Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75

WREF Halo Streamline scanning lidar / Derived data / High-frequency wind profiles

This dataset contains wind profiles retrieved from 6-beam Velocity Azimuth Display (VAD) scans done by the UC Davis scanning Lidar. The wind components (expressed as zonal, meridional and vertical) are retrieved through the algorithm of Paschke et al. (2015). The quality control of the radial wind speed is performed following the algorithm of Goring & Nikora (2002).

17 WIND ENERGY↗

Lunar surface magnetometer experiment

The Apollo 15 lunar-surface magnetometer (LSM) is one of a network of magnetometers that have been deployed on the moon to study intrinsic remanent magnetic fields and global magnetic response of the moon to large-scale solar and terrestrial magnetic fields. From these field measurements, properties of the lunar interior such as magnetic permeability, electrical conductivity, and temperature can be calculated. In addition, correlation with solar-wind-spectrometer data allows study of the the solar-wind plasma interaction with the moon and, in turn, investigation of the resulting absorption of gases and accretion of an ionosphere. These physical parameters and processes determined from magnetometer measurements must be accounted for by comprehensive theories of origin and evolution of the moon and solar system.

Dyal, P.↗

Identification of aircraft stability and control derivatives in the presence of turbulence

A maximum likelihood estimator for a linear system with state and observation noise is developed to determine stability and control derivatives from flight data obtained in the presence of turbulence. The formulation for the longitudinal short-period mode is presented briefly, including a special case that greatly simplifies the problem if the measurement noise on one signal is negligible. The effectiveness and accuracy of the technique are assessed by applying it first to simulated flight data, in which the true parameter values and state noise are known, then to actual flight data obtained in turbulence. The results are compared with data obtained in smooth air and with wind-tunnel data. The complete maximum likelihood estimator, which accounts for both state and observation noise, is shown to give the most accurate estimate of the stability and control derivatives from flight data obtained in turbulence. It is superior to the techniques that ignores state noise and to the simplified method that neglects the measurement noise on the angle-of-attack signal.

Iliff, K. W.↗

Force and moment data from a wind-tunnel test of a tilt-nacelle V/STOL propulsion system with an attitude control vane

A large scale, tilt nacelle V/STOL propulsion system, with an attitude control vane assembly mounted in the exhaust, was tested. The effectiveness of the control vane as well as the aerodynamic characteristics of the entire propulsion system were determined. The results, in the form of tabulated coefficients, for both the vane forces and moments and the total forces and moments produced by the propulsion system are presented.

Betzina, M. D.↗

Feasibility study of a procedure to detect and warn of low-level wind shear

The wind shear program is directed toward investigating the effects of wind shear on aerodynamic performance. Combining the Joint Airport Weather Studies wind shear data with the B-57B gust gradient data, the transient scales of motion involved in wind shear aircraft accidents or mishaps are being identified. The effect of variable winds having these time scales on the aerodynamic coefficients of moist airfoils were fully investigated. Transient and spatial variation of flow over the airfoil may cause premature stall or hysteresis effects which significantly impact the lift and drag (i.e., aerodynamic coefficients). Analysis of airfoil performance subject to 4-D variable flows will be carried out.

Frost, W.↗

Wind Shear/Turbulence Inputs to Flight Simulation and Systems Certification

The purpose of the workshop was to provide a forum for industry, universities, and government to assess current status and likely future requirements for application of flight simulators to aviation safety concerns and system certification issues associated with wind shear and atmospheric turbulence. Research findings presented included characterization of wind shear and turbulence hazards based on modeling efforts and quantitative results obtained from field measurement programs. Future research thrusts needed to maximally exploit flight simulators for aviation safety application involving wind shear and turbulence were identified. The conference contained sessions on: Existing wind shear data and simulator implementation initiatives; Invited papers regarding wind shear and turbulence simulation requirements; and Committee working session reports.

Bowles, Roland L.↗

Turbulence models

The subject of modeling turbulence for use with the JAWS wind shear data sets is addressed. The present FAA AC 120-41 wind shear models are quasisteady wind models. FAA recommends superimposing upon these winds a Dryden spectrum model of turbulence. For the JAWS data, it must be decided whether this approach is adequate or whether turbulence must be analyzed and modeled differently. This question is discussed in detail.

Frost, Walter↗

Aeroelastic response of metallic and composite propfan models in yawed flow

An analytical investigation of aeroelastic response of metallic and composite propfan models in yawed flow was performed. The analytical model is based on the normal modes of a rotating blade and the three dimensional unsteady lifting surface aerodynamic theory including blade mistuning. The calculated blade stresses or strains are compared with published wind tunnel data on two metallic and three composite propfan wind tunnel models. The comparison shows a good agreement between theory and experiment. Additional parametric results indicate that blade response is very sensitive to the blade stiffness and also to blade frequency and mode shape mistuning. From these findings, it is concluded that both frequency and mode shape mistuning should be included in aeroelastic response analysis. Furthermore, both calculated and measured strains show that combined blade frequency and mode shape mistuning has beneficial effects on response due to yawed flow.

Kaza, Krishna Rao V.↗

Aeroelastic response of metallic and composite propfan models in yawed flow

An analytical investigation of aeroelastic response of metallic and composite propfan models in yawed flow was performed. The analytical model is based on the normal modes of a rotating blade and the three-dimensional unsteady lifting surface aerodynamic theory including blade mistuning. The calculated blade stresses or strains are compared with published wind tunnel data on two metallic and three composite propfan wind tunnel models. The comparison shows a good agreement between theory and experiment. Additional parametric results indicate that blade response is very sensitive to the blade stiffness and also to blade frequency and mode shape mistuning. From these findings, it is concluded that both frequency and mode shape mistuning should be included in aeroelastic response analysis. Furthermore, both calculated and measured strains show that combined blade frequency and mode shape mistuning has beneficial effects on response due to yawed flow.

Kaza, Krishna Rao↗

Comparison of special sensor microwave imager vector wind stress with model-derived and subjective products for the tropical Pacific

An assessment of a new source of vector wind stress data relative to existing analyses of the surface wind field is presented. The large-scale variability of vector wind stress generated by Atlas et al. (1991) and based on the special sensor microwave imager (SSM/I) remotely sensed observations of surface wind speed is compared with five operational and subjectively analyzed wind products across the tropical Pacific basin for the first year of SSM/I, July 1987 through June 1988. The spatial and temporal variability of the zonal component, meridional component, and curl of the wind stress are examined relative to their future use in wind-driven ocean model studies of tropical Pacific Ocean circulation.

Busalacchi, Antonio J.↗

Rarefied-flow shuttle aerodynamics flight model

A model of the Shuttle Orbiter rarefied-flow aerodynamic force coefficients has been derived from the ratio of flight acceleration measurements. The in-situ, low frequency, low level acceleration measurements are made during atmospheric reentry. The experiment equipment designed and used for this task is the High Resolution Accelerometer Package (HiRAP), one of the sensor packages in the Orbiter Experiments Program. To date, 12 HiRAP reentry mission data sets spanning a period of about 10 years have been processed. The HiRAP derived aerodynamics model is described in detail. The model includes normal and axial hypersonic continuum coefficient equations as functions of angle-of-attack, body flap deflection, and elevon deflection. Normal and axial free molecule flow coefficient equations as a function of angle-of-attack are also presented, along with flight derived rarefied-flow transition bridging formulas. Comparisons are made between the aerodynamics model and data from the Orbiter Operational Aerodynamic Design Data Book, and applicable computer simulations and wind-tunnel data.

Blanchard, Robert C.↗