Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Damping mechanisms in alumina borate whisker-reinforced-aluminum matrix composites with or without SnO{sub 2} coatings

SnO{sub 2} was successfully coated on the surface of alumina borate whiskers. The pure aluminum matrix composites reinforced with a SnO{sub 2}-coated alumina borate whisker were fabricated by squeeze casting. The effects of coating contents on the damping properties of the coated composites at various temperatures, frequencies, and strain amplitudes were examined. The microstructures of the coated composites were also investigated through transmission electron microscopy observations. These results indicate that the introduction of Sn at the interface between whisker and matrix in the coated composites during the squeeze casting process alters not only the interface structures but also the dislocation status of the matrices in the vicinity of the interface. The results of damping characterization indicate that the damping capacities of the coated composites strongly depend on the coating contents and strain amplitudes. A damping peak at low temperatures appeared not only in the coated composites but also in the noncoated one, which is related to dislocation motion and interfacial slip caused by Sn. A damping peak at high temperatures appeared only in the coated composites, and the damping mechanisms at high temperature change with the increase in strain amplitudes. Sn played an important role on the damping mechanisms of the coated composites all along.

36 MATERIALS SCIENCE↗

Crystallization of sputtered-deposited and ion implanted amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films

X-ray diffraction and transmission electron microscopy have been utilized to measure the ion irradiation-induced modification in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films. The isothermal crystallization of sputtered-deposited and Sb{sup +} ion irradiated amorphous samples has been studied, focusing on the evolution of the microstructure during the initial stage of the transformation. In both samples, the amorphous to crystal transition occurs through the nucleation of face centered cubic (fcc) crystal domains at the film surface. A fast bidimensional growth of the crystalline nuclei in the sputtered-deposited films occurs by the generation of transrotational grains. The lattice parameter decreases as the crystalline fraction increases above 80%, and it approaches the fcc bulk value at the end of the transformation. Ion irradiation produces a densification of the deposited amorphous film (approx4% vertical shrinkage measured by atomic force microscopy) and an enhancement of the crystallization rate. Even in the irradiated amorphous, the nucleation occurs at the film surface and proceeds by the growth of the grains through the thickness of the layer although the density of the transrotational grains is strongly reduced with respect to the unirradiated amorphous. A link between the ion beam induced densification and the reduction of transrotational grains is proposed.

36 MATERIALS SCIENCE↗

Comprehensive Micromechanics-Analysis Code - Version 4.0

Version 4.0 of the Micromechanics Analysis Code With Generalized Method of Cells (MAC/GMC) has been developed as an improved means of computational simulation of advanced composite materials. The previous version of MAC/GMC was described in "Comprehensive Micromechanics-Analysis Code" (LEW-16870), NASA Tech Briefs, Vol. 24, No. 6 (June 2000), page 38. To recapitulate: MAC/GMC is a computer program that predicts the elastic and inelastic thermomechanical responses of continuous and discontinuous composite materials with arbitrary internal microstructures and reinforcement shapes. The predictive capability of MAC/GMC rests on a model known as the generalized method of cells (GMC) - a continuum-based model of micromechanics that provides closed-form expressions for the macroscopic response of a composite material in terms of the properties, sizes, shapes, and responses of the individual constituents or phases that make up the material. Enhancements in version 4.0 include a capability for modeling thermomechanically and electromagnetically coupled ("smart") materials; a more-accurate (high-fidelity) version of the GMC; a capability to simulate discontinuous plies within a laminate; additional constitutive models of materials; expanded yield-surface-analysis capabilities; and expanded failure-analysis and life-prediction capabilities on both the microscopic and macroscopic scales.

Arnold, S. M.↗

Effective properties of a fly ash geopolymer: Synergistic application of X-ray synchrotron tomography, nanoindentation, and homogenization models

Microstructural and micromechanical investigation of a fly ash-based geopolymer using: (i) synchrotron X-ray tomography (XRT) to determine the volume fraction and tortuosity of pores that are influential in fluid transport, (ii) mercury intrusion porosimetry (MIP) to capture the volume fraction of smaller pores, (iii) scanning electron microscopy (SEM) combined with multi-label thresholding to identify and characterize the solid phases in the microstructure, and (iv) nanoindentation to determine the component phase elastic properties using statistical deconvolution, is reported in this paper. The phase volume fractions and elastic properties are used in multi-step mean field homogenization (Mori–Tanaka and double inclusion) models to determine the homogenized macroscale elastic modulus of the composite. The homogenized elastic moduli are in good agreement with the flexural elastic modulus determined on macroscale paste beams. The combined use of microstructural and micromechanical characterization tools at multiple scales provides valuable information towards the material design of fly ash geopolymers.

36 MATERIALS SCIENCE↗

On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint

It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physicaldamage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations andreinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

14 SOLAR ENERGY↗

An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy

The influences of deformation, heat treatment temperature and holding time on morphology and size distribution of Si containing eutectic phases of Thixocast Al-7Si-0.4 Mg alloy were investigated. The novel thermo-mechanical treatment consisted of initial cold working practice followed by a solution heat treatment at 540 deg. C for durations ranging from 2 min to 120 min followed by water quenching. Optical and scanning electron microscopes were used to study the influence of process parameters on microstructure evolution. Also, final mechanical properties were investigated using hardness test. The results indicate that, under appropriate conditions it is possible to achieve an ultrafine grain microstructure with the eutectic Si fibers fragmented and spheroidized in the entire microstructure. It was also found that, an agglomeration of sphrodized particles occurs and is governed by Ostwald ripening mechanism.

36 MATERIALS SCIENCE↗

Stereological characterization of {gamma}' phase precipitation in CMSX-6 monocrystalline nickel-base superalloy

The purpose of this investigation was to study in detail the means to quantitatively evaluate {gamma}' phase precipitation. Many of the mechanical properties of superalloys are directly influenced by the presence of the {gamma}' (gamma prime) precipitate phase dispersed in a {gamma} matrix phase. The {gamma}' precipitates act as effective barriers to dislocation motion and restrict plastic deformation, particularly at high temperatures. Due to this, it is essential to accurately quantify the {gamma}' precipitate size, volume fraction and distribution. Investigations based on quantitative metallography and image analysis were performed on a monocrystalline nickel-base superalloy taking into consideration various {gamma}' precipitate sizes present in that alloy microstructure. The authors of the present paper propose a new method of quantifying the total volume fraction of the {gamma}' phase applying images of the microstructure with {gamma}' phase precipitates registered using light microscopy, scanning electron microscopy (at two different magnifications) and scanning transmission electron microscopy.

36 MATERIALS SCIENCE↗

Effect of PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} thin layer on structure, electronic and magnetic properties of La{sub 0.65}Sr{sub 0.35} MnO{sub 3} and La{sub 0.65}Ca{sub 0.30}MnO{sub 3} thin-films

Epitaxial thin film heterostructures of high dielectric PbZr{sub 1-x}Ti{sub x}O{sub 3} (PZT) and La{sub 1-x}A{sub x}MnO{sub 3} (A-divalent alkaline earth metals such as Sr (LSMO) and Ca (LCMO)) were grown on SrTiO{sub 3} substrates and their structure, temperature dependence of electrical resistivity, and magnetization were investigated as a function of the thickness of the LSMO(LCMO) layer. The microstructures of the samples were analyzed by TEM. By applying an electric field across the PZT layer, we applied a ferrodistortive pressure on the manganite layer and studied the correlations between lattice distortion and electric transport and magnetic properties of the CMR materials.

36 MATERIALS SCIENCE↗

Influence of thermomechanical processing on elevated temperature slow plastic flow properties of B2 aluminide Fe-39.8at.% Al

A study of the elevated temperature slow plastic flow properties of the B2 aluminide Fe-39.8at.% Al was undertaken. Polycrystalline materials possessing several different microstructures were produced by the hot extrusion of prealloyed powder and, in some cases, postextrusion heat treatments. Compression tests were conducted in air at 1200, 1300 and 1400 K. Such testing revealed that the extrusion temperature affected the active deformation mechanisms where material extruded at 1505 K had a stress exponent about twice that of the intermetallic extruded at 1200 K. Grain size refinement to about 10 microns was found to strengthen the Fe-39.8at.% Al material; unfortunately, the effectiveness of such strengthening is limited to a homologous temperature of about 0.75 for strain rates of commercial interest (less than 10 to the -7th/sec).

Whittenberger, J. D.↗

Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes

The long term behaviour of cement based materials is strongly dependent on the paste microstructure and also on the internal chemistry. A CEM V blended cement containing pulverised fly ash (PFA) and blastfurnace slag (BFS) has been studied in order to understand hydration processes which influence the paste microstructure. Solid-state NMR spectroscopy with complementary X-ray diffraction analysis and selective dissolution techniques have been used for the characterization of the various phases (C{sub 3}S, C{sub 2}S, C{sub 3}A and C{sub 4}AF) of the clinker and additives and then for estimation of the degree of hydration of these same phases. Their quantification after simulation of experimental {sup 29}Si and {sup 27}Al MAS NMR spectra has allowed us to follow the hydration of recent (28 days) and old (10 years) samples that constitutes a basis of experimental data for the prediction of hydration model.

36 MATERIALS SCIENCE↗

Reduction of chromium in Ni-base superalloys through element substitution and rapid solidification processing

The reduction in the use of Cr in Ni base superalloys by the combined approaches of both elemental substitution and rapid solidification processing is studied. The elements Si, Zr, Y and Hf were chosen as potential partial substitutes for Cr in Waspaloy and IN 713LC sine their separate addition to other alloys has previously resulted in enhanced oxidation resistance. The roles of Cr and these replacement elements in determining the microstructure and properties are evaluated. The elements Si, Zr, and Y and Hf are used as partial replacements for Cr in the base superalloys and these resultant alloys are processed using rapid solidification techniques. The mechanical properties and oxidation resistance of the processed materials are evaluated. The microstructure is characterized using state of the art techniques (e.g. analytical transmission electron microscopy), and the mechanism by which these structures are produced is determined.

Fraser, H. D.↗

In situ Resource Utilization for Processing of Metal Alloys on Lunar and Mars Bases

Current plans for practical missions leading to a sustained human presence on our Moon and Mars rely on utilizing their in situ resources. Initially, resource availability must be assessed followed by the development of economically acceptable and technically feasible extractive processes. In regard to metals processing and fabrication, the lower gravity level on the Moon (0.125 g) and Mars (0.369 g) will dramatically change the presently accepted hierarchy of materials in terms of specific properties, a factor which must be understood and exploited. Furthermore, significant changes are expected in the behavior of liquid metals during processing. In metal casting, for example, mold filling and associated solidification processes have to be reevaluated. Finally, microstructural development and therefore material properties, presently being documented through ongoing research in microgravity science and applications, needs to be understood and scaled to the reduced gravity environments. These and other issues are addressed in this paper.

Stefanescu, D. M.↗

Effect of transport mechanism on the coarsening of bicontinuous structures: A comparison between bulk and surface diffusion

Here, coarsening of bicontinuous microstructures is observed in a variety of systems, such as nanoporous metals and mixtures that have undergone spinodal decomposition. To better understand the morphological evolution of these structures during coarsening, we compare the morphologies resulting from two different coarsening mechanisms, surface and bulk diffusion. We perform phase-field simulations of coarsening via each mechanism in a two-phase mixture at nominal volume fractions of 50%-50% and 36%-64%, and the simulated structures are characterized in terms of topology (genus density), the interfacial shape distribution, structure factor, and autocorrelations of phase and mean curvature. We observe self-similar evolution of morphology and topology and agreement with the expected power laws for dynamic scaling, in which the characteristic length scale increases over time proportionally to t 1/4 for surface diffusion and t 1/3 for bulk diffusion. While we observe the expected difference in the coarsening kinetics, we find that differences in self-similar morphology due to coarsening mechanism are relatively small, although typically they are larger at 36% volume fraction than at 50% volume fraction. In particular, we find that bicontinuous structures coarsened via surface diffusion have lower scaled genus densities than structures coarsened via bulk diffusion. We also compare the self-similar morphologies to those in literature and to two model bicontinuous structures, namely, constant-mean-curvature surfaces based on the Schoen G minimal surface and random leveled-wave structures. The average scaled mean curvatures of these model structures agree reasonably with those of the coarsened structures at both 36% and 50%, but we find substantial disagreements in the scaled genus densities and the standard deviations of mean curvature.

36 MATERIALS SCIENCE↗

Deformation Mechanism of Age Hardened Alloy 709 Materials

This report provides an in-depth study of the microstructures of creep-deformed Alloy 790 materials. Five specimens, all creep-tested at 600°C under 330 MPa to failure, were investigated. The creep specimens were machined from plates fabricated by different melt practices, Argon Oxygen Decarburization (AOD), or AOD followed by Electroslag remelting (ESR), and different heat treatments: 1100 or 1150°C Solution Anneal (SA), and some with additional Precipitation Treatment (PT) of 775°C for 10 hours. TEM samples were made from the gauge and the grip sections of each creep-deformed specimen. Bright-field (BF) imaging, high-angle annular dark field (HAADF) imaging, and energy dispersive x-ray spectroscopy (EDS) using a scanning transmission electron microscope (STEM) were carried out on all the samples.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Interfacial structure in Telluride-based thermoelectric materials.

Chalcogenide compounds based on the rocksalt and tetradymite structures possess good thermoelectric properties and are widely used in a variety of thermoelectric devices. Examples include PbTe and AgSbTe2, which have the rocksalt structure, and Bi2Te3, Bi2Se3, and Sb2Te3, which fall within the broad tetradymite-class of structures. These materials are also of interest for thermoelectric nanocomposites, where the aim is to improve thermoelectric energy conversion efficiency by harnessing interfacial scattering processes (e.g., reducing the thermal conductivity by phonon scattering or enhancing the Seebeck coefficient by energy filtering). Understanding the phase stability and microstructural evolution within such materials is key to designing processing approaches for optimal thermoelectric performance and to predicting the long-term nanostructural stability of the materials. In this presentation, we discuss our work investigating relationships between interfacial structure and formation mechanisms in several telluride-based thermoelectric materials. We begin with a discussion of interfacial coherency and its special aspects at interfaces in telluride compounds based on the rocksalt and tetradymite structures. We compare perfectly coherent interfaces, such as the Bi2Te3 (0001) twin, with semi-coherent, misfitting interfaces. We next discuss the formal crystallographic analysis of interfacial defects in these systems and then apply this methodology to high resolution transmission electron microscopy (HRTEM) observations of interfaces in the AgSbTe2/Sb2Te3 and PbTe/Sb2Te3 systems, focusing on interfaces vicinal to {l_brace}111{r_brace}/{l_brace}0001{r_brace}. Through this analysis, we identify a defect that can accomplish the rocksalt-to-tetradymite phase transformation through diffusive-glide motion along the interface.

36 MATERIALS SCIENCE↗

Secondary phase segregation in heavily transition metal implanted ZnO

With micro-Raman spectroscopy and x-ray diffraction (XRD), we studied ZnO crystals implanted with Mn, Fe, Co, and Ni, respectively, with implantation concentrations from 4 up to 16 at. %. Using thermal treatments in air up to 700 deg. C, we analyzed the annealing effect on the ZnO crystal lattice as well as the onset of secondary phases and their microstructure on the sample surface. While the 500 deg. C treatment induces a considerable annealing, secondary phases are observed for transition metal (TM) concentrations >=8 at. % after the treatment at 700 deg. C. Their microstructure strongly depends on the TM species. Various stoichiometric and nonstoichiometric TM oxide precipitates as well as elemental TM clusters are identified by their Raman and XRD signatures and their possible magnetic impact is discussed.

36 MATERIALS SCIENCE↗

Plasma Sprayed Hydroxyapatite Coatings: Influence of Spraying Power on Microstructure

The plasma sprayed hydroxyapatite (HA) coatings are used on metallic implants to enhance the bonding between the implant and bone in human body. The coating process was implemented at different spraying power for each spraying condition. The coatings formed from a rapid solidification of molten and partly molten particles that impact on the surface of substrate at high velocity and high temperature. The study was concentrated on different spraying power that is between 23 to 31 kW. The effect of different power on the coatings microstructure was investigated using scanning electron microscope (SEM) and phase composition was evaluated using X-ray diffraction (XRD) analysis. The coatings surface morphology showed distribution of molten, partially melted particles and some micro-cracks. The produced coatings were found to be porous as observed from the cross-sectional morphology. The coatings XRD results indicated the presence of crystalline phase of HA and each of the patterns was similar to the initial powder. Regardless of different spraying power, all the coatings were having similar XRD patterns.

36 MATERIALS SCIENCE↗

Effect of LID (Registered) processing on the microstructure and mechanical properties of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo titanium foil-gauge materials

A study was undertaken to determine the mechanical properties and microstructures resulting from Liquid Interface Diffusion (LID -Registered) processing of foil-gauge specimens of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo coated with varying amounts of LID material. In addition, the effects of various elevated temperature exposures on the concentration profiles of the LID alloying elements were investigated, using specimens with a narrow strip of LID material applied to the surface. Room and elevated temperature tensile properties were determined for both coated and uncoated specimens. Optical microscopy was used to examine alloy microstructures, and scanning electron microscopy to examine fracture surface morphologies. The chemical concentration profiles of the strip-coated specimens were determined with an electron microprobe.

Balckburn, Linda B.↗