Search NASA⌕ Search

SEARCH · Search NASA

Results for “Key enabling technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Solar Thermal Upper Stage Liquid Hydrogen Pressure Control Testing

High-energy cryogenic propellant is an essential element in future space exploration programs. Therefore, NASA and its industrial partners are committed to an advanced development/technology program that will broaden the experience base for the entire cryogenic fluid management community. Furthermore, the high cost of microgravity experiments has motivated NASA to establish government/aerospace industry teams to aggressively explore combinations of ground testing and analytical modeling to the greatest extent possible, thereby benefitting both industry and government entities. One such team consisting of ManTech SRS, Inc., Edwards Air Force Base, and Marshall Space Flight Center (MSFC) was formed to pursue a technology project designed to demonstrate technology readiness for an SRS liquid hydrogen (LH2) in-space propellant management concept. The subject testing was cooperatively performed June 21-30, 2000, through a partially reimbursable Space Act Agreement between SRS, MSFC, and the Air Force Research Laboratory. The joint statement of work used to guide the technical activity is presented in appendix A. The key elements of the SRS concept consisted of an LH2 storage and supply system that used all of the vented H2 for solar engine thrusting, accommodated pressure control without a thermodynamic vent system (TVS), and minimized or eliminated the need for a capillary liquid acquisition device (LAD). The strategy was to balance the LH2 storage tank pressure control requirements with the engine thrusting requirements to selectively provide either liquid or vapor H2 at a controlled rate to a solar thermal engine in the low-gravity environment of space operations. The overall test objective was to verify that the proposed concept could enable simultaneous control of LH2 tank pressure and feed system flow to the thruster without necessitating a TVS and a capillary LAD. The primary program objectives were designed to demonstrate technology readiness of the SRS concept at a system level as a first step toward actual flight vehicle demonstrations. More specific objectives included testing the pressure and feed control system concept hardware for functionality, operability, and performance. Valuable LH2 thermodynamic and fluid dynamics data were obtained for application to both the SRS concept and to future missions requiring space-based cryogen propellant management.

Moore, J. D.↗

Grid-Connected Modular Soft-Switching Solid State Transformers (M-S4T)

The objective of this project is to develop and verify the concept of a flexible and modular soft-switching solid-state transformer (M-S4T) for direct grid-connected applications. The ability to directly connect power electronics converters to the medium voltage grid (4 kV – 13 kV), and to potentially replace the passive and bulky, but ubiquitous 60 hertz service transformer in the 25 kVA to 100 kVA range, with a more flexible and controllable device, has been regarded as the ‘holy grail’ in grid control. However, this has proven to be extremely difficult. This project has developed the solutions to several key challenges of the direct grid-connected power electronics and realized a 7.2 kV M-S4T prototype. First, a protection method to protect the M-S4T from the high voltages (110 kV for the 13 kV system) that occur on the grid due to transients and lightning strikes have been developed and experimentally verified. Second, the realization and the operation of the M-S4T based on high-voltage SiC devices (>3.3 kV) and a medium-frequency medium-voltage low-leakage transformer in a single-stage solid-state transformer with zero-voltage switching, low dv/dt, and low electromagnetic interference has been successfully demonstrated up to 7.5 kV peak. Third, an oil-cooling system and stable communication and distributed control system for converter module voltage sharing have been developed and experimentally verified. The developed M-S4T has realized a modular universal high-performance power conversion system. This conversion system is scalable to different voltage and power levels and adaptable to four-quadrant bidirectional operation. Moreover, the use of passive cooling techniques meets the equipment life requirements, and the lightning protection scheme fulfills the basic insulation level specifications for direct grid connection. Such power conversion system opens up near-term opportunities, including energy storage, solar PV, or electric vehicle charging with significant cost and footprint savings. In the longer term, the possibility of replacing the utility distribution transformer with an M-S4T will be transformative for future distribution grids with a compact footprint and full controllability to enable high renewable energy and storage penetration. In addition to the main project, this report expands on the Plus-Up projected including as part of the main award. This project developed and demonstrated the technology for autonomous collaborative inverters that can be connected in an ad hoc manner to the grid. The aim of the project was to: (1) evaluate the existing techniques for grid-connected inverters and find their limitations; (2) develop detailed requirements for grid-connected inverters in the modern grid with millions of active nodes; (3) design a unified control strategy that brings more autonomy and intelligence to grid-connected inverters, and addresses parts of the issues with the existing techniques. The proposed technique, called UniCon, enables inverters to 1) connect/disconnect to/from the grid in an ad hoc manner; (2) work based on local sensing. Slow communication could be used for a more optimized behavior; (3) work automatically in both grid-forming/grid-following mode; (4) handle large disturbances, e.g., big load step and fault, in an oscillation-free manner; (5) work collaboratively with other inverters in steady-state and during transients. UniCon can be implemented in the middle-level control; hence it is agnostic to the vendor and to the implementation of the inner voltage/current and protection loops. Furthermore, a new synchronization scheme, based on deep learning, was developed that can extract the grid voltage phase and amplitude in a stable manner. The method is cheap to implement can improve the dynamic performance of the grid-connected inverters during fast transients, e.g., fault. The proposed control scheme was validated by (1) MATLAB/Simulink; (2) hardware-in-the-loop results, and; (3) experimental results using three inverters that form a microgrid in a down-scaled feeder. Lastly, both the M-S4T and UniCon have achieved promising tangible paths to markets. In the case of the M-S4T, the underlying technology — the Soft Switching Solid State Transformer (S4T) developed at the Georgia Tech Center for Distributed Energy (GT-CDE) has been licensed by GridBlock from the Georgia Tech Research Corporation, and GridBlock has been working with manufacturing partner Jabil (one of the largest US-based contract manufacturers) and system integrator Power Secure (largest deployer of microgrids in the US with 4.7 GW under management), to meet the strong initial demand. Similarly, GridBlock has an exclusive license to the UniCon technology, developed under this award by GT-CDE. The UniCon provides an intermediate control layer that enables the implementation of the higher-level ‘transactive’ control commands for the system. The architecture of the system - slow communications with the cloud for system optimization and setpoints, and the use of locally measured quantities for real-time control, provide a very robust and secure way of implementing a real-time must-run grid that is also secure and stable. This is a brand-new functionality that is critical for the future grid and key to GridBlock’s business model.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Knowledge Management in Nuclear Liabilities Regulation in the UK - 18155

Within the UK's nuclear safety regulator (Office for Nuclear Regulation; ONR) nuclear liabilities regulation addresses the safe management of radioactive waste, decommissioning and land quality through a facility's lifetime. Higher activity radioactive waste (HAW) could be stored on site for up to 150 years prior to disposal, Magnox decommissioning sites are planned to be in Care and Maintenance for up to 70 years and Sellafield decommissioning is not planned to be complete until after 2100. The long timescales over which decommissioning occurs and radioactive waste is managed is a challenge to maintaining a suitable level of knowledge to effectively and efficiently regulate nuclear liabilities activities. There is a danger that implicit knowledge accumulated over decades could be lost as people retire. Effective knowledge capture and transfer are key elements in maintaining a workforce with the capacity and capability to deliver high levels of nuclear safety, given the demographics of the UK nuclear industry. Maintenance of recorded information over long timescales with changing technologies is necessary to allow safe storage and disposal of waste and intelligent response to incidents. As the safety regulator, ONR's ability to influence improvement in nuclear safety relies on our inspectors having access to high quality knowledge. The ONR Strategy 2016-2020 [1,2] commits to continue to recruit, retain and develop staff so that we have a core workforce with the capacity and capability to deliver high quality, enabling nuclear regulation. Over the next 30 years, the UK plans to develop a geological disposal facility and UK EDF power stations will transition into decommissioning. The ONR Knowledge Management Strategy sets out the activities planned to maintain specialist knowledge to support staff development and build organisational resilience. Guidance on waste management is given in 'The management of higher activity radioactive waste on nuclear licensed sites' (referred to as the Joint Guidance [3]) published by ONR and the UK environmental regulators. It includes our expectations for managing information and records relating to radioactive waste, and introduces the concept of Radioactive Waste Management Cases (RWMCs). Our expectation is that knowledge and records must both be managed and transferred in such a way that future licensees are properly equipped to ensure that waste continues to be managed in a manner that prevents or minimises hazards to human health and the environment. RWMCs are an effective vehicle for demonstrating how the key elements of long-term safety and environmental performance will be delivered over the life cycle of the waste. They give a history of how the waste has been managed, capturing information and change over time. This paper will look at the challenges to managing knowledge in the UK nuclear industry, focusing on the safe management of radioactive waste, decommissioning and land quality. It will look at the problems faced by both licensees and ONR, drawing out common challenges. The paper will outline the approach taken within ONR to capture and communicate waste management and decommissioning knowledge and experience. Finally, it will look at how ONR regulates and influences how knowledge and records are dealt with in the industry to ensure safe nuclear liabilities management in the long term. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development and Validation of the Near-Miss Safety Score (NMSS) Framework for Heavy-Duty Vehicle Safety Assessment

Heavy-duty commercial vehicles present unique safety challenges due to their size, articulation dynamics, and operational complexity. As Advanced Driver Assistance Systems (ADAS) and Automated Driving Systems (ADS) become more common in Class 8 tractor-trailers, traditional crash-based metrics are no longer sufficient to evaluate safety performance. This study introduces the Near-Miss Safety Score (NMSS)—a quantitative, physics-informed framework developed as a leading indicator of safety for advanced commercial vehicle technologies. NMSS quantifies how close a vehicle or operator comes to a collision or safety-critical event by integrating vehicle kinematics (relative distance, velocity, and acceleration) with driver or system response latency and time-to-collision. A modifier function adjusts the base score for vehicle-specific and environmental factors such as trailer articulation, load distribution, braking condition, and roadway environment. The framework enables systematic evaluation of ADAS/ADS performance under a range of operational and degraded conditions. By capturing near-miss dynamics rather than relying on crash data, NMSS provides a proactive approach to risk assessment, accelerates technology validation, and enhances interpretability for regulators and fleet operators. The proposed NMSS was validated using data collected from a motorcoach platform, demonstrating the framework’s applicability to heavy-duty safety evaluation and performance benchmarking. Results and key insights are presented in this paper.

Siekmann, Adam [ORNL] (ORCID:0000000284653935)↗

Faster than Real-Time Dynamic Simulation for Large-Size Power System with Detailed Dynamic Models using High-Performance Computing Platform

This paper presents a faster-than-real-time dynamic simulation software package that is designed for large-size power system dynamic simulation. It was developed on the GridPACKTM high-performance computing (HPC) framework. The key features of the developed software package include (1) faster-than-real-time dynamic simulation for a WECC system (17,000 buses) with different types of detailed generator, controller, and relay dynamic models, (2) a decoupled parallel dynamic simulation algorithm with optimized computation architecture to better leverage HPC resources and technologies, (3) options for HPC-based linear and iterative solvers, (4) hidden HPC details, such as data communication and distribution, to enable development centered on mathematical models and algorithms rather than on computational details for power system researchers, and (5) easy integration of new dynamic models and related algorithms into the software package.

Huang, Renke↗

Reverse Osmosis Optimization

This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.

McMordie Stoughton, Kate L.↗

Ion Channel Laser Based on Direct Laser Acceleration of a Shaped Beam Driver (Final Technical Report)

The main focus of our research was to understand the synergies between an electron bunch and a laser pulse when the two co-propagate through the plasma. We have clearly demonstrated using theoretical and computational modeling that the propagation distance of both the bunch and the laser pulse could be extended. The ability of the combined bunch/pulse system to extend the propagation distance and the size of the plasma bubble enables highly-efficient sources of relativistic electrons. As pointed out by the Plasma Decadal Study, such electron sources can be used for generating extremely bright x-rays for a variety of applications can serve as probes and diagnostics for other plasma experiments: high energy density (HED) sciences, inertial confinement fusion (ICF), and potentially Fusion Materials and Technology (FM&T). Development of advanced diagnostics of plasma-based accelerators is yet another key area identified by recent reports. Even broader security and medical applications of compact accelerator-based radiation sources, such as very high energy electron (VHEE) sources for FLASH radiobiology, have been identified by a recent multi-agency panel. A number of key technical issues were considered and successfully resolved during the course of the grant. Those include: beam loading effect of both the driver and witness bunches on the wake, laser channeling by the bunch, and the direct laser acceleration (DLA) of the driver bunch by the laser pulse. To demonstrate clear synergy, we were able to ascertain that the total energy gain of a witness bunch in the wake of the combined bunch/laser complex is large than the sum of the energy gains in the wake of the laser pulse alone, and the driver bunch alone. We have also demonstrated that not only the energy gain is improved, but the energy spread is not sacrificed. To carry out these simulations, we have to develop a range of in-house computational tools, including a fully-3D code WAND-PIC.

43 PARTICLE ACCELERATORS↗

National General Aviation Roadmap for a Small Aircraft Transportation System (SATS)

The National Aeronautics and Space Administration (NASA), Federal Aviation Administration, as well as state, industry, and academia partners have joined forces to pursue the NASA National General Aviation Roadmap leading to a Small Aircraft Transportation System (SATS). This long-term strategic undertaking has a goal to bring next-generation technologies and improve air access to small communities. The envisioned outcome is to improve travel between remote communities and transportation centers in urban areas by utilizing a new generation of single-pilot light planes for personal and business transportation between the nation's 5,400 public use general aviation airports. Current NASA investments in aircraft technologies are enabling industry to bring affordable, safe, and easy-to-use features to the marketplace, including "Highway in the Sky" glass cockpit operating capabilities, affordable crash worthy composite airframes, more efficient IFR flight training, and revolutionary engines. To facilitate this initiative, a comprehensive upgrade of public infrastructure must be planned, coordinated, and implemented within the framework of the national air transportation system. State partnerships are proposed to coordinate research support in key public infrastructure areas. Ultimately, SATS may permit more than tripling aviation system throughput capacity by tapping the under-utilized general aviation facilities to achieve the national goal of doorstep-to-destination travel at four times the speed of highways for the nation's suburban, rural, and remote communities.

Holmes, Bruce J.↗

Expected EDL navigation performance with spacecraft to spacecraft data

Pinpoint landing (defined for the purpose of this discussion as landing within 1km of a preselected target) is a key Advanced Entry, Descent and Landing (EDL) technology for future Mars landers. Key scientific goals for Mars exploration, such as the search for water and characterization of aqueous process on Mars, the study of mineralogy and weathering of the Martian surface and the search for preserved biosignatures in Martian rocks, requires placing landers at pre-defined locations of greatest scientific interest. The capability to land within 1 km of a pre-defined landing site will improve safety and enable landing within roving range of sites of scientific interest while avoiding hazardous areas. A critical component of the closed-loop guidance, navigation and control (GN&C) system required for pinpoint landing is position and velocity estimation in real time. Spacecraft-to-spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will reduce the landed position error and improve the performance of entry guidance. Results from the first of two years planned for this effort are documented here, including selection and documentation of prototype algorithms that will go forward into flight code along with analysis results used to define the algorithm set.

descent and landing↗

Towards a Preservation Content Standard for Earth Observation Data

Information from Earth observing missions (remote sensing with airborne and spaceborne instruments, and in situ measurements such as those from field campaigns) is proliferating in the world. Many agencies across the globe are generating important datasets by collecting measurements from instruments on board aircraft and spacecraft, globally and constantly. The data resulting from such measurements are a valuable resource that needs to be preserved for the benefit of future generations. These observations are the primary record of the Earths environment and therefore are the key to understanding how conditions in the future will compare to conditions today. Earth science observational data, derived products and models are used to answer key questions of global significance. In the near-term, as long as the missions data are being used actively for scientific research, it continues to be important to provide easy access to the data and services commensurate with current information technology. For the longer term, when the focus of the research community shifts toward new missions and observations, it is essential to preserve the previous mission data and associated information. This will enable a new user in the future to understand how the data were used for deriving information, knowledge and policy recommendations and to repeat the experiment to ascertain the validity and possible limitations of conclusions reached in the past and to provide confidence in long term trends that depended on data from multiple missions. Organizations that collect, process, and utilize Earth observation data today have a responsibility to ensure that the data and associated content continue to be preserved by them or are gathered and handed off to other organizations for preservation for the benefit of future generations. In order to ensure preservation of complete content necessary for understanding and reusing the data and derived digital products from todays missions, it is necessary to develop a specification of such preservation content. While there are existing standards that address archival and preservation in general, there are no existing international standards or specifications today to address what content should be preserved. The purpose of this paper is to outline briefly the existing standards that apply to preservation, describe a recent effort in getting an international standard in place for specifying preservation content for Earth observation data and derived digital data products and the remaining work needed to arrive at a standard.

ISO Standards↗

The Advanced Energetic Pair Telescope for Gamma-Ray Polarimetry

The Advanced Energetic Pair Telescope (AdEPT), a future NASA/GSFC MIDEX mission, is being developed to perform high-sensitivity medium-energy (5-200 MeV) astronomy and revolutionary gamma-ray polarization measurements. The enabling technology for AdEPT is the Three- Dimensional Track Imager (3-DTI), a large volume gaseous time projection chamber with 2- dimentional micro-well detector (MWD) readout. The low density and high spatial resolution of the 3-DTI allows AdEPT to achieve high angular resolution (~0.5 at 67.5 MeV) and, for the first time, exceptional gamma-ray polarization sensitivity. These capabilities enable a wide range of scientific discovery potential for AdEPT. The key science goals of the AdEPT mission include: 1) Explore fundamental processes of particle acceleration in active astrophysical objects, 2) Reveal the magnetic field configuration of the most energetic accelerators in the Universe, 3) Explore the origins and acceleration of cosmic rays and the Galactic MeV diffuse emission, 4) Search for dark matter in the Galactic center, and 5) Test relativity with polarization measurements. We report on the latest developments of the MWDs for the 3-DTI.

Hunter, Stanley D.↗

Towards a Reference Architecture for Model-Based Engineering Environments

A key aspect of adopting model-based systems engineering as a practice in an organization is the design and development, and adoption of corresponding processes and tools that support the model-based paradigm. In an effort to enable the unified implementation of such processes and tools, this paper introduces a reference architecture model that serves as a specification for a model-based engineering environment. Current systems engineering practices, products, processes and technologies are used as input for continuously refining the architecture model. In the paper, we introduce and report on the current status of this reference architecture model, and present the methodology applied in developing the reference architecture. We conclude that while there are a very large number of domain- or application-specific processes requiring specialized behavior, these can be reduced through abstraction to a small set of core functions that need to be supported by a realization of a model-based engineering environment. Only very few organization-domain- or application-specific aspects require specialized consideration.

Herzig, Sebastian J. I.↗

Enabling Mars Radio Occultation by Smallsats

We introduce a Mars Radio Occultation (RO) mission concept leveraging on small satellite (smallsat) technologies that will enable measurements that address both Mars science and exploration priorities. The RO technique measures the Doppler shift of radio signals of a spacecraft occulting behind a planet’s limb that contains information about the planet’s atmospheric density, temperature, and pressure. We design a smallsat constellation and simulate “crosslink” RO observations between the smallsats to determine the expected accuracy and spatiotemporal coverage of Mars RO atmospheric profiles. Such measurements are key to spacecraft Entry, Descent, and Landing (EDL) and Ascent from the Surface (AST) of Mars. Today, there are limited number of Mars atmospheric profiles with high vertical resolution, especially measurements near the surface that are difficult to obtain from satellite-based passive instruments due to atmospheric absorption. We find that crosslink ROs between a constellation of six smallsats provide global and diurnal cycle coverage with dozens of occultations per day, providing temperature information from near-surface up to ~45 km with altitude-dependent accuracy that ranges between <0.5 K at lower altitude to <5 K in the middle-to-upper atmosphere. Ionospheric ROs reveal an expected electron density of ~5 – 10% at the peak ionospheric height between 100 and 140 km. We conclude that observations obtained from a smallsat constellation can augment existing observing platforms by reducing observational gaps and yield high resolution measurements required for safe spacecraft operations during EDL and AST.

Martinez, German↗

Reverse Osmosis Optimization

This technology evaluation was prepared by Pacific Northwest National Laboratory on behalf of the U.S. Department of Energy’s Federal Energy Management Program (FEMP). The technology evaluation assesses techniques for optimizing reverse osmosis (RO) systems to increase RO system performance and water efficiency. This evaluation provides a general description of RO systems, the influence of RO systems on water use, and key areas where RO systems can be optimized to reduce water and energy consumption. The evaluation is intended to help facility managers at Federal sites understand the basic concepts of the RO process and system optimization options, enabling them to make informed decisions during the system design process for either new projects or recommissioning of existing equipment. This evaluation is focused on commercial-sized RO systems generally treating more than 80 gallons per hour.

osmosis, optimization↗

Hydrogen Energy Storage and Power-to-Gas: Establishing Criteria for Successful Business Cases

As the electric sector evolves and increasing amounts of variable generation are installed on the system, there are greater needs for system flexibility, sufficient capacity and greater concern for overgeneration. As a result there is growing interest in exploring the role of energy storage and demand response technologies to support grid needs. Hydrogen is a versatile feedstock that can be used in a variety of applications including chemical and industrial processes, as well as a transportation fuel and heating fuel. Traditionally, hydrogen technologies focus on providing services to a single sector; however, participating in multiple sectors has the potential to provide benefits to each sector and increase the revenue for hydrogen technologies. The goal of this work is to explore promising system configurations for hydrogen systems and the conditions that will make for successful business cases in a renewable, low-carbon future. Current electricity market data, electric and gas infrastructure data and credit and incentive information are used to perform a techno-economic analysis to identify promising criteria and locations for successful hydrogen energy storage and power-to-gas projects. Infrastructure data will be assessed using geographic information system applications. An operation optimization model is used to co-optimizes participation in energy and ancillary service markets as well as the sale of hydrogen. From previous work we recognize the great opportunity that energy storage and power-to-gas but there is a lack of information about the economic favorability of such systems. This work explores criteria for selecting locations and compares the system cost and potential revenue to establish competitiveness for a variety of equipment configurations. Hydrogen technologies offer unique system flexibility that can enable interactions between multiple energy sectors including electric, transport, heating fuel and industrial. Previous research established that hydrogen technologies, and in particular electrolyzers, can respond fast enough and for sufficient duration to participate in electricity markets. This work recognizes that participation in electricity markets and integration with the gas system can enhance the revenue streams available for hydrogen storage systems and quantifies the economic competitiveness and of these systems. A few of the key results include 1) the most valuable revenue stream for hydrogen systems is to sell the produced hydrogen, 2) participation in both energy and ancillary service markets yields the greatest revenue and 3) electrolyzers acting as demand response devices are particularly favorable.

30 DIRECT ENERGY CONVERSION↗

Efficient Routing of Quantum LDPC Codes on Programmable 2D Toric Architectures

Quantum low-density parity-check codes are promising candidates towards scalable fault-tolerant quantum computation. Among these, bivariate bicycle (BB) codes offer superior encoding rates and large code distance compared to surface codes. However, their requirement on long-range stabilizer measurements poses significant challenges for implementation on realistic hardware with limited connectivity, such as superconducting circuit platforms. In this work, we introduce a novel hardware-software co-design that leverages a programmable communication network architecture to address these limitations. Our approach utilizes a 2D toric network of oscillators as a flexible communication fabric linking qubits at each site. Such architecture significantly reduces the number of long-range couplers required from O ( n ) to O (√ n ). Dual-rail qubits, along with native gates including Swap-Wait-Swap gates and beamsplitter SWAPs, ensure that long-range two-qubit gates can be executed with high fidelity and low latency. To further enhance performance, our qubit layout and routing algorithm utilize symmetries of the codes and enable maximum parallelism for long-range two-qubit gates, maintaining a low syndrome extraction cycle duration and scalability over the code length. We perform circuit-level simulation with realistic noise modeling based on experimental hardware parameters, observing an logical error rate per logical qubit per cycle of 3.06% for [[18,4,4]] BB code, 2.6× less than the existing experimental result. These findings provide a practical roadmap and identify key technological advancements needed to achieve low-overhead fault-tolerant quantum computing at scale.

Liu, Kun [Yale Univ., New Haven, CT (United States↗

Canola-Based Automotive Oil Research and Development

This research project establishes data on the ability of the bioindustry to provide sufficient production of Canola/rapeseed, functioning as a biolubricant, to replace petroleum-based automotive lubricants at competitive prices. In 2005 total sales for lubricants amounted to 2.5 billion gallons. Research was also conducted to determine the attitudes toward adoption of bioproducts, specifically among industries that are large-scale users of automotive lubricants, including government and private industry users. The green technology industry, or bioindustry, uses a variety of plant- and crop-based resources, known as biomass, to produce energy, fuel and many different bioproducts. Rapeseed is categorized as a lignocellulosic biomass. High erucic acid rapeseed is not intended for human consumption thereby negating the food vs. fuel issue that arose with the increased production of corn as a feedstock for use in ethanol. Key findings show that the oil from Canola/rapeseed provides about twice the yield than soybean oil. These seeds also have significantly higher natural lubricity than petroleum, enabling Canola/rapeseed to function in many different capacities where oxidation issues are critical. It also has the most positive energy balance of all common vegetable oils, making it an excellent potential replacement for petroleum-based fuels as well. As a rotating crop, it enhances farm lands, thereby increasing subsequent yields of barley and wheat, thus increasing profit margins. Petroleum-based bioproducts negatively impact the environment by releasing greenhouse gases, sulfur, heavy metals and other pollutants into the air, ground and water. Replacing these products with bio-alternatives is a significant step toward preserving the country’s natural resources and the environment. Further to this, promoting the growth of the green biotechnology industry will strengthen the nation’s economy, creating jobs in the agriculture, science and engineering sectors, while reducing dependency on unstable foreign oil products. The result of this research benefits the public by proving that Canola/rapeseed is another viable source from which the government, private industry and consumers can choose to reduce their reliance on petroleum products. Research found that our country is not utilizing our capabilities including, land, labor and equipment to its fullest potential. A commercial-scale fully-integrated biorefinery, such as the one outlined in this research project, produces little to no waste and the by-products are also consumable. This model allows for economies of scale that make it possible to produce biolubricants in sufficient quantities and at prices that are competitive with petroleum products. Integrated biorefinery operations and large-scale production levels are necessary to sustain profitability of the entire biorefinery model. It is a practical solution that can be implemented in less than 18 months, and replicated throughout the country. There is ample, viable land available as acreage from the Conservation Reserve Program will soon be increasing as land is being released from this program, meaning that it no longer will be kept fallow while the owners accept subsidies. The 2008 Farm Bill reduced the total number of acres allowed in the CRP program, leaving several million acres of land available over the next few years. All of the necessary technology exists to operate the farming and production of this type of biorefinery project. This is a here and now project that can serve to create jobs in several locations throughout the country. There are experts ready, willing and able to participate, all of whom have vast knowledge in the areas of chemical and oil product manufacturing, farm production, and marketing. Two of the biggest barriers to advancing a commercial-scale biorefinery project are the need for financial support for green technology producers and financial incentives for industrial and private consumers to convert to bio-based products. The U.S. needs closer cooperation between the producers of agricultural products and the industry that makes the final product. Consequently, without ample government support, green technology projects will not be developed rapidly and in a substantial size to be able to realize the economies of scale needed. State and federal government collaboration and participation, including financial support, is imperative to the rapid development of incentives to ensure a sustained total conversion by the private sector and government to biobased lubricants and other industrial bioproducts. State and local governments can assist this industry by making certain that all of their fleets and those of their contractors use green oil.

09 BIOMASS FUELS↗

Design principles for heterointerfacial alloying kinetics at metallic anodes in rechargeable batteries

How surface chemistry influences reactions occurring thereupon has been a long-standing question of broad scientific and technological interest. Here, we consider the relation between the surface chemistry at interfaces and the reversibility of electrochemical transformations at rechargeable battery electrodes. Using Zn as a model system, we report that a moderate strength of chemical interaction between the deposit and the substrate—neither too weak nor too strong—enables highest reversibility and stability of the plating/stripping redox processes. Focused ion beam and electron microscopy were used to directly probe the morphology, chemistry, and crystallography of heterointerfaces of distinct natures. Analogous to the empirical Sabatier principle for chemical heterogeneous catalysis, our findings arise from competing interfacial processes. Using full batteries with stringent negative electrode–to–positive electrode capacity (N:P) ratios, we show that such knowledge provides a powerful tool for designing key materials in highly reversible battery systems based on Earth-abundant, low-cost metals such as Zn and Na.

25 ENERGY STORAGE↗