Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Dielectrical properties of PANI/TiO{sub 2} nanocomposites

Conducting polyaniline/titanium dioxide (PANI/TiO{sub 2}) composites have been succesfully synthesized by insitu polymerization technique. The PANI/TiO{sub 2} nanocomposites of different compositions were prepared by varying weight percentage of TiO{sub 2} nanoparticles such as 10 wt%, 20 wt%, 30 wt%, 40 wt% and 50 wt% into the fixed amount of the aniline monomer. The prepared powder samples were characterized by X-ray diffractometer (XRD) and Scanning electron microscope (SEM). The intensity of diffraction peaks for PANI/TiO{sub 2} composites is lower than that for TiO{sub 2}. SEM pictures show that the nanocomposite were prepared in the form of long PANi chains decorated with TiO{sub 2} nanoparticles. The dielectric properties and AC conductivity were studied in the frequency range1K Hz–10M Hz. At higher frequencies, the composites exhibit almost zero dielectric loss and maximum value of σ{sub ac} is found for a concentration of 20 wt% TiO{sub 2} in polyaniline. The interface between polyaniline and TiO{sub 2} plays an important role in yielding a large dielectric constant in nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hot-compress: A new postdeposition treatment for ZnO-based flexible dye-sensitized solar cells

Highlights: • A new postdeposition treatment named hot-compress is introduced. • Hot-compression gives homogeneous compact layer ZnO photoanode. • I-V and EIS analysis data confirms the efficacy of this method. • Charge transport resistance was reduced by the application of hot-compression. - Abstract: This article introduces a new postdeposition treatment named hot-compress for flexible zinc oxide–base dye-sensitized solar cells. This postdeposition treatment includes the application of compression pressure at an elevated temperature. The optimum compression pressure of 130 Ma at an optimum compression temperature of 70 °C heating gives better photovoltaic performance compared to the conventional cells. The aptness of this method was confirmed by investigating scanning electron microscopy image, X-ray diffraction, current-voltage and electrochemical impedance spectroscopy analysis of the prepared cells. Proper heating during compression lowers the charge transport resistance, longer the electron lifetime of the device. As a result, the overall power conversion efficiency of the device was improved about 45% compared to the conventional room temperature compressed cell.

36 MATERIALS SCIENCE↗

A comprehensive study on the fabrication and characterization of Ti–48Al–2Cr–2Nb preforms manufactured using electron beam melting

This feasibility study examines the additive manufacturing of Ti–48Al–2Cr–2Nb preforms in a quest to make more complex engine components from this promising but hard to machine, brittle material. The preforms are built using the electron beam melting technique; hot isostatic pressing (HIP) was performed as the only post-process. Microstructural characterizations were carried with scanning electron microscopy techniques, X-ray diffraction and X-ray computed tomography while mechanical properties were obtained via tensile testing. We exploited computational thermodynamic modeling (widely known as CALPHAD) approach to investigate the phase stability pertinent to Nb and Cr modified TiAl. Defect-free structures were obtained in the HIPed condition with mechanical behavior comparable to/better than traditionally manufactured counterparts. Equiaxed duplex microstructures were achieved in the as-built condition that were sustained post-HIP. The effect of the build conditions and phase transformation kinetics on the observed microstructures is discussed. Furthermore, the microstructure-mechanical behavior relationship is also discussed.

36 MATERIALS SCIENCE↗

Experimental and theoretical spectroscopic studies of branchlet-like SrCO{sub 3} superarchitecture

Novel SrCO{sub 3} superarchitecture was prepared by a simple and inexpensive wet chemical method at room temperature has been investigated. The SrCO{sub 3} super architecture is in branchlet-like morphology with diameter of 1 µm and composed of numerous well-aligned nanorods of 52 nm in diameter. It was found that the morphology of the product strongly dependent on the experimental parameters, such as the concentration of aqueous NaOH solution and the reaction temperature. The synthesized nanostructure has been characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), FT-IR and Raman spectroscopies. The vibrational frequencies of the fundamental modes of the compound have been precisely assigned and theoretical results were compared with the experimental vibrations. Theoretical information of the vibrational frequencies (FT-IR and Raman) was obtained by means of Density functional theory (DFT) calculations using DGDZVP basis set. HOMO-LUMO energy gap has been calculated. The Molecular Electrostatic Potential (MEP) analysis reveals the sites for electrophilic attack and nucleophilic reactions in the molecule.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Laser-Welded Ti Alloy and Stainless Steel Joint Using Cu Interlayer

In this study, Cu was used as an interlayer to restrain the formation of brittle Ti-Fe intermetallics when joining Ti alloy to SS. Microstructures of the joint were analyzed using optical microscopy, scanning electron microscopy and x-ray diffraction. Besides, the tensile strength of the joint was also measured. The melting amount of base materials was controlled by changing thickness of Cu interlayer to control the melting proportion in weld. The melting amount of base materials in weld decreased with the thickness of Cu interlayer. The content of Cu solid solution in weld increased with the thickness of Cu interlayer. Ti-Cu compound layer was formed on the Ti alloy side. The width of the Ti-Cu compound layer increased with the increase in heat input. The tensile strength of joint was largely impacted by Ti-Cu compound layer. The tensile strength of joint first increased and then decreased with the increase in width of the Ti-Cu compound layer.

36 MATERIALS SCIENCE↗

Observation of lower defect density in CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} solar cells by admittance spectroscopy

The introduction of Cl into CH{sub 3}NH{sub 3}PbI{sub 3} precursors is reported to enhance the performance of CH{sub 3}NH{sub 3}PbI{sub 3} solar cell, which is attributed to the significantly increased diffusion lengths of carriers in CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} solar cell. It has been assumed but never experimentally approved that the defect density in CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} solar cell should be reduced according to the higher carrier lifetime observed from photoluminescence (PL) measurement. We have fabricated CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} solar cell by adding a small amount of Cl source into CH{sub 3}NH{sub 3}PbI{sub 3} precursor. The performance of CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} solar cell is significantly improved from 15.39% to 18.60%. Results from scanning electron microscopy and X-ray diffraction indicate that the morphologies and crystal structures of CH{sub 3}NH{sub 3}PbI{sub 3} and CH{sub 3}NH{sub 3}Pb(I,Cl){sub 3} thin films remain unchanged. Open circuit voltage decay and admittance spectroscopy characterization jointly approve that Cl plays an extremely important role in suppressing the formation of defects in perovskite solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructural and Textural Evolutions during β → α/ω Transformation in Biomedical Ti-15Mo Alloy and Its Effects on Mechanical Performance

This study investigated the precipitation behaviors and mechanical performance of Ti-15Mo alloy subjected to different treatment conditions. The microstructures were analyzed via scanning electron microscopy and transmission electron microscopy. The tensile properties and resultant fracture surfaces were investigated to determine the relationship between the phase transformation and mechanical performance. The Ti-15Mo alloy had a notable elongation due to no observable precipitation during solution treatment plus quenching (STQ). A high ultimate tensile strength (UTS) was obtained with a considerable amount of ω precipitates transformed during air cooling after solution treatment (ST). The coarse precipitates and additional precipitation free zones in the Ti-15Mo alloy treated with furnace cooling (FC) after ST induced a decrease in UTS. Furthermore, the absence of a continuous grain boundary α phase resulted in a lower strength in the specimen annealed at 600 °C after hot rolling. The alloy iso-aged after STQ exhibited good tensile properties with a UTS of 920 MPa and an elongation of 15%. The texture and variant relationship of the precipitates was analyzed with x-ray diffraction and electron backscatter diffraction. The common variants of the β matrix influenced the nucleation of precipitates in the Ti-15Mo alloy annealed after hot rolling, and the precipitates showed an obvious {01-10}α main texture. The variant selection of α precipitates at the grain boundary was caused by the two adjacent β grains in the alloy treated by FC after ST.

36 MATERIALS SCIENCE↗

Influence of compositional variation on electrical properties of PANI/SnO{sub 2} nanocomposites

Conducting polyaniline/tin oxide (PANI/SnO{sub 2}) nanocomposites have been successfully synthesized by in-situ polymerization technique. The PANI/SnO{sub 2} nanocomposites of different compositions were prepared by varying weight percentage of SnO{sub 2} nanoparticles such as 10 wt%, 20 wt%, 30 wt%, 40 wt% and 50 wt% into the fixed amount of the aniline monomer. The prepared powder samples were characterized by X-ray diffractometer (XRD), Fourier Transform Infrared spectroscopy (FT-IR) and Scanning electron microscope (SEM). The intensity of diffraction peaks for PANI/SnO{sub 2} composites is increases with increasing SnO{sub 2} wt%. SEM observation showed that the prepared SnO{sub 2} nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer nanocomposite material. AC electrical conductivity and dielectric properties were studied in the frequency range of 1 KHz -1 MHz. At higher frequencies, the composites exhibit almost zero dielectric loss and maximum value of AC electrical conductivity (σ{sub ac}) of 0.21 S/m is found for a concentration of 30 wt% of SnO{sub 2} in polyaniline.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A New Photocatalyst Bismuth Oxo Citrate: Synthesis, Characterization, and Photocatalytic Performance

A new photocatalyst bismuth oxo citrate was synthesized by facile precipitation process with calcination at 200 8C. The photocatalyst was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fouriertransform infrared (FTIR) spectroscopy, N2 sorptometry, and elemental analysis. Morphologically, it is composed of polyhedral particles with different, irregular shapes and sizes. The specific surface area (SSA) of the photocatalyst was 8.92 m2 g-1. It showed very good photocatalytic performance and reusability. Total decolorization of Reactive Blue 19 (RB19) was achieved in less than 10 minutes, which is much faster in comparison with TiO{sub 2} P25. Also, bismuth oxo citrate showed higher photocatalytic activity than other photocatalysts based on bismuth compounds reported by other authors. Optimal photocatalysis parameters were pH 2 and photocatalyst dose of 250 mg dm-3. The decolorization rate was found to decrease as initial dye concentration increased. The photocatalytic data best fitted to L-H kinetic model with pseudo-first order reaction rate. Chrastil diffusion model showed that diffusion has not influence on the process. Water Environ. Res., 90, 719 (2018). © 2018 Water Environment Federation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the oxide film on 308L weld surface produced during welding process

Highlights: • Double layer film formed under welding of no shielding was first deeply studied. • Micro-cracks and nano-scale gaps were found in outer and inner layer. • Outer layer was composed of Fe{sub 2}O{sub 3}, inner layer included Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4.} • Cr deficiency of film related to the volatilization of CrO{sub 3} over 1000 °C. • Oxidation rule of 308L weld during GTAW was found based on thermodynamics. The oxide film formed during welding on the inner surface of 308L weld was investigated. The morphology, composition and structure of the oxide film were characterized by optical microscopy, scanning electron microscopy, laser Raman spectroscopy, X-ray diffraction, Auger electron spectroscopy and transmission electron microscopy. The results indicated that the oxidation degree of the weld metal was generally uniform from the weld center to the fusion line. Micro-scale cracks were found on the outer surface of the oxide film and nano-scale gaps scattered on the inner oxide film-weld interface. The oxide film exhibited a duplex structure including outer and inner layers. The outer layer, made of tightly bound particles, was mainly composed of Fe{sub 2}O{sub 3} oxide particles with a diameter of 50–150 nm. And the inner layer, made of relative loosely bound particles, was mainly composed of Fe{sub 3}O{sub 4} and FeCr{sub 2}O{sub 4} oxide particles with a diameter of 10–50 nm. The corresponding oxidation behavior and mechanism of the oxide film were also discussed.

36 MATERIALS SCIENCE↗

Microstructure and oxidation behavior of high strength steel AISI 410 implanted with nitrogen ion

Surface treatment by implantation with nitrogen-ion was performed on the commercial feritic high strength steel AISI 410 which is termed for high temperature applications. The aim of this research was focused on the surface modification to improve its high temperature oxidation property in the early stages. Ion implantation was carried out at acceleration energy of 100 KeV and ion current 10 mA for 30, 60 and 90 minutes. The samples were subjected to the high temperature oxidation test by means of thermogravimetry in a magnetic suspension balance (MSB) at 500 °C for 5 hours. The scanning electron microscopy (SEM), X-ray diffraction spectrometry (XRD) and Vickers Hardness measurement were used for sample characterization. The formation of ferro-nitride phase after implantation did not occur, however a thin layer considered to contain nitrogen interstitials was detected. The oxidation of both samples before and after implantation followed parabolic kinetics indicating inward growth of oxide scale characteristically due to diffusion of oxygen anions towards matrix surface. After oxidation test relativelly stable oxide scales were observed. Oxidation rates decreased proportionally with the increasing of implantation time due to the formation of oxide layer which is considered to be effectiv inhibitor for the oxygen diffusion.

36 MATERIALS SCIENCE↗

Effects of Nd, Er Doping on the Structure and Magnetic Properties of YFeO{sub 3}

Nd, Er co-doped YFeO{sub 3} compounds were synthesized by sol-gel method. The prepared compounds were characterized by powder x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive x-ray (EDX), and vibrating sample magnetometer (VSM) integrated in a physical property measurement system (PPMS-9), respectively. The results show that the compounds possess orthorhombic perovskite structure. The Y{sub 0.5}Er{sub 0.1}Nd{sub 0.4}FeO{sub 3} compound mainly consists of five elements (Er, Nd, Y, Fe, and O) and atom ratio matched well with the formula. With the increase of Nd{sup 3+} doping content in Y{sub 0.5}Er{sub 0.5−x}Nd{sub x}FeO{sub 3} (x = 0, 0.1, 0.2, 0.3, and 0.4), the coercivity increases gradually while the saturation magnetization and remanent magnetization decrease at the same time. Introducing Nd{sup 3+} and Er{sup 3+} ions into YFeO{sub 3} will make a change on a structure distortion, resulting in the decrease of the Fe–O–Fe angle and the consequent reduction of superexchange effect. From our research results, the relationship between the r (R{sup 3+}) and the superexchange bond angle is different from pure-phase orthoferrites R FeO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AFe{sub 2}O{sub 4}/(Pb{sub 0.80}Sr{sub 0.20})TiO{sub 3} (A = Mn, Ni and Co): a New Room-Temperature Magnetoelectric Multiferroic Bi-layered Composite Films

The room temperature and magnetic field-dependent dielectric, impedance and magnetoelectric (ME) coupling effect of polycrystalline AFe{sub 2}O{sub 4}/(Pb{sub 0.80}Sr{sub 0.20})TiO{sub 3} (A = Mn, Ni and Co) bi-layered composite films have been investigated. The structural and microstructural analyses using the X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) reveal the presence of homogenous growth of both tetragonal and spinel phases without any extra phase and diffusion in the AFO/PST20 bi-layered composite films. Our results show that all composite films exhibit ferroelectric as well as considerable magnetic, indicating magnetoelectric coupling effect. Our results show that the dielectric and impedance properties of AFO/PST20 bi-layered composite films can be manipulated by the magnetic field at room temperature, also indicating the existence of magnetoelectric coupling. The impedance (Z{sup ′} and Z{sup ″}) Nyquist plots show distinct electrical responses with the magnetic field. The maximum magnetoelectric coefficient (α) is found to be α{sub ME}∼ 239 and ∼ 195 mV/cm/Oe for the MFO/PST20 and CFO/PST20 bi-layered composite films, respectively. The above results show that the AFO/PST20 bi-layered composite films are room-temperature multiferroic material that can be potentially used in magnetoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water-dispersible and quasi-superparamagnetic magnetite nanoparticles prepared in a weakly basic solution at the low synthetic temperature

Highlights: • Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature. • The double layer may be steadily formed on the surfaces of magnetite nanoparticles at the high pH value. • Magnetite nanoparticles present a quasi-superparamagnetic property and a good dispersion in the aqueous solution. - Abstract: Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method. As a comparison, the oxidative precipitation method was also applied in this study. The structure, morphology, and other properties of the obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The above characterization data indicate that small size and narrow size distribution are found for magnetite nanoparticles prepared by the co-precipitation method. Further magnetic property and Zeta potential results illuminate that magnetite nanoparticles prepared by this method display a quasi-superparamagnetic property and a good dispersion in the aqueous solution. Based on the investigation results, the magnetite nanoparticles with a quasi-superparamagnetic property and a fine dispersion can be facilely prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Porous Microcapsule-Based Regenerating Superhydrophobic Coating on 304L SS and Its Corrosion Properties

We report fabrication of a regenerating superhydrophobic coating on 304L stainless steels, with superior corrosion resistance, using porous microcapsules made of calcium hydroxide as a core and a polymeric shell consisting of ethyl cellulose and poly methyl methacrylate. The synthesized microcapsules are characterized using optical, atomic force and scanning electron microscopic techniques, x-ray diffraction, Fourier transform infrared spectroscopy and immersion tests. The diameter of porous and permeable microcapsules ranges from 2 to 20 μm. On immersion of the coated surface in sodium stearate solution, the calcium hydroxide from the core diffuses through the pores of microcapsules and forms nanocrystalline hydrophobic calcium stearate needles pointing outward that repel water molecules. The maximum water contact angle obtained was 155.7° ± 2.05°. The micro-nanoscale roughness of the surface was evident from the AFM measurement. The cross-hatch tape adhesion test confirmed the strong adherence of the superhydrophobic coating. On damage of the superhydrophobic coating, the regeneration is achieved by immersing it in sodium stearate solution for 6 h where a 10° increase in contact angle is observed. Electrochemical studies in 0.1 M NaCl showed significant decrease in the passive current density and a delayed pitting, confirming better corrosion resistance of the coating in chloride environment.

36 MATERIALS SCIENCE↗

Catalytic Aquathermolysis of High-Viscosity Oil Using Iron, Cobalt, and Copper Tallates

The results of a study of the composition of active forms of the catalyst formed upon degradation of the precursor, based on the results of physical modeling of a sample of high-viscosity oil having high asphaltene and resin contents, are presented. Oil-soluble iron, cobalt, and copper tallates were used as the objects of the study. The composition of the separated powder of the active form of the catalyst was determined by X-ray diffraction analysis, and the catalyst particle size was determined by scanning electron microscopy. The SARA (saturate, aromatic, resin and asphaltene) analysis data revealed a marked decrease in high-molecular-weight oil components due to thermocatalytic cracking. The basic transformation mechanism is breakdown of the high-molecular-weight compounds along the sulfur-bearing bonds, as indicated by elemental CHNS (carbon, hydrogen, nitrogen and sulfur) analysis data. It is shown that the cobalt- and copper-based oil-soluble complexes turn are converted to sulfide forms and the iron-based complex is converted to the oxide form. According to the results of scanning electron microscopic analysis of the catalyst, the particle size is about 60 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Denoising Autoencoder for Improved Kikuchi Pattern Quality and Indexing in Electron Backscatter Diffraction

The rapid collection and indexing of electron diffraction patterns as produced via electron backscatter diffraction (EBSD) has enabled crystallographic orientation and structural determination, as well as additional property-determining strain and dislocation density information with increasing speed, resolution, and efficiency. Pattern indexing quality is reliant on the noise of the collected electron diffraction patterns, which is often convoluted by sample preparation and data collection parameters. EBSD acquisition is sensitive to many factors and thus can result in low confidence index (CI), poor image quality (IQ), and improper minimization of fit, which can result in noisy datasets and misrepresent the microstructure. In an attempt to enable both higher speed EBSD data collection and enable greater orientation fit accuracy with noisy datasets, an image denoising autoencoder was implemented to improve pattern quality. Here, we show that EBSD data processed through the autoencoder results in a higher CI, IQ, and a more accurate degree of fit. In addition, using denoised datasets in HR-EBSD cross correlative strain analysis can result in reduced phantom strain from erroneous calculations due to the increased indexing accuracy and improved correspondence between collected and simulated patterns.

36 MATERIALS SCIENCE↗

Crystallographic analysis of nano-tendril bundle vs fuzz growth on tungsten exposed to helicon wave-coupled helium plasma

The propensity for nano-tendril bundle (NTB) vs widespread nano-tendril growth (i.e., fuzz) on polycrystalline W under varying ion energy modulation conditions, from DC to peak-to-peak energy modulation of 42 eV at 13.56 MHz, is correlated with the crystal orientation of the underlying grains. Grains that are vicinal to crystal orientations with high surface diffusivity (e.g., {101} for a body centered cubic crystal structure) exhibit NTB growth at lower ion energy modulation amplitude than grains that are vicinal to low surface diffusivity orientations, such as {100}. Adatom mobility considerations are presented to describe the experimental observations. These results support that surface diffusion or W adatom mobility enhanced by ion bombardment plays a key role in the surface morphology evolution of W under He irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗