Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

Narrow and Intense Resonances in the Low Frequency Region of Surface Enhanced Raman Spectra of Single Wall Carbon Nanotubes

Previously unexplored low-frequency Raman modes of single wall carbon nanotubes (SWNTs) are reported. Gold deposited onto a randomly oriented top layer of vertically aligned carbon nanotube arrays was used to induce surface enhanced Raman scattering (SERS) 'hot spots' on large-diameter SWNTs with SERS intensities up to 1900 times greater than normal Raman intensities. The linewidths of the resonances (down to 0.3 cm-1) are 10 times narrower than previously measured for individual SWNTs. Pairs of intense sharp resonances with identical excitation profiles were found and tentatively interpreted as the low-energy longitudinal optical and radial breathing modes of the same nanotube. SERS lines in the region of 14-30 cm-1 were tentatively assigned to the ring modes of SWNTs in agreement with existing theories

36 MATERIALS SCIENCE↗

Statistical isotropy violation of the CMB brightness fluctuations

Certain anomalies at large angular scales in the cosmic microwave background (CMB) measured by WMAP have been suggested as possible evidence of breakdown of statistical isotropy (SI). SI violation of cosmological perturbations is a generic feature of ultralarge scale structure of the cosmos and breakdown of global symmetries. Most CMB photons free-stream to the present from the surface of last scattering. It is thus reasonable to expect statistical isotropy violation in the CMB photon distribution observed now to have originated from SI violation in the baryon-photon fluid at last scattering, in addition to anisotropy of the primordial power spectrum studied earlier in the literature. We consider the generalized anisotropic brightness distribution fluctuations, {Delta}(k-vector, n-circumflex, {tau}) (at conformal time {tau}) in contrast to the SI case where it is simply a function of |k-vector| and k-circumflex{center_dot}n-circumflex. The brightness fluctuations expanded in bipolar spherical harmonic (BipoSH) series can then be written as {Delta}{sub l{sub 1}}{sub l{sub 2}}{sup LM}(k,{tau}), where L>0 terms encode deviations from statistical isotropy. Violation of SI encoded in the present off-diagonal elements of the harmonic space correlation <a{sub lm}a{sub l}{sup '}{sub m}{sup '}*>, equivalently, the BipoSH coefficients A{sub ll}{sup 'LM}, are then related to the generalized BipoSH brightness fluctuation terms at present. We study the evolution of {Delta}{sub l{sub 1}}{sub l{sub 2}}{sup LM}(k,{tau}) from nonzero terms {Delta}{sub l{sub 3}}{sub l{sub 4}}{sup LM}(k,{tau}{sub s}) at last scattering, in the free-streaming regime. We show that the terms with given BipoSH multipole LM evolve independently. Moreover, similar to the SI case, power at small spherical harmonic (SH) multipoles of {Delta}{sub l{sub 3}}{sub l{sub 4}}{sup LM}(k,{tau}{sub s}) at the last scattering is transferred to {Delta}{sub l{sub 1}}{sub l{sub 2}}{sup LM}(k,{tau}) at larger SH multipoles. The structural similarity is more apparent in the asymptotic expression for large values of the final SH multipoles. This formalism allows an elegant identification of any SI violation observed today to a possible origin in SI violating physics present in the baryon-photon fluid. This is illustrated for the known result of SI violating angular correlations due to the presence of a homogeneous magnetic field in the baryon-photon fluid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pseudoscalar Perturbations and Polarization of the Cosmic Microwave Background

We show that models of new particle physics containing massless pseudoscalar fields superweakly coupled to photons can be very efficiently probed with CMB polarization anisotropies. The stochastic pseudoscalar fluctuations generated during inflation provide a mechanism for converting E-mode polarization to B-mode during photon propagation from the surface of last scattering. The efficiency of this conversion process is controlled by the dimensionless ratio H/(2pif{sub a}), where H is the Hubble scale during inflation, and f{sub a}{sup -1} is the strength of the pseudoscalar coupling to photons. The current observational limits on the B mode constrain this ratio to be less than 0.07, which in many models of inflation translates to a sensitivity to f{sub a} exceeding 10{sup 14} GeV, which surpasses other tests.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of a cosmographic distance ratio with galaxy and cosmic microwave background lensing

We measure the gravitational lensing shear signal around dark matter halos hosting constant mass galaxies using light sources at z~1 (background galaxies) and at the surface of last scattering at z~1100 (the cosmic microwave background). The galaxy shear measurement uses data from the CFHTLenS survey, and the microwave background shear measurement uses data from the Planck satellite. The ratio of shears from these cross-correlations provides a purely geometric distance measurement across the longest possible cosmological lever arm. This is because the matter distribution around the halos, including uncertainties in galaxy bias and systematic errors such as miscentering, cancels in the ratio for halos in thin redshift slices. We measure this distance ratio in three different redshift slices of the constant mass (CMASS) sample and combine them to obtain a 17% measurement of the distance ratio, r = 0.390 +0.070 –0.062 , at an effective redshift of z = 0.53. As a result, this is consistent with the predicted ratio from the Planck best-fit cold dark matter model with a cosmological constant cosmology of r = 0.419.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of Plasmonic nanoprobes for SERS sensing and imaging of biotargets in plant systems

The knowledge over gene expression dynamics and location in plants is crucial for applications ranging from basic biological research to agricultural biotechnology (e.g., biofuel development). However, current methods cannot provide in vivo dynamic detection of genomic targets in plants. This limitation is due to the complex sample preparation needed by current methods for nucleic acids detection, which disrupt spatial and temporal resolution. We report the development of a unique multimodal method based on plasmonics-active nanoprobes, referred to inverse molecular sensitnels capable of in vivo imaging and biosensing of microRNA biotargets within whole plant using surface-enhanced Raman scattering (SERS) detection. This work lays the foundations for in vivo functional imaging of RNA biotargets in plants with previously unmet spatial and temporal resolution for many applications ranging from agricultural biotechnology to biofuel research.

biofuel↗

A Re-Usable SERS Substrate Prepared by Atomic Layer Deposition of Alumina on a Multi-Layer Gold and Silver Film

A thermally stable, re-usable surface-enhanced Raman scattering (SERS) substrate consisting of a gold/silver bi-layer film with a protective alumina coating is reported. The film is synthesized by thermally evaporating sequential layers of gold and silver followed by coating an ultra-thin alumina layer using atomic layer deposition. The use of gold as the foundational layer improves the thermal stability of the metal bi-layer film while providing the additional ability to tune the SERS response. Deposition of the thin alumina overlayer on the bi-layer film creates a SERS substrate capable of enduring multiple high temperature exposures to 400 C with minimal loss of enhancement capabilities. We demonstrate the multi-use capability of the substrate by measuring the SERS spectrum of rhodamine 6G followed by a thermal treatment at 400 C to remove the analyte. A representative substrate was used to acquire SERS spectra of rhodamine 6G up to five repeat measurements, thus establishing the re-usability of this relatively simple, inexpensive and stable substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal gas cooling with minimal aero-opticaldistortion for next generation high-average-power lasers (Progress report, Year 2)

Next-generation lasers that combine high-peak-power ultrashort pulses with high repetition rates have the potential to efficiently deliver the high-average-power outputs required for inertial fusion energy generation, laser-based particle acceleration, and to generate compact secondary x- and 𝛾-ray radiation sources, among others. The combination of long gain length with high surface-to-volume ratio to remove residual heat makes gas-cooled multi-slab amplifier heads an inherently aperture- and average power scalable technology that enables this new class of solid-state lasers, and their thermal management becomes the most pressing technical challenge. As the index-of refraction depends on the gas density, heat removal from the slab surfaces unavoidably entails scattering of propagated light from regions of high temperature fluctuations. The requirement to maximize convective heat extraction from the gain medium under the constraint of minimum optical aberration of the beam renders amplifier slab cooling a technological challenge at the intersection of aero-optics, fluid-mechanics and heat transfer. The goal of this research is to leverage computational fluid dynamics and aero optics simulations of different levels of fidelity to devise a numerical modeling and optimization framework for gas-cooled multi-slab amplifiers. The project will be conducted in close collaboration with the Advanced Photon Technologies Group at Lawrence Livermore National Laboratory, where a gas-cooled test stand for laser materials and thermal management structures will be developed and installed. The final goal of the collaborative effort is to manufacture and benchmark a physical prototype of an numerically optimized amplifier head design. Measurement data on solid-state and thermo-optical distortions will be used for the validation of the numerical models. The key technical challenge in this multi-objective design problem is that of balancing optimal heat removal with minimal optical distortion. To facilitate computationally efficient design optimization and, at the same time, deepen our basic understanding of the interaction of light with turbulence, a complementary study that combines high and low-fidelity flow simulations and aero-optical models is proposed. Along the lines of these two objectives and solution strategies, the project is organized into two thrusts.

42 ENGINEERING↗

Spectroscopic Chemical Sensing and Imaging: From Plants to Animals and Humans

Chemical sensing and imaging technologies are of great importance in medical diagnostics and environmental sensing due to their ability to detect and localize chemical targets and provide valuable information in real-time. Biophotonic techniques are the most promising for in vivo applications due to their minimal invasivity. Our laboratory has introduced various biophotonics-based technologies for chemical sensing and imaging for biochemical sensing, medical diagnostics, and fundamental research. Over the years, we have developed a wide variety of fluorescence and surface-enhanced Raman scattering (SERS)-based technologies for the detection of biomarkers for cancer and other diseases. This paper provides an overview of the research on chemical and biological sensors developed in our laboratory, highlighting our work on in vivo imaging and sensing, including minimally invasive detection of endogenous fluorophores associated with malignant tissue, SERS-tag localization of cancer cells and tissues, and SERS-based detection of nucleic acid biotargets and its feasibility for in vivo applications. This manuscript also presents new development on the use of Raman imaging of SERS-labeled nanoprobes incubated in leaves for use in biofuel research, laying the foundation for studies on functional imaging of nucleic acid biomarkers in plants.

Strobbia, Pietro (ORCID:0000000308846185)↗

Size-Dependent Electrical Transport Properties in Conducting Diamond Nanostripes

With the advances in nanofabrication technology, horizontally aligned and well-defined nitrogen-doped ultrananocrystalline diamond nanostripes can be fabricated with widths in the order of tens of nanometers. The study of the size-dependent electron transport properties of these nanostructures is crucial to novel electronic and electrochemical applications. In this paper, 100 nm thick n-type ultrananocrystalline diamond thin films were synthesized by microwave plasma-enhanced chemical vapor deposition method with 5% N2 gas in the plasma during the growth process. Then the nanostripes were fabricated using standard electron beam lithography and reactive ion etching techniques. The electrical transport properties of the free-standing single nanostripes of different widths from 75 to 150 nm and lengths from 1 to 128 μm were investigated. The study showed that the electrical resistivity of the n-type ultrananocrystalline diamond nanostripes increased dramatically with the decrease in the nanostripe width. The nanostripe resistivity was nearly doubted when the width was reduced from 150 nm to 75 nm. The size-dependent variability in conductivity could originate from the imposed diffusive scattering of the nanostripe surfaces which had a further compounding effect to reinforce the grain boundary scattering.

Zhou, Andrew F. (ORCID:0000000243050409)↗

Fabrication of Periodic Gold Nanocup Arrays Using Colloidal Lithography

Within recent years, the field of plasmonics has exploded as researchers have demonstrated exciting applications related to chemical and optical sensing in combination with new nanofabrication techniques. A plasmon is a quantum of charge density oscillation that lends nanoscale metals such as gold and silver unique optical properties. In particular, gold and silver nanoparticles exhibit localized surface plasmon resonances—collective charge density oscillations on the surface of the nanoparticle—in the visible spectrum. Here, we focus on the fabrication of periodic arrays of anisotropic plasmonic nanostructures. These half-shell (or nanocup) structures can exhibit additional unique light-bending and polarization dependent optical properties that simple isotropic nanostructures cannot. Researchers are interested in the fabrication of periodic arrays of nanocups for a wide variety of applications such as low-cost optical devices, surface-enhanced Raman scattering, and tamper indication. We present a scalable technique based on colloidal lithography in which it is possible to easily fabricate large periodic arrays of nanocups using spin-coating and self-assembled commercially available polymeric nanospheres. Electron microscopy and optical spectroscopy from the visible to near-IR was performed to confirm successful nanocup fabrication. We conclude with a demonstration of the transfer of nanocups to a flexible, conformal adhesive film.

nano↗

Accurate in vivo tumor detection using plasmonic-enhanced shifted-excitation Raman difference spectroscopy (SERDS)

For the majority of cancer patients, surgery is the primary method of treatment. In these cases, accurately removing the entire tumor without harming surrounding tissue is critical; however, due to the lack of intraoperative imaging techniques, surgeons rely on visual and physical inspection to identify tumors. Surface-enhanced Raman scattering (SERS) is emerging as a non-invasive optical alternative for intraoperative tumor identification, with high accuracy and stability. However, Raman detection requires dark rooms to work, which is not consistent with surgical settings. Methods: Herein, we used SERS nanoprobes combined with shifted-excitation Raman difference spectroscopy (SERDS) detection, to accurately detect tumors in xenograft murine model. Results: We demonstrate for the first time the use of SERDS for in vivo tumor detection in a murine model under ambient light conditions. We compare traditional Raman detection with SERDS, showing that our method can improve sensitivity and accuracy for this task. Conclusion: Our results show that this method can be used to improve the accuracy and robustness of in vivo Raman/SERS biomedical application, aiding the process of clinical translation of these technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detection of oil spills using 13.3 GHz radar scatterometer

The results of an analysis of 13.3-GHz single polarized scatterometer data collected during NASA/MSC Mission 135, flown on March 16, 1970 are reported. Data were gathered over a crude oil spill on the Gulf of Mexico off the Mississippi Delta. With the aid of RC-8 camera photographs, the scattering cross section was correlated with the extent of the oil spill. The scattering cross section at higher incidence angles decreased by 5 db to 10 db in the presence of the oil spill. This was attributed to oil's damping of small gravity and capillary waves. The composite scattering theory and the scatterometer acquired data were used to obtain an expression of radar scattering over ocean surfaces with oil spills. The study demonstrates that the presence and extent of oil spills can be detected using high frequency radar systems.

Krishen, K.↗

The composite scattering model for radar sea return

A composite scattering model, suitable for explaining the behavior of measured scattering cross sections of the ocean surface, is presented. Furthermore, utilizing this scattering model, the spectrums of the small gravity, gravity-capillary, waves will be predicted for MSA/MSC, 13.3 GHz Scatterometer data.

Krishen, K.↗