Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mix Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Effect of Inlet Throttling on Thermohydraulic Instability in a Large Scale Waterbased RCCS: A System-Level Analysis with RELAP5-3D

This paper presents results from system -level modeling of a water -based reactor cavity cooling system using RELAP5-3D. The computational model is benchmarked with experimental data from a half -scale RCCS test facility at Argonne National Laboratory. The model prediction is first compared with a two-phase oscillatory baseline experimental case where mixed accuracy is obtained. The model shows reasonable prediction of mass flow rate, pressure, and temperature but significant overprediction of void fraction. The model prediction is then compared with a fault case where the inlet of the risers is gradually reduced using a throttling valve. As the valve is closed, the model is able to predict some major flow phenomena observed in the experiment such as the dampening of oscillations, the reintroduction of oscillations, as well as boiling, flashing, and geysering in the risers. However, the timeline of these events are not well captured by the model. The model is also used to investigate the evolution of flow regime in the chimney. This work highlights that the semiempirical constitutive relations used in RELAP-3D could have a strong influence on the accuracy of the model in two-phase oscillatory flows.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advancing Organized Convection Representation in the Unified Model: Implementing and Enhancing Multiscale Coherent Structure Parameterization

To address the effect of stratiform latent heating on meso- to large-scale circulations, an enhanced implementation of the Multiscale Coherent Structure Parameterization (MCSP) is developed for the Met Office Unified Model. MCSP represents the top-heavy stratiform latent heating from under-resolved organized convection in general circulation models. We couple the MCSP with a mass-flux convection scheme (CoMorph-A) to improve storm lifecycle continuity. The improved MCSP trigger is specifically designed for mixed-phase deep convective cloud, combined with a background vertical wind shear, both known to be crucial for stratiform development. We also test a cloud top temperature dependent convective-stratiform heating partitioning, in contrast to the earlier fixed partitioning. Assessments from ensemble weather forecasts and decadal simulations demonstrate that MCSP directly reduces cloud deepening and precipitation areas by moderating mesoscale circulations. Indirectly, it amends tropical precipitation biases, notably correcting dry and wet biases over India and the Indian Ocean, respectively. Remarkably, the scheme outperforms a climate model ensemble by improving seasonal precipitation cycle predictions in these regions. The scheme also improves Madden-Julian Oscillation (MJO) spectra, achieving better alignment with observational and reanalysis data by intensifying the simulated MJO over the Indian Ocean during phases 4 to 5. However, the scheme increases precipitation overestimation over the Western Pacific. Shifting from fixed to temperature-dependent convective-stratiform partitioning reduces the Pacific precipitation overestimation and further improves the seasonal cycle in India. Spatially correlated biases highlight the necessity for advances beyond deterministic approaches to align MCSP with environmental conditions.

54 ENVIRONMENTAL SCIENCES↗

From nGy to MGy - New dosimetry with LiF:Mg,Cu,P thermoluminescence detectors

One of the well known advantages of thermoluminescence (TL) detectors made of lithium fluoride doped with magnesium, copper and phosphorus (LiF:Mg,Cu,P) is their very high sensitivity to ionizing radiation. LiF:Mg,Cu,P detectors enable measurements of radiation doses from tens of nanograys up to a few kilograys, when the total saturation of the signal of the so-called main dosimetric peak occurs. Only recently, unprecedented high-temperature emission of LiF detectors heated to temperatures up to 600 Degree-Sign C, was observed after exposures to radiation doses ranging from 1 kGy to 1 MGy. For quantification of the glow-curve shape changes of LiF:Mg,Cu,P detectors in this range of doses and determination of the absorbed dose, the Ultra-High Temperature Ratio coefficient (UHTR) was defined. This newly established dosimetric method was tested in a range of radiation qualities, such as gamma radiation, electron and proton beams, thermal neutron fields and high-energy mixed fields around the SPS and PS accelerators at CERN. The new method for ultra-high dose range monitoring with a single LiF:Mg,Cu,P detector, which is capable of covering at least twelve orders of magnitude of doses, can be used for dosimetry at high energy accelerators, thermonuclear fusion technology facilities and has great potential for accident dosimetry in particular. A number of dosimetric sets with LiF:Mg,Cu,P detectors are currently installed around the LHC at CERN.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Long-range forces: atmospheric neutrino oscillation at a magnetized detector

Among the combinations L{sub e}-L{sub μ}, L{sub e}-L{sub τ} and L{sub μ}-L{sub τ} any one can be gauged in anomaly free way with the standard model gauge group. The masses of these gauge bosons can be so light that it can induce long-range forces on the Earth due to the electrons in the Sun. This type of forces can be constrained significantly from neutrino oscillation. As the sign of the potential is opposite for neutrinos and antineutrinos, a magnetized iron calorimeter detector (ICAL) would be able to produce strong constraint on it. We have made conservative studies of these long-range forces with atmospheric neutrinos at ICAL considering only the muons of charge current interactions. We find stringent bounds on the couplings α{sub eμ,eτ} ∼< 1.65 × 10{sup −53} at 3σ CL with an exposure of 1 Mton·yr if there is no such force. For nonzero input values of the couplings we find that the potential V{sub eμ} opposes and V{sub eτ} helps to discriminate the mass hierarchy. However, both potentials help significantly to discriminate the octant of θ{sub 23}. The explanation of the anomaly in recent MINOS data (the difference of Δm{sub 32}{sup 2} for neutrinos and antineutrinos), using long-range force originated from the mixing of the gauge boson Z' of L{sub μ}-L{sub τ} with the standard model gauge boson Z, can be tested at ICAL at more than 5σ CL. We have also discussed how to disentangle this from the solution with CPT violation using the seasonal change of the distance between the Earth and the Sun.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear power spectrum in the presence of massive neutrinos: Perturbation theory approach, galaxy bias, and parameter forecasts

Future or ongoing galaxy redshift surveys can put stringent constraints on neutrinos masses via the high-precision measurements of galaxy power spectrum, when combined with CMB information. In this paper we develop a method to model galaxy power spectrum in the weakly nonlinear regime for a mixed dark matter [cold dark matter (CDM) plus finite-mass neutrinos] model, based on perturbation theory (PT) whose validity is well tested by simulations for a CDM model. In doing this we carefully study various aspects of the nonlinear clustering (nonlinear neutrino perturbations and the higher-order growth functions), and then arrive at a useful approximation allowing for a quick computation of the nonlinear power spectrum as in the CDM case. The nonlinear galaxy bias is also included in a self-consistent manner within the PT framework. Thus, the use of our PT model can give a more robust understanding of the measured galaxy power spectrum as well as allow for higher sensitivity to neutrino masses due to the gain of Fourier modes beyond the linear regime. Based on the Fisher matrix formalism, we find that the BOSS or Stage-III type survey, when combined with Planck CMB information, gives a precision of total neutrino mass constraint, {sigma}(m{sub {nu}}{sub ,tot}){approx_equal}0.1 eV, while the Stage-IV type survey may achieve {sigma}(m{sub {nu}}{sub ,tot}){approx_equal}0.05 eV, i.e., more than a 1-{sigma} detection of neutrino masses. We also discuss possible systematic errors on dark energy parameters caused by the neutrino mass uncertainty. The significant correlation between neutrino mass and dark energy parameters is found, if the information on power spectrum amplitude is included. More importantly, for the Stage-IV type survey, a best-fit dark energy model may be biased and falsely away from the underlying true model by more than the 1-{sigma} statistical errors, if neutrino mass is ignored in the model fitting.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hybrid SO(10) Axion Model without Quality Problem

Invisible axion models that solve the strong C P problem via the Peccei-Quinn (PQ) mechanism typically have a quality problem that arises from quantum gravity effects which violate all global symmetries. These models therefore require extreme fine-tuning of parameters for consistency. We present a new solution to the quality problem in a unified SO ( 10 ) × U ( 1 ) a gauge model, where U ( 1 ) a is an anomaly free axial gauge symmetry. PQ symmetry emerges as an accidental symmetry in this setup, which admits a PQ breaking scale as large as 7 × 10 11 GeV , allowing for the axion to be the cosmological dark matter. We call this a hybrid axion model due to its unique feature that it interpolates between the popular KSVZ and DFSZ axion models. Its predictions for the experimentally measurable axion couplings to the nucleon and electron are distinct from those of the usual models, a feature that can be used to test it. Furthermore, the model has no domain wall problem and it provides a realistic and predictive framework for fermion masses and mixings. Published by the American Physical Society 2025

Babu, K. S. (ORCID:0000000161475155)↗

ACOPF Transmission Switching Using Open-Source MINLP Solvers

The optimal transmission switching (OTS) problem with AC physics represents a mixed integer non-linear non-convex optimization problem which can provide benefits to transmission level power system operations. In this paper we benchmark a set of open-source mixed integer non-linear programming (MINLP) solvers on the OTS problem with AC physics using the pglib set of power system test cases. Results characterizing the performance of the different solvers are reported and discussed.

ACOPF↗

Bi-Level Volt-VAR Optimization to Coordinate Smart Inverters with Voltage Control Devices

Conservation voltage reduction (CVR) uses voltage control to reduce customer power demand and help improve the operational efficiency of the electric power distribution system. With the advent of advanced distribution management systems (ADMS), the underlying data and control-rich platform can be utilized to enable a centralized Volt-VAR optimization (VVO) scheme that includes smart inverter controls along with legacy voltage control devices such as voltage regulators and capacitor banks to ensure a maximum CVR benefit. The objective of this paper to present a VVO approach that controls system’s legacy voltage control devices and coordinates their operation with smart inverter control. An optimal power flow (OPF) formulation is proposed by developing linear and nonlinear power flow approximations for a three-phase unbalanced electric power distribution system. A bi-level VVO approach is proposed where, Level-1 optimizes the control of legacy devices and smart inverters using a linear approximate three-phase power flow. In Level-2, the control parameters for smart inverters are adjusted to obtain an optimal and feasible solution by solving the approximate nonlinear OPF model. Level-1 is modeled as a Mixed Integer Linear Program (MILP) while Level-2 as a Quadratically Constrained Quadratic Program (QCQP). The proposed approach is validated using IEEE test cases and the results demonstrate the applicability of the framework in achieving the CVR objective.

Jha, Rahul Ranjan↗

Plant phylogenetic history explains in-stream decomposition at a global scale

1. Evolutionary history and adaptation to climate shape plant traits. Some include leaf traits that influence litter quality. As a result, evolutionary history should affect litter decomposition, a crucial ecosystem process. In addition, litter decomposition is directly influenced by climate. Similarly, we expect plant phylogeny, adaptation and climate to jointly influence litter decomposition. These effects and their interactions have yet to be untangled at a global scale. 2. Here we introduce an analysis of variation in litter decomposition rates in rivers and streams across 285 published studies for 239 species (from ferns to angiosperms) distributed at 494 locations world-wide. We estimated the relative contributions of climatic conditions and phylogenetic heritage on litter decomposition rates, partitioning phylogenetic from climatic effects at the site and species levels using phylogenetic eigenvector analysis and phylogenetic linear mixed models. In addition, we modelled transitions in decomposition rates under a suite of multiple adaptive-regime Ornstein–Uhlenbeck models to test the hypothesis that natural selection has shaped clade-level litter decomposition rates. 3. Leaf litter decomposition rate exhibited a significant phylogenetic signal. Modelling decomposition rate as a function of location, climatic niche and phylogeny consistently recovered phylogeny alone as one of the top models in species-level analyses. Since many previous studies have focused on the same species across many locations, we also conducted analyses at the species × site level. Both phylogenetic and climatic factors were favoured in models of this analysis, but the single most important predictor for angiosperms and for all taxa analysed together was phylogeny alone. 4. Synthesis. For plant species distributed globally at nearly 500 locations we found that plant phylogenetic history is a critically important predictor of litter decomposition rate in rivers and streams, explaining more of the variance in decomposition than site or climatic regime. Thus, our study demonstrates the influence of evolutionary history on suites of plant traits that shape a key ecosystem process.

54 ENVIRONMENTAL SCIENCES↗

Catalyst-Specific Accelerated Stress Tests in Proton Exchange Membrane Low-Temperature Electrolysis for Intermittent Operation

Device-level stress tests are developed that focus on anode catalyst layer degradation and future anticipated operating conditions, including intermittent load and reduced platinum group metal content. Square-wave cycles with an upper load limit of 2.5 A cm -2 are utilized to screen commercial iridium (Ir) materials. Performance losses are primarily due to decreasing kinetics and are accompanied by catalyst migration into the membrane, worsening catalyst/ionomer integration, and weakening of the catalyst/membrane interface. For ruthenium-containing catalysts, the in situ performances are higher but durabilities lower than Ir baselines, and any performance advantage is lost within the test. Increased loss is likely due to the higher dissolution rate; microscopy confirmed greater degrees of ruthenium migration. For Ir metal or mixed oxides, ex situ activity improvements generally did not translate to in situ performance. The durability, however, is significantly lower and the loss rate increased from 3 (oxide) to 9 (metal) μ V cycle -1 . These results are consistent with historical findings in literature, rationalize the continued use of iridium oxide as a baseline catalyst, and demonstrate that traditional catalyst development approaches may not improve device-level durability when focused on low-cost applications. A shift in focus may therefore be more effective at improving catalyst utilization and lessening load requirements.

08 HYDROGEN↗

Screening of Additional Candidate Low-Temperature Glasses for Technetium Recovered from Hanford Effluent Management Facility Evaporator Bottoms

In this annex to a previously reported study, a series of laboratory screening tests was conducted to identify low-temperature glasses that have significant potential for use in disposition of technetium from a Hanford Tank Waste Treatment & Immobilization Plant (WTP) secondary liquid waste stream. Specifically, a glass waste form is sought that would be suitable for on-site disposition of technetium, salts, and other species in a Tc-rich stream recovered by ion exchange from the future Effluent Management Facility (EMF) evaporator concentrate. In the current study, several additional candidate glasses were identified, and testing of previous candidates was extended to include the Toxicity Characteristic Leaching Procedure (TCLP). In non-radioactive testing with rhenium surrogate, new formulations incorporated a simulated ion exchange eluate at temperatures below 750 °C to produce an amorphous, or mixed crystalline-amorphous, product. Incorporation of technetium (NaTcO 4 )-containing simulated eluate was evaluated for two of these glasses. Technetium was not retained well in these glasses, confounding the previous conclusion that Tc volatilization during vitrification can be reduced by appropriate selection of low-temperature glasses. Preliminary data for additional low-temperature glass compositions and recommendations for future work are provided. This report is a deliverable associated with requisition 55068-004-03 NFE-17-0020 "Candidate Low-T Glass Waste Forms for EMF Bottoms On-Site Disposition Alternative."

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Requirements Description of DASSH-F

This report reviews the modeling and simulation capabilities of Argonne National Laboratory’s DASSH code that is used in present reactor analysis activities. These capabilities will be used to establish the set of verification tasks necessary to verify DASSH for use on commercial projects. A similar approach was taken for the PERSENT, REBUS and DIF3D software packages. The DASSH program is a thermal analysis code designed to rapidly allow a reactor design engineer to obtain flow rates requirements that satisfy peak temperature constraints in the domain. DASSH is a follow-on development to the SE2-ANL software and SUPERENERGY-2 software that it is based upon. DASSH was designed to account for both neutron and gamma heating and is inherently connected to the GAMSOR part of the ARC suite of fast reactor analysis software. SE2-ANL is a developed piece of software from the 1980s while DASSH is a modern implementation with notable improvements in geometry handling. The most important upgrade of DASSH relative to SE2-ANL is that it can analyze multiple time points in a single run where SE2-ANL can only treat a single time point. This allows the user to understand the impact of and search the flow distribution for the entire operational period of a reactor design considering pressure drop, peak coolant and fuel temperatures, and thermal striping. DASSH has three input paths that have to be verified. The first input path builds the geometry and power distribution based upon the DIF3D model but ignores the gamma heating aspects of the problem. The second input path also builds the geometry from the DIF3D model but it takes the neutron and gamma heating distributions from GAMSOR. The third input path is to take the geometry and power distribution directly from user input (i.e. not coupled to DIF3D or GAMSOR). DASSH also has many built in correlations for material properties along with a user defined specification of the fuel, structure, and coolant properties. There are correlations for flow split, mixing, pressure drop, and heat transfer coefficients (subchannel rather than a direct methodology). In total, verification of DASSH will require an extensive testing to cover all possible user features of the software.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DWPF GLASS BEADS AND GLASS FRIT TRANSPORT DEMONSTRATION

DWPF is considering replacing irregularly shaped glass frit with spherical glass beads in the Slurry Mix Evaporator (SME) process to decrease the yield stress of the melter feed (a non-Newtonian Bingham Plastic). Pilot-scale testing was conducted on spherical glass beads and glass frit to determine how well the glass beads would transfer when compared to the glass frit. Process Engineering Development designed and constructed the test apparatus to aid in the understanding and impacts that spherical glass beads may have on the existing DWPF Frit Transfer System. Testing was conducted to determine if the lines would plug with the glass beads and the glass frit slurry and what is required to unplug the lines. The flow loop consisted of vertical and horizontal runs of clear PVC piping, similar in geometry to the existing system. Two different batches of glass slurry were tested: a batch of 50 wt% spherical glass beads and a batch of 50 wt% glass frit in process water. No chemicals such as formic acid was used in slurry, only water and glass formers. The glass beads used for this testing were commercially available borosilicate glass of mesh size -100+200. The glass frit was Frit 418 obtained from DWPF and is nominally -45+200 mesh. The spherical glass beads did not have a negative impact on the frit transfer system. The transferring of the spherical glass beads was much easier than the glass frit. It was difficult to create a plug with glass bead slurry in the pilot transfer system. When a small plug occurred from setting overnight with the spherical glass beads, the plug was easy to displace using only the pump. In the case of creating a man made plug in a vertical line, by filling the line with spherical glass beads and allowing the slurry to settle for days, the plug was easy to remove by using flush water. The glass frit proved to be much more difficult to transfer when compared to the spherical glass beads. The glass frit impacted the transfer system to the point that the test apparatus had to be disassembled to dislodge the plugs created in the system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Low-Temperature Combustion of High Octane Fuels in a Gasoline Compression Ignition Engine

Gasoline Compression Ignition (GCI) has been shown as one of the advanced combustion concepts that could potentially provide a pathway to achieve cleaner and more efficient combustion engines. Fuel and air in GCI are not fully premixed as compared to homogeneous charge compression ignition (HCCI) which is a completely kinetic-controlled combustion system. Therefore, the combustion phasing can be controlled by the time of injection, usually post injection in a multiple-injection scheme, to mitigate combustion noise. Gasoline fuels ignite more difficult than Diesel. The autoignition quality of gasoline can be indicated by research octane number (RON). Fuels with high octane tend to have more resistance to auto-ignition, hence more time for fuel-air mixing. In this study, three fuels, namely, Aromatic, Alkylate, and E30, with similar RON value of 98 but different hydrocarbon compositions were tested in a multi-cylinder engine under GCI combustion mode. Considerations of EGR, start of injection (SOI), and boost were investigated to study the sensitivity of dilution, local stratification, and reactivity of the charge, respectively, for each fuel. Combustion phasing was kept constant during the experiments to the changes in ignition and combustion process before and after 50% of the fuel mass is burned. Emission characteristics at different levels of EGR and lambda were revealed for all fuels with E30 having the lowest filter smoke number (FSN) and was also most sensitive to the change in dilution. Reasonably low combustion noise (< 90 dB) and stable combustion (COVIMEP < 3%) were maintained during the experiments. The second part of this paper contains visualization of the combustion process obtained from endoscope imaging for each fuel at selected conditions. Soot radiation signal from GCI combustion were strong during late injection, and also more intense at low EGR conditions. Furthermore, soot/temperature profiles indicated only the high-temperature combustion period, while cylinder pressure-based heat release rate (HRR) showed a two-stage combustion phenomenon.

33 ADVANCED PROPULSION SYSTEMS↗

Some Fundamental Experiments on Apparent Dissolution Rate of Gas Phase in the Groundwater Recovery Processes of the Geological Disposal System - 12146

The apparent dissolution rates of gas phase in the co-presence of solid phase were examined by in-room experiments in this study. The apparent dissolution rate of gas phase q (mol/m{sup 3}.s) was generally defined by q=aK{sub L}(γP{sub g}-c), where a (1/m) is specific surface area of the interface between gas and liquid phases, K{sub L} (m/s) is overall mass transfer coefficient, γ (mol/(Pa.m{sup 3})) is reciprocal number of Henry constant, P{sub g} (Pa) is partial pressure of gas phase, and c (mol/m{sup 3}) is the concentration of gas component in liquid phase. As a model gas, CO{sub 2} gas was used. For evaluating the values of K{sub L}, this study monitored pH or the migration rate of the interface between water/gas phases, using some experiments such as the packed beds and the micro channel consisting of granite chip and rubber sheet including a slit. In the results, the values of K{sub L} were distributed in the range from 5.0x10{sup -6} m/s to 5.0x10{sup -7} m/s. These values were small, in comparison with that (7.8x10{sup -4} m/s) obtained from the bubbling test where gas phase was continually injected into deionized water without solid phase. This means that the solid phase limits the local mixing of water phase near gas-liquid interfaces. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Design and Validation Testing of TruckScan to Assay Large Sacks of Fukushima Radioactive Debris on a Truck

As a result of the March 2011 earthquake and resulting tsunami in Japan, there was a serious accident at the Fukushima Dai-ichi Nuclear Power Plant. This accident has contaminated soil and vegetation in a wide area around the plant. Decontamination projects over the last 4 years have resulted in large numbers of 1 cubic meter canvas bags of debris, commonly called Super Sacks [SS]. These are currently stored nearby where they were generated, but starting in 2015, they will be moved to various Interim Storage Facilities [ISF]. Trucks will typically carry 8-20 of these SSs. When the trucks arrive at the ISF they need to be rapidly sorted into groups according to radioactivity level, for efficient subsequent processing. Canberra Industries, Inc. [CI] has designed a new truck monitoring system 'TruckScan' for use at these ISFs. The TruckScan system must measure the entire truck loaded with multiple closely packed SSs, and generate a nuclide specific assay report showing the radioactivity in each individual SS. The Canberra-Japan office, along with Obayashi Corporation have performed validation testing to demonstrate to the regulatory authorities that the proposed technique was sufficiently accurate. These validation tests were conducted at a temporary storage area in Fukushima prefecture. Decontaminated waste of various representative types and of various levels of radioactivity was gathered and mixed to create homogeneous volumes. These volumes were sampled multiple times and assayed with laboratory HPGe detectors to determine the reference concentration of each pile. Multiple SSs were loaded from each pile. Some of the SSs were filled 50% full, others 75% full, and others 100% full, to represent the typical loading configuration of the existing SSs in the field. The content of the SSs are either sand, soil, or vegetation with densities ranging from 0.3 g/cc - 1.6 g/cc. These SSs with known concentrations of Cs-134 and Cs-137 were then loaded onto trucks in a variety of configurations, typical of how they might be on the real trucks. A partial system was installed at the site and used to assay these trucks with the various loading configurations. Whereas the full system will have 8 collimated 3 x 3'' NaI detectors, the test system only had two detectors; therefore the truck was moved and counted 4 times. The data were acquired and analyzed with the Canberra Genie software to determine the peak counts for both Cesium nuclides. That data was then analyzed with a prototype version of a Maximum Entropy algorithm, to determine the individual SS activity. The goal of the validation tests was to demonstrate that the system could detect 1000 Bq/kg in 15 seconds, and to determine how accurately it could quantify individual SSs. The validation tests demonstrated that the product would perform as predicted. The TruckScan results were consistent with the sample assay results [y = 1.0029 x, R{sup 2} = 0.914]. The Total Propagated Uncertainty, including both uncertainties from these tests and others that were estimated but not tested was 16.6% percent. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of prill structure on detonation performance of ANFO

While the effects of charge diameter, fuel mix ratio, and temperature on ANFO detonation performance are substantial, the effects of prill type are considerable as well as tailorable. Engineered AN prills provide a means to improve overall performance, primarily by changing the material microstructure through the addition of features designed to enhance hot spot action. To examine the effects of prill type (along with fuel mix ratio and charge diameter) on detonation performance, a series of precision, large-scale, ANFO front-curvature rate-stick tests was performed. Each shot used standard No. 2 diesel for the fuel oil and was essentially unconfined with cardboard confinement. Detonation velocities and front curvatures were measured while actively maintaining consistent shot temperatures. Based on the experimental results, DSD calibrations were performed to model the detonation performance over a range of conditions, and the overall effects of prill microstructure were examined and correlated with detonation performance.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Sequestration of CO{sub 2} in Mixtures of Caustic Byproduct and Saline Waste Water

A series of tests were conducted to investigate a novel reaction concept designed to achieve neutralization of mixtures of acidic oil field produced brine and caustic industrial byproducts while sequestering substantial quantities of anthropogenic carbon dioxide (CO{sub 2}) in a mixed-flow reactor. Experiments were conducted to determine the CO{sub 2}-bearing capacity of reactive mixtures of brine from the Oriskany Sandstone Formation with three caustic industrial byproducts: flue gas desulfurization (FGD) spray dryer ash, Class C fly ash subbituminous coal combustion byproduct, and bauxite residue slurry from the alumina production process. Reactions were conducted in a closed, well-mixed (1,500 rpm) reactor with gas composed of 29.46% vol./vol. CO{sub 2} balanced by nitrogen gas fed at a rate of 300 mL/min. Reactions were carried out at ambient conditions. Results show linear relationships between caustic byproduct addition and CO{sub 2}-bearing capacity, with relatively small impact of brine addition as compared to deionized water addition. FGD spray dryer ash/brine mixtures exhibited higher CO{sub 2} reactivity than those using Class C fly ash (0.759 moles CO{sub 2}, at 23.6% solids by weight and 0.036 moles CO{sub 2} at 23.3% solids by weight, respectively). Bauxite residue exhibited moderate capacities in mixtures with higher percent solids (0.335 moles CO{sub 2} in 40% solids bauxite residue slurry). Carbonation capacity of caustic byproduct/acidic brine mixtures was shown to increase linearly with respect to percent caustic byproduct addition, but enhanced mineral carbonate precipitation resulting from synergistic reaction of brine cations with increased dissolved carbonate species was not observed in the short term.

01 COAL, LIGNITE, AND PEAT↗