, general environmental context photos, and field metadata collected at six sites across the Yakima River Basin in Washington, USA. Sample and sensor data from previous years (2021-2022) can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1898912 and https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1892054, respectively. Related sample data from 2022-2024 are available at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/2562910. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions This dataset contains a folder of environmental context photographs and videos and (1) file-level metadata; (2) data dictionary; (3) readme; (4) field metadata; (5) field protocols; (6) international generic sample number (IGSN) mapping file; (7) handheld sensor data; and (8) two sensor subfolders. Each sensor subfolder (BarotrollAtm and MantaRiverData) contains a subfolder containing sensor time series data and plots. The BarotrollAtm Data subfolder contains In Situ Rugged BaroTROLL sensor pressure and air temperature data. The MantaRiverData subfolder contains Eureka Manta+ 35B multisonde temperature, specific conductance, and chlorophyll A. All files are .csv, .pdf, .jpg, .jpeg, .mp4, .png, or .mov.

54 ENVIRONMENTAL SCIENCES↗

Revisiting the Pipe Bomb V&V Problem using the BCJ Material Model

For weapon safety assessments, Sandia has an interest in accurately predicting failure of pressure vessels at high temperature. In order to assess Sandia's predictive capability for these problems, a simplified validation problem for thermo-mechanical failure due to pressurization was developed and is referred to as the pipe bomb problem. In this study, several pipes were heated in a non-isothermal manner and pressurized until failure. The previous attempt to accurately predict the pipe bombs' failure pressures demonstrated a notable unconservative prediction. Due to this large bias in the simulation failure pressures toward higher pressures, we assumed that a mechanism driving failure or another aspect of the tests was missed in the original models. The goal of this work was to investigate potential sources of this bias focusing on geometric uncertainty and material model assumptions. As with the previous work, our simulations of the pipe bomb experiments using the BCJ material model over predicted the failure pressures. While success cannot be claimed for the simulated failure pressures, we believe we accurately identified the remaining sources of error in the simulations. Specifically, the temperature mapping algorithm and the geometry are believed to be the primary contributors to the errors. As a result, future work should focus on improving the temperature mapping algorithm and consider using temperature fields determined by a calibrated thermal model that includes convection. Additionally, CT scans of remaining portions of the pipe bomb material inner diameter should be taken to further understand the variability this unmachined surface introduced to the pipe bomb specimens.

42 ENGINEERING↗

Typhoon June /1975/ viewed by a scanning microwave spectrometer

Data were collected by the scanning microwave spectrometer onboard Nimbus 6 during the June 1975 typhoon in the Philippine Sea. The spectrometer was equipped with channels centered on 22.23 GHz (a water vapor band), 31.65 GHz (a transmittance window), and 52.85, 53.85, and 55.45 GHz (an oxygen band). Temperature maps, derived from oxygen band measurements, showed that the typhoon eye had a single peak varying in amplitude with time. Water line and window measurements were used to develop a coordinate system having mutually orthogonal atmospheric variables of column water-vapor content and cloud liquid-water content. Vapor measurements showed a maximum around the intensifying typhoon with a more developed structure during typhoon development. Values were extrapolated for surface wind speed and cloud liquid water vapor content by assuming the troposphere to be saturated with respect to the water vapor in the typhoon. Comparisons with infrared cloud imagery and aircraft flight data show different time variations, attributed to poor typhoon-eye resolution in the microwave images.

Rosenkranz, P. W.↗

Radio and optical observations of the R Aquarii jet

VLA observations at 6 cm and Lick Observatory optical plates of R Aquarii indicate the existence of a jetlike feature extending 7 to 10 arcsec from the central star. A wide field map at 6 cm shows an unresolved compact radio source which lies close to the axis defined by the jet at a distance of about three arcmin from R Aqr. Episodic mass transfer in this symbiotic variable could explain the erratic outbursts that R Aqr is known to undergo. Formation of an accretion disk and the accompanying radio-optical jet may characterize the observed outbursts in this system.

Sopka, R. J.↗

Geostatistical Approaches for Spatial Estimation of Vegetation Quantities Using Ground and Image Data

A major challenge in the study of the earth system is the mapping of vegetation quantities over large regions. Geostatistical methods, such as cokriging and stochastic simulation, have the potential to exploit more fully both remotely sensed data and ground information and improve the spatial estimation of vegetation variables over traditional regression methods. A synthetic example constructed from imaging spectrometer data allows a useful comparison among regression, cokriging and a simple probability-field method. A range of linear relationships between direct (sampled) and ancillary images is used. The lowest root-mean-square-error is achieved with cokriging until the correlation between direct and ancillary data exceeds .89, at which point regression is the superior estimator. Probability-field simulation gives a range of possible realizations, most more precise than those from regression. The relationship between ground measurements and image data is thus demonstrated to be one of the critical factors in the choice of a spatial estimation method.

Dungan, Jennifer L.↗

Environmental Snapshots for Satellite Multi-Angle Aerosol Retrieval Validation During the ACE-Asia Field Campaign

On five occasions spanning the ACE-Asia field experiment in spring 2001, the multi-angle imaging MISR instrument, flying aboard the NASA Earth Observing System s Terra satellite, took quarter-kilometer data over a 400-km-wide swath, coincident with high-quality observations by multiple instruments on two or more participating surface and airborne platforms. The cases capture a range of clean, polluted, and dusty aerosol conditions. They represent some of the best opportunities during ACE- Asia for comparative studies among intensive and extensive aerosol observations in their environmental context. We inter-compare related measurements and discuss the implications of apparent discrepancies for each case, at a level of detail appropriate to the analysis of satellite observations. With a three-stage optical modeling process, we synthesize data from multiple sources into layer-by-layer snapshots that summarize what we know about the state of the atmosphere and surface at key locations during each event, to be used for satellite vicarious calibration and aerosol retrieval validation. Aerosols within a few kilometers of the surface were composed primarily of pollution and Asian dust mixtures, as expected. Accumulation and coarse-mode particle size distributions varied little among the events studied, but column aerosol optical depth changed by more than a factor of four, and the near-surface proportion of dust ranged from about 25% to 50%. The amount of absorbing material in the sub-micron fraction was highest when near-surface winds crossed Beijing and the Korean Peninsula, and was considerably lower for all other cases. Ambiguities remain in segregating size distributions by composition; having simultaneous single scattering albedo measurements at more than a single wavelength would significantly reduce the resulting optical model uncertainties, as would integral constraints from surface and atmospheric radiative flux observations. The consistency of component particle micro-physical properties among the five events, even in this relatively complex aerosol environment, suggests that global, satellite-derived maps of aerosol-air-mass-type extent, combined with targeted in situ measurements, can provide a detailed global picture of aerosol behavior. Further joint satellite and in situ analysis is needed to assess the spatial variability of both intensive and extensive aerosol properties within aerosol air masses in two spatial dimensions.

Kahn, Ralph↗

The Geostationary Fourier Transform Spectrometer

The Geostationary Fourier Transform Spectrometer (GeoFTS) is an imaging spectrometer designed for a geostationary orbit (GEO) earth science mission to measure key atmospheric trace gases and process tracers related to climate change and human activity. GEO allows GeoFTS to continuously stare at a region of the earth for frequent sampling to capture the variability of biogenic fluxes and anthropogenic emissions from city to continental spatial scales and temporal scales from diurnal, synoptic, seasonal to interannual. The measurement strategy provides a process based understanding of the carbon cycle from contiguous maps of carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), and chlorophyll fluorescence (CF) collected many times per day at high spatial resolution (~2.7kmx2.7km at nadir). The CO2/CH4/CO/CF measurement suite in the near infrared spectral region provides the information needed to disentangle natural and anthropogenic contributions to atmospheric carbon concentrations and to minimize uncertainties in the flow of carbon between the atmosphere and surface. The half meter cube size GeoFTS instrument is based on a Michelson interferometer design that uses all high TRL components in a modular configuration to reduce complexity and cost. It is self-contained and as independent of the spacecraft as possible with simple spacecraft interfaces, making it ideal to be a "hosted" payload on a commercial communications satellite mission. The hosted payload approach for measuring the major carbon-containing gases in the atmosphere from the geostationary vantage point will affordably advance the scientific understating of carbon cycle processes and climate change.

atmospheric trace gases↗

Colorado Front Range Disasters: Understanding the Impact of Forest Management on the Cameron Peak and CalWood Fire

Along the Colorado Front Range, forest management has gained significant attention due to uncharacteristically large fires that burned late in 2020. The Cameron Peak Fire (largest in Colorado recorded history) and the CalWood Fire collectively burned an estimated 219,019 acres from August through December of 2020. Project partners at the Coalition for the Poudre River Watershed, Colorado State Forest Service, Ben Delatour Scout Ranch, The Nature Conservancy, Colorado Forest Restoration Institute, and Colorado State University were interested in understanding the effectiveness of previous forest treatments in reducing burn severity within the Cameron Peak Fire and the CalWood Fire. We first collated a forest treatment dataset from pre-existing datasets by reclassifying over 29,000 treatments, which occurred across the Northern Colorado Front Range between 1970-2020. Secondly, we mapped three burn severity indices using Landsat 8 OLI and Sentinel-2 MSI Earth observations and compared them to soil burn severity field data. Thirdly, a total of 35 topographic, disturbance, forest structure, and treatment predictor variables were generated across the fires. Finally, we assessed relationships between these predictor variables and burn severity using the random forest algorithm. Model results indicate that the primary drivers of burn severity were elevation and distance to treatment edge for the Cameron Peak Fire and fire area and forest canopy cover for the CalWood Fire. Further analysis of these variables paired with field data is necessary to understand the relationship between burn severity and treatments to guide future restoration efforts, improve forest resiliency, and mitigate fire risks.

Neal Swayze↗