Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Propene Metathesis over Supported Tungsten Oxide Catalysts: A Study of Active Site Formation

A detailed investigation was conducted on the factors influencing the properties of silica-supported tungsten oxide catalysts for propene metathesis. A principal goal of this work was to identify the processes involved in the formation of catalytically active sites. To probe the influence of dispersion, samples were prepared across a range of W loadings using two methods of catalyst preparation: incipient wetness impregnation of amorphous silica and ion exchange of mesoporous SBA-15. The samples were characterized by nitrogen adsorption, UV-vis, Raman, and X-ray absorption spectroscopy (XAS). Catalytic activity was observed to increase with W surface concentration up to the point where WO 3 nanoparticles formed. The catalytic performance of all samples was enhanced 2-fold by pretreatment in He, in comparison to pretreatment in air. In situ characterization of samples pretreated in He by Raman and XAS shows an increase in the relative concentration of isolated dioxo W(6+) species relative to mono-oxo W(6+) species, and in situ XAS data collected during propene metathesis indicated that a similar conversion occurs for air-pretreated samples in the presence of propene. For both air- and He-pretreated catalysts an activation period was observed, during which the activity increased and attained steady-state activity. This period was significantly longer for air-pretreated catalysts and was accompanied by the transient formation of acetone. While acetone was not observed during the much shorter transient of He-pretreated samples, in situ XAS provided evidence of reduction occurring in these samples upon contact with propene. In conclusion, it is also notable that, independent of the manner of catalyst preparation or pretreatment, the rate of propene metathesis is first order in propene and exhibits an activation energy of 200 kJ/mol. A model is proposed to explain why only a fraction of the isolated tungstate species is active for propene metathesis (~5%) and why this fraction increases with increasing concentration of W dispersed on silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variability-selected Intermediate-mass Black Hole Candidates in Dwarf Galaxies from ZTF and WISE

While it is difficult to observe the first black hole seeds in the early universe, we can study intermediate-mass black holes (IMBHs) in local dwarf galaxies for clues about their origins. In this paper we present a sample of variability-selected active galactic nuclei (AGN) in dwarf galaxies using optical photometry from the Zwicky Transient Facility (ZTF) and forward-modeled mid-IR photometry of time-resolved Wide-field Infrared Survey Explorer (WISE) co-added images. We found that 44 out of 25,714 dwarf galaxies had optically variable AGN candidates and 148 out of 79,879 dwarf galaxies had mid-IR variable AGN candidates, corresponding to active fractions of 0.17% ± 0.03% and 0.19% ± 0.02%, respectively. We found that spectroscopic approaches to AGN identification would have missed 81% of our ZTF IMBH candidates and 69% of our WISE IMBH candidates. Only nine candidates have been detected previously in radio, X-ray, and variability searches for dwarf galaxy AGN. The ZTF and WISE dwarf galaxy AGN with broad Balmer lines have virial masses of 10 5 M ⊙ < M BH < 10 7 M ⊙ , but for the rest of the sample, BH masses predicted from host galaxy mass range between 10 5.2 M ⊙ < M BH < 10 7.25 M ⊙ . We found that only 5 of 152 previously reported variability-selected AGN candidates from the Palomar Transient Factory in common with our parent sample were variable in ZTF. We also determined a nuclear supernova fraction of 0.05% ± 0.01% yr -1 for dwarf galaxies in ZTF. Our ZTF and WISE IMBH candidates show the promise of variability searches for the discovery of otherwise hidden low-mass AGN.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of Infrequent Samples from the Concentration, Storage, and Transfer Facility: F-Area Pump Pit 3 (FPP-3) Sump Sample: December 2021 Sample

In December 2021, SRR-E sent an ~185 mL sample identified as FPP-3 from a F-Area pump pit sump to SRNL for analysis. The sample was pale yellow in color and contained a small amount of suspended solids visually estimated to be less than 1% by volume. SRNL analysis indicated that the sample contained 4.4 E+05 dpm/mL Cs-137, 6.2 E+05 dpm/mL total beta activity, 9.3 E+02 dpm/mL beta activity following cesium removal, and below detectable levels of alpha activity following cesium removal. In addition, the sample contained 0.015 M free OH- and 947 μg total organic carbon/mL.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Field Test to Evaluate Deep Borehole Disposal.

The U.S. Department of Energy (DOE) has embarked on the Deep Borehole Field Test (DBFT), which will investigate whether conditions suitable for disposal of radioactive waste can be found at a depth of up to 5 km in the earth’s crust. As planned, the DBFT will demonstrate drilling and construction of two boreholes, one for initial scientific characterization, and the other at a larger diameter such as could be appropriate for waste disposal (the DBFT will not involve radioactive waste). A wide range of geoscience activities is planned for the Characterization Borehole, and an engineering demonstration of test package emplacement and retrieval is planned for the larger Field Test Borehole. Characterization activities will focus on measurements and samples that are important for evaluating the long-term isolation capability of the Deep Borehole Disposal (DBD) concept. Engineering demonstration activities will focus on providing data to evaluate the concept’s operational safety and practicality. Procurement of a scientifically acceptable DBFT site and a site management contractor is now underway. The concept of deep borehole disposal (DBD) for radioactive wastes is not new. It was considered by the National Academy of Science (NAS 1957) for liquid waste, studied in the 1980’s in the U.S. (Woodward–Clyde 1983), and has been evaluated by European waste disposal R&D programs in the past few decades (for example, Grundfelt and Crawford 2014; Grundfelt 2010). Deep injection of wastewater including hazardous wastes is ongoing in the U.S. and regulated by the Environmental Protection Agency (EPA 2001). The DBFT is being conducted with a view to use the DBD concept for future disposal of smaller-quantity, DOE-managed wastes from nuclear weapons production (i.e., Cs/Sr capsules and granular solid wastes). However, the concept may also have broader applicability for nations that have a need to dispose of limited amounts of spent fuel from nuclear power reactors. For such nations the cost for disposing of volumetrically limited waste streams could be lower than mined geologic repositories.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

AEGIS: A MULTIWAVELENGTH STUDY OF SPITZER POWER-LAW GALAXIES

This paper analyzes a sample of 489 Spitzer/Infrared Array Camera (IRAC) sources in the Extended Groth Strip (EGS), whose spectral energy distributions fit a red power law (PL) from 3.6 to 8.0 {mu}m. The median redshift for sources with known redshifts is (z) = 1.6. Though all or nearly all of the sample galaxies are likely to be active galactic nuclei (AGNs), only 33% were detected in the EGS X-ray survey (AEGIS-X) using 200 ks Chandra observations. The detected sources are X-ray luminous with L {sub X}>10{sup 43} erg s{sup -1} and moderately to heavily obscured with N {sub H}>10{sup 22} cm{sup -2}. Stacking the X-ray-undetected sample members yields a statistically significant X-ray signal, suggesting that they are on average more distant or more obscured than sources with X-ray detections. The ratio of X-ray to mid-infrared fluxes suggests that a substantial fraction of the sources undetected in X-rays are obscured at the Compton-thick level, in contrast to the X-ray-detected sources, all of which appear to be Compton thin. For the X-ray-detected PL sources with redshifts, an X-ray luminosity L {sub X} {approx} 10{sup 44} erg s{sup -1} marks a transition between low-luminosity, blue sources dominated by the host galaxy to high-luminosity, red PL sources dominated by nuclear activity. X-ray-to-optical ratios, infrared variability, and 24 {mu}m properties of the sample are consistent with the identification of infrared PL sources as active nuclei, but a rough estimate is that only 22% of AGNs are selected by the PL criteria. Comparison of the PL selection technique and various IRAC color criteria for identifying AGNs confirms that high-redshift samples selected via simple IRAC colors may be heavily contaminated by starlight-dominated objects.

79 ASTRONOMY AND ASTROPHYSICS↗

Acido-basicity of lanthana/alumina catalysts and their activity in ethanol conversion

Lanthana on alumina samples (0.2, 0.8 and 4.7 theoretical monolayers) were prepared by incipient wetness impregnation using γ-Al 2 O 3 as support. Characterization has been performed by BET, XRD, skeletal FT-IR, DR-UVvis, XPS, HR-TEM, IR spectra of the surface OH, adsorbed pyridine and CO 2 , and isopropanol TPD. Here ethanol conversion was investigated both in temperature-programmed surface reaction (TPSR) dynamic conditions as well as in steady-state flow reactor tests. Lanthanum addition stabilizes alumina with respect to sintering and loss of surface area and La- containing phases are observed only for the high-La loaded catalyst. La-alumina catalysts are less active in ethanol dehydration than alumina but more selective to diethyl ether at partial conversion. 5%La 2 O 3 /Al 2 O 3 is also equally or more selective than alumina to ethylene at high conversion, producing less carbonaceous material during reaction. Thus, this catalytic system might be a good candidate for (bio)ethylene production through (bio)ethanol dehydration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparison of the photocatalytic activity of six tunneled titanates

The photocatalytic behavior of six tunneled titanates—Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10}, Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, K{sub 1}Ga{sub 17}Ti{sub 15}O{sub 56}, K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16}, and BaTi{sub 4}O{sub 9}—was investigated using methylene blue as an indicator and a xenon arc lamp as the radiation source. Powders prepared by solid state reaction had surface areas ranging from 0.40 to 1.58 m{sup 2}/g and particle sizes ranging from 1 to 25 μm. Bandgaps, as measured from diffuse reflectance data, ranged from 2.84 to 4.15 eV. Two of the tunneled titanates—Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—exhibited negligible photocatalytic activity. The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other, exhibiting apparent first-order reaction rates of 0.275 to 0.31 h{sup −1} using 100 mg of powder in 125 ml of 20 μM methylene blue at room temperature. The BaTi{sub 4}O{sub 9} sample exhibited the highest photocatalytic activity with an apparent first-order reaction rate of 0.53 h{sup −1} under the same conditions. The addition of a RuO{sub 2} co-catalyst improved the photocatalytic activity of Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}, decreased the activity of BaTi{sub 4}O{sub 9}, and had little effect on the activity of the other powders. A comparison of the structural features in the six materials shows that photocatalytic activity is strongly related to the density of TiO{sub 6} octahedra in the different crystal structures. Among the gallium-containing tunneled titanates, photocatalytic activity increased with decreasing band gap. - Graphical abstract: Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8}—One of the tunneled titanates investigated. Highlights: ► The photocatalytic activity of six tunneled titanates was compared. ► Na{sub 0.8}Ga{sub 4.8}Ti{sub 1.2}O{sub 10} and Na{sub 0.7}Ga{sub 4.7}Ti{sub 0.3}O{sub 8} exhibited negligible photocatalytic activity. ► The activities of Na{sub 0.8}Ga{sub 4.8}Ti{sub 2.2}O{sub 12}, KGa{sub 17}Ti{sub 15}O{sub 56}, and K{sub 1.5}Ga{sub 1.5}Ti{sub 6.5}O{sub 16} were similar to each other. ► BaTi{sub 4}O{sub 9} exhibited the highest photocatalytic activity. ► Photocatalytic activity is related to the density of TiO{sub 6} octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasi-In-Situ Analysis of Electrode Top Atomic Layers via High-Sensitivity Low-Energy Ion Scattering and Potential-Controlled Sample Transfer

Electrocatalytic reactions involve interfacial interactions between the surfaces of electrodes and reactive species at an electrolyte interface. There are presently no universal or unambiguous methods to directly assay the active top atomic layer composition that influences the reactivity of these electrodes under relevant operating conditions. Low-energy ion scattering (LEIS) spectroscopy is a surface characterization technique that yields compositional analysis of the outermost atomic layer of a material, but it must be performed in ultrahigh vacuum (UHV). Application of LEIS measurements to electrochemical materials that are removed from ambient liquid-phase environments thus leaves an open question as to whether the surface that is transferred to UHV is truly the surface that manifested during the electrochemical reaction. Toward the goal of preserving the active surface state, we developed a sample transfer workflow for LEIS enabling air-free removal and drying of an electrode from an electrochemical cell while maintaining control of the potential using an auxiliary electrode. The potential-controlled emersion method was demonstrated to give distinct potential-dependent surface compositions for a Cu−Pd alloy relative to removal after uncontrolled return to open-circuit potential. A Cu-enriched surface was found at anodic potential and a Pd-enriched surface at cathodic potential, suggesting that the approach can be used to retain representative atomic configurations during transfer. Since adsorbates will often persist from the reaction environment, conventional sample pretreatment methods for removal, including atomic O and atomic H exposure, were also contrasted. Both methods were found to differ with results from incidental low-dose depth profiling by the LEIS primary ion source, which removes adventitious species and surface atoms during the course of repeated measurements. These depth profiles were found to be sensitive to sample history and thus qualitatively informative, despite the possible changes induced by ion damage. The results exhibit (i) the need for complete control over the polarization state of the sample at all times (no excursions to open circuit during transfer) and (ii) the utility of low-dose depth profiling to capture changes in the near-surface composition.

Alloys↗

1-Dodecane-sulfonic-acid-sodium-salt(LAS) assisted hydrothermal synthesis of Cd{sub x}Zn{sub 1-x}S solid solution as efficient photocatalysts under visible light irradiation

With anionic surfactant LAS assisted, series of zinc cadmium sulfide semiconductor photocatalysts were synthesized by hydrothermal method. These products were characterized by X-ray diffraction (XRD), UV-Vis absorption spectra (UV-Vis) and scanning electron microscopy (FESEM). The photocatalytic activities of as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible-light irradiation. The best synthesis parameters are: Composition 0.9:0.1 (Cd:Zn molar ratio), Temperature 160 deg. C, Hydrothermal Time 48 Hour, LAS Concentration 1.7 mmol/L, the maximum visible-light-catalytic hydrogen production rate is 161.25 {mu}mol/h (lambda>430 nm) which is higher than those of by coprecipitation method. The experiment results indicate that surfactant assisted hydrothermal method is an effective way to get highly active CdZnS solid solution photocatalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Distinguishing Indigenous from Contaminating Microorganisms in Rock Samples from a Deep Au Mine in South Africa

The concentration and distribution of microbial biomass within deep subsurface rock strata is not well known To date, most analyses are from water samples and a few cores. Hand samples, block samples and cores from an actively mined Carbon Leader ore zone at 3.2 kilometers depth were collected for microbial analyses. The Carbon Leader was comprised of quartz, S-bearing aromatic hydrocarbons, Fe(III) oxyhydroxides, sulfides, uraninite, Au and minor amounts of sulfate. The porosity of the ore was 1% and the maximum pore throat diameter was less than 0.1 microns; whereas, the porosity of the adjacent quartzite was .02 to .9% with a maximum pore throat diameter of 0.9 microns. Rhodamine dye, fluorescent microspheres, microbial enrichments, autoradiography, phospholipid fatty acid (PLEA) and 16S rDNA analyses were performed on these rock samples and the mining water. The date indicate that the levels of solute contamination less than 0.01% for pared rock samples. Despite this low level of contamination, PLEA, microbial enrichment, DNA and tracer analyses and calculations indicate that most of the viable microorganisms in the Carbon Leader represent gram negative aerobic heterotrophs and ammonia oxidizers that are phylogenetically identical or closely related to service water microorganisms. These microbial contaminants probably infiltrated the low permeability rock through mining-induced microfractures. Geochemical data also detected drilling water in a fault zone approx. 1 meter behind the rock face encountered during coring. The mining induced macrofractures that are common at these great depths act as pathways for the drilling water borne microorganisms into the lower temperature zone that extends several meters into rock strata from the rock face. Combined PLEA and T- RFLP analyses of the service water and Carbon Leader samples indicate that the concentration of indigenous microorganisms was less than 10(exp 2) cells/gram. Such a low concentrations result from the submicron pore throat diameters. PLFA. SO4-35 autoradiography and tracer analyses indicate that the bounding quartzite contains thermophilic sulfate reducing bacteria at 10(exp 3) cells/gram that are not attributable to drilling water contamination. The microorganisms may be surviving on sulfate generated by oxidation of sulfide by radiolytic reactions resulting from the high U concentration in the ore zone. The presence of up to 8,000 ppm of Fe(III) oxyhydroxides in the host rock will also act to recycle sulfide generated by the sulfate reducing bacteria into sulfate. The activity of these sulfate-reducing bacteria may be enhanced by mining induced fracturing which can propagate up to 40 meters into virgin rock where the temperatures are ca. 50 C, and decrepitate of sulfate rich fluid inclusions. In ultra deep mines, judicious application of tracers and multiple microbial characterization techniques can distinguish microbial contamination caused by the near field fracturing and drilling water migration from the indigenous microbial communities in rock strata. The importance of far field fracturing on indigenous microbial communities, however, remains unknown.

Onstott, T. C.↗

On the electrical and optical properties of oxide nanolayers produced by the thermal oxidation of metal tin

Thin SnO{sub 2–x} layers, 30 nm in thickness, are produced by the thermal oxidation of metal tin nanolayers at a temperature of 450–750°C. The electrical and optical properties of the layers are studied. During the thermal oxidation of tin nanolayers, an unsteady variation in their conductivity is observed. For the oxide films produced at 450 and 550°C, an absorption band at 340 nm (3.65 eV) is detected in the optical spectra. The conductivity-activation energy is determined for samples oxidized to different degrees. On the basis of experimental data and the data reported in publications, an oxidation mechanism controlling the properties of Sn nanolayers is proposed.

36 MATERIALS SCIENCE↗

Electrospun nanofibers of Er{sup 3+}-doped TiO{sub 2} with photocatalytic activity beyond the absorption edge

Er{sup 3+}-doped TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning and characterized by X-ray diffraction, scanning electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy and photocurrent measurement. Photocatalytic activities of the as-prepared samples were evaluated by the decolorization of methyl orange aqueous solution under simulated solar light irradiation. The results indicated that the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers was much higher than that of the undoped one, and the optimal dosage of Er{sup 3+} at 1 mol% achieved the highest degradation rate. Moreover, the photocatalytic activity of Er{sup 3+}-doped TiO{sub 2} nanofibers under the irradiation of light with the wavelength beyond the absorption edge of TiO{sub 2} was explored by the decolorization of a dye, rhodamine B and the photodegradation of a typical colorless pollutant, phenol. The results further revealed the mechanism of the enhanced photocatalytic activity through Er{sup 3+} doping in TiO{sub 2} nanofibers. - Graphical abstract: Display Omitted - Highlights: ●Er{sup 3+}:TiO{sub 2} nanofibers with different Er{sup 3+} contents were prepared via electrospinning. ●The photocatalytic activity of Er{sup 3+}:TiO{sub 2} was much higher than that of undoped one. ●Er{sup 3+}:TiO{sub 2} could be activated by the light with wavelength beyond the absorption edge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The relevance of particle flux monitors in accelerator-based activation analysis

One of the most critical parameters in activation analysis is the flux density of the activating radiation, its spatial distribution in particular. The validity of the basic equation for calculating the activity induced to the exposed item depends upon the fulfilment of several conditions, the most relevant of them being equal doses of incident activating radiation received by the unknown sample, the calibration material and the reference material, respectively. This requirement is most problematic if accelerator-produced radiation is used for activation. Whilst nuclear research reactors usually are equipped with exposure positions that provide fairly homogenous activation fields for thermal neutron activation analysis accelerator-generated particle beams (neutrons, photons, charged particles) usually exhibit axial and, in particular, sharp radial flux gradients. Different experimental procedures have been developed to fulfil the condition mentioned above. In this paper, three variants of the application of flux monitors in photon activation analysis are discussed (external monitor, additive and inherent internal monitor). Experiments have indicated that the latter technique yields highest quality of the analytical results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expansion of the nickel electrode

To observe a reasonable amount of expansion, months or years in acutal batteries are required. Therefore, the technique of electrode bending was developed. Active material is taken off a sample electrode on one side, and left only on the other side with a cadmium counter electrode. With this configuration, if the active material expands, the electrode will bend convex - concave towards this direction. This very small bending may be easily detected with light deflection. A laser beam was used to project it on the screen through a mirror attached on the electrode, thus making a very sensitive measurement of a very small expansion.

Lim, H. S.↗

Catalysis of carbon monoxide methanation by deep sea manganate minerals

The catalytic activity of deep sea manganese nodule minerals for the methanation of carbon monoxide was measured with a microcatalytic technique between 200 and 460 degrees C. The manganate minerals were activated at 248 degrees C by immersion into a stream of hydrogen in which pulses of carbon monoxide were injected. Activation energies for the methanation reaction and hydrogen desorption from the manganate minerals were obtained and compared with those of pure nickel. Similar energy values indicate that the activity of the nodule materials for the reaction appears to be related to the amount of reducible transition metals present in the samples (ca. 11 wt.-%). Since the activity of the nodule minerals per gram is comparable to that of pure nickel, most of the transition metal ions located between manganese oxide layers appear to be exposed and available to catalyze the reaction.

Non-NASA Center↗

A CONNECTION BETWEEN APPARENT VLBA JET SPEEDS AND INITIAL ACTIVE GALACTIC NUCLEUS DETECTIONS MADE BY THE FERMI GAMMA-RAY OBSERVATORY

In its first three months of operations, the Fermi Gamma-Ray Observatory has detected approximately one quarter of the radio-flux-limited MOJAVE sample of bright flat-spectrum active galactic nuclei (AGNs) at energies above 100 MeV. We have investigated the apparent parsec-scale jet speeds of 26 MOJAVE AGNs measured by the Very Long Baseline Array (VLBA) that are in the LAT bright AGN sample (LBAS). We find that the {gamma}-ray bright quasars have faster jets on average than the non-LBAS quasars, with a median of 15c, and values ranging up to 34c. The LBAS AGNs in which the LAT has detected significant {gamma}-ray flux variability generally have faster jets than the nonvariable ones. These findings are in overall agreement with earlier results based on nonuniform EGRET data which suggested that {gamma}-ray bright AGNs have preferentially higher Doppler boosting factors than other blazar jets. However, the relatively low LAT detection rates for the full MOJAVE sample (24%) and previously known MOJAVE EGRET-detected blazars (43%) imply that Doppler boosting is not the sole factor that determines whether a particular AGN is bright at {gamma}-ray energies. The slower apparent jet speeds of LBAS BL Lac objects and their higher overall LAT detection rate as compared to quasars suggest that the former are being detected by Fermi because of their higher intrinsic (unbeamed) {gamma}-ray to radio luminosity ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

Nucleation and crystallization behaviors of nano-crystalline lithium–mica glass–ceramic prepared via sol–gel method

Graphical abstract: The effects of nucleation and crystallization treatments on nano-crystalline lithium–mica glass–ceramic, synthesized by sol–gel technique, were investigated. It was found that MgF{sub 2} crystals act as nuclei centers for the mica crystallization so that a large quantity of mica crystallites was obtained following nucleation process. The crystallization activation energy for both the un-nucleated and nucleated samples was measured as 400.2 and 229.6 kJ mol{sup −1}, respectively. The calculated Avrami exponents demonstrated that the growth mechanism of mica crystallites changes from the needle-like to three-dimensional growth with applying the appropriate nucleation treatment ▪. Highlights: ► Crystallization temperature shifts to 625 from 680 °C following nucleation process. ► Activation energy of crystallization for the nucleated specimen is 229.6 kJ mol{sup −1}. ► Crystallization activation energy for the un-nucleated specimen is 400.2 kJ mol{sup −1}. ► Needle-like growth is predominant growth mechanism for un-nucleated sample. ► Three-dimensional growth is predominant growth mechanism for nucleated sample. -- Abstract: The paper investigates the effects of nucleation and crystallization treatments on nano-crystalline lithium–mica glass–ceramics, taking the composition LiMg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6x}F{sub 2} (x = 0.5) and 8 mass% MgF{sub 2} synthesized by sol–gel technique. Here, X-ray diffraction, thermal analysis and transmission electron microscopy were used to assess the structural evolutions of as-synthesized nano-crystalline lithium–mica glass–ceramics. It was found that MgF{sub 2} crystals perform as nuclei centers for the mica crystallization hence; a large quantity of mica crystallites obtained following the nucleation process at 400 °C for 12 h. For both the un-nucleated and nucleated samples, the crystallization activation energy was measured as 400.2 and 229.6 kJ mol{sup −1}, respectively. Consequently, the calculated Avrami exponents demonstrated that the growth mechanism of mica crystallites, while applying appropriate nucleation treatment, changes from needle-like to three-dimensional growth.

36 MATERIALS SCIENCE↗

Operational Workflow in a Sample Receiving Facility: Input from the MSR Operation Definition Team

The return of scientifically selected samples from Mars would provide a rare opportunity for investigation with the full range of the latest technology available. To take full advantage of this opportunity, it is important to plan ahead to ensure the pristine nature of the samples upon arrival within the Earth environment until scientific investigations can begin. The NASA/ESA science community-driven MSR Science Planning Group – Phase 2 (MSPG2) delivered recommendations and guidance regarding curation (1) and science (2,3) activities to be performed on the samples under containment. High-level requirements for the infrastructure were also developed by MSPG2 (4). In order to prepare infrastructure-targeted input for the ESA and NASA facility studies planned in the 2022-2023 timeframe, the MSR agency-led Operational Scenarios Definition Team (MOSDT) was assembled to conceptualize the sample operations that will inform future architecture teams. Emphasis was placed on the responsibility of MOSDT to use community-defined requirements and to represent the view of the international scientific community. The main deliverable of MOSDT was an operational workflow for a Sample Receiving Facility (SRF). Two other deliverables were produced: a report to narrate the workflow, and a list of instruments (see Hutzler et al., this conference). Activities described in the main sequence of the workflow range from engineering operations to curation to science, with the latter term being used here as the science to be done within a SRF. Side sequences (e.g. engineering inspection of hardware, head gas extraction) were also identified, and detailed when they would have a significant impact on the infrastructure of a SRF. It was necessary for the MOSDT to rely on assumptions for some steps and activities, and though these were kept to a minimum (and are described in both the report supporting the workflow and in the full presentation), in general, the assumptions and overall work were very conservative, as the impact of underestimating the scope of the SRF infrastructure was considered more detrimental than overestimating it. It is expected that future work will be able to confirm or inform these assumptions. The community was consulted during the course of the MOSDT work. This abstract’s aim is two-fold: on one hand, inform the scientific community and overall MSR stakeholders, to make the infrastructure studies and trade-off more understandable; on the other hand, to solicit feedback from a larger community audience for the next iterations planning for SRF design and activities.

Mars Sample Return↗