Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUNCTIONAL MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Utility of BRDF Models for Estimating Optimal View Angles in Classification of Remotely Sensed Images

Statistical classification of remotely sensed images attempts to discriminate between surface cover types on the basis of the spectral response recorded by a sensor. It is well known that surfaces reflect incident radiation as a function of wavelength producing a spectral signature specific to the material under investigation. Multispectral and hyperspectral sensors sample the spectral response over tens and even hundreds of wavelength bands to capture the variation of spectral response with wavelength. Classification algorithms then exploit these differences in spectral response to distinguish between materials of interest. Sensors of this type, however, collect detailed spectral information from one direction (usually nadir); consequently, do not consider the directional nature of reflectance potentially detectable at different sensor view angles. Improvements in sensor technology have resulted in remote sensing platforms capable of detecting reflected energy across wavelengths (spectral signatures) and from multiple view angles (angular signatures) in the fore and aft directions. Sensors of this type include: the moderate resolution imaging spectroradiometer (MODIS), the multiangle imaging spectroradiometer (MISR), and the airborne solid-state array spectroradiometer (ASAS). A goal of this paper, then, is to explore the utility of Bidirectional Reflectance Distribution Function (BRDF) models in the selection of optimal view angles for the classification of remotely sensed images by employing a strategy of searching for the maximum difference between surface BRDFs. After a brief discussion of directional reflect ante in Section 2, attention is directed to the Beard-Maxwell BRDF model and its use in predicting the bidirectional reflectance of a surface. The selection of optimal viewing angles is addressed in Section 3, followed by conclusions and future work in Section 4.

Valdez, P. F.↗
DOE OSTI2011

Crystalline islands of semiconductor films

Silicon carbide (SiC) nucleation in the form of powder in a discharge plasma and the formation of thin film islands on a Si(100) substrate in the course of gas-phase epitaxy are simulated numerically. Models of plasma-like media and nonequilibrium processes accompanying phase transitions of the first kind (such as condensation and crystallization) in the initial fast (fluctuation) stage are described. The nonstationary evolution of nuclei size distribution functions is modeled by solving kinetic equations in partial derivatives and stochastic Ito-Stratonovich analog equations. This makes it possible to refine the formation mechanisms of microcrystalline state polytypes and calculate the nucleation rate and the initial roughness of a SiC coating.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Statistical analysis of magnetic divertor configuration influence on H-mode transitions

DIII-D plasmas are compared for two upper divertor configurations: with the outer strike point on the small angle slot (SAS) divertor target and with the outer strike point on the horizontal divertor target (HT). Scanning the vertical distance between the magnetic null point and the divertor target over a range 0.10–0.16 m is shown to increase the threshold power, $P_\mathrm{th}$, and edge plasma power, $P_\mathrm{Loss},$ for the low-to-high confinement (L–H) and H–L transitions respectively, by up to a factor of 1.4. The X-point height scans were performed at three L-mode core plasma line average electron densities, $\bar{n}_\mathrm{e} = $ 1.2, 2.2 and 3.6 $\times 10^{19}\,\mathrm{m}^{-3}$, to investigate the density dependence of divertor magnetic configuration influence on $P_\mathrm{th}$. The X-point height, $Z_\textrm{x-pt}$, was further extended across the range 0.16–0.22 m with the more open HT divertor configuration, for which a clear decrease in $P_\mathrm{th}$ with increasing $Z_\textrm{x-pt}$ is observed. The dependence of $P_\textrm{th}$ on divertor magnetic geometry is further investigated using a time-dependent probability density function (PDF) model and information geometry to elucidate the roles played by pedestal plasma turbulence and perpendicular velocity flows. The degree of stochasticity of the plasma turbulence is observed to be sensitive to the plasma heating rate. The calculated square of the information rate shows changes in the relative density fluctuations and perpendicular velocity PDFs begin 2–5 ms prior to the L–H transition for three plasmas; providing a crucial measurement of the dynamic timescale of external transport barrier formation. Additionally, both information length and rate provide potential predictors of the L–H transition for these plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2010

Development of a realistic photonic modeling for the evaluation of infrared reflections in the metallic environment of ITER

In nuclear fusion experiments, the plasma facing components are exposed to high heat fluxes and infrared (IR) imaging diagnostics are routinely used for surveying their surface temperature for preventing damages. However the future use of metallic components in the ITER tokamak adds complications in temperature estimation. Indeed, low and variable emissivity of the observed surface and the multiple reflections of the light coming from hot regions will have to be understood and then taken into account. In this paper, a realistic photonic modeling based on Monte Carlo ray-tracing codes is used to predict the global response of the complete IR survey system. This also includes the complex vessel geometry and the thermal and optical surface properties using the bidirectional reflectivity distribution function that models the photon-material interactions. The first results of this simulation applied to a reference torus are presented and are used as a benchmark to investigate the validity of the global model. Finally the most critical key model parameters in the reflected signals are identified and their contribution is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Integrating New Arctic Plant Functional Types in a Land Surface Model Using Above- and Belowground Field Observations: Modeling Archive

This Modeling Archive is in support of an NGEE Arctic publication "Integrating New Arctic Plant Functional Types in a Land Surface Model Using Above- and Belowground Field Observations". We used field observations of biomass and leaf traits (Salmon et al., 2019b) across a gradient of plant communities on the Seward Peninsula in northwest Alaska (Breen et al., 2020; Iversen et al., 2017) to replace the original ELM configuration with nine, arctic-specific PFTs. Original arctic PFTs in the model were (1) broadleaf deciduous boreal shrub and (2) C3 arctic grass. New PFTs were (1) lichen, (2) bryophyte, (3) evergreen dwarf shrub, (4) deciduous dwarf shrub, (5) deciduous low shrub, (6) deciduous low to tall shrub, (7) alder shrub, (8) forb, and (9) graminoid. New PFTs were parameterized and evaluated using site-level trait and biomass measurements (Salmon et al., 2019b), root C:N ratios and rooting depth patterns (Salmon et al., 2019c), and root biomass (Salmon et al., 2020). This archive contains forcing data and model output from ELM simulations conducted at the Kougarok Hillslope site (Kougarok Road Mile Marker 64). Simulations were conducted for the Kougarok Hillslope site using meteorological driving data from the Scenarios Network for Alaska and Arctic Planning (SNAP) downscaled climate projection dataset using NCAR-CCSM forcing (Bieniek et al., 2020 dataset; Walsh et al., 2018). The archive includes three versions of model simulations representing a progression from the original model configuration to an Arctic-specific configuration (see Output section below). Simulation 1 used grid cell data from a global E3SM configuration, including the fractional area of E3SM PFTs assigned to the grid cell containing the Kougarok Hillslope site in global simulations. This simulation did not distinguish between different plant communities on the Kougarok Hillslope, but instead used a single point simulation to represent the entire area. Simulation 2 used default E3SM PFT definitions combined with adjusted depth to bedrock for plant communities with shallow rocky layers to represent the role of abiotic soil factors in driving site differences (based on depth measurements of Iversen et al., 2019a), and adjusted the relative areas of the broadleaf deciduous boreal shrub and C3 arctic grass PFTs to reflect the observed spatial coverage of shrub and non-shrub PFTs across Kougarok Hillslope plant communities. Simulation 3 used the new arctic PFT definitions and parameterizations based on the vegetation types present at the site, along with the adjusted soil depths used in Simulation 2. Included are *.pdf, *.nc (NetCDF), *tar.gz, *.py, and *.bash files. We would like to thank Mary's Igloo Native Corporation for allowing us to perform this research on their land and giving us the opportunity to share this research with their community. Thanks to Shawn Serbin and Alistair Rogers for helpful discussions. Holly Vander Stel, Joanne Childs, and Stan Wullschleger helped with collection of field data. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

A New BRDF Hotspot Model and its Use in Improving Radiative Transfer Model Efficiency and Application to VLIDORT-based PCRTM Model

The term “hotspot” refers to the sharp increase of reflectance occurring when incident (solar) and reflected (viewing) directions almost coincide in the backscatter direction. The accurate simulation of hotspot directional signatures is important for many remote sensing applications. The RossThick-LiSparse-Reciprocal (RTLSR) Bidirectional Reflectance Distribution Function (BRDF) model is widely used in radiative transfer simulations, and the hotspot model mostly used is from Maignan- Bréon but it typically requires large values of numerical quadrature and Fourier expansion terms in order to represent the hotspot accurately. To improve its use in atmospheric radiative transfer (RT) model simulations, we have developed a modified version based on the Maignan-Bréon’s hotspot BRDF model that converge much faster numerically, making it more practical for use in RT models that require Fourier expansion of BRDF to simulate the top-of-atmosphere (TOA) hotspot signatures. On basis of the vector linearized discrete ordinate radiative transfer model (VLIDORT), we have built a line-by-line based simulation system that can simulate the TOA radiance for atmospheres with 26 gases, different aerosols, dust and clouds, and surface with different BRDF. Using simulated results under diverse atmospheric conditions, we have developed VLIDORT-PCRTM model.

Xiaozhen Xiong↗
DOE OSTI2018

Global land model development: time to shift from a plant functional type to a plant functional trait approach (Final Report)

This project advanced global land models by shifting from the current plant functional type approach to one that better utilizes what is known about the importance and variability of plant traits, within a framework of simultaneously improving fundamental physiological relations that are at the core of model carbon cycling algorithms. A primary goal for Earth system modeling is to make accurate predictions of the future trajectory of the climate system, based on a mechanistic understanding of processes regulating fluxes of mass and energy among system components. Land plays an important role in modifying the Earth’s mass and energy balance, as a critical link in the global cycling of carbon, among others. Land surface models have developed to include mechanistic representations of vegetation physiology, carbon and nutrient dynamics in plants and soils, how they might respond to changing climate and chemistry, and how those changes might feedback to influence changes in atmospheric greenhouse gases themselves. Existing models represent the global distribution of vegetation types using the Plant Functional Type concept. Plant Functional Types are classes of plant species with similar evolutionary and life history with presumably similar responses to environmental conditions like CO 2 , water and nutrient availability. Fixed properties for each Plant Functional Type are specified through a collection of physiological parameters, or traits. These traits, mostly physiological in nature (e.g., leaf nitrogen and longevity) are used in model algorithms to estimate ecosystem properties and/or drive calculated process rates. In most models, 5 to 15 functional types represent terrestrial vegetation; in essence, they assume there are a total of only 5 to 15 different kinds of plants on the entire globe. This assumption of constant plant traits captured within the functional type concept has serious limitations, as a single set of traits does not reflect trait variation observed within and between species and communities. While this simplification was necessary decades past, substantial improvement is now possible. Rather than assigning a small number of constant parameter values to all grid cells in a model, we developed procedures that predict a frequency distribution of values for any given grid cell. Thus, by incorporating the mean and variance model fidelity has been improved. The trait-based approach has improved land modeling by (1) incorporating patterns and heterogeneity of traits into model parameterization, thus evolving away from a framework that considers large areas of vegetation to have near identical trait values and (2) allowing for improved treatment of physiological responses to environmental drivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Covariant spectator theory of n p scattering: Deuteron form factors

The deuteron form factors are calculated using two model wave functions obtained from the 2007 CST high precision fits to $np$ scattering data. Included in the calculation are a new class of isoscalar $np$ interaction currents which are automatically generated by the nuclear force model used in these fits. If the nuclear model WJC2 is used, a precision fit ($\chi^2$/datum $\eqsim1$) to the Sick Global Analysis (GA) of all $ed$ elastic scattering data can be obtained by adjusting the unknown off-shell nucleon form factors $F_3(Q^2)$ (discussed before) and $F_4(Q^2)$ (introduced in this paper), and predicting the high $Q^2$ behavior of the neutron charge form factor $G_{En}(Q^2)$ well beyond the region where it has been measured directly. Relativistic corrections, isoscalar interaction currents, and off-shell effects are defined, discussed, and their size displayed. A rationale for extending $ed$ elastic scattering measurements to higher $Q^2$ is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

SU-F-T-124: Radiation Biological Equivalent Presentations OfLEM-1 and MKM Approaches in the Carbon-Ion Radiotherapy

Purpose: To study the correlations of the radiation biological equivalent doses (BED) along depth and lateral distance between LEM-1 and MKM approaches. Methods: In NIRS-MKM (Microdosimetric Kinetic Model) approach, the prescribed BED, referred as C-Eq, doses aims to present the relative biological effectiveness (RBE) for different energies of carbon-ions on a fixed 10% survival value of HCG cell with respect to convention X-ray. Instead of a fixed 10% survival, the BED doses of LEM-1 (Local Effect Model) approach, referred as X-Eq, aims to present the RBE over the whole survival curve of chordoma-like cell with alpha/beta ratio of 2.0. The relationship of physical doses as a function of C-Eq and X-Eq doses were investigated along depth and lateral distance for various sizes of cubic targets in water irradiated by carbon-ions. Results: At the center of each cubic target, the trends between physical and C-Eq or X-Eq doses can be described by a linear and 2nd order polynomial functions, respectively. Using fit functions can then calculate a scaling factor between C-Eq and X-Eq doses to have similar physical doses. With equalized C-Eq and X-Eq doses at the depth of target center, over- and under-estimated X-Eq to C-Eq are seen for depths before and after the target center, respectively. Near the distal edge along depth, sharp rising of RBE value is observed for X-Eq, but sharp dropping of RBE value is observed for C-Eq. For lateral locations near and just outside 50% dose level, sharp raising of RBE value is also seen for X-Eq, while only minor increasing with fast dropping for C-Eq. Conclusion: An analytical function to model the differences between the CEq and X-Eq doses along depth and lateral distance need to further investigated to explain varied clinic outcome of specific cancers using two different approaches to calculated BED doses.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2025

Review of Grey Box/Black Box Data Contamination Metrics on Open and Commercial Models

Dataset contamination is a problem where benchmarks and tasks used to evaluate the capabilities of Large Language Models (LLMs) have been incorporated into the training dataset of the models. This gives a false sense of performance that can overestimate how these models will function on truly unseen data. This problem becomes worse with commercial LLMs with larger and non-accessible training data, so techniques have been developed to try to measure the degree to which a model is contaminated with a benchmark’s data. To understand the effectiveness of these techniques, particularly when evaluating contamination on coding tasks, we review trends and categorize techniques by the degree of access to the model that is required. The research literature on this topic has reported mixed effectiveness of these techniques, so we select a set of black box (text access only) and grey box (access to model loss/probabilities required) techniques and apply them to both commercial and non-commercial models. We implement these metrics as part of a framework to test the contamination of Python code in LLMs to see to what extent we can replicate the effectiveness (or ineffectiveness) of these contamination detection techniques. Though we find mixed results in the capabilities of these metrics to identify contamination, we do observe evidence that they can identify contamination (broadly) in fine-tuned models when both a baseline and fine-tuned model is present. Additionally, similarity metrics were able to identify between contaminated and uncontaminated data even in situations where the data is distributionally similar (e.g., drawn from the same set of code projects).

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1987

Bragg-cell receiver study

Bragg-cell receivers are employed in specialized Electronic Warfare (EW) applications for the measurement of frequency. Bragg-cell receiver characteristics are fully characterized for simple RF emitter signals. This receiver is early in its development cycle when compared to the IFM receiver. Functional mathematical models are derived and presented in this report for the Bragg-cell receiver. Theoretical analysis is presented and digital computer signal processing results are presented for the Bragg-cell receiver. Probability density function analysis are performed for output frequency. Probability density function distributions are observed to depart from assumed distributions for wideband and complex RF signals. This analysis is significant for high resolution and fine grain EW Bragg-cell receiver systems.

Wilson, Lonnie A.↗
DOE OSTI2012

MPAS-Ocean Development Update

The Model for Prediction Across Scales (MPAS) is a modeling framework developed jointly between NCAR and LANL, built to allow core developers to: rapidly develop new dynamical cores, and leverage improvements made to shared codes. MPAS-Ocean (MPAS-O) is a functioning ocean model capable of high resolution, or highly vairable resolution simulations. The first MPAS-O publication is expected by the end of the year.

58 GEOSCIENCES↗
DOE OSTI2022

Increasing Functional Diversity in a Global Land Surface Model Illustrates Uncertainties Related to Parameter Simplification

Abstract Simulations of the land surface carbon cycle typically compress functional diversity into a small set of plant functional types (PFT), with parameters defined by the average value of measurements of functional traits. In most earth system models, all wild plant life is represented by between five and 14 PFTs and a typical grid cell (≈100 × 100 km) may contain a single PFT. Model logic applied to this coarse representation of ecological functional diversity provides a reasonable proxy for the carbon cycle, but does not capture the non‐linear influence of functional traits on productivity. Here we show through simulations using the Energy Exascale Land Surface Model in 15 diverse terrestrial landscapes, that better accounting for functional diversity markedly alters predicted total carbon uptake. The shift in carbon uptake is as great as 30% and 10% in boreal and tropical regions, respectively, when compared to a single PFT parameterized with the trait means. The traits that best predict gross primary production vary based on vegetation phenology, which broadly determines where traits fall within the global distribution. Carbon uptake is more closely associated with specific leaf area for evergreen PFTs and the leaf carbon to nitrogen ratio in deciduous PFTs.

58 GEOSCIENCES↗
DOE OSTI2017

Estimation of M 1 scissors mode strength for deformed nuclei in the medium- to heavy-mass region by statistical Hauser-Feshbach model calculations

Radiative neutron capture is an important nuclear reaction whose accurate description is needed for many applications ranging from nuclear technology to nuclear astrophysics. The description of such a process relies on the Hauser-Feshbach theory which requires the nuclear optical potential, level density, and γ-strength function as model inputs. It has recently been suggested that the M 1 scissors mode may explain discrepancies between theoretical calculations and evaluated data. We explore statistical model calculations with the strength of the M 1 scissors mode estimated to be dependent on the nuclear deformation of the compound system. We show that the form of the M 1 scissors mode improves the theoretical description of evaluated data and the match to experiment in both the fission product and actinide regions. Since the scissors mode occurs in the range of a few keV to a few MeV, it may also impact the neutron capture cross sections of neutron-rich nuclei that participate in the rapid neutron capture process of nucleosynthesis. As a result, we comment on the possible impact to nucleosynthesis by evaluating neutron capture rates for neutron-rich nuclei with the M 1 scissors mode active.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1986

The effect of heavy ions on the formation and structure of cometary bow shocks

A hybrid simulation model is used to investigate the effects of heavy cometary ions on the formation and structure of a cometary bow shock. The calculations are carried out over various Mach numbers and heavy ion velocity distribution functions. The model is based on previous formulations for phenomena in the solar wind and at the earth's bow shock. The generation of the shock is described in terms of particles injected from one side of the simulation field and reflected from the other end of the field, i.e., a solid wall boundary model. This technique permits the steep buildup of the ion density near the cometary nucleus, followed by coupling of the incident and reflected ion streams to produce a shock. It is shown that at low Mach numbers (up to Mach 2) the shock is transitory and periodically formed by protons, then destroyed by heavy ions (O+). Slightly higher Mach numbers lead to a true stationary shock. An examination of coupling effects between the solar wind and the heavy ions at low Mach numbers by using the Rankine-Hugoniot relations reveals that the ions and the solar wind protons cannot be treated as a single fluid calculating the shock characteristics.

Omidi, N.↗
NASA NTRS1991

An overview of the NASA electronic components information management system

The NASA Parts Project Office (NPPO) comprehensive data system to support all NASA Electric, Electronic, and Electromechanical (EEE) parts management and technical data requirements is described. A phase delivery approach is adopted, comprising four principal phases. Phases 1 and 2 support Space Station Freedom (SSF) and use a centralized architecture with all data and processing kept on a mainframe computer. Phases 3 and 4 support all NASA centers and projects and implement a distributed system architecture, in which data and processing are shared among networked database servers. The Phase 1 system, which became operational in February of 1990, implements a core set of functions. Phase 2, scheduled for release in 1991, adds functions to the Phase 1 system. Phase 3, to be prototyped beginning in 1991 and delivered in 1992, introduces a distributed system, separate from the Phase 1 and 2 system, with a refined semantic data model. Phase 4 extends the data model and functionality of the Phase 3 system to provide support for the NASA design community, including integration with Computer Aided Design (CAD) environments. Phase 4 is scheduled for prototyping in 1992 to 93 and delivery in 1994.

Kramer, G.↗
DOE OSTI2012

Modeling Spatial Dependencies and Semantic Concepts in Data Mining

Data mining is the process of discovering new patterns and relationships in large datasets. However, several studies have shown that general data mining techniques often fail to extract meaningful patterns and relationships from the spatial data owing to the violation of fundamental geospatial principles. In this tutorial, we introduce basic principles behind explicit modeling of spatial and semantic concepts in data mining. In particular, we focus on modeling these concepts in the widely used classification, clustering, and prediction algorithms. Classification is the process of learning a structure or model (from user given inputs) and applying the known model to the new data. Clustering is the process of discovering groups and structures in the data that are ``similar,'' without applying any known structures in the data. Prediction is the process of finding a function that models (explains) the data with least error. One common assumption among all these methods is that the data is independent and identically distributed. Such assumptions do not hold well in spatial data, where spatial dependency and spatial heterogeneity are a norm. In addition, spatial semantics are often ignored by the data mining algorithms. In this tutorial we cover recent advances in explicitly modeling of spatial dependencies and semantic concepts in data mining.

99 GENERAL AND MISCELLANEOUS↗