Search NASA⌕ Search

SEARCH · Search NASA

Results for “Error estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

A GENERALIZED STOCHASTIC COLLOCATION APPROACH TO CONSTRAINED OPTIMIZATION FOR RANDOM DATA IDENTIFICATION PROBLEMS

We present a scalable, parallel mechanism for stochastic identification/control for problems constrained by partial differential equations with random input data. Several identification objectives will be discussed that either minimize the expectation of a tracking cost functional or minimize the difference of desired statistical quantities in the appropriate $L^p$ norm, and the distributed parameters/control can both deterministic or stochastic. Given an objective we prove the existence of an optimal solution, establish the validity of the Lagrange multiplier rule and obtain a stochastic optimality system of equations. The modeling process may describe the solution in terms of high dimensional spaces, particularly in the case when the input data (coefficients, forcing terms, boundary conditions, geometry, etc) are affected by a large amount of uncertainty. For higher accuracy, the computer simulation must increase the number of random variables (dimensions), and expend more effort approximating the quantity of interest in each individual dimension. Hence, we introduce a novel stochastic parameter identification algorithm that integrates an adjoint-based deterministic algorithm with the sparse grid stochastic collocation FEM approach. This allows for decoupled, moderately high dimensional, parameterized computations of the stochastic optimality system, where at each collocation point, deterministic analysis and techniques can be utilized. The advantage of our approach is that it allows for the optimal identification of statistical moments (mean value, variance, covariance, etc.) or even the whole probability distribution of the input random fields, given the probability distribution of some responses of the system (quantities of physical interest). Our rigorously derived error estimates, for the fully discrete problems, will be described and used to compare the efficiency of the method with several other techniques. Numerical examples illustrate the theoretical results and demonstrate the distinctions between the various stochastic identification objectives.

Webster, Clayton G↗

THE LOSS OF ACCURACY OF STOCHASTIC COLLOCATION METHOD IN SOLVING NONLINEAR DIFFERENTIAL EQUATIONS WITH RANDOM INPUT DATA

n this paper we show how stochastic collocation method (SCM) could fail to con- verge for nonlinear differential equations with random coefficients. First, we consider Navier-Stokes equation with uncertain viscosity and derive error estimates for stochastic collocation discretization. Our analysis gives some indicators on how the nonlinearity negatively affects the accuracy of the method. The stochastic collocation method is then applied to noisy Lorenz system. Simulation re- sults demonstrate that the solution of a nonlinear equation could be highly irregular on the random data and in such cases, stochastic collocation method cannot capture the correct solution.

Webster, Clayton G↗

Fully automated calibration for acoustic pyrometry

A method of calibrating transceiver positions inside an acoustic pyrometry measuring vessel that contains a plurality of transceivers, includes determining (40) a speed of sound in the acoustic pyrometry measuring vessel from a temperature and gas composition of a gas inside the acoustic pyrometry measuring vessel, acquiring (41) time-of-flight (TOFs) Δti,j measurements from a plurality of pairs i,j of transceivers inside the acoustic pyrometry measuring vessel, estimating (42) a radius of the acoustic pyrometry measuring vessel from an average of the acquired TOF measurements, and using (43) an estimated radius of the acoustic pyrometry measuring vessel to estimate errors Δθj of displacement angles of the transceivers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Voltage Stability Assessment Using Synchronized Phasor Measurements Applied to the Argentine Power System

This paper presents tests of different methods for long term voltage stability analysis based on PMU measurements. In particular, Thevenin Impedance Matching and sensitivity calculation are studied. Simulation are performed in a modified Argentine power system model, to include the main components for studying long term voltage stability. Disconnection of a large Thermal Generating Station causing long-term voltage instability at Gran Buenos Aires Area is studied. It is shown that computing the apparent impedance of Thevenin equivalent at load bus from measurements taken at a single time but at various locations of the transmission corridor produce a significant reduction of the estimation error produce when only local measurements are used. Voltage Stability analysis is performed using a reduced power system model where changing parameters are fully computed through PMU data at each time. Over this reduced power system model, voltage stability index and sensibility calculations are performed.

Gill-Estebez, Pablo↗

Reconstruction of Charged Particle Tracks in Realistic Detector Geometry Using a Vectorized and Parallelized Kalman Filter Algorithm

One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is finding and fitting particle tracks during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material e ects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filterbased methods for highly parallel, many-core SIMD and SIMT architectures that are now prevalent in high-performance hardware. Previously we observed significant parallel speedups, with physics performance comparable to CMS standard tracking, on Intel Xeon, Intel Xeon Phi, and (to a limited extent) NVIDIA GPUs. While early tests were based on artificial events occurring inside an idealized barrel detector, we showed subsequently that our mkFit software builds tracks successfully from complex simulated events (including detector pileup) occurring inside a geometrically accurate representation of the CMS-2017 tracker. Here, we report on advances in both the computational and physics performance of mkFit, as well as progress toward integration with CMS production software. Recently we have improved the overall eciency of the algorithm by preserving short track candidates at a relatively early stage rather than attempting to extend them over many layers. Moreover, mkFit formerly produced an excess of duplicate tracks; these are now explicitly removed in an additional processing step. We demonstrate that with these enhancements, mkFit becomes a suitable choice for the first iteration of CMS tracking, and eventually for later iterations as well. We plan to test this capability in the CMS High Level Trigger during Run 3 of the LHC, with an ultimate goal of using it in both the CMS HLT and oine reconstruction for the HL-LHC CMS tracker.

Cerati, Giuseppe↗

Real-Time Regional PV Spinning Reserve Estimator with AGC Look-Ahead Windows: Preprint

Curtailed PV generation is a zero-marginal cost spinning reserve that can be used for a number of active power control services. However, unlike the traditional spinning reserve providers, i.e., fossil-fueled generators, who have well-defined operating characteristics, e.g., available headroom or potential high limit (PHL), PV plants have by nature variable and uncertain operating characteristics. To ensure the effective coordination between PV plants and the system operator during an active power control event, accurate forecasts of the PV PHL are essential. A novel reference-control grouping based scaling method has been proposed by NREL to estimate the PV PHL in real-time. This work further enhances the methodology by: 1) improving the model accuracy through machine learning; 2) considering look-ahead windows introduced by the computation and communication latencies; 3) applying the method to regional spinning reserve estimation. A significant performance improvement, over 1.6% of estimation error reduction, has been observed based on real-world data collected by CAISO and PV plant operators.

potential high limit↗

Numerical Modelling of Radionuclide Migration in the Context of a Near-Surface LILW Disposal Facility - 18618

The reference solution for the management of low and intermediate level short-lived waste (LILW) in France consists in their emplacement in concrete vaults built at the near-surface. The corresponding disposal facility under operation by the French waste management organization (Andra), is located in North-eastern France and planned to be closed in 2060. The safety case developed by Andra has to show the evidence that, amongst other aspects, the radionuclide transfer through the confinement barriers will occur in such a way that the human and environmental exposure will be as low as reasonably achievable (ALARA) and in accordance with the dose constraints. For this purpose, modelling is used to integrate uncertainties about the characteristics of concrete components, waste and water table and their evolution in time and space. At last, modelling is finally used to investigate the radiological impact of specific scenarios in which the failure of safety barriers occurs. In the frame of its technical review of the safety assessment, the French Institute for Radiological Protection and Nuclear Safety (IRSN) also performs such kind of numerical modelling of radionuclide fate from the waste to the hydrogeological outlets, in order to check whether the assessment performed by Andra takes into account sufficiently conservative assumptions. The present work aims to evaluate the role of components of the vaults on radionuclide transport during the post-closure period over a few thousand years. For this purpose, IRSN carries out numerical calculations with MELODIE software, which simulates water flow and transport of species, in order to simulate radionuclide migration from waste packages emplaced in a concrete vault to the surrounding groundwater. The developed transport model focuses on 3-H radionuclide and integrates Andra's main assumptions (release model from the waste packages, chemical and hydraulic properties of the vault components, shrinkage and cracks in concrete components). An adaptive mesh method, based on an a posteriori error estimator, was used to model the cracks and the consideration of a strong heterogeneity in the hydraulic and transport parameters values in the different components of the model. This method shows an improvement of results of about 40 times, whereas the mesh size was increased by only 2%. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Introduction to the FCRD Transmutation Fuels Handbook 2015

Transmutation of minor actinides such as Np, Am, and Cm in spent nuclear fuel is of international interest because of its potential for reducing the long-term health and safety hazards caused by the radioactivity of the spent fuel. For this reason, the DOE Fuel Cycle Research and Development (FCRD) Advanced Fuels Campaign (AFC) has been performing research on nuclear fuel technologies that could be used in conjunction with a future actinide transmutation mission. One important approach to transmutation involves incorporating the minor actinides into U-Pu-Zr alloys, which can be used as fuel in fast reactors. It is, therefore, important to understand the properties of U-Pu-Zr alloys. The Idaho National Laboratory has recently published a handbook intended to summarize key properties of these alloys for researchers. This handbook focuses on phases and key thermophysical properties of elements and alloys in the U-Pu-Zr system. It is envisioned as the first of a series, which will serve as a summary of current knowledge about important properties of transmutation fuels. Future volumes will include information about properties and materials not covered in the first edition, as well as updates to information in this edition of the handbook. The handbook is intended to serve two audiences. One audience is researchers, who may find it useful to know what has been measured, where it has been published, and what kinds of information are needed. A second audience is modelers, who need a concise summary of information about specific properties and the accuracy with which they are known. The two audiences have different needs, and the handbook is a compromise intended to be useful to both. Therefore, it includes summaries of research results and needs, but generally does not present the original data. It also includes numerous graphs and, where available, equations that provide convenient approximations to materials properties for modelers. It is important to understand that most of the equations provided in this handbook are derived by fitting polynomials to data and have no physical basis; while they can be used with caution for design studies, fuel modelers will probably want to use the original experimental data to develop or validate their own equations and/or models. Although the handbook includes some citations to research involving development of models, its primary focus is experimental data. Many of the measurements of the U-Pu-Zr system were made before 1980. Where possible, the handbook relies on previous reviews of experimental data rather than presenting new interpretations of the old information. It is expected that researchers will refer to the original literature for details that are not presented in the handbook. Metals and alloys in the U-Pu-Zr system are uniquely difficult to study for a number of reasons. Experimental designs may need to be modified to allow researchers to work with these hazardous materials safely. Kinetics of phase transformations are commonly sluggish, and it is highly unlikely that all of the samples in previous research had equilibrium phases and microstructures. Thermal cycling effects (changes in sample characteristics that are not fully reversed during cooling) are commonly reported and may be significant. Careful control of impurities (particularly oxygen) during sample fabrication and data collection is both crucial and difficult, and concentrations below 100 ppm in samples may significantly affect thermophysical properties. For all of these reasons, differences between measured values for similar alloys are commonly far larger than the estimated errors for individual measurements. Further research on well-characterized materials with careful control of impurities is needed for all of the alloys discussed here. The 2015 FCRD Handbook summarizes currently available information about U, Pu, Zr, and their binary and ternary alloys. It contains information about phase diagrams and related information (including phases and phase transformations); heat capacity, entropy, and enthalpy; thermal expansion; and thermal conductivity and diffusivity. In addition to presenting information about materials properties, it attempts to provide information about how well the property is known and how much variation exists between measurements. Although the handbook includes some references to publications about modeling, its primary focus is experimental data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Prediction on Underestimation of Statistical Uncertainty in Monte Carlo Eigenvalue Calculation for Two-dimensional Heterogeneous Color Set Geometry

In a Monte Carlo calculation, statistical uncertainty is inevitably included in the result. The statistical uncertainty is commonly estimated by the central limit theorem without considering correlation among generations. The statistical uncertainty is usually expected to decrease at the inverse square root of the number of neutron histories. However, in a Monte Carlo eigenvalue calculation in a large geometry whose dominance ratio is close to unity, the central limit theorem would not be valid and thus the statistical uncertainty of fission source distribution can be significantly underestimated when inter-cycle correlation is not appropriately taken into account. The true statistical uncertainty can be calculated by statistical processing of the results obtained by multiple Monte Carlo runs using different initial random seeds, but this approach has a drawback of large calculation cost. Therefore, prediction of true statistical uncertainty by alternate approach is desirable. One of the solutions for this issue is an evaluation method of statistical uncertainty based on the eigenfunction expansion and the Autoregressive model (AR model). In this method, the true statistical uncertainty is theoretically derived by applying the AR model to behavior of expansion coefficients of eigenfunction in fission source distribution during cycles. Underestimation ratio of statistical uncertainty of fission source distribution can be predicted by this method. Note that the underestimation ratio of statistical uncertainty is defined by the ratio of estimated error by a Monte Carlo calculation to the true statistical error. In the previous study, the proposed method was verified in a simple condition such as one energy group, one dimensional homogeneous slab geometry. Contributions of this summary are as follows. Firstly, expression of the noise term that is appeared in the AR model is theoretically derived. Secondly, prediction on underestimation ratio of statistical uncertainty is carried out in a more general case, i.e., flux of each fuel cell in 2 x 2 heterogeneous assembly geometry taken from the C5G7 benchmark problem. Through the present study, applicability of the theoretical prediction for underestimation of statistical uncertainty in practical problems will be verified. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Geothermal Uncertainty Representation in reV: the Renewable Energy Potential Model

We present a preliminary methodology for including geothermal resource uncertainty into the Renewable Energy Potential model, which estimates potential capacity and costs on a gridded surface at the national scale. The uncertainty outputs characterize the 10th, 50th and 90th percentile for geothermal resources using two energy capacity estimation equations. We then present a method and results that demonstrate how other geologic data layers, which may be indicative of permeability, can be used to inform the mean and standard deviation of the geothermal capacity. We demonstrate how the mean and standard deviation can be defined or partially informed by using collocated regression estimates and estimate errors, respectively . These regression results are from 36 observed geothermal power plants in the Great Basin region and are also used to benchmark the P10-P90 calculations.

exclusions↗

Measuring galaxy cluster masses with CMB lensing using a Maximum Likelihood estimator: statistical and systematic error budgets for future experiments

We develop a Maximum Likelihood estimator (MLE) to measure the masses of galaxy clusters through the impact of gravitational lensing on the temperature and polarization anisotropies of the cosmic microwave background (CMB). We show that, at low noise levels in temperature, this optimal estimator outperforms the standard quadratic estimator by a factor of two. For polarization, we show that the Stokes Q/U maps can be used instead of the traditional E- and B-mode maps without losing information. We test and quantify the bias in the recovered lensing mass for a comprehensive list of potential systematic errors. Using realistic simulations, we examine the cluster mass uncertainties from CMB-cluster lensing as a function of an experiment’s beam size and noise level. We predict the cluster mass uncertainties will be 3 - 6% for SPT-3G, AdvACT, and Simons Array experiments with 10,000 clusters and less than 1% for the CMB-S4 experiment with a sample containing 100,000 clusters. The mass constraints from CMB polarization are very sensitive to the experimental beam size and map noise level: for a factor of three reduction in either the beam size or noise level, the lensing signal-to-noise improves by roughly a factor of two.

79 ASTRONOMY AND ASTROPHYSICS↗

Real-Time Estimation Of Aiming Error Of Spinning Antenna

Spinning-spacecraft dynamics and amplitude variations in communications links studied from received-signal fluctuations. Mathematical model and associated analysis procedure provide real-time estimates of aiming error of remote rotating transmitting antenna radiating constant power in narrow, pencillike beam from spinning platform, and current amplitude of received signal. Estimates useful in analyzing and enhancing calibration of communication system, and in analyzing complicated dynamic effects in spinning platform and antenna-aiming mechanism.

Dolinsky, Shlomo↗

Estimation and Control of Modeling Error: A General Approach to Multiscale Modeling

This chapter describes a class of computational methods designed to handle multiscale modeling of large atomistic or molecular systems. The key to this approach is the estimation of relative modeling error in which errors in quantities of interest produced by averaging or homogenization are computed using a posteriori error estimates. The error is judged to be the relative error between the fine-scale base model and any number of surrogates produced by homogenization. Features of modeling the atomistic to continuum interface are also addressed. Specific applications of the methodology are described that involve analyzing polymer etch barriers that are used in nano-manufacturing of semi-conductors. The basic adaptive modeling strategy employs goal-oriented adaptation in which fine-scale information is systematically added to hybrid molecular-continuum models until the appropriate level of accuracy in certain quantities of interest is achieved.

97 MATHEMATICS AND COMPUTING↗

Practical Aspects of the Equation-Error Method for Aircraft Parameter Estimation

Various practical aspects of the equation-error approach to aircraft parameter estimation were examined. The analysis was based on simulated flight data from an F-16 nonlinear simulation, with realistic noise sequences added to the computed aircraft responses. This approach exposes issues related to the parameter estimation techniques and results, because the true parameter values are known for simulation data. The issues studied include differentiating noisy time series, maximum likelihood parameter estimation, biases in equation-error parameter estimates, accurate computation of estimated parameter error bounds, comparisons of equation-error parameter estimates with output-error parameter estimates, analyzing data from multiple maneuvers, data collinearity, and frequency-domain methods.

Morelli, Eugene a.↗

Effects of structural error on the estimates of parameters of dynamical systems

In this paper, the notion of 'near-equivalence in probability' is introduced for identifying a system in the presence of several error sources. Following some basic definitions, necessary and sufficient conditions for the identifiability of parameters are given. The effects of structural error on the parameter estimates for both the deterministic and stochastic cases are considered.

Hadaegh, F. Y.↗

Estimating Uncertainty in GPCP and TRMM Multi-Satellite Precipitation Estimates

One of the high-priority problems in satellite precipitation estimation is developing algorithms for estimating the errors in precipitation retrievals by individual sensors and subsequent multi-satellite combinations. Classically, we distinguish between "random" and "bias" errors, which do and do not, respectively average to zero over a "big enough" time/space sample. The current operational GPCP and TRMM multi-satellite algorithms are nearly unique in estimating random error for the monthly precipitation estimates from individual sensor systems (including gauge), following Huffman, and then making multi-sensor combinations. No routinely operational global precipitation produces estimates of bias error. Subsequently, a similar scheme has been followed to provide random error estimates for the Multi-satellite Precipitation Analysis (MPA) being computed in real time and after real time for TRMM. The Huffman algorithm for random error is briefly reviewed, including a discussion of the limitations imposed on the algorithm by standard monthly precipitation data sets. Starting from a very simple theoretical treatment of the histogram of precipitation samples in a month, an equation is developed that depends on the estimated average precipitation rate for the month, the number of samples in the month, and two constants. The constants are set separately for each source of precipitation estimate (such as "raingauge") by calibration at selected ground sites. We discuss recent work validating the random error estimates to highlight the successes and limitations of this first-generation approach. We then consider what information is needed from the individual sensor algorithms to facilitate additional accuracy in the estimation of random errors across the time/space span of climate regimes which a global estimation system must handle. In addition, the thorny issue of estimating bias is raised. Finally, the role of error estimates (and the qualitative errors!) in creating combinations of precipitation estimates from different individual sensors is discussed. This issue is particularly important when fine scales in space and time are being considered, say the 0.25 x 0.25-deg 3-hourly estimates in the MPA.

Huffman, G. J.↗

Estimation of cyclic error due to scattering in the internal OPD metrology of the Space Interferometry Mission

A common-path laser heterodyne interferometer capable of measuring the internal OPD with accuracy of the order of 10 picometers was demonstrated at JPL. To achieve this accuracy, the relative power received by the detector that is contributed by the scattering of light at the optical surfaces should be less than -97 dB. A method has been developed to estimate the cyclic error caused by the scattering of the optical surfaces. The result of the analysis is presented.

Zhao, Feng↗

Estimation of Cyclic Error Due to Scattering in the Internal OPD Metrology of the Space Interferometry Mission

A common-path laser heterodyne interferometer capable of measuring the internal optical path difference (OPD) with accuracy of the order of 10 pm was demonstrated at JPL. To achieve this accuracy, the relative power received by the detector that is contributed by the scattering of light at the optical surfaces should be less than -97 dB. A method has been developed to estimate the cyclic error caused by the scattering of the optical surfaces. The result of the analysis is presented.

scattering↗