Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Aerothermodynamics of a 1.6-m-diameter sphere in hypersonic rarefied flow

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for hypersonic rarefied flow about a 1.6-m-diameter sphere. The flow conditions considered are those experienced by a typical satellite in orbit or by a space vehicle during entry. The altitude range considered is that from 90 to 200 km, which encompasses the near continuum, transitional and free-molecular flow regimes. A freestream velocity of 7.5 km/s is assumed in the simulations. The results show that transitional effects are significant at all altitudes below 200 km, but at 200 km the flow about the sphere attains the free-molecular limit. Very little chemical activity is present above 120 km. Both the stagnation point heat transfer and the sphere drag approach their respective free molecule values at 200 km. Results highlight the thermal and chemical nonequilibrium nature of the flowfield. Nonequilibrium effects on the surface heating and body drag are also investigated.

Dogra, Virendra K.↗

Nonlinear interaction of a detonation/vorticity wave

The interaction of an oblique, over driven detonation wave with a vorticity disturbance is investigated by a direct two-dimensional numerical simulation using a multi-domain, finite-difference solution of the compressible Euler equations. The results are compared to those of linear theory, which predict that the effect of exothermicity on the interaction is relatively small except possibly near a critical angle where linear theory no longer holds. It is found that the steady-state computational results agree with the results of linear theory. However, for cases with incident angle near the critical angle, moderate disturbance amplitudes, and/or sudden transient encounter with a disturbance, the effects of exothermicity are more pronounced than predicted by linear theory. Finally, it is found that linear theory correctly determines the critical angle.

Lasseigne, D. G.↗

Hypersonic rarefied flow past spheres including wake structure

Results of a numerical study using the direct simulation Monte Carlo method are presented for hypersonic rarefied flow past spheres. The flow conditions considered are those corresponding to low density wind tunnel test conditions. The set of the experimental conditions for the calculations encompasses the transitional to near-continuum flow regimes. Comparison of the calculated drag with experimental results shows good agreement to well within the experimental error. Particular attention is focused on the wake structure. Calculations show that the wake is very rarefied with considerable thermal nonequilibrium for all the cases considered. No flow separation is observed in the wake for the near-continuum case where a vortex has been predicted by Navier-Stokes type calculations.

Dogra, Virendra K.↗

CFD analysis on control of secondary losses in STME LOX turbines with endwall fences

The rotor blade in the newly designed LOX turbine for the future Space Transportation Main Engine (STME) has a severe flow turning angle, nearly 160 degrees. The estimated secondary loss in the rotor alone accounts for nearly 50 percent of the total loss over the entire stage. To reduce such a loss, one of the potential methods is to use fences attached on the turbine endwall (hub). As a prelude to examining the effects of endwall fence with actual STME turbine configuration, the present study focuses on similar issues with a different, but more generic, geometry - a rectangular duct with a 160-degree bend. The duct cross-section has a 2-to-1 aspect ratio and the radii of curvature for the inner and outer wall are 0.25 and 1.25 times the duct width, respectively. The present emphasis lies in examining the effects of various fence-length extending along the streamwise direction. The flowfield is numerically simulated using the FDNS code developed earlier by Wang and Chen. The FDNS code is a pressure based, finite-difference, Navier-Stokes equations solver.

Chyu, Mingking K.↗

Hypersonic rarefied wake characterization

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for hypersonic rarefied flow over an aeroassisted space transfer vehicle (ASTV). The emphasis of the study is the characterization of the near wake region which includes the ASTV payload. The study covered the transitional flow regime from near continuum to free molecular. Calculations show that the character of the near wake is significantly affected by the presence of the payload. Flow separation occurs when an afterbody is present throughout the transitional flow regime. In contrast, when no afterbody is present, no separation is observed until the flow approaches continuum.

Brewer, E. B.↗

Kinetic relaxation of a non-Maxwellian monatomic gas in a state of gross rest

The kinetic relaxation of a monatomic gas in a state of gross rest is studied by use of Maxwell's second-order moment equation. The molecular models considered range from the hard sphere to the Maxwell molecule. The development is exact for an ellipsoidal distribution and becomes a good approximation for more general distributions. The results show that the relaxation of second-order moments is nearly exponential for power-law molecules and that the characteristic time mu/p appears as the principal controlling parameter while the power-law constant plays a secondary role. Comparisons between results of numerical simulations using Bird's direct simulation Monte Carlo method and theory show excellent agreement for both hard-sphere and Maxwell molecules.

Baganoff, D.↗

Hypersonic blunt body wake computations using DSMC and Navier-Stokes solvers

Numerical results obtained with direct simulation Monte Carlo (DSMC) and Navier-Stokes methods are presented for Mach 20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are considered with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is on the wake structure: how does the wake structure change as a function of rarefaction, what are the afterbody levels of heating, and to what limits are continuum models realistic as rarefaction in the wake is progressively increased. Calculations are made with and without an afterbody sting. Results for the afterbody sting are emphasized in anticipation of an experimental study for the current flow conditions and model configuration. The Navier-Stokes calculations were made with and without slip boundary conditions. Comparisons of the results obtained with the two simulation methodologies are made for both flowfield structure and surface quantities.

Moss, James N.↗

Laser altimetry simulator. Version 3.0: User's guide

A numerical simulator of a pulsed, direct detection laser altimeter has been developed to investigate the performance of space-based laser altimeters operating over surfaces with various height profiles. The simulator calculates the laser's optical intensity waveform as it propagates to and is reflected from the terrain surface and is collected by the receiver telescope. It also calculates the signal and noise waveforms output from the receiver's optical detector and waveform digitizer. Both avalanche photodiode and photomultiplier detectors may be selected. Parameters of the detected signal, including energy, the 50 percent rise-time point, the mean timing point, and the centroid, can be collected into histograms and statistics calculated after a number of laser firings. The laser altimeter can be selected to be fixed over the terrain at any altitude. Alternatively, it can move between laser shots to simulate the terrain profile measured with the laser altimeter.

Abshire, James B.↗

Asymptotic Behavior of Ensemble-Averaged Linear Disturbances in Homogeneous Shear Flow

In order to expand the predictive capability of single-point turbulence closure models too account for the early-stage transition regime, a methodology for the formulation and calibration of model equations for the ensemble-averaged disturbance kinetic energy and energy dissipation rate is presented. The calibration is based on homogeneous shear flow where disturbances can be described by rapid distort,ion theory (RDT). The relationship between RDT and linear stability theory is exploit,c d in order to obtain a closed set, of modeled equations. The linear disturbance equations are solved directly so that, the numerical simulation yields a database from which the closure coefficient,s in the ensemble-averaged disturbance equations can he determined.

Thacker, W. D.↗

Disturbance Dynamics in Transitional and Turbulent Flows

In order to expand the predictive capability of single-point turbulence closure models to account for the early-stage transition regime, a methodology for the formulation and calibration of model equations for the ensemble-averaged disturbance kinetic energy and energy dissipation rate is presented. First the decay of laminar disturbances and turbulence in mean shear-free flows is studied. In laminar flows, such disturbances are linear superpositions of modes governed by the Orr-Sommerfeld equation. In turbulent flows, disturbances are described through transport equations for representative mean quantities. The link between a description based on a deterministic evolution equation and a probability based mean transport equation is established. Because an uncertainty in initial conditions exists in the laminar as well as the turbulent regime, a probability distribution must be defined even in the laminar case. Using this probability distribution, it is shown that the exponential decay of the linear modes in the laminar regime can be related to a power law decay of both the (ensemble) mean disturbance kinetic energy and the dissipation rate. The evolution of these mean disturbance quantities is then described by transport equations similar to those for the corresponding turbulent decaying flow. Second, homogeneous shear flow, where disturbances can be described by rapid distortion theory (RDT), is studied. The relationship between RDT and linear stability theory is exploited in order to obtain a closed set of modeled equations. The linear disturbance equations are solved directly so that the numerical simulation yields a database from which the closure coefficients in the ensemble-averaged disturbance equations can be determined.

Grosch, Chester E.↗

Modeling the Dynamics of Ensemble-Averaged Linear Disturbances in Homogeneous Shear Flow

In order to expand the predictive capability of single-point turbulence closure models to account for the early-stage transition regime, a methodology for the formulation and calibration of model equations for the ensemble-averaged disturbance kinetic energy and energy dissipation rate is presented. The calibration is based on homogeneous shear flow where disturbances can be described by rapid distortion theory (RDT). The relationship between RDT and linear stability theory is exploited in order to obtain a closed set of modeled equations. The linear disturbance equations are solved directly so that the numerical simulation yields a database from which the closure coefficients in the ensemble-averaged disturbance equations can be determined. Key words: transition/turbulence modeling, homogeneous shear, rapid distortion theory.

Thacker, W. D.↗

Lunar and Planetary Science XXXV: Martian Aeolian and Mass Wasting Processes: Blowing and Flowing

The session Martian Aeolian and Mass Wasting Processes: BLowing and Flowing included the following topics: 1) Three Decades of Martian Surface Changes; 2) Thermophysical Properties of Isidis Basin, Mars; 3) Intracrater Material in Eastern Arabia Terra: THEMIS, MOC, and MOLA Analysis of Wind-blown Deposits and Possible High-Inertia Source Material; 4) Thermal Properties of Sand from TES and THEMIS: Do Martian Dunes Make a Good Control for Thermal Inertia Calculations? 5) A Comparative Analysis of Barchan Dunes in the Intra-Crater Dune Fields and the North Polar Sand Sea; 6) Diluvial Dunes in Athabasca Valles, Mars: Morphology, Modeling and Implications; 7) Surface Profiling of Natural Dust Devils; 8) Martian Dust Devil Tracks: Inferred Directions of Movement; 9) Numerical Simulations of Anastomosing Slope Streaks on Mars; 10) Young Fans in an Equatorial Crater in Xanthe Terra, Mars; 11) Large Well-exposed Alluvual Fans in Deep Late-Noachian Craters; 12) New Evidence for the Formation of Large Landslides on Mars; and 13) What Can We Learn from the Ages of Valles Marineris Landslides on Martian Impact History?

Source record↗

A unified neural-network framework for nucleon imaging from numerical simulations of QCD

Parton distributions encode the momentum-space structure and, in their generalizations, the spatial tomography of quarks and gluons inside hadrons, the building blocks of visible matter. We present a unified neural-network approach that learns these distributions directly from matrix elements calculated via numerical simulations of quantum chromodynamics (QCD) on the lattice by fitting two complementary inputs simultaneously: data matched to physical quantities via known momentum-space and coordinate-space formalisms. Utilizing data from both methods stabilizes the extraction and mitigates biases that can arise when either is used alone. We validate the method on controlled mock data and apply it to lattice-QCD matrix elements to extract parton distribution functions (PDFs). We show benefits of such an approach for determining the physical quantities. We further extend the framework to zero-skewness generalized parton distributions and demonstrate nucleon tomography within the same neural-network parameterization. Our results provide an adaptable and systematically improvable approach for extracting partonic distributions from Euclidean correlators. It can incorporate polarization, additional channels, and future experimental constraints from current and future facilities, such as the Electron-Ion Collider.

Hadronic Spectroscopy↗

The Impurity Magnetic Susceptibility of Semiconductors in the Case of Direct Exchange Interaction in the Ising Model

The numerical simulation was applied to study the temperature dependence of the impurity magnetic susceptibility. The direct exchange interaction of the impurity magnetic moments randomly distributed in space was considered within the Ising model. When the temperature in a system decreases, the magnetic susceptibility behavior in this system ceases to comply with the Curie law, which is associated with the formation of a spin glass phase. It is shown that the expression of the preexponential factor in the formula for the direct exchange interaction considerably influences the temperature dependence of the magnetic susceptibility only in the case of ferromagnetic exchange.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of cell-size dispersity on the mechanical properties of closed-cell aluminum foam

Highlights: • The effect of cell-size dispersity on the Young’s modulus of foam was investigated through experiments and simulations • Crushing experiments were conducted on 27 foam specimens in order measure the relative Young’s modulus • Three types of numerical models, including monodispersed, bidispersed and polydispersed models were studied • The numerical convergence on the model size for different models was also studied • The difference among numerical results obtained from the three models was insignificant - Abstract: The mechanical properties of open-celled and closed-celled metallic foam are strongly influenced by the cellular microstructure and material properties of the base material from which the foam is made. The present study investigated the microstructure and mechanical properties of ALPORAS closed-cell Al foam. In particular, the effect of cell-size dispersity on the Young's modulus of foam was investigated through crushing experiments and numerical simulations. Crushing experiments were first conducted on two mutually perpendicular directions. Numerical models of varying cell-size dispersity and complexity were subsequently developed, including the monodispersed model that is based on the Kelvin structure, the bidispersed model, and the polydispersed model that is based on the random Laguerre tessellation algorithm. The numerical models were discretized using shell elements, and the simulations were conducted using the ABAQUS finite element method software. Relative Young's moduli with various relative densities were predicted, and the numerical convergence on the model size was studied accordingly. Numerical results obtained from all three numerical models developed were found to overestimate the experimental results by a factor of approximately 3. The difference between the numerical and experimental results can be attributed to the difference in detailed microstructural characteristics. Furthermore, the difference among numerical results obtained from the three models was insignificant.

36 MATERIALS SCIENCE↗

Error and Uncertainty Quantification in the Numerical Simulation of Complex Fluid Flows

The failure of numerical simulation to predict physical reality is often a direct consequence of the compounding effects of numerical error arising from finite-dimensional approximation and physical model uncertainty resulting from inexact knowledge and/or statistical representation. In this topical lecture, we briefly review systematic theories for quantifying numerical errors and restricted forms of model uncertainty occurring in simulations of fluid flow. A goal of this lecture is to elucidate both positive and negative aspects of applying these theories to practical fluid flow problems. Finite-element and finite-volume calculations of subsonic and hypersonic fluid flow are presented to contrast the differing roles of numerical error and model uncertainty. for these problems.

Barth, Timothy J.↗

Studies of new media radiation induced laser

Various lasants were investigated especially, 2-iodohepafluoropropane (i-C3F7I) for the direct solar pumped lasers. Optical pumping of iodine laser was achieved using a small flashlamp. Using i-C3F7I as a laser gain medium, threshold inversion density, small signal gain, and laser performance at the elevated temperature were measured. The experimental results and analysis are presented. The iodine laser kinetics of the C3F7I and IBr system were numerically simulated. The concept of a direct solar-pumped laser amplifier using (i-C3F7I) as the laser material was evaluated and several kinetic coefficients for i-C3F7I laser system were reexamined. The results are discussed.

Han, K. S.↗