Search NASA⌕ Search

SEARCH · Search NASA

Results for “DFT calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Defying Thermodynamics: Stabilization of Alane Within Covalent Triazine Frameworks for Reversible Hydrogen Storage

The highly unfavorable thermodynamics of direct aluminum hydrogenation can be overcome by stabilizing alane within a nanoporous bipyridine-functionalized covalent triazine framework (AlH 3 @CTF-bipyridine). This material and the counterpart AlH 3 @CTF-biphenyl rapidly desorb H 2 between 95 and 154°C, with desorption complete at 250°C. Sieverts measurements, 27 Al MAS NMR and 27 Al{ 1 H} REDOR experiments, and computational spectroscopy reveal that AlH 3 @CTF-bipyridine dehydrogenation is reversible at 60°C under 700 bar hydrogen, >10 times lower pressure than that required to hydrogenate bulk aluminum. DFT calculations and EPR measurements support an unconventional mechanism whereby strong AlH 3 binding to bipyridine results in single-electron transfer to form AlH 2 (AlH 3 ) n clusters. Here the resulting size-dependent charge redistribution alters the dehydrogenation/rehydrogenation thermochemistry, suggesting a novel strategy to enable reversibility in high-capacity metal hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site‐Specific Reduction‐Induced Hydrogenation of a Helical Bilayer Nanographene with K and Rb Metals: Electron Multiaddition and Selective Rb + Complexation

Abstract The chemical reduction of π‐conjugated bilayer nanographene 1 (C 138 H 120 ) with K and Rb in the presence of 18‐crown‐6 affords [K + (18‐crown‐6)(THF) 2 ][{K + (18‐crown‐6)} 2 (THF) 0.5 ][C 138 H 122 3− ] ( 2 ) and [Rb + (18‐crown‐6) 2 ][{Rb + (18‐crown‐6)} 2 (C 138 H 122 3− )] ( 3 ). Whereas K + cations are fully solvent‐separated from the trianionic core thus affording a “naked” 1 .3 − anion, Rb + cations are coordinated to the negatively charged layers of 1 .3 − . According to DFT calculations, the localization of the first two electrons in the helicene moiety leads to an unprecedented site‐specific hydrogenation process at the carbon atoms located on the edge of the helicene backbone. This uncommon reduction‐induced site‐specific hydrogenation provokes dramatic changes in the (electronic) structure of 1 as the helicene backbone becomes more compressed and twisted upon chemical reduction, which results in a clear slippage of the bilayers.

Zhou, Zheng↗

Formation of a Strong Heterogeneous Aluminum Lewis Acid on Silica

Abstract Al(OC(CF 3 ) 3 )(PhF) reacts with silanols present on partially dehydroxylated silica to form well‐defined ≡SiOAl(OC(CF 3 ) 3 ) 2 (O(Si≡) 2 ) ( 1 ). 27 Al NMR and DFT calculations with a small cluster model to approximate the silica surface show that the aluminum in 1 adopts a distorted trigonal bipyramidal coordination geometry by coordinating to a nearby siloxane bridge and a fluorine from the alkoxide. Fluoride ion affinity (FIA) calculations follow experimental trends and show that 1 is a stronger Lewis acid than B(C 6 F 5 ) 3 and Al(OC(CF 3 ) 3 )(PhF) but is weaker than Al(OC(CF 3 ) 3 ) and i Pr 3 Si + . Cp 2 Zr(CH 3 ) 2 reacts with 1 to form [Cp 2 ZrCH 3 ][≡SiOAl(OC(CF 3 ) 3 ) 2 (CH 3 )] ( 3 ) by methide abstraction. This reactivity pattern is similar to reactions of organometallics with the proposed strong Lewis acid sites present on Al 2 O 3 .

Samudrala, Kavyasripriya K.↗

High‐Field NMR, Reactivity, and DFT Modeling Reveal the γ‐Al 2 O 3 Surface Hydroxyl Network**

Abstract Aluminas are strategic materials used in many major industrial processes, either as catalyst supports or as catalysts in their own right. The transition alumina γ‐Al 2 O 3 is a privileged support, whose reactivity can be tuned by thermal activation. This study provides a qualitative and quantitative assessment of the hydroxyl groups present on the surface of γ‐Al 2 O 3 at three different dehydroxylation temperatures. The principal [AlOH] configurations are identified and described in unprecedented detail at the molecular level. The structures were established by combining information from high‐field 1 H and 27 Al solid‐state NMR, IR spectroscopy and DFT calculations, as well as selective reactivity studies. Finally, the relationship between the hydroxyl structures and the molecular‐level structures of the active sites in catalytic alkane metathesis is discussed.

Merle, Nicolas↗

Creating Frustrated Lewis Pairs in Defective Boron Carbon Nitride for Electrocatalytic Nitrogen Reduction to Ammonia

Abstract The electrocatalytic nitrogen reduction reaction (NRR) on metal‐free catalysts is an attractive alternative to the industrial Haber–Bosch process. However, the state‐of‐the‐art metal‐free electrocatalysts still suffer from low Faraday efficiencies and low ammonia yields. Herein, we present a molecular design strategy to develop a defective boron carbon nitride (BCN) catalyst with the abundant unsaturated B and N atoms as Lewis acid and base sites, which upgrades the catalyst from a single “Lewis acid catalysis” to “frustrated Lewis pairs (FLPs) catalysis.” 14 N 2 / 15 N 2 exchange experiments and density functional theory (DFT) calculations reveal that FLPs can adsorb an N 2 molecule to form a six‐membered ring intermediate, which enables the cleavage of N 2 via a pull–pull effect, thereby significantly reducing the energy barrier to −0.28 eV. Impressively, BCN achieves a high Faraday efficiency of 18.9 %, an ammonia yield of 20.9 μg h −1 mg −1 cat. , and long‐term durability.

Lin, Wenwen↗

Hydrogen Evolution on Electrode‐Supported Pt n Clusters: Ensemble of Hydride States Governs the Size Dependent Reactivity

Abstract We report the size‐dependent activity and stability of supported Pt 1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with size‐dependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (≈2 H/Pt). An ensemble‐based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. The stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential‐ and adsorbate‐coverage‐dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.

Zhang, Zisheng↗

Porous and Water Stable 2D Hybrid Metal Halide with Broad Light Emission and Selective H 2 O Vapor Sorption

Abstract In this work we report a strategy for generating porosity in hybrid metal halide materials using molecular cages that serve as both structure‐directing agents and counter‐cations. Reaction of the [2.2.2] cryptand (DHS) linker with Pb II in acidic media gave rise to the first porous and water‐stable 2D metal halide semiconductor (DHS) 2 Pb 5 Br 14 . The corresponding material is stable in water for a year, while gas and vapor‐sorption studies revealed that it can selectively and reversibly adsorb H 2 O and D 2 O at room temperature (RT). Solid‐state NMR measurements and DFT calculations verified the incorporation of H 2 O and D 2 O in the organic linker cavities and shed light on their molecular configuration. In addition to porosity, the material exhibits broad light emission centered at 617 nm with a full width at half‐maximum (FWHM) of 284 nm (0.96 eV). The recorded water stability is unparalleled for hybrid metal halide and perovskite materials, while the generation of porosity opens new pathways towards unexplored applications ( e.g . solid‐state batteries) for this class of hybrid semiconductors.

Azmy, Ali↗

Evidence of a Uranium‐Paddlewheel Node in a Catecholate‐Based Metal–Organic Framework

Abstract The interactions between uranium and non‐innocent organic species are an essential component of fundamental uranium redox chemistry. However, they have seldom been explored in the context of multidimensional, porous materials. Uranium‐based metal–organic frameworks (MOFs) offer a new angle to study these interactions, as these self‐assembled species stabilize uranium species through immobilization by organic linkers within a crystalline framework, while potentially providing a method for adjusting metal oxidation state through coordination of non‐innocent linkers. We report the synthesis of the MOF NU‐1700 , assembled from U 4+ ‐paddlewheel nodes and catecholate‐based linkers. We propose this highly unusual structure, which contains two U 4+ ions in a paddlewheel built from four linkers—a first among uranium materials—as a result of extensive characterization via powder X‐ray diffraction (PXRD), sorption, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), in addition to density functional theory (DFT) calculations.

Knapp, Julia G.↗

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two‐Dimensional Metal–Organic Frameworks

Abstract Metal–organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M−HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time‐resolved terahertz spectroscopy, optical transient absorption spectroscopy, X‐ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through‐space hole transport mechanism through the interlayer sheet π–π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu−HHTP MOF is found to be 65.5 S m −1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

Wang, Denan↗

Significant Roles of Surface Hydrides in Enhancing the Performance of Cu/BaTiO 2.8 H 0.2 Catalyst for CO 2 Hydrogenation to Methanol

Abstract Tuning the anionic site of catalyst supports can impact reaction pathways by creating active sites on the support or influencing metal‐support interactions when using supported metal nanoparticles. This study focuses on CO 2 hydrogenation over supported Cu nanoparticles, revealing a 3‐fold increase in methanol yield when replacing oxygen anions with hydrides in the perovskite support (Cu/BaTiO 2.8 H 0.2 yields ~146 mg/h/gCu vs. Cu/BaTiO 3 yields ~50 mg/h/gCu). The contrast suggests that significant roles are played by the support hydrides in the reaction. Temperature programmed reaction and isotopic labelling studies indicate that BaTiO 2.8 H 0.2 surface hydride species follow a Mars van Krevelen mechanism in CO 2 hydrogenation, promoting methanol production. High‐pressure steady‐state isotopic transient kinetic analysis (SSITKA) studies suggest that Cu/BaTiO 2.8 H 0.2 possesses both a higher density and more active and selective sites for methanol production compared to Cu/BaTiO 3 . An operando high‐pressure diffuse reflectance infrared spectroscopy (DRIFTS)‐SSITKA study shows that formate species are the major surface intermediates over both catalysts, and the subsequent hydrogenation steps of formate are likely rate‐limiting. However, the catalytic reactivity of Cu/BaTiO 2.8 H 0.2 towards the formate species is much higher than Cu/BaTiO 3 , likely due to the altered electronic structure of interface Cu sites by the hydrides in the support as validated by density functional theory (DFT) calculations.

He, Yang↗

A Semi‐Automated, High‐Throughput Approach for the Synthesis and Identification of Highly Photo‐Cytotoxic Iridium Complexes

Abstract The discovery of new compounds with pharmacological properties is usually a lengthy, laborious and expensive process. Thus, there is increasing interest in developing workflows that allow for the rapid synthesis and evaluation of libraries of compounds with the aim of identifying leads for further drug development. Herein, we apply combinatorial synthesis to build a library of 90 iridium(III) complexes (81 of which are new) over two synthesise‐and‐test cycles, with the aim of identifying potential agents for photodynamic therapy. We demonstrate the power of this approach by identifying highly active complexes that are well‐tolerated in the dark but display very low nM phototoxicity against cancer cells. To build a detailed structure–activity relationship for this class of compounds we have used density functional theory (DFT) calculations to determine some key electronic parameters and study correlations with the experimental data. Finally, we present an optimised semi‐automated synthesise‐and‐test protocol to obtain multiplex data within 72 hours.

Kench, Timothy↗

Facile Access to Organostibines via Selective Organic Superbase Catalyzed Antimony‐Carbon Protonolysis

Abstract The selective formation of antimony‐carbon bonds via organic superbase catalysis under metal‐ and salt‐free conditions is reported. This novel approach utilizes electron‐deficient stibine, Sb(C 6 F 5 ) 3 , to give upon base‐catalyzed reactions with weakly acidic aromatic and heteroaromatic hydrocarbons access to a range of new aromatic and heteroaromatic stibines, respectively, with loss of C 6 HF 5 . Also, the significantly less electron‐deficient stibines, Ph 2 SbC 6 F 5 and PhSb(C 6 F 5 ) 2 smoothly underwent base‐catalyzed exchange reactions with a range of terminal alkynes to generate the stibines of formulae PhSb(C≡CPh) 2 , and Ph 2 SbC≡CR [R=C 6 H 5 , C 6 H 4 ‐NO 2 , COOEt, CH 2 Cl, CH 2 NEt 2 , CH 2 OSiMe 3 , Sb(C 6 H 5 ) 2 ], respectively. These formal substitution reactions proceed with high selectivity as only the C 6 F 5 groups serve as a leaving group to be liberated as C 6 HF 5 upon formal proton transfer from the alkyne. Kinetic studies of the base‐catalyzed reaction of Ph 2 SbC 6 F 5 with phenyl acetylene to form Ph 2 SbC≡CPh and C 6 HF 5 suggested the empirical rate law to exhibit a first‐order dependence with respect to the base catalyst, alkyne and stibine. DFT calculations support a pathway proceeding via a concerted σ‐bond metathesis transition state, where the base catalyst activates the Sb‐C 6 F 5 bond sequence through secondary bond interactions.

Culvyhouse, Jacob↗

Rationalizing Acidic Oxygen Evolution Reaction over IrO 2 : Essential Role of Hydronium Cation

Abstract The development of active, stable, and more affordable electrocatalysts for acidic oxygen evolution reaction (OER) is of great importance for the practical application of electrolyzers and the advancement of renewable energy conversion technologies. Currently, IrO 2 is the only catalyst with high stability and activity, but a high cost. Further optimization of the catalyst is limited by the lack of understanding of catalytic behaviors at the acid‐IrO 2 interface. Here, in strong interaction with the experiment, we develop an explicit model based on grand‐canonical density function theory (GC‐DFT) calculations to describe acidic OER over IrO 2 . Compared to the explicit models reported previously, hydronium cations (H 3 O + ) are introduced at the electrochemical interface in the current model. As a result, a variation in stable IrO 2 surface configuration under the OER operating condition from previously proposed complete *O‐coverage to a mixture coverage of *OH and *O is revealed, which is well supported by in situ Raman measurements. In addition, the accuracy of predicted overpotential is increased in comparison with the experimentally measured. More importantly, an alteration of the potential limiting step from previously identified *O→*OOH to *OH→*O is observed, which opens new opportunities to advance the IrO 2 ‐based catalysts for acidic OER.

Mou, Tianyou↗

Enhancing Acidic Oxygen Evolution Activity by Controlling Oxidation State of Iridium

Iridium oxides with high oxidation states have been reported to be effective in enhancing the acidic oxygen evolution reaction (OER) performance. Herein, we develop ultrasmall IrO x nanoparticles (NPs) over titanium nitride (TiN), which undergoes surface oxidation under oxidative conditions to form oxygen-modified TiN (oxi-TiN), enabling the formation of highly oxidized Ir δ+ (δ > 4). This IrO x /oxi-TiN catalyst delivers higher Ir mass activity than commercial IrO 2 , while comparable stability is maintained. The superior OER activity of IrO x /oxi-TiN is further demonstrated in a proton exchange membrane water electrolyzer (PEMWE), requiring only 1.88 V to reach 3 A cm −2 , achieving the U.S. Department of Energy 2025 target (1.90 V at 3 A cm −2 ). In situ X-ray absorption spectroscopy (XAS) confirms that the superior OER activity of IrO x /oxi-TiN originates from highly oxidized Ir δ+ under OER conditions. Further, density functional theory (DFT) calculations reveal a general correlation between the oxidation state of Ir and OER overpotential. Specifically, the introduction of interfacial oxygen at the Ir/TiN interface increases the oxidation state of deposited Ir δ+ from δ < 4 to δ > 4, decreasing the OER overpotential. This study highlights the critical role of high oxidation states of Ir δ+ in enhancing OER activity, providing guidance for the development of advanced acidic OER catalysts.

In situ measurements↗

The Antimony-Based Type I Clathrate compounds Cs8Cd18Sb28 and Cs8Zn18Sb28**

The title compounds lie in a new region of phase space for such a structure, and have stoichiometries in accord with a classical Zintl phase formulation. The small semiconductor gaps indicated by DFT calculations are also supported by their diamagnetic susceptibilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

C20H4(C4F8)3: A Fluorine-Containing Annulated Corannulene that Is a Better Electron Acceptor Than C60

There has been increased interest in the design and applications of small polyaromatic molecules for energy conversion and storage, organic transistors and OLEDs, and other emerging areas of modern technology.[1] In particular, functionalized polycyclic aromatic hydrocarbons (PAHs) were shown to demonstrate excellent electrical mobilities, in organic thin-film transistors, in some cases even under ambient conditions.[2] It has been suggested that air stability of such organic materials is correlated with their electronic properties, and more specifically, with a high electron affinity.[3] Until recently, geodesic PAHs, such as corannulene[4] or sumanene[5] and their numerous derivatives have not been seriously considered for optoelectronic applications because (i) they typically possess very low electron affinities (e.g., EA(C20H10) = 0.5(1) eV),[6] and (ii) laborious multistep syntheses with moderate-to-low yields made them practically unavailable for such studies.[7] Although the low availability of sumanene remains unchanged, significant progress has been made lately in the large-scale synthesis of corannulene.[8] Furthermore, our recent work demonstrated that functionalization of corannulene molecule with electron withdrawing groups (EWGs) results in drastic enhancement of its electron acceptor properties.[9] In particular, for trifluoromethylated derivative C20H5(CF3)5, a 950 mV positive shift in the reduction potential relative to the parent C20H10 was measured. We also predicted that other EWGs, including halogen atoms or cyanide group, could be used to enhance electron affinity of corannulene. Nearly linear correlation between the number of EWGs and the electron affinity (reduction potential) of the corresponding EWG-substituted corannulene molecules that was demonstrated by our DFT calculations, and, more recently, confirmed for C20H10-x(CF3)x=2,3,[10] provides a good tool for design of the molecules with desired electronic properties. Here, we report the first synthesis, structure, and electronic properties (in solution and in the gas phase) of the derivative of corannulene, which has a higher electron affinity (EA) than a well-studied acceptor fullerene C60

Environmental Molecular Sciences Laboratory↗

A Carbene-Rich but Carbonyl-Poor [Ir 6 (IMe) 8 (CO) 2 H 14 ] 2+ Polyhydride Cluster as a Deactivation Product from Catalytic Glycerol Dehydrogenation

The title cluster, a deactivation product in the catalytic dehydrogenation of glycerol, was characterized by XRD, DFT calculations, HRMS, FTIR spectroscopy, and NMR spectroscopy. Experimental/computational studies located the 14 H ligands, and all 1H and 13C{1H} NMR resonances were assigned. The structure contains an unprecedented Ir6H14 core with two CO and eight IMe ligands.

catalysis (homogeneous), catalysis (heterogeneous)↗

Diselenophosphate-Induced Conversion of an Achiral [Cu 20 H 11 {S 2 P(O i Pr) 2 } 9 ] into a Chiral [Cu 20 H 11 {Se 2 P(O i Pr) 2 } 9 ] Polyhydrido Nanocluster

A polyhydrido copper nanocluster, [Cu 20 H 11 {Se 2 P(OiPr) 2 } 9 ] (2 H ), which exhibits an intrinsically chiral inorganic core of C-3 symmetry, was synthesized from achiral [Cu 20 H 11 {S 2 P(OiPr) 2 } 9 ] (1(H)) of C-3h symmetry by a ligand-exchange method. Likewise, the structure has a distorted cuboctahedral Cu-13 core, two triangular faces of which are capped along the C-3 axis, one by a Cu-6 cupola and the other by a single Cu atom. The Cu-20 framework is further stabilized by 9 diselenophosphate and 11 hydride ligands. The number of hydride, phosphorus, and selenium resonances and their splitting patterns in multinuclear NMR spectra of 2(H) indicate that the chiral Cu20H11 core retains its C-3 symmetry in solution. Moreover, the 11 hydride ligands were located by neutron diffraction experiments and shown to be capping (3)-H and interstitial (5)-H ligands (in square-pyramidal and trigonal-bipyramidal cavities), as supported by DFT calculations on [Cu 20 H 11 (Se 2 PH 2 ) 9 ] (2 H ') as a simplified model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗