Search NASA⌕ Search

SEARCH · Search NASA

Results for “random processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Electrodynamic force of dielectric barrier discharge

The periodic electrostatic force of dielectric barrier discharge (DBD) in nitrogen for flow control is investigated by a system of physics-based, two-dimensional model equations. The plasma generation process of DBD is mainly the avalanche growth of electrons through the secondary emission from cathode. Therefore, the charged particle motion of a succession of random micro discharges can be approximated by the drift-diffusion model. The force of DBD generated by charge separation and accumulation over the dielectrics is obtained by solving the model equations with the rigorous media interface boundary condition of Maxwell equations in the time domain. The discharge structure and force components by different electrical permittivity and amplitudes of externally applied electrical potential are delineated and quantified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Timescales of Quantum Equilibration, Dissipation and Fluctuation in Nuclear Collisions

Understanding the dynamics of equilibration processes in quantum systems as well as their interplay with dissipation and fluctuation is a major challenge in quantum many-body theory. The timescales of such processes are investigated in collisions of atomic nuclei using fully microscopic approaches. Findings from time-dependent Hartree-Fock and time-dependent random-phase approximation calculations are compared for 13 systems over a broad range of energies. The timescale for full mass equilibration ( ~ 2 × 10 - 20 s ) is found to be much larger than timescales for neutron-to-proton equilibration, kinetic energy, and angular momentum dissipations which are on the order of 10 - 21 s . Fluctuations of mass numbers in the fragments and correlations between their neutron and proton numbers build up within only a few 10 - 21 s . This suggests that dissipation is basically not impacted by mass equilibration, but is mostly driven by the exchange of nucleons between the fragments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

WARP

WARP, which can stand for ``Weaving All the Random Particles,'' is a three-dimensional (3D) continuous energy Monte Carlo neutron transport code developed at UC Berkeley to efficiently execute on NVIDIA graphics processing unit (GPU) platforms. WARP accelerates Monte Carlo simulations while preserving the benefits of using the Monte Carlo method, namely, that very few physical and geometrical simplifications are applied. WARP is able to calculate multiplication factors, neutron flux distributions (in both space and energy), and fission source distributions for time-independent neutron transport problems. It can run in both criticality or fixed source modes, but fixed source mode is currently not robust, optimized, or maintained in the newest version. WARP can transport neutrons in unrestricted arrangements of parallelepipeds, hexagonal prisms, cylinders, and spheres. The goal of developing WARP is to investigate algorithms that can grow into a full-featured, continuous energy, Monte Carlo neutron transport code that is accelerated by running on GPUs. The crux of the effort is to make Monte Carlo calculations faster while producing accurate results. Modern supercomputers are commonly being built with GPU coprocessor cards in their nodes to increase their computational efficiency and performance. GPUs execute efficiently on data-parallel problems, but most CPU codes, including those for Monte Carlo neutral particle transport, are predominantly task-parallel. WARP uses a data-parallel neutron transport algorithm to take advantage of the computing power GPUs offer.

Bergmann, RyanM. [University of California - Berke↗

Model-based optimization of near-field binary-pixelated beam shapers

The optimization of components that rely on spatially dithered distributions of transparent or opaque pixels and an imaging system with far-field filtering for transmission control is demonstrated. The binary-pixel distribution can be iteratively optimized to lower an error function that takes into account the design transmission and the characteristics of the required far-field filter. Simulations using a design transmission chosen in the context of high-energy lasers show that the beam-fluence modulation at an image plane can be reduced by a factor of 2, leading to performance similar to using a non-optimized spatial-dithering algorithm with pixels of size reduced by a factor of 2 without the additional fabrication complexity or cost. The optimization process preserves the pixel distribution statistical properties. Analysis shows that the optimized pixel distribution starting from a high-noise distribution defined by a random-draw algorithm should be more resilient to fabrication errors than the optimized pixel distributions starting from a low-noise, error-diffusion algorithm, while leading to similar beamshaping performance. Furthermore, this is confirmed by experimental results obtained with various pixel distributions and induced fabrication errors.

43 PARTICLE ACCELERATORS↗

Workshop on Incomplete Network Data Held at Sandia National Labs – Livermore

While network analysis is applied in a broad variety of scientific fields (including physics, computer science, biology, and the social sciences), how networks are constructed and the resulting bias and incompleteness have drawn more limited attention. For example, in biology, gene networks are typically developed via experiment -- many actual interactions are likely yet to be discovered. In addition to this incompleteness, the data-collection processes can introduce significant bias into the observed network datasets. For instance, if you observe part of the World Wide Web network through a classic random walk, then high degree nodes are more likely to be found than if you had selected nodes at random. Unfortunately, such incomplete and biasing data collection methods must be often used.

97 MATHEMATICS AND COMPUTING↗

WARP

WARP, which can stand for ``Weaving All the Random Particles,'' is a three-dimensional (3D) continuous energy Monte Carlo neutron transport code developed at UC Berkeley to efficiently execute on NVIDIA graphics processing unit (GPU) platforms. WARP accelerates Monte Carlo simulations while preserving the benefits of using the Monte Carlo method, namely, that very few physical and geometrical simplifications are applied. WARP is able to calculate multiplication factors, neutron flux distributions (in both space and energy), and fission source distributions for time-independent neutron transport problems. It can run in both criticality or fixed source modes, but fixed source mode is currently not robust, optimized, or maintained in the newest version. WARP can transport neutrons in unrestricted arrangements of parallelepipeds, hexagonal prisms, cylinders, and spheres. The goal of developing WARP is to investigate algorithms that can grow into a full-featured, continuous energy, Monte Carlo neutron transport code that is accelerated by running on GPUs. The crux of the effort is to make Monte Carlo calculations faster while producing accurate results. Modern supercomputers are commonly being built with GPU coprocessor cards in their nodes to increase their computational efficiency and performance. GPUs execute efficiently on data-parallel problems, but most CPU codes, including those for Monte Carlo neutral particle transport, are predominantly task-parallel. WARP uses a data-parallel neutron transport algorithm to take advantage of the computing power GPUs offer.

Bergmann, Ryan M.↗

Large-scale calculations of 𝛽-decay rates and implications for 𝑟-process nucleosynthesis

Nuclear 𝛽 decay is a key element of the astrophysical rapid neutron capture process (𝑟 process). In this work, we present state-of-the-art global 𝛽-decay calculations based on the quantified relativistic nuclear energy density functional theory and the deformed proton-neutron quasiparticle random-phase approximation. Our analysis considers contributions from allowed and first-forbidden transitions. We used two point-coupling functionals with carefully calibrated time-odd terms and isoscalar pairing strength. The new calculations display consistent results for both employed functionals, especially near the neutron drip line, suggesting slower 𝛽 decays past the 𝑁=126 neutron shell closure than in commonly used 𝛽-decay models. The new rates, along with the existing rates based on the recent nonrelativistic global calculations, are found to slow down the synthesis of heavy elements in the 𝑟 process and significantly reduce the contribution of neutron-induced fission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Data and Scripts associated with a manuscript on ecosystem responses to wildfires in the Columbia River Basin

This data package is associated with the publication “Ecosystem leaf area, gross primary production, and evapotranspiration responses to wildfire in the Columbia River Basin” submitted to Biogeosciences (Shi et al., 2024; doi: 10.22541/au.171053013.30286044/v1). In this research, data products, leaf area index (LAI), gross primary production (GPP), and evapotranspiration (ET), from the Moderate Resolution Imaging Spectroradiometer (MODIS) are used to quantify the resistance and resilience of different ecosystem types in the Columbia River Basin (CRB). A machine learning algorithm, random forest (RF), was used to examine the impacts of precipitation, vapor pressure deficit (VPD), and burn severity from Monitoring Trends in Burn Severity (MTBS) on ecosystem resilience. The data package includes the processed MODIS data products, precipitation, VPD, and burn severity in 138 fire regions in CRB and the input files for RF model training. This data package includes six folders. The MODIS products are included in three MODIS_* folders with shell scripts for data clipping and *ncl files for data processing: (1) “/MODIS_LAI_CRB”; (2) “/MODIS_GPP_CRB”; and (3) “/MODIS_ET_CRB”. All the processed data for each fire event are NetCDF formatted. The MTBS burn severity data and the shell and *ncl scripts used for data processing are in the folder named (4) “MTBS_fire”. The ERA meteorological fields and the data processing scritps are in (5) “ERA_Var_CR”. All the scripts for figure development are in the format of *ncl and in the folder (6) “paper_scripts”. See the file ending in “flmd.csv” for a list of all files contained in this data package and descriptions for each. Tabular column headers and units are described in the data dictionary file ending in “dd.csv”.

54 ENVIRONMENTAL SCIENCES↗

Ensemble Simulation Techniques and Fast Randomized Algorithms

The major goals of the project were to develop and analyze new ensemble simulation techniques, including trajectory stratification and preconditioned MCMC techniques, as well as develop fast numerical linear algebra techniques closely related to ensemble simulation ideas. The trajectory stratification techniques involve simulating in parallel short trajectory fragments of a Markov process confined to a specific region of space‐time and then patching together the statistics gathered to assemble estimates of very general dynamical properties. We have also developed this approach for rare event simulation and extended the techniques to applications requiring a more general framework (such as electronic structure calculations). The preconditioned MCMC techniques involve simulating multiple Markov chains in parallel and then using information from the ensemble to speed the mixing of each individual chain. The fast randomized linear algebra methods are motivated by the diffusion Monte Carlo technique, but are applicable to finding the dominant eigenvalue of (almost) general matrices. For most non‐negative matrices, the schemes result in an error (compared to the power method) that is constant in the dimension of the problem. For more general matrices, we see a very clear sublinear cost trend in computational tests.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Estimation of hydraulic conductivity in a watershed using sparse multi-source data via Gaussian process regression and Bayesian experimental design

Enhanced water management systems depend on accurate estimation of subsurface hydraulic properties. However, geologic formations can vary significantly, so information from a single source (e.g., widely spaced boreholes) is insufficient in characterizing subsurface aquifer properties. Therefore, multiple sources of information are needed to complement the hydrogeology understanding of a region. Here, this study presents a numerical framework in which information from different measurement sources is combined to characterize the 3D random field in a multi-fidelity prediction model. Coupled with the model, a Bayesian experimental design was used to determine the best future sampling locations. The Upper Sangamon watershed in east-central Illinois was selected as the case study site, where the multi-fidelity Gaussian process model was used to estimate the hydraulic conductivity in the region of interest. Multi-source observation data were obtained from electrical resistivity and borehole pumping tests. The accuracy of the model prediction is dependent on the locations and the distribution of both high- and low-fidelity data. Furthermore, the multi-fidelity model was compared with the single-fidelity model. The uncertainties and confidence in the measurements and parameter estimates were quantified and used to design future cycles of data collection to further improve the confidence intervals.

54 ENVIRONMENTAL SCIENCES↗

DYNAMICAL FIELD LINE CONNECTIVITY IN MAGNETIC TURBULENCE

Point-to-point magnetic connectivity has a stochastic character whenever magnetic fluctuations cause a field line random walk, but this can also change due to dynamical activity. Comparing the instantaneous magnetic connectivity from the same point at two different times, we provide a nonperturbative analytic theory for the ensemble average perpendicular displacement of the magnetic field line, given the power spectrum of magnetic fluctuations. For simplicity, the theory is developed in the context of transverse turbulence, and is numerically evaluated for the noisy reduced MHD model. Our formalism accounts for the dynamical decorrelation of magnetic fluctuations due to wave propagation, local nonlinear distortion, random sweeping, and convection by a bulk wind flow relative to the observer. The diffusion coefficient D{sub X} of the time-differenced displacement becomes twice the usual field line diffusion coefficient D{sub x} at large time displacement t or large distance z along the mean field (corresponding to a pair of uncorrelated random walks), though for a low Kubo number (in the quasilinear regime) it can oscillate at intermediate values of t and z. At high Kubo number the dynamical decorrelation decays mainly from the nonlinear term and D{sub X} tends monotonically toward 2D{sub x} with increasing t and z. The formalism and results presented here are relevant to a variety of astrophysical processes, such as electron transport and heating patterns in coronal loops and the solar transition region, changing magnetic connection to particle sources near the Sun or at a planetary bow shock, and thickening of coronal hole boundaries.

79 ASTRONOMY AND ASTROPHYSICS↗

Component evolution in general random intersection graphs

We analyze component evolution in general random intersection graphs (RIGs) and give conditions on existence and uniqueness of the giant component. Our techniques generalize the existing methods for analysis on component evolution in RIGs. That is, we analyze survival and extinction properties of a dependent, inhomogeneous Galton-Watson branching process on general RIGs. Our analysis relies on bounding the branching processes and inherits the fundamental concepts from the study on component evolution in Erdos-Renyi graphs. The main challenge becomes from the underlying structure of RIGs, when the number of offsprings follows a binomial distribution with a different number of nodes and different rate at each step during the evolution. RIGs can be interpreted as a model for large randomly formed non-metric data sets. Besides the mathematical analysis on component evolution, which we provide in this work, we perceive RIGs as an important random structure which has already found applications in social networks, epidemic networks, blog readership, or wireless sensor networks.

97 MATHEMATICS AND COMPUTING↗

Fe Vacancy Order and Domain Distribution in A{sub x}Fe{sub 2−y}Se{sub 2}

The Fe vacancy and its ordering pattern is a unique property of the A{sub x}Fe{sub 2−y}Se{sub 2} (A = K, Rb, Cs) superconductors. Below the structural transition temperature T{sub S} ∼ 550 K, the system phase separates into the I4/mmm phase with no Fe vacancy and the I4/m phase with the √5×√5×1 vacancy order. In this work, an Ising-like Hamiltonian defined on the Fe-sublattice is constructed and employed in a Metropolis Monte Carlo simulation to study the Fe vacancy order and the domain distribution under different thermal treatments. A third phase with randomly distributed Fe vacancies and space group I4/mmm is observed in the simulation. The response of the volume fraction of this simulated phase under thermal treatment shows a direct connection to the change of the superconducting shielding fraction under annealing and quenching processes, indicating a close relation between the vacancy disordered I4/mmm phase and the superconducting phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On a framework for generating PoD curves assisted by numerical simulations

The Probability of Detection (PoD) curve method has emerged as an important tool for the assessment of the performance of NDE techniques, a topic of particular interest to the nuclear industry where inspection qualification is very important. The conventional experimental means of generating PoD curves though, can be expensive, requiring large data sets (covering defects and test conditions), and equipment and operator time. Several methods of achieving faster estimates for PoD curves using physics-based modelling have been developed to address this problem. Numerical modelling techniques are also attractive, especially given the ever-increasing computational power available to scientists today. Here we develop procedures for obtaining PoD curves, assisted by numerical simulation and based on Bayesian statistics. Numerical simulations are performed using Finite Element analysis for factors that are assumed to be independent, random and normally distributed. PoD curves so generated are compared with experiments on austenitic stainless steel (SS) plates with artificially created notches. We examine issues affecting the PoD curve generation process including codes, standards, distribution of defect parameters and the choice of the noise threshold. We also study the assumption of normal distribution for signal response parameters and consider strategies for dealing with data that may be more complex or sparse to justify this. These topics are addressed and illustrated through the example case of generation of PoD curves for pulse-echo ultrasonic inspection of vertical surface-breaking cracks in SS plates.

36 MATERIALS SCIENCE↗

PEDOT:PSS with embedded TiO{sub 2} nanoparticles as light trapping electrode for organic photovoltaics

The performance of organic optoelectronic devices can be improved by employing a suitable optical cavity design beyond the standard plane layer approach, e.g., by the inclusion of periodically or randomly textured structures which increase light incoupling or extraction. One of the simplest approaches is to add an additional layer containing light scattering particles into the device stack. Solution processed poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) thin films are promising for replacing the brittle and expensive indium tin oxide transparent electrode. We use a blend of 100 nm TiO{sub 2} scattering particles in PEDOT:PSS solution to fabricate transparent electrode films which also functions as a scattering layer. When utilized in an organic photovoltaic device, a power conversion efficiency of 7.92% is achieved, which is an 8.6% relative improvement compared to a device with a neat PEDOT:PSS electrode without the nanoparticles. This improvement is caused by an increase in short-circuit current due to an improved photon harvesting in the 320 nm–700 nm spectral wavelength range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Description of the 2{nu}{nu}{beta}{beta} decay within a fully renormalized proton-neutron quasiparticle random-phase approximation approach with a restored gauge symmetry

A many-body Hamiltonian involving the mean field for a projected spherical single-particle basis, the pairing interactions for alike nucleons, and the dipole-dipole proton-neutron interactions in the particle-hole (ph) channel and the ph dipole pairing potential is treated by the projected gauge fully renormalized proton-neutron quasiparticle random phase approximation approach. The resulting wave functions and energies for the mother and daughter nuclei are used to calculate the 2{nu}{beta}{beta} decay rate and the process half-life. For illustration, the formalism is applied for the decay {sup 100}Mo{yields}{sup 100}Ru. The calculated half-life is in agreement with the corresponding experimental data. The Ikeda sum rule is obeyed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probabilistic-learning-based stochastic surrogate model from small incomplete datasets for nonlinear dynamical systems

We consider a high-dimensional nonlinear computational model of a dynamical system, parameterized by a vector-valued control parameter, in the presence of uncertainties represented by an uncontrolled parameter modeled by a vector-valued random variable, and possibly with stochastic excitation. The objective is to construct a statistical surrogate model where the input is any deterministic value of the control parameter, and the output is a vector-valued observation of the computational model, which is a random vector whose probability measure is updated using a target dataset. To construct this statistical surrogate model, the stochastic response of the computational model must be built, which is a vector-valued time-discretized stochastic process in high dimension, depending on the control parameter. It is assumed that the computational cost of a single evaluation of the deterministic model is high. For the probabilistic updating, we consider a subset of the components of the observation of the computational model, defined as the “identification observation” of the computational model, for which a small target dataset is available. Therefore, the target dataset is associated with partial observability, corresponding to an incomplete data case. Given a prior probability model of the random control and uncontrolled parameters, a training dataset is constructed, consisting of realizations of the random triplet composed of the stochastic response, the random identification observation, and the random control parameter. Since the computational cost of a single evaluation of the deterministic model is assumed to be large, the training dataset is also of small size. The main challenges in this problem are the high dimensionality, partial observability leading to incomplete data in the target dataset for the identification observation of the computational model (which is not sufficient to identify the computational stochastic responses), and the availability of a small training dataset. To address these challenges, we propose a methodology based on statistical methods for constructing necessary reduced representations, direct probabilistic learning under constraints using probabilistic learning on manifolds (PLoM) constrained by the target dataset, and the use of a weak formulation of the Fourier transform of probability measures. Statistical conditioning is also employed to explore the learned dataset. The constructed predictive statistical surrogate model can be implemented in the context of online computation. Here, we apply this approach to a problem of nonlinear stochastic dynamics in high dimensions within the framework of deformable solids mechanics.

Engineering↗