Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Evaluation of a pulse control law for flexible spacecraft

The following analytical and experimental studies were conducted: (1) A simple algorithm was developed to suppress the structural vibrations of 3-dimensional distributed parameter systems, subjected to interface motion and/or directly applied forces. The algorithm is designed to cope with structural oscillations superposed on top of rigid-body motion: a situation identical to that encountered by the SCOLE components. A significant feature of the method is that only local measurements of the structural displacements and velocities relative to the moving frame of reference are needed. (2) A numerical simulation study was conducted on a simple linear finite element model of a cantilevered plate which was subjected to test excitations consisting of impulsive base motion and of nonstationary wide-band random excitation applied at its root. In each situation, the aim was to suppress the vibrations of the plate relative to the moving base. (3) A small mechanical model resembling an aircraft wing was designed and fabricated to investigate the control algorithm under realistic laboratory conditions.

Source record↗

Optical and magneto-optical properties of ferromagnetic monolayer CrBr 3 : A first-principles G W and G W plus Bethe-Salpeter equation study

The discovery of atomically thin two-dimensional (2D) magnetic semiconductors has triggered enormous research interest recently. In this paper, we use first-principles many-body perturbation theory to study a prototypical 2D ferromagnetic semiconductor, monolayer chromium tribromide (CrBr 3 ). With broken time-reversal symmetry, spin-orbit coupling, and excitonic effects included through the full-spinor GW and GW plus Bethe-Salpeter equation (GW-BSE) methods, we compute the frequency-dependent layer polarizability tensor and dielectric function tensor that govern the optical and magneto-optical (MO) properties. In addition, we provide a detailed theoretical formalism for simulating magnetic circular dichroism, MO Kerr effect, and Faraday effect, demonstrating the approach with monolayer CrBr 3 . Due to reduced dielectric screening in 2D and the localized nature of the Cr d orbitals, we find strong self-energy effects on the quasiparticle band structure of monolayer CrBr 3 that give a 3.8 eV indirect bandgap. Also, excitonic effects dominate the low-energy optical and MO responses in monolayer CrBr 3 where a large exciton binding energy of 2.3 eV is found for the lowest bright exciton state with excitation energy at 1.5 eV. We further find that the MO signals demonstrate strong dependence on the excitation frequency and substrate refractive index. Furthermore, our theoretical framework for modeling optical and MO effects could serve as a powerful theoretical tool for future study of optoelectronic and spintronics devices consisting of van der Waals 2D magnets.

36 MATERIALS SCIENCE↗

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗

InAs sidewall tunnel diodes enabled by surface states

Negative differential resistance (NDR), where the device current decreases with increasing bias voltage, is a representative phenomenon where quantum mechanics induces counterintuitive physical behavior and offers promising applications such as high-frequency oscillators, amplifiers, and multilevel logic circuits. While the NDR behavior has been extensively studied in various materials and devices, the role of surface properties in NDR, particularly in InAs-based diodes, remains underexplored. In this work, we report the observation of NDR in vertically structured InAs p + n diodes that exhibit a peak-valley current ratio of ∼6, which is suitably high for applications. Circumference-normalized current–voltage characterization revealed that the NDR originates from band-to-band tunneling between the valence band of p + -InAs and the conduction band of an n + -InAs surface, where the n + surface is due to surface states on otherwise n − -InAs. In addition, by comparing devices with various surface passivation methods (without intentional passivation, benzocyclobutene polymer, and silicon nitride), we found that the surface termination significantly affects the NDR characteristics. We present an equivalent circuit model to explain the observed device behavior. These findings offer insights into surface-enabled NDR phenomena and present new knobs for engineering NDR devices.

Circuit theorems↗

The Study of High Spin States in Nuclear Rotation by the Cranked Nilsson Strutinsky Model

A heavy-ion reaction can populate nuclear states of very high angular momentum with values of the order of I = 60 achievable. The reaction produces such configurations with a considerable internal excitation, but the emission of a few neutrons reduces the excitation energy effectively while not decreasing the spin by much. At sufficiently high spin the pairing is destroyed completely and the rigid-body moment of inertia becomes a good approximation. Even in this regime, however, the single-particle structure remains important and shell effects can be studied in terms of a rotating phenomenological shell model. On the theoretical side the cranked Nilsson strutinsky model has proved to be a successful tool to describe rapidly rotating nucleus. Indeed, this model gives a microscopic description of the influence of rotation on single-particle motion. This paper will concentrate on introduction to the cranked Nilsson strutinsky model in details. First, we explain the cranking model and the rotating liquid-drop model, then introduce the shell correction method. Also, we describe terminating bands, which show a continuous transition from high collectivity to a pure particle-hole state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-precision phase control of an optical lattice with up to 50 dB noise suppression

An optical lattice is a periodic light crystal constructed from the standing-wave interference patterns of laser beams. It can be used to store and manipulate quantum degenerate atoms and is an ideal platform for the quantum simulation of many-body physics. A principal feature is that optical lattices are flexible and possess a variety of multidimensional geometries with modifiable band structure. An even richer landscape emerges when control functions can be applied to the lattice by modulation of the position or amplitude with Floquet driving. However, the desire of realizing high-modulation bandwidths while preserving extreme lattice stability has been difficult to achieve. In this paper, we demonstrate an effective solution that consists of overlapping two counterpropagating lattice beams and controlling the phase and intensity of each with independent acousto-optic modulators. Our phase controller mixes sampled light from both lattice beams with a common optical reference. This dual heterodyne locking method allows exquisite determination of the lattice position, while also removing parasitic phase noise accrued as the beams travel along separate paths. Here, we report up to 50 dB suppression in lattice phase noise in the 0.1–1 Hz band, along with significant suppression spanning more than 4 decades of frequency. The absolute phase diffusion of the lattice position is only 10 Å when integrated over 10 s. This method permits precise, high-bandwidth modulation (greater than 50 kHz) of the optical lattice intensity and phase. We demonstrate the efficacy of this approach by executing intricate time-varying phase profiles for atom interferometry.

Atom interferometry↗

Vibrational spectroscopic and structural investigations on fullerene: A DFT approach

The molecular structure of fullerene (C{sub 60}) molecule was optimized by the DFT/B3LYP method with 6-31G and 6-31G(d,p) basis sets using Gaussian 09 program. The vibrational frequencies were calculated for the optimized molecular structure of the molecule. The calculated vibrational frequencies confirm that the molecular structure of the molecule was located at the minimum energy potential energy surface. The calculated vibrational frequencies were assigned on the basis of functional group analysis and also confirmed using the GaussView 05 software. The frontier molecular orbitals analysis was carried out. The FMOs related molecular properties were predicted. The higher ionization potential, higher electron affinity, higher softness, lower band gap energy and lower hardness values were obtained, which confirm that the fullerene molecule has a higher molecular reactivity. The Mulliken atomic charge distribution of the molecule was also calculated. Hence, these results play an important role due to its potential applications as drug delivery devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large perpendicular magnetic anisotropy of single Co atom on MgO monolayer: A first-principles study

Realizing the magnetic bit with a single atom is the ultimate goal for magnetic storage. Based on density functional theory, the magnetic anisotropy (MA) of single Co atom on MgO monolayer has been investigated. Results show that this two dimensional system possesses a large perpendicular MA, about 5.8 meV per Co atom. Besides, there exists remarkable unquenched orbital moments for different magnetization directions, which can be attributed to the reduction of coordination number in two dimensional system and is responsible for the enhanced MA. The Bloch pseudo-wavefunction and band structure of Co d-orbitals have been calculated to elucidate the origin of the perpendicular MA.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of oxygen impurity on electronic properties of carbon and boron nitride nanotubes: A comparative study

Influence of oxygen impurity on electronic properties of carbon and boron nitride nanotubes (CNTs and BNNTs) is systematically studied using first principle calculations based on density functional theory. Energy band structures and density of states of optimized zigzag (5, 0), armchair (3, 3), and chiral (4, 2) structures of CNT and BNNT are calculated. Oxygen doping in zigzag CNT exhibits a reduction in metallicity with opening of band gap in near-infrared region while metallicity is enhanced in armchair and chiral CNTs. Unlike oxygen-doped CNTs, energy bands are drastically modulated in oxygen-doped zigzag and armchair BNNTs, showing the nanotubes to have metallic behaviour. Furthermore, oxygen impurity in chiral BNNT induces narrowing of band gap, indicating a gradual modification of electronic band structure. This study underscores the understanding of different electronic properties induced in CNTs and BNNTs under oxygen doping, and has potential in fabrication of various nanoelectronic devices.

36 MATERIALS SCIENCE↗

Improved Crystalline Structure and Enhanced Photoluminescence of ZnO Nanolayers in B i2 Se 3 /ZnO Heterostructures

The Bi 2 Se 3 /ZnO heterostructure is a new combination of high- and low-band-gap nanomaterials that can be implemented for optoelectronic devices. The influence of the Bi 2 Se 3 substrate on crystallization of ZnO nanolayers and charge separation at the Bi 2 Se 3 /ZnO interface reflects these important parameters, which affect optical and electronic properties of the heterostructure. Despite a few studies on Bi 2 Se 3 /ZnO heterostructures, the mechanisms of enhanced optical properties and correlation between optical and structural properties in such heterostructures are not studied in detail. In the present paper, we report on structure and optical properties of ZnO nanolayers with different thicknesses (10–150 nm) deposited by atomic layer deposition on planar and nonplanar Bi 2 Se 3 nanostructured coatings. Crystallization of ZnO nanolayers grown on Bi 2 Se 3 and Si substrates was analyzed by X-ray diffraction and scanning and transmission electron microscopy methods. Enhancement of ZnO photoluminescence in Bi 2 Se 3 /ZnO heterostructures in comparison to the photoluminescence of ZnO nanolayers of the same thickness deposited on p-doped Si substrates was observed. Correlation between the structure and optical properties of ZnO nanolayers in Bi 2 Se 3 /ZnO heterostructures is analyzed. Three complementary mechanisms of enhancement of optical properties of ZnO in Bi 2 Se 3 /ZnO heterostructures, based on charge separation at the Bi 2 Se 3 /ZnO interface, improvement of ZnO crystalline structure, and surface-plasmon–photon coupling, are proposed. The Bi 2 Se 3 /ZnO heterostructure is a new combination of high- and low-band-gap nanomaterials that can be implemented for optoelectronic devices. The influence of the Bi 2 Se 3 substrate on crystallization of ZnO nanolayers and charge separation at the Bi 2 Se 3 /ZnO interface reflects these important parameters, which affect optical and electronic properties of the heterostructure. Despite a few studies on Bi 2 Se 3 /ZnO heterostructures, the mechanisms of enhanced optical properties and correlation between optical and structural properties in such heterostructures are not studied in detail. In the present paper, we report on structure and optical properties of ZnO nanolayers with different thicknesses (10–150 nm) deposited by atomic layer deposition on planar and nonplanar Bi 2 Se 3 nanostructured coatings. Crystallization of ZnO nanolayers grown on Bi 2 Se 3 and Si substrates was analyzed by X-ray diffraction and scanning and transmission electron microscopy methods. Enhancement of ZnO photoluminescence in Bi 2 Se 3 /ZnO heterostructures in comparison to the photoluminescence of ZnO nanolayers of the same thickness deposited on p-doped Si substrates was observed. Correlation between the structure and optical properties of ZnO nanolayers in Bi 2 Se 3 /ZnO heterostructures is analyzed. Finally, three complementary mechanisms of enhancement of optical properties of ZnO in Bi 2 Se 3 /ZnO heterostructures, based on charge separation at the Bi 2 Se 3 /ZnO interface, improvement of ZnO crystalline structure, and surface-plasmon–photon coupling, are proposed.

36 MATERIALS SCIENCE↗

Effect of carbon/hydrogen species incorporation on electronic structure of anatase-TiO{sub 2}

The energy band structure and optical properties of C-doped and C/H-codoped anatase TiO{sub 2} are investigated using the first-principles based on density-functional theory. The obtained results indicate that the structure of C/H-codoping is more stable than that of C-doping. For C-doped anatase TiO{sub 2}, the band gap narrowing is small, and the high visible-light catalytic ability originates from the isolated C 2p states above the valence-band maximum. With the same carbon doping level, the C/H-codoping produces significant bandgap narrowing, which leads to higher visible-light photocatalytic efficiency than the C-doping does.

36 MATERIALS SCIENCE↗

Role of spin-orbit coupling on crystal-field splitting and phase-stability of rare-earth based layered intermetallic

Layered and incommensurate heterostructures have attracted much attention for the occurrence of superconductivity and charge density waves with the possibility of intercalating foreign atoms. However, lanthanide-based heterostructures where (Eu x Sm 1-x )S and TaS 2 are alternatively stacked have been scarcely investigated. In this work, we performed phase stability, bonding behavior and electronic-structure analysis of (Eu x Sm 1-x )TaS 3 using first-principles density-functional theory methods. Our phase stability analysis suggests 50 at.% solubility of Eu in (Eu x Sm 1-x )TaS 3 compared to Eu solubility in all proportions in cubic SmS. The instability of Eu beyond 50 at.% in (Eu x Sm 1-x )TaS 3 was attributed to higher density of Eu-4f states at the Fermi-level. Based on band position calculated from spin-orbit coupling effect, we constructed a qualitative schematic of possible crystal-field analysis. The local change in bond-length and bond-angle around Eu-S in (Eu x Sm 1-x )TaS 3 correlate well with our crystal-field analysis. We believe that quantum mechanical insights provided in this work will be useful to understand other complex heterostructures.

36 MATERIALS SCIENCE↗

Synthesis of radially aligned nano-rutile modified with Au and Ni for the photodegradation of methyl orange

Radially aligned nano-rutile (RANR) was synthesized using the hydrothermal technique. The RANR structure was formed by the radial aggregation of nanorods with an average width of 9 nm. The radii of RANR ranged between 1.2–1.6 μm. Au and Ni (0.5–10 wt.%) nanoparticles were deposited on the tips of RANR by the deposition-precipitation method using urea. The UV–vis DRS spectrum of RANR had a band edge at 3.2 eV, whereas those of Ni-RANR and Au-RANR were characterized by reflectance peaks that extended into the visible part of the spectrum, with Au-RANR having an SPR peak at 2.25 eV. Photoluminescence studies showed that loading RANR with Ni and Au reduced the recombination rate of the charge carriers. The photodegradation efficiency of the various materials was tested on methyl orange using solar simulator radiation source. RANR was the least efficient material, followed by Ni-RANR composites, with Au-RANR composites having the highest activity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multifunctional Cationic Iridium(III) Complexes Bearing 2-Aryloxazolo[4,5- f ][1,10]phenanthroline (N^N) Ligand: Synthesis, Crystal Structure, Photophysics, Mechanochromic/Vapochromic Effects, and Reverse Saturable Absorption

A series of 2-aryloxazolo[4,5-$f$][1,10]phenanthroline ligands (N^N ligands) and their cationic iridium(III) complexes (1–11, aryl = 4-NO 2 -phenyl (1), 4-Br-phenyl (2), Ph (3), 4-NPh 2 -phenyl (4), 4-NH 2 -phenyl (5), pyridin-4-yl (6), naphthalen-1-yl (7), naphthalen-2-yl (8), phenanthren-9-yl (9), anthracen-9-yl (10), and pyren-1-yl (11)) were synthesized and characterized. By introducing different electron-donating or electron-withdrawing substituents at the 4-position of the 2-phenyl ring (1–5), or different aromatic substituents with varied degrees of π-conjugation (6–11) on oxazolo[4,5-$f$][1,10]phenanthroline ligand, we aim to understand the effects of terminal substituents at the N^N ligands on the photophysics of cationic Ir(III) complexes using both spectroscopic methods and quantum chemistry calculations. Complexes with the 4-R-phenyl substituents adopted an almost coplanar structure with the oxazolo[4,5-$f$][1,10]phenanthroline motif, while the polycyclic aryl substituents (except for naphthalen-2-yl) were twisted away from the oxazolo[4,5-$f$][1,10]phenanthroline motif. All complexes possessed strong absorption bands below 350 nm that emanated from the ligand-localized 1 $π,π*$/ 1 ILCT (intraligand charge transfer) transitions, mixed with 1 LLCT (ligand-to-ligand charge transfer)/ 1 MLCT (metal-to-ligand charge transfer) transitions. At the range of 350–570 nm, all complexes exhibited moderately strong 1 ILCT/ 1 LLCT/ 1 MLCT transitions at 350-450 nm, and broad but very weak 3 LLCT/ 3 MLCT absorption at 450-570 nm. Most of the complexes demonstrated moderate to strong room temperature phosphorescence both in solution and in the solid state. Among them, complex 7 also manifested a drastic mechanochromic and vapochromic luminescence effect. Except for complexes 1 and 4 that contain NO 2 or NPh 2 substituent at the phenyl ring, respectively, all other complexes exhibited moderate to strong triplet excited-state absorption in the spectral region of 440–750 nm. Moderate to very strong reverse saturable absorption (RSA) of these complexes appeared at 532 nm for 4.1 ns laser pulses. The RSA strength followed the trend of $7 > 11 > 9 > 3 > 2 ≈ 4 > 5 ≈ 10 ≈ 6 ≈ 8 > 1$. The photophysical studies revealed that the different 2-aryl substituents on the oxazole ring impacted the singlet and triplet excited-state characteristics dramatically, which in turn notably influenced the RSA of these complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A methodology to identify and quantify mobility-reducing defects in 4H-silicon carbide power metal-oxide-semiconductor field-effect transistors

In this paper, we present a methodology for the identification and quantification of defects responsible for low channel mobility in 4H-Silicon Carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs). To achieve this, we use an algorithm based on 2D-device simulations of a power MOSFET, density functional simulations, and measurement data. Using physical modeling of carrier mobility and interface traps, we reproduce the experimental I-V characteristics of a 4H-SiC doubly implanted MOSFET through drift-diffusion simulation. We extract the position of Fermi level and the occupied trap density as a function of applied bias and temperature. Using these inputs, our algorithm estimates the number of possible trap types, their energy levels, and concentrations at 4H-SiC/SiO{sub 2} interface. Subsequently, we use density functional theory (DFT)-based ab initio simulations to identify the atomic make-up of defects causing these trap levels. We study silicon vacancy and carbon di-interstitial defects in the SiC side of the interface. Our algorithm indicates that the D{sub it} spectrum near the conduction band edge (3.25 eV) is composed of three trap types located at 2.8–2.85 eV, 3.05 eV, and 3.1–3.2 eV, and also calculates their densities. Based on DFT simulations, this work attributes the trap levels very close to the conduction band edge to the C di-interstitial defect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Al{sub 4}SiC{sub 4} wurtzite crystal: Structural, optoelectronic, elastic, and piezoelectric properties

New experimental results supported by theoretical analyses are proposed for aluminum silicon carbide (Al{sub 4}SiC{sub 4}). A state of the art implementation of the density functional theory is used to analyze the experimental crystal structure, the Born charges, the elastic properties, and the piezoelectric properties. The Born charge tensor is correlated to the local bonding environment for each atom. The electronic band structure is computed including self-consistent many-body corrections. Al{sub 4}SiC{sub 4} material properties are compared to other wide band gap wurtzite materials. From a comparison between an ellipsometry study of the optical properties and theoretical results, we conclude that the Al{sub 4}SiC{sub 4} material has indirect and direct band gap energies of about 2.5 eV and 3.2 eV, respectively.

36 MATERIALS SCIENCE↗

Measurement of the concentration ratio for {sup 13}N and {sup 12}N isotopes at atmospheric pressure by carbon dioxide absorption of diode laser radiation at {approx}2 {mu}m

The ratio of {sup 12}NO{sub 2} and {sup 13}CO{sub 2} concentrations in the human exhaled air is measured by the method of diode laser spectroscopy using a three-channel optical scheme and multipass cell. Unlike the previous measurements in the spectral range of {approx}4.3 {mu}m with a resolved rotational structure at low pressure of selected samples, the present measurements are performed in the range of {approx}2 {mu}m, in which weaker absorption bands of CO{sub 2} reside. In this case, it is possible to employ lasers and photodetectors operating at room temperature. The thorough simulation of the spectrum with collisional broadening of lines and employment of regression analysis allow one to take measurements at atmospheric pressure with the accuracy of {approx}0.04%, which satisfies the requirements to medical diagnostics of ulcers. (laser spectroscopy)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Straintronics with single-layer MoS 2 : A quantum Monte Carlo study

Using state-of-the-art quantum Monte Carlo (QMC) methods, we study straintronic properties of a single MoS 2 monolayer. 2D MoS 2 is a quintessential straintronic material for which many experiments have been performed. First, we determine the equilibrium atomic structure which is not known experimentally and is strictly needed to correctly determine the straintronic properties. That enables us to precisely analyze the quasiparticle band gaps for any applied biaxial strain, which we describe by a bivariate paraboloid function of lattice constant and internal structural parameter. Using the fixed-node QMC calculations fitted by analytical formulas, we localize the following excited state crossings between the direct, K → K , and indirect Γ → X and K → K /2 excitations. Based on this highly accurate many-body treatment, we predict a gauge factor of 136 meV/% for the K → K transition and a fairly narrow window of ≈ 2.8 % from compressive to mildly tensile strains, accounting for only ≈ 0.3 eV band gap change maintaining the direct character of the gap. Consequently, we suggest that, compared to other 2D materials, such as phosphorene, there is only a limited straintronic tuneability in this material often studied for its straintronic properties. QMC results are compared to results of standard DFT modeling, which reveal insights into the corresponding inaccuracies and therefore open a window for educated use of rapid DFT approaches. Published by the American Physical Society 2024

Huang, Y.↗