Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Forcing Factors Affecting Sea Level Changes at the Coast

We review the characteristics of sea level variability at the coast focussing on how it differs from the variability in the nearby deep ocean. Sea level variability occurs on all timescales, with processes at higher frequencies tending to have a larger magnitude at the coast due to resonance and other dynamics. In the case of some processes, such as the tides, the presence of the coast and the shallow waters of the shelves results in the processes being considerably more complex than offshore. However, ‘coastal variability’ should not always be considered as ‘short spatial scale variability’ but can be the result of signals transmitted along the coast from 1000s km away. Fortunately, thanks to tide gauges being necessar-ily located at the coast, many aspects of coastal sea level variability can be claimed to be better understood than those in the deep ocean. Nevertheless, certain aspects of coastal variability remain under-researched, including how changes in some processes (e.g., wave setup, river runoff) may have contributed to the historical mean sea level records obtained from tide gauges which are now used routinely in large-scale climate research.

Philip L. Woodworth↗

Simulated X-59 on- and off-Design Sonic Boom Levels in Realistic Atmospheres for Noise Dose Range Estimation

NASA is planning several community noise surveys across the USA using the X-59 low-boom aircraft. These surveys require a range of noise levels to resolve a dose-response relationship. The X-59 was designed to produce a shaped sonic boom with a Stevens’ Perceived Level (PL) of 75 dB or less across the boom carpet in a standard atmosphere. However, the X-59’s flight condition can be adjusted to produce levels other than 75 PLdB to obtain a range of doses during community testing. Simulated nearfield pressure waveforms of the X-59 C612A in its on-design condition (Mach 1.4 at 53,200 ft) and an off-design condition at a lower altitude (Mach 1.4 at 46,000 ft) were propagated using PCBoom through realistic atmospheres over the span of one year at several locations across the country. The predicted on-design and off-design boom levels and carpet widths are presented, resulting in a preliminary estimate of the dose range that the X-59 may produce. Future work is planned with additional off-design conditions to assess the true capable dose range of the X-59.

X-59↗

Terra MODIS Sees Solar Eclipses: Analysis of Reflective Solar Band Response at Multiple Radiance Levels

The MODIS imaging spectroradiometer instruments on-board NASA's Terra and Aqua satellites have 20 reflective solar bands (RSB) covering a wavelength range from 400 to 2200 nm. Radiance is calculated from processing raw signals with background, temperature, and electronic contamination corrected. Measured gain is calibrated with a fully Sunlit solar diffuser (SD) at a stable radiance level, considering a slowly changing SD reflectance degradation. These measurements provide time-dependent gain adjustment factors, and the calibration assumes a linear response for each band and detector. Hence, an analysis of the dependence on different radiance levels is warranted. The MODIS design has no mechanism for varying radiance levels, except for an attenuator screen. However, it has been in static configuration for Terra since mid-2003. An external source of radiance attenuation can be utilized during solar eclipse events, while maintaining high stability and accuracy of solar calibration standards. Due to its long mission lifetime, Terra has seen several Sun-Moon near-conjunction events when it coincides with the orbit path where the SD is directly illuminated. As of August 2020, we have identified 7 viable partial solar eclipses in the Terra mission data. We will discuss several results of our study, including comparison of measured SD signal to predicted radiance reduction based on a solar disk radiance model; nominal and outlier behavior as a function of bands, detectors, and mirror-sides; and comparison with other data sets. Our main conclusion from this study is that there is no notable correlation of detector-dependent trend with radiance level for most RSB bands.

Terra↗

Southeast Michigan Health & Air Quality: Identifying Trends of Ground-level Ozone Precursors in Southeast Michigan and Northern Ohio

Pollutants resulting from industrial activity can react with sunlight to create ground-level ozone, a harmful pollutant that can exacerbate respiratory health issues such as asthma. Due to a history of heavy industrialization, residents of southeast Michigan and northern Ohio are especially susceptible to ground-level ozone. NASA DEVELOP, in partnership with the Michigan Department of Environment, Great Lakes, and Energy’s (EGLE) Air Quality Division and the Lake Michigan Air Directors Consortium (LADCO), investigated the effectiveness of Earth observations (EO) in monitoring pollutants that contribute to ground-level ozone. The team used the European Space Agency’s TROPOspheric Monitoring Instrument (TROPOMI) aboard Sentinel-5P, and NASA’s Ozone Monitoring Instrument (OMI) aboard Aura, to measure nitrogen dioxide (NO2), formaldehyde (HCHO), and methane (CH4) from 2019 to 2021 (May-September). The team oversampled the EO data on monthly, yearly, and 3-year time scales where possible to enhance more localized pollutant trends. Specifically, TROPOMI effectively monitored NO2 from space, indicating sub-city distributions on a monthly timescale. Contrastingly, the measurements of HCHO were predominately noisy, and therefore failed to show any distribution trends. Lastly, CH4 trends were identifiable yet coarse, hinting that EO monitoring in the case of CH4 is not beneficial for our partners. The end products provide the partners with insight on the utility of EO in measuring certain ozone precursors and can be used to guide ground-level ozone reduction strategies throughout the region.

Mariam Moeen↗

Effects of Spaceflight Relevant Carbon Dioxide Levels on Pathogenesis Related Microbial Characteristics

BACKGROUND Multiple stressors in the spaceflight environment have the potential to alter microbial pathogenesis and virulence characteristics, including microgravity, radiation, and hostile/confined conditions. This combination of factors may lead to a stacking of risks, potentially creating unexpected increase in the risk of infectious disease. One understudied variable is the higher CO2 atmospheric concentration. The current Spaceflight Maximum Allowance Concentration (SMAC) for 24-hour average CO2 is 0.4% (3 mm Hg). These elevated ambient CO2 levels aboard the ISS could potentially influence the diversity and phenotypic responses of the resident microbial communities from both the spacecraft environment (air, surface, water) and crewmembers (gut, nasal, skin microbiomes). METHODS For these studies, we will evaluate the response of Staphylococcus aureus, Streptococcus pneumoniae and Enterobacter aerogenes, which are opportunistic pathogens that are of medical significance and have been or are likely to be found aboard spacecraft. These microorganisms will be cultured in both spaceflight analog and control conditions at CO2levels representing terrestrial atmospheric concentration of 0.04% (0.3 mmHg), ISS elevated concentration of 0.4% (3 mm Hg), and an unexpected elevated concentration of 1 % (7.6 mmHg) to represent a worst case scenario. DISCUSSION Overwhelming evidence from studies performed in food microbiology, marine biology and terrestrial environmental biology suggest altered gene expression, selective bacterial inhibition, increased growth and diversity, and increased antibiotic resistance of bacterial communities individually and in biofilm formation when exposed to increased levels of CO2. While many of these findings are based on levels of CO2 higher than would be found during spaceflight exploration missions, the potential for subtle changes in CO2 levels to exacerbate infectious disease risks warrants an evaluation of pathogen responses to spaceflight CO2 conditions. Our study will provide answers to spaceflight relevant atmospheric conditions, as described in the Risk of Adverse Health Effects Due to Host-Microorganism Interaction (GapMicro 103).

A A Medina-Colorado↗

Achieving Global Consensus on Acceptable Sound Levels for Overland Supersonic Flight

The National Aeronautics and Space Administration has made a commitment to deliver to the International Civil Aviation Organization’s Committee on Aviation Environmental Protection (ICAO CAEP) data defining community response to sounds from supersonic aircraft designed such that their sonic boom is replaced with a soft “thump” sound. The dataset will be a correlation of public perceptions of these sounds to the corresponding acoustic levels. The data will support efforts to develop international standards for permissible noise from supersonic overflight. NASA is planning and preparing for a series of community overflight tests with the X-59, a unique research aircraft capable of generating the “sonic thump”. NASA will begin these tests in 2024. With an eye toward achieving global consensus for noise standards, NASA’s goal is that the community response data be as broadly representative of the response of the international population as possible. As such, NASA is engaging the international regulatory and research communities in both the planning and execution of these tests, through status briefings at ICAO CAEP-sponsored meetings and through workshops with international participation. As part of this outreach NASA held a virtual workshop in December 2021 focused on strategies and considerations for estimating noise exposure levels and conducting surveys to characterize community annoyance levels relative to the “thump” sounds. This paper will present an overview of NASA’s effort, with a focus on the plans and technical goals for the community response tests. In addition, results of the recent workshop will be briefed, including considerations and approaches for ensuring broad representativeness of results and approaches for estimation of the sound levels across the test community. Participant feedback from both the workshop and previous engagements will be discussed, along with how it is being addressed in NASA’s ongoing planning efforts.

Supersonic Flight↗

Effects of Spaceflight Relevant Carbon Dioxide Levels on Pathogenesis Related Microbial Characteristics

Multiple stressors in the spaceflight environment, including microgravity and radiation, have the potential to alter microbial pathogenesis and virulence characteristics. Understanding how these and other factors may exacerbate the risk of infectious disease for astronauts is important to ensure the success of the mission. One understudied question in our assessment of infectious disease risk is the contribution carbon dioxide (CO2) at atmospheric concentrations higher than would be observed in terrestrial settings. Previous terrestrial studies have shown altered gene expression, selective bacterial inhibition, increased growth and diversity, and increased antibiotic resistance of bacterial communities individually and in biofilms when exposed to increased levels of CO2. While many of these findings are based on levels of CO2 higher than would be found during spaceflight exploration missions, the potential for subtle changes in CO2 levels to exacerbate infectious disease risks warrants an evaluation of pathogen responses to spaceflight CO2 conditions. To address this question, we are evaluating the effects of elevated atmospheric CO2 on microbial concentration, diversity, and pathogenesis-related characteristics using medically significant microorganisms cultured at CO2 levels representing terrestrial atmospheric concentration (≈0.04 %), ISS elevated concentration (0.4 %), and an unexpectedly elevated concentration (1 %) to represent a worst-case scenario. To determine if microbial responses to these CO2 concentrations may be exacerbated in response to the spaceflight environment, microorganisms are being cultured under static conditions and both spaceflight analogue and control conditions using the Rotating Wall Vessel (RWV) bioreactor (Synthecon, Houston, TX). For these studies, we will evaluate the response of Staphylococcus aureus, Streptococcus pneumoniae, and Enterobacter aerogenes, which are opportunistic bacterial pathogens that are of medical significance and have been or are likely to be found aboard human-inhabited spacecraft. Bacteria will be evaluated individually and together as a consortium. The following Specific Aims are be investigated: Aim 1. Characterize the growth, diversity, and pathogenesis-related stress responses of medically significant microorganisms grown under multiple CO2 concentrations under static growth in a liquid medium. Stress responses include acid stress, oxidative stress, and thermal stress. Aim 2. Characterize the growth, diversity, and pathogenesis-related stress responses of medically significant microorganisms grown under multiple CO2 concentrations in both spaceflight analogue and control conditions. Stress responses include acid stress, oxidative stress, and thermal stress.

S G Thornhill↗

Making NASA GES DISC Level 2 Data GIS Analysis Ready

There are many valuable data hosted by NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for GIS applications in the areas of extreme weather events, climatic anomaly, and public health. However, using NASA Earth Science Data poses some challenges for GIS users. Many of these users are not experts in Earth Observation and have little knowledge about NASA's Earth science data. In the GIS community, GeoTiff is the most widely used raster format, whereas NASA's data is primarily in complex multidimensional netCDF and HDF formats. This complexity makes it difficult for GIS users, especially those who are unfamiliar with these formats. Although GIS software like ArcGIS has made progress in processing multidimensional netCDF data, certain issues still remain, particularly with level 2 data. In this study, we use TROPSpheric Monitoring instrument (TROPOMI) level 2 data as an example to demonstrate how to make such data GIS analysis ready. The process involves: 1. Creating a feature layer from the TROPOMI level 2 data. 2. Converting the feature layer to a gridded raster dataset. 3. Mosaicking gridded raster datasets into a raster dataset covering the entire desired extent. 4. Generating a symbology with a GIBS-specific style that aligns with the visual standards and requirements of GIBS. 5. Publishing image services. By performing these preprocessing and transformation steps, NASA level 2 data can be made compatible and ready for use within GIS software for various spatial analysis and visualization tasks.

Geographic Information System↗

AUTOMATED WATER LEVEL MEASUREMENTS IN SMALL-DIAMETER AQUIFER TUBES

Groundwater contaminated with hexavalent chromium, strontium-90, and uranium discharges into the Columbia River along approximately 16 km (10 mi) of the shoreline. Various treatment systems have and will continue to be implemented to eliminate the impact of Hanford Site contamination to the river. To optimize the various remediation strategies, it is important to understand interactions between groundwater and the surface water of the Columbia River. An automated system to record water levels in aquifer sampling tubes installed in the hyporheic zone was designed and tested to (1) gain a more complete understanding of groundwater/river water interactions based on gaining and losing conditions ofthe Columbia River, (2) record and interpret data for consistent and defensible groundwater/surface water conceptual models that may be used to better predict subsurface contaminant fate and transport, and (3) evaluate the hydrodynamic influence of extraction wells in an expanded pump-and-treat system to optimize the treatment system. A system to measure water levels in small-diameter aquifer tubes was designed and tested in the laboratory and field. The system was configured to allow manual measurements to periodically calibrate the instrument and to permit aquifer tube sampling without removing the transducer tube. Manual measurements were collected with an e-tape designed and fabricated especially for this test. Results indicate that the transducer system accurately records groundwater levels in aquifer tubes. These data are being used to refine the conceptual and numeric models to better understand interactions in the hyporheic zone of the Columbia River and the adjacent river water and groundwater, and changes in hydrochemistry relative to groundwater flux as river water recharges the aquifer and then drains back out in response to changes in the river level.

54 ENVIRONMENTAL SCIENCES↗

NSLS-II HIGH LEVEL APPLICATION INFRASTRUCTURE AND CLIENT API DESIGN

The beam commissioning software framework of NSLS-II project adopts a client/server based architecture to replace the more traditional monolithic high level application approach. It is an open structure platform, and we try to provide a narrow API set for client application. With this narrow API, existing applications developed in different language under different architecture could be ported to our platform with small modification. This paper describes system infrastructure design, client API and system integration, and latest progress. As a new 3rd generation synchrotron light source with ultra low emittance, there are new requirements and challenges to control and manipulate the beam. A use case study and a theoretical analysis have been performed to clarify requirements and challenges to the high level applications (HLA) software environment. To satisfy those requirements and challenges, adequate system architecture of the software framework is critical for beam commissioning, study and operation. The existing traditional approaches are self-consistent, and monolithic. Some of them have adopted a concept of middle layer to separate low level hardware processing from numerical algorithm computing, physics modelling, data manipulating, plotting, and error handling. However, none of the existing approaches can satisfy the requirement. A new design has been proposed by introducing service oriented architecture technology. The HLA is combination of tools for accelerator physicists and operators, which is same as traditional approach. In NSLS-II, they include monitoring applications and control routines. Scripting environment is very important for the later part of HLA and both parts are designed based on a common set of APIs. Physicists and operators are users of these APIs, while control system engineers and a few accelerator physicists are the developers of these APIs. With our Client/Server mode based approach, we leave how to retrieve information to the developers of APIs and how to use them to form a physics application to the users. For example, how the channels are related to magnet and what the current real-time setting of a magnet is in physics unit are the internals of APIs. Measuring chromaticities are the users of APIs. All the users of APIs are working with magnet and instrument names in a physics unit. The low level communications in current or voltage unit are minimized. In this paper, we discussed our recent progress of our infrastructure development, and client API.

43 PARTICLE ACCELERATORS↗

WHEN MODEL MEETS REALITY – A REVIEW OF SPAR LEVEL 2 MODEL AGAINST FUKUSHIMA ACCIDENT

The Standardized Plant Analysis Risk (SPAR) models are a set of probabilistic risk assessment (PRA) models used by the Nuclear Regulatory Commission (NRC) to evaluate the risk of operations at U.S. nuclear power plants and provide inputs to risk informed regulatory process. A small number of SPAR Level 2 models have been developed mostly for feasibility study purpose. They extend the Level 1 models to include containment systems, group plant damage states, and model containment phenomenology and accident progression in containment event trees. A severe earthquake and tsunami hit the eastern coast of Japan in March 2011 and caused significant damages on the reactors in Fukushima Daiichi site. Station blackout (SBO), core damage, containment damage, hydrogen explosion, and intensive radioactivity release, which have been previous analyzed and assumed as postulated accident progression in PRA models, now occurred with various degrees in the multi-units Fukushima Daiichi site. This paper reviews and compares a typical BWR SPAR Level 2 model with the “real” accident progressions and sequences occurred in Fukushima Daiichi Units 1, 2, and 3. It shows that the SPAR Level 2 model is a robust PRA model that could very reasonably describe the accident progression for a real and complicated nuclear accident in the world. On the other hand, the comparison shows that the SPAR model could be enhanced by incorporating some accident characteristics for better representation of severe accident progression.

42 ENGINEERING↗

Using Project Complexity Determinations to Establish Required Levels of Project Rigor

The concepts discussed in this paper 1) focus on using technical competencies and skills in making objective determinations regarding project complexity based on objective scoring criteria and 2) then using the complexity determinations to establish the level of rigor required in initiating, planning, executing, monitoring and controlling, and closing projects to maximize process efficiency. This paper presents a project complexity analysis methodology for defining the levels of project management process rigor a project team needs to employ to maximize project delivery efficiencies without compromising quality and performance. Methods for making project complexity determinations based on project lifecycle size, duration, organizational complexity, requirements, technology readiness, risk, and visibility are discussed. The paper correlates the levels of rigor needed by project management process groups given the determined level of project complexity. Next, the paper presents a graded approach to defining extent of team formation, planning documentation rigor, stakeholder communication rigor, requirements management rigor, acquisition planning, risk management, executing, and monitoring and controlling rigor dependent on project complexity determinations. Methods for integrating and aligning the project complexity determination methods into existing project management procedures and processes are also discussed as well as methods for training personnel in the use of the method and facilitating and monitoring effectiveness of implementation within an organization in which project delivery is a mission focus.

complexity, project, determination, management, tr↗

Thermal load leveling during silicon crystal growth from a melt using anisotropic materials

An apparatus for growing a silicon crystal substrate comprising a heat source, an anisotropic thermal load leveling component, a crucible, and a cold plate component is disclosed. The anisotropic thermal load leveling component possesses a high thermal conductivity and may be positioned atop the heat source to be operative to even-out temperature and heat flux variations emanating from the heat source. The crucible may be operative to contain molten silicon in which the top surface of the molten silicon may be defined as a growth interface. The crucible may be substantially surrounded by the anisotropic thermal load leveling component. The cold plate component may be positioned above the crucible to be operative with the anisotropic thermal load leveling component and heat source to maintain a uniform heat flux at the growth surface of the molten silicon.

36 MATERIALS SCIENCE↗

A County-Level Program to Assess Farming System Ecosystem Services

The survival of Florida’s biodiversity and economy is dependent on finding ways to balance farm economics with proper management of water and other natural resources. Taking on this challenge of maximizing the delivery of ecosystems services from agricultural production systems is the mandate of the Hendry County Sustainable Biofuels Center. Given that sea level rise is the overarching, long-term threat to the south Florida and its ecosystems, the most valuable ecosystems services for the state of Florida are those that mitigate climate change. Biofuels are put forward as one approach to forestalling climate change, but its value as an industry in providing this and other ecosystem services is unproven. The Sustainable Biofuels Center has developed a set of programs to both document and enhance the ecosystems services values of the evolving Florida biofuels industry. The Center engages in agricultural systems evaluation, sustainability indexing and sustainability research. Methods employed for documenting ecosystems services and costs include Life Cycle Assessment, Emergy Analysis, and optimization of cost-benefit functions. Radically new farming and economic compensation systems must be created and implemented if we are to achieve a successful agricultural business model built upon balanced revenue streams from these varied services. Accordingly, the Center also supports field research and demonstration projects to document the capacity for innovative farming systems to deliver ecosystems services such as water storage. To help promote the inclusion of ecosystems services considerations in farm operations, the program includes curriculum development at both the K-12 and college level, as well as programs to bring diverse stakeholders in to collaborative visioning process. Lastly, since county governments are often the level where new industry seek entry to the landscape, the Center is also developing metrics and tools through which economic development officers can evaluate business developer requests for tax breaks, land use changes and various other permissions and incentives against the economic and ecological benefits as well as any natural resource costs. Solving the underlying problem requires that agricultural lands provide society with a more balanced set of values in the form of food, energy, and ecosystem services through proper water, nutrient, and soil management. County-level programs can help realize that vision.

54 ENVIRONMENTAL SCIENCES↗

System and method for controlling ammonia levels in a selective catalytic reduction catalyst using a nitrogen oxide sensor

A system according to the principles of the present disclosure includes an air/fuel ratio determination module and an emission level determination module. The air/fuel ratio determination module determines an air/fuel ratio based on input from an air/fuel ratio sensor positioned downstream from a three-way catalyst that is positioned upstream from a selective catalytic reduction (SCR) catalyst. The emission level determination module selects one of a predetermined value and an input based on the air/fuel ratio. The input is received from a nitrogen oxide sensor positioned downstream from the three-way catalyst. The emission level determination module determines an ammonia level based on the one of the predetermined value and the input received from the nitrogen oxide sensor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Timing Is everything: quantifying regulatory and market readiness levels for technology transition policy analysis

People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and market acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Use of a State-Level Integrated Assessment Model for Policy Analysis: An Uncertainty Analysis of Energy and Water

This presentation discusses some recent uncertainty assessment work being done on climate policy issues at the state level. The work is being done with the Platform for Regional Integrated Modeling and Analysis (PRIMA), a new climate change policy assessment framework developed at Pacific Northwest National Laboratory in Richland and Seattle, Washington and College Park, Maryland. The central computaional engine of PRIMA is the Global Change Assessment Model (GCAM), a dynamic-recursive integrated assessment model of the world economy, climate policy, and climate change that that has been regionalized to provide policy analysis down to the level of U.S. states. The PRIMA framework also includes detailed sectoral models that address issues in the energy-land-water interface geospatially at the sub-national level as the climate change and socioeconomic change occur. This presentation illustrates two uncertainty analyses conducted with GCAM and with water demand and supply components of PRIMA. The energy uncertainty analysis was conducted with GCAM alone and examines the impact of aggressive residential and commercial building equipment standards across the United States in the context of socioeconomic and climate uncertainty. The analysis focuses on the impact on future net energy service costs under aggressive standards in the residential and commercial building sectors from 2005 to 2050. The analysis uses a combination of discrete scenarios and Monte Carlo sampling approaches to address uncertainties. Results for Arizona and Florida are used to illustrate whether aggressive building equipment standards save energy and reduce net energy service costs when compared with current standards. Analysis of the output indicates a robust result under a broad range of future socioeconomic, policy, and climate scenarios. The water uncertainty analysis demonstrates a multi-model approach used to bound the prospects for future water shortages in Florida, given socioeconomic uncertainty and future water supply under a future climate. In this analysis, water demands from GCAM are coupled with a water management model that simulates regulated streamflows and water supply deficits given naturalized streamflows, water demands, and reservoir operating rules. The naturalized streamflows are simulated with a regional earth system model coupled to a river routing model. The climate is obtained from a regional climate projection of the Intergovernmental Panel on Climate Change (IPCC) Representative Concentration Pathway 8.5 (RCP 8.5) for all of the river basins in the United States. GCAM is used in Monte Carlo mode to estimate the outer bounds of water demand given socioeconomic uncertainty and RCP 8.5 climate. Future water demand is downscaled to a river basin level for Florida in high, low, and middle cases and is compared with available water supply for the same region for RCP 8.5 climate to identify the potential location and severity of water shortages.

Climate change, policy, mitigation, impacts, uncer↗

Volatile Memory Extraction- Based Approach for Level 0-1 CPS Forensics

Most security analyzers operate on system state that is far removed from end-point components in cyber-physical systems (CPS) identified as level 0-1 in the Purdue Architecture Reference Architecture (PERA) [1]. For example, many operate on system logs and other data dumps to disks. Tremendous value that can be gained in cyber security forensics if low level details such as dynamic changes to volatile memory can be extracted and provided to more sophisticated analysis tools. However, obtaining detailed and dynamic system state at the level of volatile memory is extremely challenging [2]. Here, we attempt to apply IT memory forensic mechanisms to CPS end-point devices and statistically evaluate them. Our focus is to extract volatile and dynamically changing internal information form CPS 0-1 level devices, and design preliminary schemes to exploit that extracted information. This new capability of generating a sequence of volatile memory snapshots for offline, detailed and sophisticated analysis opens a new class of cyber security schemes for CPS forensic analysis. As a case study for our ongoing research, we apply the proposed methodology to Modicon PLC using Modbus protocol. We extract the memory layout and subject the device to read operations at the most critical regions of memory. Similarly, write operations are initiated to carefully determine memory locations (for example, bytes that hold the firmware version number). This capability of generating a sequence of volatile memory snapshots for offline, detailed and sophisticated analysis opens a new class of cyber security schemes for CPS forensic analysis. Also, the ability to dynamically make controlled modifications to specific memory locations opens the potential for new mechanisms such as taint analysis and watermarking.

Asmar Awad, Rima↗