Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compatibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Springboard Engineering's Smart Grid Controller for Non-Smart Household Electricity-Consuming Appliances (Final Technical Report)

The Smart Grid opens the door to the development of many companion technologies which will in turn enable the development of a variety of devices for household electricity-consuming appliances that can communicate with it; especially, many major appliance manufacturers (such as Whirlpool and General Electric) have made public commitments to design their appliances to be Smart Grid-compatible over the next several years. Yet during that same time period, customers will purchase many millions of long-lasting appliances which are not compatible with the Smart Grid. This research project's purpose is to bring significant Smart Grid compatibility to previously-installed appliances that were not specifically designed for any Smart Grid communications, in a way that is both economical and attractive for users who want to share in the energy cost savings and reduction of peak power demand opportunities provided by the evolving Smart Grid infrastructure. The focus of this effort is to identify and research smart control solutions which take advantage of the effective strategies of demand-response (DR) communications from utilities [including time-of-day (TOD) and peak-demand pricing options] and function apart from any need for operational changes to be designed into the non-smart appliances. Our Phase I concepts promote technological advancements for enabling devices that shift the available-use time of millions of different appliances which otherwise have no Smart Grid capability. We researched low-cost microcontroller-based ways of creating devices with the ability to: (1) maintain an accurate time and day (with no need for battery backup throughout a power outage); (2) perform two-way wired and wireless communications directly with the utility company's demand management signals, to identify both low-cost time periods as well as critical-reduction periods when the cost of energy use would otherwise be much higher; (3) measure the power usage of the connected non-smart appliance; and (4) remove power for a period of time from the appliance (such as a dehumidifier, portable heater, or pool pump) in response to both time-pricing schedule and critical peak-load information from the utility, or inform the user of a batch-type appliance (such as a clothes dryer or dishwasher) regarding the current cost associated with using the appliance. The new products that could be developed as a result of this research into new consumer-centric features and characteristics includes smart wall outlets, smart outlet power-monitoring adapters, smart load switches and smart remote electric rate indicators associated with the non-smart appliances. Our Phase I goal of determining the feasibility of the above technologies was successful. The objectives were also met of developing concepts for a family of microprocessor-based control/indicator devices that can provide the above capabilities while connected in series between an appliance and its electrical power source and/or while indicating cost-of-use status to the appliance user.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

TRITIUM AGING EFFECTS ON THE FRACTURE TOUGHNESS PROPERTIES OF STAINLESS STEEL BASE METAL AND WELDS

Tritium reservoirs are constructed from welded stainless steel forgings. While these steels are highly resistant to the embrittling effects of hydrogen isotopes and helium from tritium decay; they are not immune. Tritium embrittlement is an enhanced form of hydrogen embrittlement because of the presence of helium-3 from tritium decay which nucleates as nanometer-sized bubbles on dislocations, grain boundaries, and other microstructural defects. Steels with decay helium bubble microstructures are hardened and less able to deform plastically and become more susceptible to embrittlement by hydrogen and its isotopes. Ductility, elongation-to-failure, and fracture toughness are reduced by exposures to tritium and the reductions increase with time as helium-3 builds into the material from tritium permeation and radioactive decay. Material and forging specifications have been developed for optimal material compatibility with tritium. These specifications cover composition, mechanical properties, and select microstructural characteristics like grain size, flow-line orientation, inclusion content, and ferrite distribution. For many years, the forming process of choice for reservoir manufacturing was high-energy-rate forging (HERF), principally because the DOE forging facility owned only HERF hammers. Today, some reservoir forgings are being made that use a conventional, more common process known as press forging (PF or CF). One of the chief differences between the two forging processes is strain rate: Conventional hydraulic or mechanical forging presses deform the metal at 4-8 ft/s, about ten-fold slower than the HERF process. The material specifications continue to provide successful stockpile performance by ensuring that the two forging processes produce similar reservoir microstructures. While long-term life storage tests have demonstrated the general tritium compatibility of tritium reservoirs, fracture-toughness properties of both conventionally forged and high-energy-rate forged are needed for designing and establishing longer tritium-reservoir lifetimes, ranking materials, and, potentially, for qualifying new forging vendors or processes. Measurements on the effects of tritium and decay helium on the fracture toughness properties of CF stainless steels having similar composition, grain size, and mechanical properties to previously studied HERF steels are needed and have not been conducted until now. The compatibility of stainless steel welds with tritium represents another concern for long-term reservoir performance. Weldments have not been well-characterized with respect to tritium embrittlement, although a recent study was completed on the effect of tritium and decay helium on the fracture toughness properties of Type 304L weldments. This study expands the characterization of weldments through measurements of tritium and decay helium effects on the fracture toughness properties of Type 21-6-9 stainless steel. The purpose of this study was to measure and compare the fracture toughness properties of Type 21-6-9 stainless steel for conventional forgings and weldments in the non-charged, hydrogen-charged and tritium-charged-and-aged conditions.

08 HYDROGEN↗

Extreme Carrier Depletion and Superlinear Photoconductivity in Ultrathin Parallel-Aligned ZnO Nanowire Array Photodetectors Fabricated by Infiltration Synthesis

Ultrathin semiconductor nanowires enable high-performance chemical sensors and photodetectors, but their synthesis and device integration by standard complementary metal-oxide-semiconductor (CMOS)-compatible processes remain persistent challenges. This work demonstrates fully CMOS-compatible synthesis and integration of parallel-aligned polycrystalline ZnO nanowire arrays into ultraviolet photodetectors via infiltration synthesis, material hybridization technique derived from atomic layer deposition. The nanowire photodetector features unique, high device performances originating from extreme charge carrier depletion, achieving photoconductive on–off ratios of >6 decades, blindness to visible light, and ultralow dark currents as low as 1 fA, the lowest reported for nanostructure-based photoconductive photodetectors. Surprisingly, the low dark current is invariant with increasing number of nanowires and the photodetector shows unusual superlinear photoconductivity, observed for the first time in nanowires, leading to increasing detector responsivity and other parameters for higher incident light powers. Temperature-dependent carrier concentration and mobility reveal the photoelectrochemical-thermionic emission process at grain boundaries, responsible for the observed unique photodetector performances and superlinear photoconductivity. Here, the results elucidate fundamental processes responsible for photogain in polycrystalline nanostructures, providing useful guidelines for developing nanostructure-based detectors and sensors. Lastly, the developed fully CMOS-compatible nanowire synthesis and device fabrication methods also have potentials for scalable integration of nanowire sensor devices and circuitries.

36 MATERIALS SCIENCE↗

MSSM A-funnel and the galactic center excess: prospects for the LHC and direct detection experiments

The pseudoscalar resonance or “A-funnel” in the Minimal Supersymmetric Standard Model (MSSM) is a widely studied framework for explaining dark matter that can yield interesting indirect detection and collider signals. The well-known Galactic Center excess (GCE) at GeV energies in the gamma ray spectrum, consistent with annihilation of a ≲ 40 GeV dark matter particle, has more recently been shown to be compatible with significantly heavier masses following reanalysis of the background.For this study, we explore the LHC and direct detection implications of interpreting the GCE in this extended mass window within the MSSM A-funnel framework. We find that compatibility with relic density, signal strength, collider constraints, and Higgs data can be simultaneously achieved with appropriate parameter choices. The compatible regions give very sharp predictions of 200-600 GeV CP-odd/even Higgs bosons at low tan β at the LHC and spin-independent cross sections ≈ 10 -11 pb at direct detection experiments. Finally, regardless of consistency with the GCE, this study serves as a useful template of the strong correlations between indirect, direct, and LHC signatures of the MSSM A-funnel region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the relation between the subadditivity cone and the quantum entropy cone

Given a multipartite quantum system, what are the possible ways to impose mutual independence among some subsystems, and the presence of correlations among others, such that there exists a quantum state which satisfies these demands? This question and the related notion of a pattern of marginal independence (PMI) were introduced in [1], and then argued in [2] to be central in the derivation of the holographic entropy cone. Here we continue the general information theoretic analysis of the PMIs allowed by strong subadditivity (SSA) initiated in [1]. We show how the computation of these PMIs simplifies when SSA is replaced by a weaker constraint, dubbed Klein’s condition (KC), which follows from the necessary condition for the saturation of subadditivity (SA). Formulating KC in the language of partially ordered sets, we show that the set of PMIs compatible with KC forms a lattice, and we investigate several of its structural properties. One of our main results is the identification of a specific lower dimensional face of the SA cone that contains on its boundary all the extreme rays (beyond Bell pairs) that can possibly be realized by quantum states. We verify that for four or more parties, KC is strictly weaker than SSA, but nonetheless the PMIs compatible with SSA can easily be derived from the KC-compatible ones. For the special case of 1-dimensional PMIs, we conjecture that KC and SSA are in fact equivalent. To make the presentation self-contained, we review the key ingredients from lattice theory as needed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of D 0 , D + , D$^{*+}$ and D$_s^+$ production in Pb-Pb collisions at $\sqrt{{\mathrm{s}}_{\mathrm{NN}}}=5.02$ TeV

We report measurements of the production of prompt D 0 , D + , D$^{*+}$ and D$_s^+$ mesons in Pb–Pb collisions at the centre-of-mass energy per nucleon-nucleon pair $\sqrt{s}$$_{NN}$ = 5.02 TeV, in the centrality classes 0–10%, 30–50% and 60–80%. The D-meson production yields are measured at mid-rapidity (|$y$| < 0.5) as a function of transverse momentum ($p_T$). The $p_T$ intervals covered in central collisions are: 1 < $p_T$ < 50 GeV/$c$ for D$^0$, 2 < $p_T$ < 50 GeV/$c$ for D$^+$, 3 < $p_T$ < 50 GeV/$c$ for D$^{*+}$, and 4 < $p_T$ < 16 GeV/$c$ for D$_s^+$ mesons. The nuclear modification factors ($R_{AA}$) for non-strange D mesons (D$^0$, D$^+$, D$^{*+}$) show minimum values of about 0.2 for $p_T$ = 6–10 GeV/$c$ in the most central collisions and are compatible within uncertainties with those measured at $\sqrt{{\mathrm{s}}_{\mathrm{NN}}}$ = 2.76 TeV. For D$_s^+$ mesons, the values of $R_{AA}$ are larger than those of non-strange D mesons, but compatible within uncertainties. In central collisions the average $R_{AA}$ of non-strange D mesons is compatible with that of charged particles for $p_T$ > 8 GeV/$c$, while it is larger at lower $p_T$. The nuclear modification factors for strange and non-strange D mesons are also compared to theoretical models with different implementations of in-medium energy loss.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Fast Algorithm for Computing Zigzag Representatives

Zigzag filtrations of simplicial complexes generalize the usual filtrations by allowing simplex deletions in addition to simplex insertions. The barcodes computed from zigzag filtrations encode the evolution of homological features. Although one can locate a particular feature at any index in the filtration using existing algorithms, the resulting representatives may not be compatible with the zigzag: a representative cycle at one index may not map into a representative cycle at its neighbor. For this, one needs to compute compatible representative cycles along each bar in the barcode. It is known that the barcode for a zigzag filtration with m insertions and deletions can be computed $O(m^ω)$ in time, where $ω < 2.373$ is the matrix multiplication exponent. However, it is not known how to compute the compatible representatives so efficiently. For a non-zigzag filtration, the classical matrix-based algorithm provides representatives in $O(m^3)$ time, which can be improved to $O(m^ω)$. However, no known algorithm for zigzag filtrations computes the representatives with the $O(m^3)$ time bound. We present an $O(m^3 n)$ time algorithm for this problem, where $n ≤ m$ is the size of the largest complex in the filtration.

Persistent homology↗

Mica filled polyetherketoneketones for material extrusion 3D printing

Polyetherketoneketone (PEKK) has superior physical properties to most available thermoplastics compatible with material extrusion-based 3D printing, including analogs in the polyaryletherketone (PAEK) family. To date, the performance of fused filament fabrication (FFF) compatible PEKK has been detailed primarily as a function of varying the isomer ratios composing the co-polymer structure. The strategy to form blends or composites with PEKK for FFF is attractive for further tailoring of performance in application, yet has received limited attention. Here, we report the integration of three grades of mica platelets into PEKK at 10% and 30% mass loadings to generate an array of filament feedstocks that were then used to print objects with a simple FFF machine. The effects of mica coating chemistry and surface treatment on the compatibility with PEKK and resulting properties are described. Mica fillers at both loadings have only subtle influence on the FFF relevant melt rheological properties inherent to PEKK. Pigment micas at high loadings can lower the melting temperature of PEKK (up to 19 ºC) without shifting its glass transition temperature and inhibit much of the undesirable crystallization occurring during processing with unfilled PEKK. The printed composites were effectively cold crystallized post-printing, affording crystalline fractions up to 90% relative to unfilled PEKK with increased dimensional stabilities. All micas, when used as fillers in low and high relative PEKK crystallinities, significantly increased the tensile modulus (as high as 126% or to 7.31 GPa) of parts in correlation to the loading. Furthermore, the underlying microstructural features of a printed composite were compared to unfilled PEKK by use of a high-resolution helical micro-computed tomography instrument. Practically, pigment micas can confer a wide range of rich colors to 3D-printed PEKK.

36 MATERIALS SCIENCE↗

Effect of pressure on high-temperature oxidation of Ni alloys in supercritical CO 2 containing impurities

Direct supercritical CO 2 (sCO 2 ) power cycles require structural materials compatible with hot sCO 2 containing high levels of water and oxygen impurities. Chromia-forming Ni-based superalloys, which are leading candidates at temperatures > 600 °C, have shown good compatibility in pure sCO 2 , however potential impurity effects are not well understood. In this report we exposed several commercial Ni-based alloys to 95%CO 2 -4%H 2 O-(1-3)%O 2 at 750 °C and 0.1 or 20 MPa for 2500 h. Protective chromia scales formed in all cases. Nevertheless, water vapor-assisted oxide volatilization clearly occurred at high pressure. The volatilization rates decreased with time, but still represent a potentially serious compatibility issue in real, high-velocity, sCO 2 systems.

36 MATERIALS SCIENCE↗

Lignin-based jet fuel and its blending effect with conventional jet fuel

Sustainable aviation fuels (SAFs) must demonstrate specific physical and chemical properties as well as material compatibility (i.e., seal swell) to be used as an aviation turbine fuel. Several alternative jet fuels incorporated in ASTM D7566 are comprised mainly of n/iso-alkanes and can only be blended up to 50 vol% due to material compatibility and density issues. Prior work illustrated the ability of cycloalkanes to replace aromatics’s role in material compatibility. Here, we report the first archival documentation of a feedstock and chemical process to yield a product composition able to complement existing SAF ASTM D7566 annexes. A lignin-based jet fuel (LJF) blend components is generated and composed of mostly C7-C18 mono, di, and tri-cycloalkanes. The neat LJF was blended with conventional jet fuel at 10 vol% (LJF blend) to simulate an ASTM “Fast Track” evaluation process. Fuel properties that are critical to engine operability (ATSM D4054 Tier 3 & 4) were either predicted or experimental tested based on the volume availability. All LJF blend’s critical properties fall within the experience range of conventional jet fuel, with o-ring swelling exceeding the typical range of conventional fuels. Here, these results in total support the potential use of this LJF pathway to complement other SAF pathways and achieve 100% drop-in SAF.

09 BIOMASS FUELS↗

Spatially adaptive stochastic methods for fluid–structure interactions subject to thermal fluctuations in domains with complex geometries

We develop stochastic mixed finite element methods for spatially adaptive simulations of fluid–structure interactions when subject to thermal fluctuations. To account for thermal fluctuations, we introduce a discrete fluctuation–dissipation balance condition to develop compatible stochastic driving fields for our discretization. We perform analysis that shows our condition is sufficient to ensure results consistent with statistical mechanics. We show the Gibbs–Boltzmann distribution is invariant under the stochastic dynamics of the semi-discretization. To generate efficiently the required stochastic driving fields, we develop a Gibbs sampler based on iterative methods and multigrid to generate fields with O(N) computational complexity. Our stochastic methods provide an alternative to uniform discretizations on periodic domains that rely on Fast Fourier Transforms. To demonstrate in practice our stochastic computational methods, we investigate within channel geometries having internal obstacles and no-slip walls how the mobility/diffusivity of particles depends on location. Our methods extend the applicability of fluctuating hydrodynamic approaches by allowing for spatially adaptive resolution of the mechanics and for domains that have complex geometries relevant in many applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of the correlation between the interfaces and failure behaviors for particle reinforced Mg–Li composites

The interfacial microstructure of SiC{sub p} or YAl{sub 2p} reinforced Mg–14Li–3Al matrix composites was comparatively characterized by scanning electron microscopy and electron probe microanalysis. A nanoindentation combined with scanning electron microscopy technique was used to characterize the interfacial mechanical properties between the reinforcements and matrix. The interfacial strength and failure behaviors for the composites were analyzed from the load–penetration curves and corresponding images. In situ tensile tests were used to observe the fracture and deformation processes with the aid of scanning electron microscopy. The results show that both the chemical and mechanical compatibilities between the YAl{sub 2} particles and LA143 matrix are better than those between the SiC particles and LA143 matrix. The interfacial breakage load for the SiC/LA143 composite is lower than that for the YAl{sub 2}/LA143 composite because of the worse chemical and mechanical compatibilities between the ceramic particles and metal matrix. Interfacial breakage is the main failure mechanism for the SiC/LA143 composite, while the particle breakage and matrix crack are the main failure mechanism for the YAl{sub 2}/LA143 composite. These may be related to the stronger interfacial bonding between the intermetallic particles and metal matrix. - Highlights: • The compatibility for YAl{sub 2} particle with LA143 matrix is better than SiC particle. • The strength of the YAl{sub 2}/LA143 interface is higher than the SiC/LA143 interface. • The main failure behavior for the SiC/LA143 composite is interfacial breakage. • The main failure behavior for YAl{sub 2}/LA143 composite is particle and matrix breakage. • The interfacial strength plays an important role on the composite failure behavior.

36 MATERIALS SCIENCE↗

Sintering behaviors, phases, and dielectric properties of MO-TeO2-V2O5 (M = Ca, Sr, Ba) ultralow temperature ceramics

Highlights: • Introduction of TeO{sub 2} to MO-V{sub 2}O{sub 5} (M = Ca,Sr,Ba) ceramics promoted a M{sub 2}V{sub 2}O{sub 7} phase formation, and obtain excellent dielectric properties and a densification sintering at below 600°. • Chemical compatibility of ULTCC ceramics with aluminum electrode indicated that aluminum did not react with MO-TeO{sub 2}-V{sub 2}O{sub 5} ceramics. • Aluminum easily encouraged the transformation of M{sub 2}V{sub 2}O{sub 7} structures to M{sub 3}(VO{sub 4}){sub 2} structures and other structures under the ultra-low temperature sintering. - Abstract: Influences of TeO{sub 2} on phase evolutions and sintering behaviors of MO-TeO{sub 2}-V{sub 2}O{sub 5} (M = Ca, Sr, Ba) ultralow temperature ceramics were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Dielectric properties of MO-TeO{sub 2}-V{sub 2}O{sub 5} (M = Ca, Sr, Ba) ceramics and their chemical compatibility with an aluminum electrode were also studied. Introducing TeO{sub 2} to MO-V{sub 2}O{sub 5} (M = Ca, Sr, Ba) ceramics obviously decreased the sintering temperature and promoted formation of M{sub 2}V{sub 2}O{sub 7} (M = Ca, Sr, Ba) phases. Also, dielectric properties mainly depend on the amount of TeO{sub 2} added to MO-TeO{sub 2}-V{sub 2}O{sub 5} ceramics. Investigation of chemical compatibility with aluminum shows that aluminum does not react chemically with MO-TeO{sub 2}-V{sub 2}O{sub 5} ceramics; however, aluminum causes transformation of M{sub 2}V{sub 2}O{sub 7} phases to other phases (such as M{sub 3}(VO{sub 4}){sub 2}) to be easier. Sintering temperature of MO-TeO{sub 2}-V{sub 2}O{sub 5} (M = Ca, Sr, Ba) ceramics can be regulated below 600 °C, which is much less than the melting point of aluminum. In addition, MO-TeO{sub 2}-V{sub 2}O{sub 5} (M = Ca, Ba) ceramics maintain quality factors of ∼18,000 GHZ, a dielectric constant of 10–12, and dielectric loss lower than 10{sup −4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiplicity dependence of ϒ production at forward rapidity in pp collisions at $\sqrt{s}$ = 13 TeV

The measurement of ϒ(1S), ϒ(2S), and ϒ(3S) yields as a function of the charged-particle multiplicity density, d N ch /d η , using the ALICE experiment at the LHC, is reported in pp collisions at √s = 13 TeV. The Υ meson yields are measured at forward rapidity (2.5 < y < 4) in the dimuon decay channel, whereas the charged-particle multiplicity is defined at central rapidity (| η | <1). Both quantities are divided by their average value in minimum bias events to compute the self-normalized quantities. The increase of the self-normalized ϒ(1S), ϒ(2S), and ϒ(3S) yields is found to be compatible with a linear scaling with the self-normalized d N ch /d η , within the uncertainties. The self-normalized yield ratios of excited-to-ground ϒ states are compatible with unity within uncertainties. Similarly, the measured double ratio of the self-normalized ϒ(1S) to the self-normalized J/ ψ yields, both measured at forward rapidity, is compatible with unity for self-normalized charged-particle multiplicities beyond one. The measurements are compared with theoretical predictions incorporating initial or final state effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A high-temperature heat flux sensor using the transverse Seebeck effect in elemental rhenium

Heat flux sensors compatible with hot environments are critical to advance aerospace, materials, and energy generation technologies that cope with extreme thermal conditions. In this work, we report on the development and characterization of a high-temperature heat flux sensor using the transverse Seebeck effect in rhenium single crystals. The sensor leverages refractory alloys and ceramics compatible with temperatures exceeding 1000 °C. The heat flux sensor was characterized from room temperature to 500 °C using a temperature-controlled calibration facility. At constant temperature, the sensor’s voltage output is linear with respect to the absorbed heat flux. The responsivity of the sensor varies with temperature, from 1.3 μV/(W/cm 2 ) at room temperature to −3.2 μV/(W/cm 2 ) at 500 °C, increasing monotonically in magnitude after changing sign from positive to negative at approximately 300 °C. The experimental results are in good agreement with analytical predictions of the sensor’s temperature-dependent responsivity, which suggest a further increase in magnitude up to −7.4 μV/(W/cm 2 ) at 1000 °C. These results highlight the unique characteristics of rhenium as a TSE transducer. The design offers compatibility with a wide range of operating temperatures and yields a measurement sensitivity that increases as the environmental conditions become more challenging.

20 FOSSIL-FUELED POWER PLANTS↗

Crystallization Modes of Poly(3-dodecylthiophene)-Based Block Copolymers Depend on Regioregularity and Morphology

Conjugated block copolymers (BCPs) can self-assemble into highly ordered nanostructures in a melt state. Yet, when cooled below the melting temperature, crystal growth can disrupt the self-assembled structure and produce a poorly ordered fibrillar texture. We determine that crystallization modes of conjugated BCPs based on poly(3-dodecylthiophene) (P3DDT) and poly(2-vinylpyridine) (P2VP) can be tuned through P3DDT regioregularity (RR), as this attribute controls the melting temperature and crystallization rates of P3DDT. When RR is low (7080%), crystallization is observed at temperatures near or below the glass transition of P2VP, so crystal growth is largely confined by the glassy cylindrical or lamellar BCP structure. When RR is high (94%), crystallization occurs at 40 K above the glass transition of P2VP, so there is no longer a restriction of glassy domains. Importantly, crystal growth remains confined by the rubbery P2VP lamellae, but breaks through the rubbery P2VP cylinders. This morphology-dependent behavior is attributed to geometric compatibility of P3DDT crystal growth and the self-assembled symmetry. In a lamellar phase, the P3DDT chain orientations at the P3DDT- block -P2VP interface are compatible with crystal growth, and both the alkyl-stacking and $\pi\pi$ growth directions are unrestricted within a lamellar sheet. In a cylindrical phase, the radial orientation of P3DDT chains at the P3DDT- block -P2VP interface is not compatible with crystal growth, and the hexagonal close-packed symmetry only allows for one direction of unrestricted crystal growth. Significantly, these studies demonstrate that tuning RR of polyalkylthiophenes can open up multiple crystallization modes with the same monomer chemistries and block lengths, thereby decoupling the parameters that govern classical BCP self-assembly and crystal growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Coating to Dopant: How the Transition Metal Composition Affects Alumina Coatings on Ni-Rich Cathodes

Surface alumina coatings have been shown to be an effective way to improve the stability and cyclability of cathode materials. However, a detailed understanding of the relationship between the surface coatings and the bulk layered oxides is needed to better define the critical cathode–electrolyte interface. In this work, we systematically studied the effect of the composition of Ni-rich LiNi x Mn y Co 1–x–y O 2 (NMC) on the surface alumina coatings. Changing cathode composition from LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532) to LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) was found to facilitate the diffusion of surface alumina into the bulk after high-temperature annealing. By use of a variety of spectroscopic techniques, Al was seen to have a high bulk compatibility with higher Ni/Co content, and low bulk compatibility was associated with Mn in the transition metal layer. It was also noted that the cathode composition affected the observed morphology and surface chemistry of the coated material, which has an effect on electrochemical cycling. The presence of a high surface Li concentration and strong alumina diffusion into the bulk led to a smoother surface coating on NMC811 with no excess alumina aggregated on the surface. Structural characterization of pristine NMC particles also suggests surface Co segregation, which may act to mediate the diffusion of the Al from the surface to the bulk. The diffusion of Al into the bulk was found to be detrimental to the protection function of surface coatings leading to poor overall cyclability, indicating the importance of compatibility between surface coatings and bulk oxides on the electrochemical performance of coated cathode materials.In conclusion, these results are important in developing a better coating method for synthesis of next-generation cathode materials for lithium-ion batteries.

36 MATERIALS SCIENCE↗