Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

α-U and ω-UZr 2 in neutron irradiated U-10Zr annular metallic fuel

Here, to develop metallic fuel with ultra-high burnup of 30%-40%, an annular U-10Zr fuel with 55% smear density was fabricated through a casting route and irradiated at the Advanced Test Reactor at Idaho National Laboratory. The annular fuel design also serves as a demonstration of the feasibility to replace sodium bond with a helium bond to benefit the geological disposal of irradiated fuel, cut the cost of fuel fabrication, and boost the overall metallic fuel economy. This paper reports the results from transmission electron microscopy (TEM) based post-irradiation examination of this fuel type irradiated to a burnup of 3.3% fissions per initial heave metal atoms for initial screening purpose. After irradiation, the initial U-10Zr separated into an a-U annular region and an UZr 2+x center region with nanoscale spinodal decomposed microstructure. Because of the provided large amount of coherent interface areas, the fission gas atoms and vacancies generated in UZr 2+x phase are possibly pinned at the interface areas, leading to 20 times smaller fission gas bubbles than those in the neighboring a-U. The large bubbles in a-U become connected and merged into large pores that provide fast release paths for fission gas which prevents further fuel swelling. The fuel center still has open space to accommodate further fuel swelling from solid fission products at higher burnup. Other neutron irradiation induced phase and microstructure change are also characterized and compared with traditional solid fuel designs.

36 MATERIALS SCIENCE↗

In-situ 3D visualization of composite microstructure during polymer-to-ceramic conversion

One route for producing fiber-reinforced ceramic-matrix composites entails repeated impregnation and pyrolysis of a preceramic polymer in a fiber preform. The process relies crucially on the development of networks of contiguous cracks during pyrolysis, thereby allowing further impregnation to attain nearly-full densification. The present study employs in-situ x-ray computed tomography (XCT) to reveal in three dimensions the evolution of matrix structure during pyrolysis of a SiC-based preceramic polymer to 1200 °C. Observations are used to guide the development of a taxonomy of crack geometries and crack structures and to identify the temporal sequence of their formation. A quantitative analysis is employed to characterize effects of local microstructural dimensions on the conditions required to form cracks of various types. Complementary measurements of gas evolution and mass loss of the preceramic polymer during pyrolysis as well as changes in mass density and Young's modulus provide context for the physical changes revealed by XCT. Furthermore, the findings provide a foundation for future development of physics-based models to guide composite fabrication processes.

36 MATERIALS SCIENCE↗

Synthesis of one-dimensional porous Co{sub 3}O{sub 4} nanobelts and their ethanol gas sensing properties

Graphical abstract: 1D porous porous Co{sub 3}O{sub 4} nanobelts were synthesized via a facile route without use of any surfactants or organic solvent, exhibiting ethanol gas sensing properties superior to the commercial Co{sub 3}O{sub 4} powders. - Highlights: • One-dimensional porous Co{sub 3}O{sub 4} nanobelts were synthesized. • The belt-like morphology can be finely controlled via adjusting the reaction parameters. • The evolution process of porous Co{sub 3}O{sub 4} nanobelts was investigated. • Porous Co{sub 3}O{sub 4} nanobelts exhibit superior ethanol gas sensing properties. - Abstract: In this paper, one-dimensional porous Co{sub 3}O{sub 4} nanobelts were synthesized via a facile template-free hydrothermal method and subsequent the thermal decomposition. Their microstructures and morphologies were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and N{sub 2} adsorption–desorption techniques. The results indicate that the reaction parameters such as the molar ratio of Co(NO{sub 3}){sub 2}·6H{sub 2}O to C{sub 2}H{sub 4}N{sub 4}, the amount of Co(NO{sub 3}){sub 2}·6H{sub 2}O, the hydrothermal temperature and time play crucial rules in controlling the microstructures and morphologies of the as-prepared cobalt precursors. A possible formation mechanism was proposed. Moreover, the obtained porous Co{sub 3}O{sub 4} nanobelts exhibit ethanol gas sensing properties superior to the commercial Co{sub 3}O{sub 4} powders at a working temperature of 200 °C, suggesting their potential applications as nanosensors.

36 MATERIALS SCIENCE↗

Thermal Simulation Analysis of Microstructure and Hardness for CrMoV with PWHT in Type IV Region

Welded components of CrMoV steam pipe exhibit a pernicious form of type IV cracking after long-term service at elevated temperature. To investigate the cracking mechanism, the type IV microstructure and hardness were characterized after thermal simulation of post-weld heat treatment. Below 1098 K (825 °C), loss of carbon from the pearlite region was apparent, and the work zone exhibited a slightly lower hardness than the parent material because of a minor amount of austenite transformation. In addition, for peak temperatures above 1133 K (860 °C), additional transformation into austenite occurred and was followed by retransformation into ferrite upon further increasing the temperature. The pearlite formed at 1173 K to 1223 K (900 °C to 950 °C) resulted in an increase of the volume fraction of pearlite and microstructural refinement, which yielded a remarkable increase of hardness in the work zone. For the peak temperature of 1573 K (1300 °C), previous austenite grains were coarsened and alloy carbides were dissolved in the austenite, which significantly hardened the work zone.

36 MATERIALS SCIENCE↗

Evaluation of The Thermophysical Properties and Microstructure of UPu{sub 24}Zr{sub 15} Metallic Fuel

Featuring high burn-up, high fissile and fertile isotopic density, inherent safety characteristics, and favorable thermal response, actinide transmutation metallic fuels are considered to be among the most promising fuel classes for next generation fast reactors. During reactor operation, it is anticipated that fluctuations in chemical potential along the temperature gradient will lead to migration and redistribution of constituents between radial zones of the cylindrical fuel pin, resulting in compositional inhomogeneity and hence unpredictable fuel performance. Limited experimental fuel performance data is available for fuel selection and certification, therefore different compositions of options uranium-plutonium-zirconium (UPu- Zr) alloys have been investigated. Several complementary techniques, including scanning and transmission electron microscopy (SEM and TEM, respectively), differential scanning calorimetry (DSC), and laser flash diffusivity (LFD) techniques were used to characterize the phase distribution, microstructure, and thermophysical properties of unirradiated U-Pu-Zr fuels in both the as-cast and annealed condition. This information is necessary to understand the irradiated microstructure, properties, and performance of U-Pu-Zr fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laser Powder Bed Fusion Additive Manufacture Nb1Zr Development

Next generation fission and fusion nuclear reactors require materials that can withstand operating temperatures greater than 500 °C, neutron irradiation doses of up to 200 displacements per atom (dpa), and potentially corrosive coolants such as the alkali liquid metals sodium, lithium, and NaK (Na33K eutectic alloy). Refractory alloys, such as Nb1Zr (Nb-1wt%Zr) and Molybdenum alloy TZM (Mo-0.5wt%Ti-0.08wt%Zr) have been traditionally considered viable candidates for advanced fission and fusion reactor concepts. However, it is relatively difficult to generate complex geometries of interest from these alloys using traditional manufacturing methods. In addition, there needs to be a concentrated effort to address refractory metal challenges at elevated temperature operation. In order to generate complex geometries of interest, modern manufacturing techniques are considered to increase the technological readiness level (TRL), cost-effectiveness, and schedule savings. This work focused on the continued development of laser powder bed fusion (L-PBF) additive manufacturing (AM) to improve both design flexibility, evaluate microstructure and properties, and ultimately accelerate the TRL and qualification of these processes and alloys for components to potentially be put into service. Niobium alloy Nb1Zr was identified through a down-selection process outlined in previous reports as a candidate to develop in L-PBF AM. Historically, Nb1Zr had been explored for high temperature fast spectrum fission reactors for both terrestrial and space applications. Molybdenum alloy TZM has also been considered for these reactor concepts due to exceptional high-temperature strength, creep resistance, and stability under irradiation. L-PBF AM of TZM has previously been investigated at LANL under the Microreactor program, NASA, ORNL, and in academia. However, due to the crack prone nature of TZM, L-PBF AM of TZM resulted in significant microcracking and additional development is required to pursue viable maturation. Other AM methods have been found to be more successful in printing TZM, and those alternatives approaches are discussed in this effort. The efforts detailed in this report focused on continued development of Nb1Zr through L-PBF and development of TZM via L-PBF and electron powder bed fusion (E-PBF). The objective of this work was to further the development of these AM techniques for the chosen refractory alloys, elucidating and addressing associated challenges through characterization of several demonstration builds. At LANL, Nb1Zr builds were completed using an EOS M290 and M400 machines, and a refractory alloy-dedicated L-PBF system, the Xact Metal XM200G, was installed. The XM200G primary purpose was to do the Nb1Zr parameter development process; however, due to difficulties associated with the machine installation and qualification process, it was decided to pivot development to the larger M400 and M290 machines. Although the supply of Nb1Zr powder was limited, it was sufficient to generate sub-scale metallographic specimens for the purpose of parameter development. This was first accomplished on the EOS M400 then the M290 due to machine schedule availability. Further development of TZM has been initiated at the University of Texas El Paso (UTEP) under contract with LANL to use both a heated build envelope L-PBF machine and E-PBF machine that have been found in the literature to mitigate microcracking. UTEP was provided with TZM powder and build plates to support parallel TZM parameter development across both machines. As part of the contract, UTEP will also be conducting microstructural characterization once optimized process parameters have been identified. The optimized process parameters for each machine will be used to generate a series of metallographic, mechanical, and surface finish specimens for subsequent characterization and testing. In the next section, we provide a detailed discussion of the methodology used for investigating the feasibility of leveraging these alloys for use in advanced reactor applications.

36 MATERIALS SCIENCE↗

High-Entropy Alloy R&D for Accelerator Beam Window Applications

High-Entropy Alloys are a class of novel material that can offer improved resistance to beam-induced radiation damage and thermal shock. Development of these new alloys to serve as beam windows in multi-megawatt accelerator target applications is ongoing at Fermilab. Currently we are investigating AlCoCrMnTiV alloy systems of 4-6 components for service as beam windows; these compositions are predicted by CALPHAD simulation to have a low density and single-phase BCC crystal structure. The microstructures of these systems are being studied by electron microscopy techniques such as energy dispersive X-ray spectroscopy (EDS) to determine elemental homogeneity and composition, electron backscatter diffraction (EBSD) to quantify grain structure and orientation, and transmission electron microscopy (TEM) to observe defect structures and precipitate formation; nanoindentation is used to probe microstructural mechanical properties. Initial bulk property characterization utilizes differential scanning calorimetry to quantify specific heat capacity (cp), dilatometry to determine the coefficient of thermal expansion (CTE), and time-domain thermoreflectance (TDTR) to measure thermal conductivity (K). A miniature tensile testing apparatus is also being developed to test tensile properties. Post-irradiation examination is currently ongoing for several of these compositions that have been irradiated by low-energy ions to damage levels and at a temperature relevant to beam window applications at future next-generation accelerator facilities. This talk will briefly describe the alloy design and synthesis before going into more depth covering microstructural pre-characterization, and post-irradiation examination results from low-energy ion irradiated specimens. This will be followed by the plans for alloy down selection and future prototypic proton irradiations.

43 PARTICLE ACCELERATORS↗

Concavity-based local erosion and sphere-size-based local dilation applied to lithium-ion battery electrode microstructures for particle identification

Performance metrics of lithium-ion batteries can be extracted from the analysis of electrode microstructures nanoscale imaging. The characterization workflow can involve a challenging particle identification, or instance segmentation, step. In this work, we propose a new identification method based on an original transformation: a sphere-size-based local dilation followed by a concavity-based local erosion, that is local morphology closing. The new transformation is much more efficient than the global morphology closing, with correct identification achieved with only 1.7 % dilation volume and 2.6 % erosion volume on a test geometry, compared to 39.2 % and more than 50 %, respectively, with its global counterpart. The new method has been then benchmarked versus other identification algorithms (watershed and pseudo coulomb repulsive field) on a real electrode microstructure with equal or better segmentation achieved.

25 ENERGY STORAGE↗

Boride-based Ceramic Super-high Temperature Thermocouples in Harsh Environments (Final Scientific/Technical Report)

An electromotive force (emf) can be generated along a temperature gradient between the cold end and hot end of a thermoelectric material, termed the Seebeck effect. Based on the Seebeck effect, metallic alloys have been extensively employed to detect temperatures for centuries, named thermocouples. However, commercially available thermocouple alloys suffer from limitations, such as oxidation, chemical degradation, and poor long-term stability under high-temperature harsh environments. This DOE-funded project aimed to develop high-temperature, chemically tolerant thermocouples suitable for operation in extreme environments relevant to semiconducting thermoelectric materials. The research focused on boride-based semiconducting thermoelectric compounds as candidates for next-generation thermocouples with enhanced oxidation resistance, chemical stability, and thermal robustness under conditions representative of charcoal-fired electricity facilities. During the funded years, boride materials were synthesized using an arc-plasma technique under ambient air and argon atmospheres, enabling scalable and cost-effective production compared with conventional boride fabrication methods. The synthesized borides were processed into nanostructured powders, followed by consolidation into dense bulk materials using a spark plasma sintering (SPS) bottom-up approach. Comprehensive characterization was performed, including microstructural analysis, electrical transport measurements, and optical and thermal property evaluation. Both p-type and n-type boride electric legs were fabricated and integrated into boride-based thermocouples. The thermal and irradiation stabilities of the boride nanomaterials and bulk thermoelectric materials were systematically evaluated to assess suitability for long-term operation in harsh environments. Additionally, 12 students were broadly hands-on trained spanning the full research workflow, including word processing and technical editing (e.g., LATEX for manuscript and poster preparation), data collection and analysis (using Python and related libraries and hardware interfaces), sample preparation (including arc-plasma synthesis and spark plasma sintering), and advanced characterization techniques (such as X-ray diffraction, UV–vis spectroscopy, electron microscopy, differential thermal analysis (DTA), and Seebeck coefficient measurements, etc). Overall, this project demonstrated the feasibility of boride-based thermoelectric materials as durable high-temperature thermocouples, providing a promising pathway toward robust temperature sensing technologies aligned with DOE energy infrastructure and extreme-environment monitoring needs.

20 FOSSIL-FUELED POWER PLANTS↗

Rheology and Microstructure of Entangled Polymer Nanocomposite Melts

The rheology and microstructure of 44 nm diameter silica particles suspended in entangled poly(ethylene oxide) (PEO) melts are studied through measurement of filled melt viscosity and X-ray scattering measurement of interparticle structure factors, S(q,{phi}{sub c}), where q is the scattering vector and {phi}{sub c} is the silica volume fraction. The particles have a similar refractive index to PEO which minimizes van der Waals attractions acting between particles. The introduction of particles causes an elevation in the viscosity of the nanocomposite melt more than would be expected of particles merely interacting with hard core repulsions. Further addition of particles causes a rise in the elastic and viscous moduli. The rheological characterization of these nanocomposite melts is discussed in terms of several critical particle volume fractions that result from confinement of polymer, adsorption of polymer segments to the particle surface, and overlap and entanglement of adsorbed polymer as the particle volume fraction is increased. Characterization of the particle microstructure shows that the association of the polymer with the particles drives the particles to structure more than would be expected of particles with interactions governed merely by hard core repulsions. Particles show signs of instability in the polymer melt at a common elevated volume fraction independent of polymer molecular weight.

36 MATERIALS SCIENCE↗

Quantification of grain rotation in bulk nanostructured copper via in situ heating white beam synchrotron X-ray diffraction

Grain rotation during microstructural relaxation under heating is conventionally studied extensively through transmission electron microscopy and simulations. However, there is a shortage in examining grain rotations at larger length and volume scales in bulk materials. It is critical to understand the thermal stability of bulk nanostructured metals, since those enhanced mechanical properties have been well recognized. Here, this study aimed to employ a white beam microdiffraction X-ray technique under in situ heating from 300 K to 1073 K at 12 K/min on a nanostructured copper processed by high-pressure torsion, yielding an initial grain size of ∼260 nm before the heating. Evaluation across a wide range of temperatures reveals transition temperatures associated with microstructural relaxation processes. By tracking separate Laue diffraction peaks stemming from individual grains, changes in their orientations can be estimated and quantified. This approach becomes particularly effective when the number of grains within the probed volume is reasonably small. At temperatures above 940 K, about 7.5 % of Cu grains are rotating at speeds of ∼2 × 10 –3 °/s. The radial direction of the disk specimen is found to be the preferred direction of grain rotation, with the rotation axis along the shear direction. Further analysis found no correlation between peak intensity and peak size, related to grain sizes and deviatoric strain, respectively, with rotation conditions or speed. These findings demonstrate that the diffraction technique utilizing white beam X-rays is a complementary and novel characterization tool for understanding microstructural evolution, especially in grain rotations, of bulk crystalline materials.

Grain orientation↗

Computational thermodynamics aided design of novel ferritic alloys

With the aid of computational thermodynamics, Ni was identified to suppress the liquidus temperature of Fe 2 Zr and four Fe-Cr-Ni-Zr alloys were designed to study the Ni effect on the phase stability of Fe 2 Zr laves_phase. These alloys were fabricated through traditional arc-metling, followed by annealing at 1000 C for 336 hours and 700 C for 1275 hours. The microstructure were examined and characterized by SEM BSE image, EDS compositional mapping and point scan, XRD and TEM analysis. The major results were summarized below: 1)For investigated alloys with 12wt% Cr, 3~6wt% Zr and 3~9 wt%Ni, the phases in equilibrium with the BCC phase are C15_Laves phase, Fe 23 Zr 6 phase. The volume fraction of intermetallic phases increases with Ni and Zr contents. 2)Instead of (Fe,Cr) 2 Zr C14_Laves phase, Ni stabilizes the C15_Laves structure in Fe-Cr-Ni-Zr alloys by substituting Fe and Cr atoms with Ni atoms in the first sublattice. 3)Fe 23 Zr 6 , that is metastable in the Fe-Cr-Zr ternary, is also stabilized by Ni addition. 4)Ni 7 Zr 2 phase was observed in samples with high Ni/Zr ratio. Extensive solubility of Fe was identified in the phase. The microstructural and composition results obtained from this study will be incorportated into the the Fe-Cr-Ni-Zr database. The current samples will be subjected to ion irradiaition to be compared with those results for Fe-Cr-Zr alloys. Additional alloys will be designed to form (Fe,Cr,Ni) 2 Zr nanoprecipitates for further studies.

36 MATERIALS SCIENCE↗

Understanding Microstructural Evolution During Rapid Heat Treatment of Microalloyed Steels Through Computational Modeling, Advanced Physical Simulation, and Multiscale Characterization Techniques

An AISI 1045 steel modified with vanadium (V) and niobium (Nb) was studied to evaluate microstructural conditioning prior to and throughout a rapid heat treat process. In order to accomplish this, both computational and physical simulation techniques have been employed with the goal of assessing the microstructural evolution in a medium-carbon bar steel during the rapid austenitization and quenching procedures involved in an induction hardening process. The appropriate thermal profiles for induction hardening were obtained through finite element modeling using Flux 2D software. Physical simulations of the induction hardening process were carried out using a Gleeble{sup ®} 3500. Analysis of prior austenite grain size is complemented by observation of nanoscale carbonitride precipitation via transmission electron microscopy, scanning transmission electron microscopy, and high-energy synchrotron small-angle x-ray scattering. Through a combination of characterization techniques, this study presents a deeper understanding of nano- and microstructural changes occurring in a microalloyed steel during an induction hardening process.

36 MATERIALS SCIENCE↗

Optical and electro-optic properties of micrometric thick lead zirconate titanate films on (Pb{sub 0.86},La{sub 0.14})TiO{sub 3}/glass

Highly (100)-oriented Pb(Zr{sub 0.52},Ti{sub 0.48})O{sub 3} (PZT) films of up to approx2.4 mum are deposited on the (Pb{sub 0.86},La{sub 0.14})TiO{sub 3} (PLT)-coated amorphous substrate by one cycle of sputtering and annealing. The films possess fibrous columnar nanostructures and vertically grow on the PLT/glass substrate. Microstructure analysis and property characterization indicate that the films possess very promising optical, waveguiding, and electro-optic (EO) properties, as well as low propagation loss. The transparency of >80% in the range of lambda=400-1200 nm and the linear EO coefficient of 341.4 pm/V have been measured in the films. Due to the large EO coefficient and the micrometric thickness, a giant phase retardation of 2.93 rad has been measured under an electric field of 50 kV/mm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

On the amorphization behavior and hydrogenation performance of high-energy ball-milled Mg{sub 2}Ni alloys

Amorphous Mg{sub 2}Ni alloy was prepared by high energy ball-milling starting with polycrystalline Mg{sub 2}Ni which was prepared with the help of a metallurgy method by using a SPEX 8000D mill. The microstructural and phase structure characterization of the prepared materials was performed via scanning electron microscopy, transition electron microscope and X-ray diffraction. The thermal stabilities were investigated by differential scanning calorimetry. The apparent activation energies were determined by means of the Kissinger method. The first and second crystallization reactions take place at ∼ 255 °C and ∼ 410 °C, and the corresponding activation energy of crystallization is E{sub a1} = 276.9 and E{sub a2} = 382.4 kJ/mol, respectively. At 3 MPa hydrogen pressure and 250 °C, the hydrogen absorption capacities of crystalline, partially and fully amorphous Mg{sub 2}Ni alloy are 2.0 wt.%, 3.2 wt.% and 3.5 wt.% within 30 min, respectively. - Graphical Abstract: We mainly focus on the amorphization behavior of crystalline Mg{sub 2}Ni alloy in the high energy ball-milling process and the crystallization behavior of the amorphous Mg{sub 2}Ni alloy in a follow-up heating process. The relationship of milling, microstructure and hydrogenation properties is established and explained by models. - Highlights: • Amorphous Mg{sub 2}Ni has been obtained by high energy ball milling the as-cast alloy. • The amorphization behavior of polycrystalline Mg{sub 2}Ni is presented. • The crystallization behavior of the amorphous Mg{sub 2}Ni alloy is illustrated. • Establish the relationship of milling, microstructure and hydrogenation properties.

36 MATERIALS SCIENCE↗

Materials informatics: From the atomic-level to the continuum

We report that in recent years materials informatics, which is the application of data science to problems in materials science and engineering, has emerged as a powerful tool for materials discovery and design. This relatively new field is already having a significant impact on the interpretation of data for a variety of materials systems, including those used in thermoelectrics, ferroelectrics, battery anodes and cathodes, hydrogen storage materials, polymer dielectrics, etc. Its practitioners employ the methods of multivariate statistics and machine learning in conjunction with standard computational tools (e.g., density-functional theory) to, for example, visualize and dimensionally reduce large data sets, identify patterns in hyperspectral data, parse microstructural images of polycrystals, characterize vortex structures in ferroelectrics, design batteries and, in general, establish correlations to extract important physics and infer structure-property-processing relationships. In this Overview, we critically examine the role of informatics in several important materials subfields, highlighting significant contributions to date and identifying known shortcomings. We specifically focus attention on the difference between the correlative approach of classical data science and the causative approach of physical sciences. From this perspective, we also outline some potential opportunities and challenges for informatics in the materials realm in this era of big data.

36 MATERIALS SCIENCE↗

In situ laser-based resonant ultrasound measurements of microstructure mediated mechanical property evolution

In situ laser-based resonant ultrasound spectroscopy is used to characterize the development of a recrystallized microstructure in a high purity copper sample. The modal shapes, used for mode identification, of several resonant modes are determined before and after annealing by raster scanning the laser interferometric probe. This information is used to isolate the motion of individual modes during high temperature annealing. The evolution of a particular mode during annealing is examined in detail. During recrystallization, the center frequency of this mode shifts by approximately 20% of the original value. Using electron backscatter data it is shown that the majority of this shift is due to changes in the polycrystal average elastic stiffness tensor, driven by changes in texture, and that changes in dislocation density and pinning length are secondary influences.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗