Search for a Stable Six-Quark State at BABAR
Not Available
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
SEARCH · Search NASA
Results for “Collective levels”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evidence of h b ( 2 P ) → ϒ ( 1 S ) η Decay and Search for h b ( 1 P , 2 P ) → ϒ ( 1 S ) π 0 with the Belle Detector
We report the first evidence for the h b ( 2 P ) → ϒ ( 1 S ) η transition with a significance of 3.5 standard deviations. The decay branching fraction is measured to be B [ h b ( 2 P ) → ϒ ( 1 S ) η ] = ( 7.1 − 3.2 + 3.7 ± 0.8 ) × 10 − 3 , which is noticeably smaller than expected. We also set upper limits on π 0 transitions of B [ h b ( 2 P ) → ϒ ( 1 S ) π 0 ] < 1.8 × 10 − 3 , and B [ h b ( 1 P ) → ϒ ( 1 S ) π 0 ] < 1.8 × 10 − 3 , at the 90% confidence level. These results are obtained with a 131.4 fb − 1 data sample collected near the ϒ ( 5 S ) resonance with the Belle detector at the KEKB asymmetric-energy e + e − collider. Published by the American Physical Society 2024
Kovalenko, E. (ORCID:0000000180841931)↗
Observation of new plasmons in the fractional quantum Hall effect: Interplay of topological and nematic orders
Collective modes of exotic quantum fluids reveal underlying physical mechanisms responsible for emergent quantum states. We observe unexpected new collective modes in the fractional quantum Hall (FQH) regime: intra–Landau-level plasmons measured by resonant inelastic light scattering. The plasmons herald rotational-symmetry-breaking (nematic) phases in the second Landau level and uncover the nature of long-range translational invariance in these phases. The intricate dependence of plasmon features on filling factor provides insights on interplays between topological quantum Hall order and nematic electronic liquid crystal phases. A marked intensity minimum in the plasmon spectrum at Landau level filling factor v = 5/2 strongly suggests that this paired state, which may support non-Abelian excitations, overwhelms competing nematic phases, unveiling the robustness of the 5/2 superfluid state for small tilt angles. At v = 7/3, a sharp and strong plasmon peak that links to emerging macroscopic coherence supports the proposed model of a FQH nematic state.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
LIME 0.5
LIME 0.5 is an initial version of a Lightweight Integrating Multi-physics Environment for coupling codes. LIME by itself is not a code for doing multiphysics simulations. Instead, LIME provides the key high-level software, a flexible but defined approach, and interface requirements for a collection of (potentially disparate) physics codes to be combined with strong coupling (when needed) though non-linear solution methods (e.g. JFNK, fixed point), thus creating a new multi-physics simulation capability customized for a particular need. The approach taken is designed to; preserve and leverage any important specialized algorithms and/or functionality an existing application may provide; minimize the requirements barrier for an application to participate; and work within advanced solver frameworks (e.g. as extensions to the Trilinos/NOX nonlinear solver libraries, PETSc, . . .). Of note is that components/physics codes that can be coupled within LIME are NOT limited to: components written in one particular language; a particular numerical discretization approach ( e.g. Finite Element); or physical models expressed as PDE's.
Hooper, Russell↗
Stress- and Radiation-Induced Swelling in Plastic Capsules
The process of filling targets with D-T for cryogenic experiments on the OMEGA laser induces small-scale features on the inner surface of the plastic capsules. Each feature was a cluster of low-level domes (< 0.1 um high) with individual lateral dimensions < 5 um that collectively covered lateral dimensions of up to 300 um 2 . These features were observed only when a high radiation dose was combined with high stress in the plastic wall, as occurs when the capsules are permeation filled and transferred at cryogenic temperatures. No porosity or void structure was observed in or below these domes. It is speculated that the domes are a swelling caused by radiation-induced bond scission and chemical restructuring that reduces the plastic density in localized regions.
tritium-induced damage, plastic capsule↗
Inferring transmission heterogeneity using virus genealogies: estimation and targeted prevention
Spread of HIV typically involves uneven transmission patterns where some individuals spread to a large number of individuals while others to only a few or none. Such transmission heterogeneity can impact how fast and how much an epidemic spreads. Further, more efficient interventions may be achieved by taking such transmission heterogeneity into account. To address these issues, we developed two phylogenetic methods based on virus sequence data: 1) to generally detect if significant transmission heterogeneity is present, and 2) to pinpoint where in a phylogeny high-level spread is occurring. We derive inference procedures to estimate model parameters, including the amount of transmission heterogeneity, in a sampled epidemic. We show that it is possible to detect transmission heterogeneity under a wide range of simulated situations, including incomplete sampling, varying levels of heterogeneity, and including within-host genetic diversity. When evaluating real HIV-1 data from different epidemic scenarios, we found a lower level of transmission heterogeneity in slowly spreading situations and a higher level of heterogeneity in data that included a rapid outbreak, while R0 and Sackin’s index (overall tree shape statistic) were similar in the two scenarios, suggesting that our new method is able to detect transmission heterogeneity in real data. We then show by simulations that targeted prevention, where we pinpoint high-level spread using a coalescence measurement, is efficient when sequence data are collected in an ongoing surveillance system. Such phylogeny-guided prevention is efficient under both single-step contact tracing as well as iterative contact tracing as compared to random intervention.
59 BASIC BIOLOGICAL SCIENCES↗
Mauka Energy FEVER Tool Dataset
Mauka Energy’s dataset, developed under the Forestry Electric Vehicle Energy Routing (FEVER) project and funded by the U.S. Department of Energy’s Small Business Innovation Research program, is a high-resolution geospatial resource designed to support energy modeling for electric log trucks in complex forestry environments. The dataset integrates detailed spatial and road network data to enable accurate simulation of vehicle performance across varied terrain. At its core, the dataset incorporates lidar-derived elevation models, road alignments, and surface classifications from Oregon State University’s McDonald-Dunn Research Forest. These data capture fine-scale variations in slope, curvature, and surface conditions across forest road systems, allowing for vehicle-level analysis of energy consumption and recovery. The dataset also includes data collected on the surrounding public and private road networks in Benton County, Oregon, used in real-world haul routes. These connecting segments provide critical context for modeling transitions between forest operations and regional transportation infrastructure, incorporating attributes such as grade profiles, elevation change, and speed constraints. This combined dataset underpins the development of Mauka Energy’s rolldown tool, which quantifies energy use and regenerative braking potential on downhill and variable-grade segments. By leveraging high-resolution terrain and road data, the FEVER project enables more accurate assessment of electric vehicle feasibility and performance in forestry applications.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
ESS-DIVE Reporting Format for Dataset Package Metadata
ESS-DIVE’s (Environmental Systems Science Data Infrastructure for a Virtual Ecosystem) dataset metadata reporting format is intended to compile information about a dataset (e.g., title, description, funding sources) that can enable reuse of data submitted to the ESS-DIVE data repository. The files contained in this dataset include instructions (dataset_metadata_guide.md and README.md) that can be used to understand the types of metadata ESS-DIVE collects. The data dictionary (dd.csv) follows ESS-DIVE’s file-level metadata reporting format and includes brief descriptions about each element of the dataset metadata reporting format. This dataset also includes a terminology crosswalk (dataset_metadata_crosswalk.csv) that shows how ESS-DIVE’s metadata reporting format maps onto other existing metadata standards and reporting formats.Data contributors to ESS-DIVE can provide this metadata by manual entry using a web form or programmatically via ESS-DIVE’s API (Application Programming Interface). A metadata template (dataset_metadata_template.docx or dataset_metadata_template.pdf) can be used to collaboratively compile metadata before providing it to ESS-DIVE.Since being incorporated into ESS-DIVE’s data submission user interface, ESS-DIVE’s dataset metadata reporting format, has enabled features like automated metadata quality checks, and dissemination of ESS-DIVE datasets onto other data platforms including Google Dataset Search and DataCite.
54 ENVIRONMENTAL SCIENCES↗
CMDV-RRM: Representation of Clouds and Convection across scales in E3SM
In order to address mission-relevant questions, DOE’s Energy Exascale Earth System Model (E3SM) is pushing the limits of horizontal resolution among global Earth System Models (ESMs). The atmospheric resolution in the recently released E3SMv1 is 110 km in the standard configuration, and 25 km in the high-resolution configuration. Furthermore, E3SM is fairly unique among global ESMs with a capability for multiresolution modeling using refined grids in most of its components (atmosphere, land, ocean, sea-ice). This Regionally Refined Model (RRM) capability is critical for future E3SM simulation campaigns that have a strong regional focus to meet DOE's needs in support of energy-sector decisions. RRM grids are also particularly well suited for model evaluation and process-level studies taking advantage of the vast amount of ASR site data collected over the past several decades. The overarching goal of this project was to understand and improve the behavior of clouds and convection in E3SM across these scales using RRM. Key deliverables that resulted from the project are summarized below, with more details provided in the subsequent sections of the report.
54 ENVIRONMENTAL SCIENCES↗
FAST FY 2018 Data Call: A Preliminary Review [Slides]
This presentation provides an overview of fiscal year 2018 federal motor vehicle fleet data at the individual vehicle level during the fall of 2018, a preliminary summary of the data collected, and how the collecting project has reviewed that information for potential quality issues. This presentation will be given at the March 2019 INTERFUEL group meeting, hosted by DOE's Federal Energy Management Program (DOE FEMP). The information is collected through the Federal Automotive Statistical Tool (FAST) project. FAST is a Web-based information system managed by the US Department of Energy, the US General Services Administration, and the Energy Information Administration. FAST is used to collect information about the fleet of motor vehicles used and managed by the Federal government. FAST is developed and maintained by DOE's Idaho National Laboratory (INL).
99 GENERAL AND MISCELLANEOUS↗
Area V: Waste Management and Subsurface Science (FY21-23 Final Report)
The objective of the Waste Management and Subsurface Science Topic Area V project is to evaluate the feasibility and safety of an intermediate-depth borehole for disposal of Israel Atomic Energy Commission (IAEC) nuclear waste. The IAEC nuclear waste is currently stored in above ground and/or in near-surface facilities that provide short-term radiological worker safety but do not provide long-term, full security and safeguards protection for the nuclear material. Disposal of the IAEC nuclear waste several hundred meters below the surface in a sealed borehole would provide long-term security and safeguards due to its depth underground, as well as long-term radiological safety, due to its isolation in a stable geological formation. This project supports the nuclear security and safeguards initiatives of the Science and Technology Working Group of the NNSA/IAEC Memorandum of Understanding (MOU) and addresses the Topic Area V objective and associated goals. The goals for Topic Area V are: (1) Assess the suitability of the vadose zone in the Yamin Plain of the northern Negev Desert, Israel as a host location for intermediate-depth borehole disposal of radioactive waste, (2) Define and refine the necessary characterization needs to better understand the regional climate, structure, and stratigraphy, geomechanics, geochemistry, hydrogeology, and seismicity of the stratigraphic sequence from the surface to the water table in the vicinity of the proposed host location for the disposal borehole(s), and (3) Develop a preliminary plan and schedule, including necessary resources and costs, for a borehole disposal concept and robust and transparent pre-closure and post-closure safety assessments. The safety assessments will require iteration with process level models at both site and regional scales. Upon completion, the information collected by this effort will allow the IAEC to make decisions regarding the viability and applicability of an intermediate depth (<500m) borehole for disposal in the vadose zone of the Yamin Plain. This FY21-23 final report is provided in lieu of a workshop report that was originally planned for delivery in January, 2024. Due to the conflict in Israel and associated delays, the workshop has been delayed to April 2024. The workshop will be held at LLNL but offsite and will switch to hybrid if travel restrictions remain in place. The associated workshop report will be provided as part of a new FY24-26 LCP.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Tribology Test Bed: NiWC3b Cermet, Chloride Salts (Technical Report)
In this project, the best material and processes that we have available now are used build a pump for validation testing and to be able to provide a quotation for a pump for the Gen3 CSP Phase 3 test facility. Enough high temperature and aged material data is collected to be able to safely design a pump with a high level of confidence of good performance. Manufacturing processes for the nano-composite material including spray coating and joining methods are investigated. These processes enable application of this novel material to pump components.
36 MATERIALS SCIENCE↗
Static Corrosion Summary: Static Corrosion Testing, Haynes 230 Recession Rate, Chloride Salts
In this project, the best material and processes that we have available now are used build a pump for validation testing and to be able to provide a quotation for a pump for the Gen3 CSP Phase 3 test facility. Enough high temperature and aged material data is collected to be able to safely design a pump with a high level of confidence of good performance. Manufacturing processes for the nano-composite material including spray coating and joining methods are investigated. These processes enable application of this novel material to pump components.
36 MATERIALS SCIENCE↗
Validation Salt Pump: NiWC3B Cermet, H230, Chloride Salts (Technical Report)
In this project, the best material and processes that we have available now are used build a pump for validation testing and to be able to provide a quotation for a pump for the Gen3 CSP Phase 3 test facility. Enough high temperature and aged material data is collected to be able to safely design a pump with a high level of confidence of good performance. Manufacturing processes for the nano-composite material including spray coating and joining methods are investigated. These processes enable application of this novel material to pump components.
36 MATERIALS SCIENCE↗
Noble Liquid Test Facility at Fermilab
The Noble Liquid Test Facility (NLTF) at Fermilab is a liquid argon detector R\&D facility open to the national and international HEP community. The facility consists of 4 permanent cryostats, ranging from 250L up to 3000L, open space for small open dewar testing, and an optical test stand facility capable of measuring the optical properties of materials and characterizing photon detectors. NLTF’s strongest advantage is its capability to provide ultra-pure LAr in a reliable manner. Its inline filters are capable of filtering all of the three biggest contaminants for standard LAr detectors, O$_2$ and H$_2$O down to $< 1$ppb and N$_2$ $< 1$ppm. This is critical for the users of the test stands as small levels of impurities can dramatically change the efficiency of LArTPCs for the collection of charge and light. The smallest cryostat is mainly used for material testing, a service provided to the international HEP community interested in understanding how the introduction of a specific material might affect the electron lifetime in LAr. The test stands can be equipped with a purity monitor, which allows measuring the electron lifetime in real time, as well as gas sampling and analyzing, and in the near future, local recirculation and filtering. The facility has hosted many successful R\&D projects, which have published their results in well-known journals and talks. A few examples of such projects are: NIR light production in LAr and GAr, the characterization of VUV metalenses, the testing of new filter media capable of filtering N$_2$ from LAr, high voltage studies and direct charge amplification in LAr, and various doping studies.
Blaszczyk, Flor María [Fermilab]↗
Intelligent Component Monitoring for Nuclear Power Plants
Reliability and economy are two major concerns for a nuclear power generation system. Next generation nuclear power reactors are being developed to be more reliable and economic. An effective and efficient surveillance system can generously contribute toward this goal. Recent progress in computer systems and computational tools has made it necessary and possible to upgrade current surveillance/monitoring strategy for better performance. For example, intelligent computing techniques can be applied to develop algorithm that help people better understand the information collected from sensors and thus reduce human error to a new low level. Incidents incurred from human error in nuclear industry are not rare and have been proven costly. The goal of this project is to develop and test an intelligent prognostics methodology for predicting aging effects impacting long-term performance of nuclear components and systems. The approach is particularly suitable for predicting the performance of nuclear reactor systems which have low failure probabilities (e.g., less than 10-6 year-). Such components and systems are often perceived as peripheral to the reactor and are left somewhat unattended. That is, even when inspected, if they are not perceived to be causing some immediate problem, they may not be paid due attention. Attention to such systems normally involves long term monitoring and possibly reasoning with multiple features and evidence, requirements that are not best suited for humans.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
An Approach to Estimate Atmospheric Greenhouse Gas Total Columns Mole Fraction from Partial Column Sampling
This paper presents a new conceptual approach to estimate total column mole fractions of CO 2 and CH 4 using partial column data. It provides a link between airborne in situ and remote sensing observations of greenhouse gases. The method relies on in situ observations, external ancillary sources of information (e.g., atmospheric transport models), and a regression kriging framework. We evaluate our new approach using National Oceanic and Atmospheric Administration's (NOAA's) AirCore program-in situ vertical profiles of CO 2 and CH 4 collected from weather balloons. Our paper shows that under the specific conditions of this study and assumption of unbiasedness, airborne observations up to 6500-9500maltitude are required to achieve comparable total column CO 2 mole fraction uncertainty as the Total Carbon Column Observing Network (TCCON) network provides, given as a precision of the ratio between observed and true total column-integrated mole fraction, assuming 400 ppm XCO 2 (2σ, e.g., 0.8 ppm). If properly calibrated, our approach could be applied to vertical profiles of CO 2 collected from aircraft using a few flask samples, while retaining similar uncertainty level. Our total column CH 4 estimates, by contrast, are less accurate than TCCON's. Aircrafts are not as spatially constrained as TCCON ground stations, so our approach adds value to aircraft-based vertical profiles for evaluating remote sensing platforms.
54 ENVIRONMENTAL SCIENCES↗
All-sky Neutrino Point-source Search with IceCube Combined Track and Cascade Data
Despite extensive efforts, discovery of high-energy astrophysical neutrino sources remains elusive. We present an event-level simultaneous maximum likelihood analysis of tracks and cascades using IceCube data collected from 2008 April 6 to 2022 May 23 to search the whole sky for neutrino sources, and using a source catalog, for coincidence of neutrino emission with gamma-ray emission. This is the first time a simultaneous fit of different detection channels is used to conduct a time-integrated all-sky scan with IceCube. Combining all-sky tracks, with superior pointing power and sensitivity in the northern sky, with all-sky cascades, with good energy resolution and sensitivity in the southern sky, we have developed the most sensitive point-source search to date by IceCube that targets the entire sky. The most significant point in the northern sky aligns with NGC 1068, a Seyfert II galaxy, which, from the catalog search, shows a 3.5σ excess over background after accounting for trials. The most significant point in the southern sky does not align with any source in the catalog and is not significant after accounting for trials. A search for the single most significant Gaussian flare at the locations of NGC 1068, PKS 1424+240, and the southern highest-significance point shows results consistent with expectations for steady emission. Notably, this is the first time that a flare shorter than four years has been excluded as being responsible for NGC 1068’s emergence as a neutrino source. Our results show that combining tracks and cascades when conducting neutrino source searches improves sensitivity and can lead to new discoveries.
Abbasi, R. [Loyola University, Chicago, IL (United↗