Search NASA⌕ Search

SEARCH · Search NASA

Results for “MONOCRYSTALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Magnetism and Cluster Glass Dynamics in Geometrically Frustrated LuFe2O4

We report on the magnetic properties of high quality LuFe{sub 2}O{sub 4} single crystals grown by the floating zone method. dc and ac susceptibility measurements and analysis reveal a ferrimagnetic transition at -240 K followed by a re-entrant cluster glass transition below 225 K, with an additional magnetic transition around 170 K. Strong frequency dependence of the real ({chi}') and imaginary ('{double_prime}) parts of the ac susceptibility observed at both these temperatures indicate glassy behavior and we quantitatively fit the data to a cluster glass model, {tau} = {tau}{sub o}(T{sub f}/T{sub g}-1){sup -zv}. Our studies show that these multiple transitions are consistent with the picture of ferrimagnetic clusters in the iron oxide planes with triangular lattice configuration favoring spin frustration and glass dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of single crystal Fe{sub 1-x}Ga{sub x} thin films

Molecular beam epitaxy was used to deposit single crystal thin film Fe{sub 1-x}Ga{sub x} samples on ZnSe buffer layers grown on (001) and (110) single crystal GaAs substrates. The crystal quality of the GaAs surface and each deposited layer was monitored in situ by reflection high energy electron diffraction. The magnetic properties of the samples were characterized by vibrating sample magnetometry and ferromagnetic resonance (FMR). The FMR linewidth increases dramatically with Ga concentration while the cubic anisotropy term K{sub 1} switches sign.

36 MATERIALS SCIENCE↗

Real-time microstructure of shocked LiF crystals: Use of synchrotron x-rays

We describe the use of a third generation synchrotron facility to obtain in situ, real-time, x-ray diffraction measurements in plate impact experiments. Subnanosecond duration x-ray pulses were utilized to record diffraction data from pure and magnesium-doped LiF single crystals shocked along the [111] and [100] orientations. The peak stresses were 3.0 GPa for the [111] oriented LiF and between 3.0 and 5.0 GPa for the [100] oriented LiF. For these stresses, shock compression along [111] results in elastic deformation and shock compression along [100] results in elastic-plastic deformation. Because of the quality of the synchrotron x-ray pulses, both shifting and broadening of the diffraction data were obtained simultaneously. As expected, shifts for elastic compression and elastic-plastic compression in shocked LiF were consistent with uniaxial and isotropic lattice compression, respectively. More importantly, diffraction patterns from crystals shocked along [100] exhibited substantial broadening due to elastic-plastic deformation. The broadening indicates that the shocked LiF(100) crystals developed substructure with a characteristic size for coherently diffracting domains (0.1-10{micro}m) and a distribution of (100) microlattice-plane rotations ({approx} 1{sup o} wide). In contrast to the LiF(100) results, broadening of the diffraction pattern did not occur for elastically deformed LiF(111). Another important finding was that the amount of lattice disorder for shocked LiF(100) depends on the loading history; the broadening was larger for the magnesium-doped LiF(100) (large elastic precursor) than for ultrapure LiF(100) (small elastic precursor) shocked to the same peak stress. The data are simulated by calculating the diffraction pattern from LiF(100) with a model microstructure consisting of coherently diffracting domains. The lattice orientation and longitudinal strain is assumed uniform within domains, but they vary from domain to domain with Gaussian distributions. Simulations using such a model are in good agreement with the measured diffraction patterns. The principal finding from the present work is that synchrotron x-rays can provide real-time data regarding microstructure changes accompanying shock-induced deformation and structural changes.

43 PARTICLE ACCELERATORS↗

Single crystal growth and formation of defects in deuterium-tritium layers for inertial confinement nuclear fusion

We identify vapor-etched grain boundary grooves on the solid-vapor interface as the main source of surface roughness in the deuterium-tritium (D-T) fuel layers, which are solidified and then cooled. Current inertial confinement fusion target designs impose stringent limits to the cross-sectional area and total volume of these grooves. Formation of these grain boundaries occurs over time scales of hours as the dislocation network anneals and is inevitable in a plastically deformed material. Therefore, either cooling on a much shorter time scale or a technique that requires no cooling after solidification should be used to minimize the roughness.

36 MATERIALS SCIENCE↗

Pseudomorphic growth of organic semiconductor thin films driven by incommensurate epitaxy

A stable pseudomorphic phase of {alpha}-quaterthiophene, a well known organic semiconductor, is obtained by growing films with organic molecular beam epitaxy (OMBE) on a single crystal of another organic semiconductor, namely, tetracene. The structural characteristics of the new phase are investigated by monitoring in situ the OMBE process by reflectance anisotropy spectroscopy; thus assessing that incommensurate epitaxy is in this case, the driving force for tuning the molecular packing in organic molecular films and in turn, their solid state properties.

36 MATERIALS SCIENCE↗

A phenomenological thermodynamic potential for potassium niobate

A phenomenological thermodynamic potential in form of an eight-order polynomial of the Landau-Ginsburg-Devonshire (LGD) expansion has been determined for a bulk potassium niobate (KNbO3) single crystal. Such potential is tested by calculating the structural and ferroelectric properties including polarizations, dielectric constants, lattice constants, and phase transition temperatures as well as their shifts under the hydrostatic pressure. The fitted LGD energy expansion coefficients can be used in the phase-field model to explain and predict ferroelectric properties of the bulk and thin film KNbO3.

36 MATERIALS SCIENCE↗

Small anisotropy, weak thermal fluctuations, and high field superconductivity in Co-doped iron pnictide Ba(Fe1-xCox)2As2

We performed high-field magnetotransport and magnetization measurements on a single crystal of the 122-phase iron pnictide Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2}. Unlike the high-temperature superconductor cuprates and 1111-phase oxypnictides, Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2} showed practically no broadening of the resistive transitions under magnetic fields up to 45 T. We report the temperature dependencies of the upper critical field H{sub c2} both parallel and perpendicular to the c-axis, the irreversibility field H{sub irr}{sup c}(T), and a rather unusual symmetric volume pinning force curve F{sub p}(H) suggestive of a strong pinning nanostructure. The anisotropy parameter {gamma} = H{sub c2}{sup ab}/H{sub c2}{sup c} deduced from the slopes of dH{sub c2}{sup ab}/dT = 4.9 T/K and dH{sub c2}{sup c}/dT = 2.5 T/K decreases from -2 near T{sub c}, to -1.5 at lower temperatures, much smaller than {gamma} for 1111 pnictides and high-T{sub c} cuprates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elastic buckling of AlN ribbons on elastomeric substrate

For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting ''wavy'' ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to 277 {mu}m, which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.

36 MATERIALS SCIENCE↗

Quantum size effect as evidenced by small-angle X-ray scattering of In{sub 2}O{sub 3} nanoparticles

Indium oxide nanoparticles were synthesized by a surfactant-free room-temperature soft chemistry route. The medium particle size of the thermally treated gel was evaluated by X-ray diffraction experiments, nitrogen adsorption measurements, transmission electron microscopy observations and small-angle X-ray scattering using synchrotron radiation. The main results show the single-crystalline nature of the prepared nanoparticles with 8 nm in diameter. The photoluminescence emission spectrum at room-temperature shows a broad peak with onset at, approximately, 315 nm as a result of quantum size effect produced by a small population of nanoparticles with average size of about 2.8 nm as revealed by small-angle X-ray scattering.

36 MATERIALS SCIENCE↗

Ultrathin amorphization of single-crystal silicon by ultraviolet femtosecond laser pulse irradiation

The mechanisms of amorphization for crystalline Si (c-Si) induced by ultraviolet femtosecond laser irradiation are described in this paper. The wavelength of the laser pulse was 267 nm, which is the third harmonics of a Ti:sapphire laser. We performed a laser scanning microscopy and a transmission electron microscopy for surface and structural analysis and imaging pump-probe measurements to investigate the dynamics of the process. From the analyses, we confirmed that the thickness of the amorphized layer was quite uniform and there is no lattice defect under the amorphized section. The thickness of the amorphous Si (a-Si) layer was 7 nm and the threshold fluence of the amorphization was 44 mJ/cm{sup 2}. From the Imaging Pump-Probe measurement it was revealed that the melting time is less than 1 ns and ultra high speed melting and re-solidification process was occurred. The melting depth estimated by the Imaging Pump-Probe measurement was 7 nm. The melted portion completely corresponded to the amorphized section.

36 MATERIALS SCIENCE↗

Enhancement of the electromechanical response in ferroelectric ceramics by design

It is demonstrated based on continuum mechanics modeling and simulation that it is possible to obtain polycrystalline ceramic ferroelectric (FE) materials which beggar single crystals in electromechanical properties. The local inhomogeneities at the FE domain-scale level due to spontaneous polarization and the underlying anisotropy are taken into consideration in the framework of mathematical homogenization of physical properties in FE materials. The intrinsic randomness of the spatial distribution of polarization is shown to be judiciously employed for the design of better polycrystalline FEs. The noncollinear rotation of the net polarization vectors embedded in crystallites of the ceramic FEs is demonstrated to play the key role in the enhancement of physical properties.

36 MATERIALS SCIENCE↗

Conversion method of powder inelastic scattering data for one-dimensional systems

Extracting dispersive magnetic excitations from inelastic neutron scattering data usually requires large single crystals. We present a simple yet powerful method for extracting such information from polycrystalline or powder data for one-dimensional systems. We demonstrate the effectiveness of this data treatment by extracting dispersion curves from powder inelastic neutron scattering data on the one-dimensional spin-half systems: CuGeO3 and Rb2Cu2Mo3O12. For many such materials it is not possible to grow sufficiently large crystals and this method offers a quick and efficient way to study their magnetic excitations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preparation and structure characterization of SmCo{sub 5}(0001) epitaxial thin films grown on Cu(111) underlayers

SmCo{sub 5}(0001) epitaxial films were prepared on Cu(111) single-crystal underlayers formed on Al{sub 2}O{sub 3}(0001) substrates at 500 deg. C. The nucleation and growth mechanism of (0001)-oriented SmCo{sub 5} crystal on Cu(111) underlayer is investigated and a method to control the nucleation is proposed. The SmCo{sub 5} epitaxial thin film formed directly on Cu underlayer consists of two types of domains whose orientations are rotated around the film normal by 30 deg. each other. By introducing a thin Co seed layer on the Cu underlayer, a SmCo{sub 5}(0001) single-crystal thin film is successfully obtained. Nucleation of SmCo{sub 5} crystal on Cu underlayer seems controllable by varying the interaction between the Cu underlayer and the SmCo{sub 5} layer.

36 MATERIALS SCIENCE↗

Atomic layer deposition of Cu{sub 2}S for future application in photovoltaics.

Alternating exposure to bis(N,N{prime}-di-sec-butylacetamidinato)dicopper(I) and hydrogen sulfide is shown to produce high quality chalcocite (Cu{sub 2}S) thin films by atomic layer deposition on silicon and fused silica substrates. The layer-by-layer chemical vapor deposition method enables conformal growth of the phase-pure material at 130 C. X-ray diffraction reveals that polycrystalline high-chalcocite films are deposited preferentially oriented in the <00l> plane. The optical properties of this naturally p-type absorber compare well with previous reports on single crystals, highlighting the applicability of the technique to nanostructured photovoltaics.

36 MATERIALS SCIENCE↗

Low temperature Schottky anomalies in the specific heat of LaCoO{sub 3} : defect-stabilized finite spin states.

Measurement of the low temperature specific heat of LaCoO{sub 3} single crystals reveals a previously unobserved Schottky anomaly with an energy level splitting, 0.5 meV, that is associated with the first excited spin state of the Co{sup 3+} ion. These states persist well below 2 K and have a g-factor around 3.5, consistent with the high-spin spin-orbit triplet, implying the existence of a low density (approximately 0.1% of the sites) of finite-spin Co ions even in the T = 0 limit. We propose that these states are trapped at defects and are consistent with the magnetic excitons observed in earlier work.

36 MATERIALS SCIENCE↗

Amorphization and dynamic annealing of hexagonal SiC upon heavy-ion irradiation: Effects on swelling and mechanical properties

Structural, mechanical, and dimensional evolutions of silicon carbide (SiC) induced by heavy-ion irradiations are studied by means of Rutherford backscattering spectrometry and channeling (RBS/C), nanoindentation, and surface profilometry measurements. 4H- and 6H-SiC single crystals were irradiated with 4 MeV Au{sup 2+} and 4 MeV Xe{sup +} ions at room temperature (RT) or 400 deg. C. Using a Monte Carlo program to simulate the RBS/C spectra (MCCHASY code), we find that Au ion irradiation at RT induces a total silicon sublattice disorder related to full amorphization at a dose of about 0.4 displacement per atom (dpa). A two-step damage process is found on the basis of the disordered fractions deduced from RBS/C data. Complete amorphization cannot be reached upon both Au and Xe ion irradiations at 400 deg. C up to about 26 dpa because of the dynamic annealing of defects. When complete amorphization is reached at RT, the Young's modulus and Berkovich hardness of irradiated 6H-SiC samples are lower by, respectively, 40% and 45% than those of the virgin crystals. The out-of-plane expansion measured by surface profilometry increases versus irradiation dose and the saturation value measured in the completely amorphous layer (normalized to the ion projected range) is close to 25%. We show that the modifications of the macroscopic properties are mainly due to the amorphization of the material. The macroscopic elasticity constants and dimensional properties are predicted for a composite material made of crystalline matrix containing dispersed amorphous inclusions using simple analytical homogenization models. Voigt's model seems to give the best approximation for disordered fractions larger than 20% in the second step of the damage process.

36 MATERIALS SCIENCE↗

Epitaxial Mn{sub 2.5}Ga thin films with giant perpendicular magnetic anisotropy for spintronic devices

We report on epitaxial growth and magnetic properties of Mn{sub 2.5}Ga thin films, which were deposited on Cr/MgO single crystal substrates by magnetron sputtering. X-ray diffraction results revealed the epitaxial relationships as Mn{sub 2.5}Ga(001)[100] parallel Cr(001)[110] parallel MgO(001)[100]. The presence of (002) and (011) superlattice peaks indicates that the films were crystallized into DO{sub 22} ordered structures. The perpendicular magnetic anisotropy (PMA) properties were found to be related to the extent of DO{sub 22} chemical ordering. A giant PMA (K{sub u}{sup eff}=1.2x10{sup 7} erg/cm{sup 3}) and low saturation magnetization (M{sub s}=250 emu/cm{sup 3}) can be obtained for the film with highest chemical ordering parameter (S=0.8)

36 MATERIALS SCIENCE↗

Ultrafast photovoltaic effects in miscut Nb-doped SrTiO{sub 3} single crystals

Picosecond photovoltaic effect in miscut Nb-doped SrTiO{sub 3} single crystal has been observed under ultraviolet pulsed laser irradiation at ambient temperature without an applied bias. The 10%-90% rise time and the full width at half maximum are 828 and 670 ps, respectively, which is faster than that of exact cut Nb-doped SrTiO{sub 3} single crystal. A model based on terrace structure is put forward to explain the observation.

36 MATERIALS SCIENCE↗