Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

An exploratory simulation study of a head-up display for general aviation lightplanes

The concept of a simplified head-up display referred to as a landing-site indicator (LASI) for use in lightplanes is discussed. Results of a fixed-base simulation study exploring the feasibility of the LASI concept are presented in terms of measurements of pilot performance, control-activity parameters, and subjective comments of four test subjects. These subjects, all of whom had various degrees of piloting experience in this type aircraft, performed a series of simulated landings both with and without the LASI starting from different initial conditions in the final approach leg of the landing maneuver.

Harris, R. L., Sr.↗

Lower body negative pressure, experiment M092

Evaluation of orthostatic intolerance has been achieved by the use of lower body negative pressure (LBNP). The LBNP technique, though independent of gravity, simulates its effect by exposing the legs and the lower abdomen to reduced ambient pressures. This LBNP experiment, conducted during the 56-day simulation of the Skylab environment, was designed to supply baseline information on cardiovascular responses to periodic orthostatic stress. Impaired orthostatic tolerance, manifested by the increased heart rate, diminished systolic and pulse pressure, and increased tendency to syncope in the upright position, or during LBNP, was not observed in this experiment.

Johnson, R. L.↗

An overview of artificial gravity

The unique characteristics of artificial gravity that affect human performance and physiology in an artificial gravity environment are reviewed. The rate at which these unique characteristics change decreases very rapidly with increasing radius of a rotating vehicle used to produce artificial gravity. Reducing their influence on human performance or physiology by increasing radius becomes a situation of very rapidly diminishing returns. A review of several elements of human performance has developed criteria relative to the sundry characteristics of artificial gravity. A compilation of these criteria indicates that the maximum acceptable rate of rotation, leg heaviness while walking, and material handling are the factors that define the minimum acceptable radius. The ratio of Coriolis force to artificial weight may also be significant. Based on current knowledge and assumptions for the various criteria, a minimum radius between 15.2 and 16.8 m seems desirable.

Ralph W. Stone Jr.↗

Landing performance by low-time private pilots after the sudden loss of binocular vision - Cyclops II

Study of low-time general aviation pilots, who, in a series of spot landings, were suddenly deprived of binocular vision by patching either eye on the downwind leg of a standard, closed traffic pattern. Data collected during these landings were compared with control data from landings flown with normal vision during the same flight. The sequence of patching and the mix of control and monocular landings were randomized to minimize the effect of learning. No decrease in performance was observed during landings with vision restricted to one eye, in fact, performance improved. This observation is reported at a high level of confidence (p less than 0.001). These findings confirm the previous work of Lewis and Krier and have important implications with regard to aeromedical certification standards.

Lewis, C. E., Jr.↗

Advanced Pioneer guidance and navigation requirements for outer planet missions

Three advanced Pioneer missions to the outer planets are analyzed to assess midcourse velocity and navigation requirements. Selecting the results of the Saturn/Uranus mission as representative values for the three missions, the Earth-Saturn midcourse mean plus 3-sigma velocity correction is 80 m/sec. Earth-based radio-only tracking results in a navigational error of 2000 km at Saturn which in turn requires a mean plus 3-sigma velocity correction of 140 m/sec on the Saturn-Uranus leg to nullify this error mapped to Uranus. In contrast to these figures, if a proposed optical V-slit sensor is incorporated into the spacecraft navigational system, a Saturn B-plane error of only 350 km results with a corresponding required mean plus 3-sigma post-Saturn velocity correction of 23.2 m/sec. An 8000 km miss at Uranus results from radio-only tracking at Saturn which can be considerably reduced to 1400 km by utilizing the optical sensor during the Saturn flyby.

Paul, C. K.↗

Lightweight orthotic braces

Leg brace is constructed of fiber-reinforced polymer material. Composite material is stiffer, stronger, and lighter than most metals.

Baucom, R. M.↗

Anthropometric changes and fluid shifts

Several observations of body size, shape, posture, and configuration were made to document changes resulting from direct effects of weightlessness during the Skylab 4 mission. After the crewmen were placed in orbit, a number of anatomical and anthropometric changes occurred including a straightening of the thoracolumbar spine, a general decrease in truncal girth, and an increase in height. By the time of the earliest in-flight measurement on mission day 3, all crewmen had lost more than two liters of extravascular fluid from the calf and thigh. The puffy facies, the bird legs effect, the engorgement of upper body veins, and the reduced volume of lower body veins were all documented with photographs. Center-of-mass measurements confirmed a fluid shift cephalad. This shift remained throughout the mission until recovery, when a sharp reversal occurred; a major portion of the reversal was completed in a few hours. The anatomical changes are of considerable scientific interest and of import to the human factors design engineer, but the shifts of blood and extravascular fluid are of more consequence. It is hypothesized that the driving force for the fluid shift is the intrinsic and unopposed lower limb elasticity that forces venous blood and then other fluid cephalad.

Thornton, W. E.↗

OMS engine shutoff valve and actuation system design and evaluation

Shutoff valve and actuation system concepts that are most suitable for the Orbital Maneuvering Systems engine application were determined. Emphasis was placed on the ten year and 100 mission life requirement, propellant and propellant residue compatibility and weight. It was found that poppet or ball valves utilizing electric or electropneumatic actuation were most applicable. Preliminary design layouts of a number of valve and actuation concepts were prepared and analyzed to make the optimum concept selection. Pneumatic actuation systems were required to feature their own pneumatic supply so that for the quad redundant valve, it was necessary to include two pneumatic supply systems, one for each of the series legs of the quad redundant package. The requirement for the pneumatic package placed heavy reliability, weight, and maintenance penalties upon electropneumatic actuation systems. The two valve and actuation systems concepts selected featured electric torque motor operation and a poppet as well as a ball valve concept with a retractable seal.

Wichmann, H.↗

Operational experiences of a commercial helicopter flown in a large metropolitan area

A survey of commercial helicopter-operating experiences was conducted using a helicopter flight recorder in order to provide a basis for extending helicopter design and service-life criteria. These data are representative of 182 flight hours accumulated during 1414 flights comprised of the separate legs of the total route structure employed. The operating experiences are presented in terms of the time spent within different airspeed brackets, within the classifiable flight conditions of climb, en route, and descent, at various rates of climb and descent, and at different rotor rotational speeds. The results indicated that the helicopter spent a majority of the flight time at airspeeds either below 40 knots or above 100 knots. Rates of climb and descent were concentrated at values below 5.1 m/s (1000 ft/min) particularly for higher airspeeds. Normal acceleration experiences were low, both in the total number and peak value realized; however, an extremely large number of pitch angular-velocity experiences were noted. Rotor rotational speeds were normal with no occurrences above the upper red-line limit.

Dicarlo, D. J.↗

Radiation belts of Jupiter - A second look

The outbound leg of the Pioneer 11 Jupiter flyby explored a region farther from the equator than that traversed by Pioneer 10, and the new data require modification or augmentation of the magnetodisk model based on the Pioneer 10 flyby. The inner moons of Jupiter are sinks of energetic particles and sometimes sources. A large spike of particles was found near Io. Multiple peaks occurred in the particle fluxes near closest approach to the planet; this structure may be accounted for by a complex magnetic field configuration. The decrease in proton flux observed near minimum altitude on the Pioneer 10 flyby appears attributable to particle absorption by Amalthea.

Fillius, R. W.↗

Development of Skylab medical equipment and flight preparations

The major medical systems in the Skylab orbital workshop are described. They comprise the food system, the waste management system, operational bioinstrumentation, personal hygiene, gas sampling, an inflight medical support system, and a cardiovascular counterpressure garment. Life sciences experiments carried out aboard Skylab are also reviewed; these include an ergometer and metabolic analyzer, a lower-body negative pressure device, an electrode harness and body temperature probe, a blood pressure cuff, a leg volume measuring band, sleep studies, a body-mass measuring device, a rotating litter chair, a blood sample processor, and small-mass measuring apparatus. All performance requirements were met with the equipment, and no failures were encountered.

Johnston, R. S.↗

Skylab task and work performance /Experiment M-151 - Time and motion study/

The primary objective of Experiment M151 was to study the inflight adaptation of Skylab crewmen to a variety of task situations involving different types of activity. A parallel objective was to examine astronaut inflight performance for any behavioral stress effects associated with the working and living conditions of the Skylab environment. Training data provided the basis for comparison of preflight and inflight performance. Efficiency was evaluated through the adaptation function, namely, the relation of performance time over task trials. The results indicate that the initial changeover from preflight to inflight was accompanied by a substantial increase in performance time for most work and task activities. Equally important was the finding that crewmen adjusted rapidly to the weightless environment and became proficient in developing techniques with which to optimize task performance. By the end of the second inflight trial, most of the activities were performed almost as efficiently as on the last preflight trial. The analysis demonstrated the sensitivity of the adaptation function to differences in task and hardware configurations. The function was found to be more regular and less variable inflight than preflight. Translation and control of masses were accomplished easily and efficiently through the rapid development of the arms and legs as subtle guidance and restraint systems.

Kubis, J. F.↗

Vestibular ataxia and its measurement in man

Methods involved in and results obtained with a new comprehensive ataxia test battery are described, and definitions of spontaneous and induced vestibular ataxia in man are given in terms of these findings. In addition, the topic of alcohol-induced ataxia in relation to labyrinth function is investigated. Items in the test battery comprise a sharpened Romberg test, in which the subject stands on the floor with eyes closed and arms folded against his chest, feet heel-to-toe, for 60 seconds; an eyes-open walking test; an eyes-open standing test; an eyes-closed standing test; an eyes-closed on-leg standing test; an eyes-closed walk a line test; an eyes-closed heel-to-toe walking test; and supplementary ataxia tests such as the classical Romberg test.

Fregly, A. R.↗

Response and adaptation of Beagle dogs to hypergravity

Eight male Beagle dogs, five months old, were centrifuged continuously for three months at progressively increasing loads. Heart rate and deep body temperature were monitored continuously by implant biotelemetry. Initially, centrifuged dogs showed transient decreases in heart rate and body temperature along with changes in their diurnal rhythm patterns. Compared with normal gravity controls, exposed dogs showed a slower growth rate and a reduced amount of body fat. Blood protein, total lipids, cholesterol, calcium, packed cell volume, red blood cell count, and hemoglobin were also decreased significantly. Absolute weights of the leg bones of centrifuged dogs were significantly greater than controls. Photon absorptiometry revealed significant density increases in selective regions of the femur and humerus of centrifuged dogs. In spite of the various changes noted, results from this and other studies affirm the view that dogs can tolerate and adapt to sustained loads as high as 2.5 g without serious impairment of their body structure and function.

Oyama, J.↗

Walking in a rotating space station, an electromyographic and kinematic study

Biomechanics were studied of locomotion in a rotating environment like that of a space station at various gravity levels. Comparisons were made of the walking gait patterns and the amplitudes of various leg muscle electrical outputs at different gravity levels. The results of these tests are applicable to planning future space missions by providing a part of the information that will be needed to determine the type of vehicle and the gravity level to be provided for the astronauts if it is decided that artificial gravity is to be utilized.

Harris, R. L.↗

DSS 14 operating noise temperature during Helios 1 near-sun tracking

When spacecraft are tracked near the line-of-sight of the sun, the ground antenna sidelobes see the solar noise. The solar noise increases the ground system operating noise temperature and degrades the downlink RF reception performance. At specific antenna azimuthal angles relative to the sun, noise peaks and nulls occur periodically throughout a day's tracking pass due to the quadripod support leg-generated sidelobes. This article documents this effect while tracking Helios 1, illustrates the time of the peaks, and compares the predicted time of the noise temperature peaks with the measured data.

Stelzried, C. T.↗

A mobile planetary lander utilizing elastic loop suspension

Efforts to increase the cost effectiveness of future lunar and planetary rover missions have led to the mobile lander concept, which replaces the landing legs of a soft-lander craft with a compact mobility system of sufficient strength to withstand the landing impact. The results of a mobile lander conceptual design effort based on existing NASA-Viking '75 hardware are presented. The elastic loop concept, developed as a post-Apollo rover technology, is found to meet stringent stowage, traction, power and weight requirements.

Trautwein, W.↗

Investigations of the 0.020-scale 88-OTS Integrated Space Shuttle Vehicle Jet-Plume Model in the NASA/Ames Research Center 11 by11-Foot Unitary Plan Wind Tunnel (IA80)

The results are documented of jet plume effects wind tunnel test of the 0.020-scale 88-OTS launch configuration space shuttle vehicle model in the 11 x 11 foot leg of the NASA/Ames Research Center Unitary Plan Wind Tunnel. This test involved cold gas main propulsion system (MPS) and solid rocket motor (SRB) plume simulations at Mach numbers from 0.6 to 1.4. Integrated vehicle surface pressure distributions, elevon and rudder hinge moments, and wing and vertical tail root bending and torsional moments due to MPS and SRB plume interactions were determined. Nozzle power conditions were controlled per pretest nozzle calibrations. Model angle of attack was varied from -4 deg to +4 deg; model angle of sideslip was varied from -4 deg to +4 deg. Reynolds number was varied for certain test conditions and configurations, with the nominal freestream total pressure being 14.69 psia. Plotted force and pressure data are presented.

Nichols, M. E.↗