Search NASA⌕ Search

SEARCH · Search NASA

Results for “Randomization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Percolation and excitonic luminescence in SiO{sub 2}/ZnO two-phase structures with a high density of quantum dots randomly distributed over a spherical surface

The results of studies of structures formed of silica (SiO{sub 2}) nanospheres and ZnO quantum dots randomly distributed over the nanosphere surface to cover an {approx}0.45 fraction of the surface area are given. Because of the large surface energy of the spheres, the quantum dots formed on their surface are shaped as disks, wherein charge carriers are influenced by the quantum-confinement effect despite the large disk radii. The disk height is calculated by the effective mass method. The height is found to be comparable with the diameter of excitons in bulk ZnO. Analysis of the optical spectra shows that, at the above-indicated surface area covered with quantum dots, excitons in the array of quantum dots are above the percolation level. The use of some concepts of the percolation theory and knowledge of the topological arrangement of the samples make it possible to obtain quantitative parameters that describe this phenomenon.

36 MATERIALS SCIENCE↗

A study of the effect of random dopant-concentration fluctuations on current in semiconductor superlattices

The influence exerted by random dopant-concentration fluctuations on the current–voltage characteristics of the current flowing through a semiconductor superlattice has been studied. It was shown that the characteristics of the current flowing through the superlattice noticeably vary with the amplitude of fluctuations of nanostructure parameters. It was possible to find for a small sample the probability-density distribution of the integrated absolute values of the difference of currents at various amplitudes of the dopantconcentration fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the Zero Relaxation Limit of Hyperbolic Balance Laws with Random Initial Data

We show the convergence of the zero relaxation limit of $2 \times 2$ systems of hyperbolic balance laws with stochastic initial data. Precisely, solutions converge to a solution of the local equilibrium approximation as the relaxation time tends to zero. The initial data are assumed to depend on finitely many random variables, and the convergence is then proved via the appropriate analogues of the compensated compactness methods used in treating the deterministic case. We also demonstrate the validity of this limit in the case of the semilinear $p$-system; the well-posedness of both the system and its equilibrium approximation is proved, and the convergence is shown with no a priori conditions on solutions. Here, this model serves as a prototype for understanding how asymptotic approximations can be used as control variates for hyperbolic balance laws with uncertainty.

$p$-system↗

Bias-Variance Trade-Off in Physics-Informed Neural Networks with Randomized Smoothing for High-Dimensional PDEs

Physics-Informed Neural Networks (PINNs) have triggered a paradigm shift in scientific computing, leveraging mesh-free properties and robust approximation capabilities. While proving effective for low-dimensional partial differential equations (PDEs), the computational cost of PINNs remains a hurdle in high-dimensional scenarios. This is particularly pronounced when computing high-order and high-dimensional derivatives in the physics-informed loss. Randomized Smoothing PINN (RS-PINN) introduces Gaussian noise for stochastic smoothing of the original neural net model, enabling the use of Monte Carlo methods for derivative approximation, which eliminates the need for costly automatic differentiation. Despite its computational efficiency, especially in the approximation of high-dimensional derivatives, RS-PINN introduces biases in both loss and gradients, negatively impacting convergence, especially when coupled with stochastic gradient descent (SGD) algorithms. We present a comprehensive analysis of biases in RS-PINN, attributing them to the nonlinearity of the Mean Squared Error (MSE) loss as well as the intrinsic nonlinearity of the PDE itself. We propose tailored bias correction techniques, delineating their application based on the order of PDE nonlinearity. The derivation of an unbiased RS-PINN allows for a detailed examination of its advantages and disadvantages compared to the biased version. Specifically, the biased version has a lower variance and runs faster than the unbiased version, but it is less accurate due to the bias. To optimize the bias-variance trade-off, we combine the two approaches in a hybrid method that balances the rapid convergence of the biased version with the high accuracy of the unbiased version. In addition to methodological contributions, we present an enhanced implementation of RS-PINN. Extensive experiments on diverse high-dimensional PDEs, including Fokker-Planck, Hamilton-Jacobi-Bellman (HJB), viscous Burgers’, Allen-Cahn, and Sine-Gordon equations, illustrate the bias-variance trade-off and highlight the effectiveness of the hybrid RS-PINN. Empirical guidelines are provided for selecting biased, unbiased, or hybrid versions, depending on the dimensionality and nonlinearity of the specific PDE problem.

97 MATHEMATICS AND COMPUTING↗

Perspective on “Active Brownian particles moving in a random Lorentz gas”

Self-propelled active matter can exhibit vastly different behavior than systems with purely Brownian motion. In Eur. Phys. J. E 40, 23 (2017), Zeitz, Wolf, and Stark compared an active matter particle with a Brownian particle moving in a random obstacle array. They showed that near the obstacle percolation density, both Brownian and active particles exhibit the same subdiffusive behavior, but the active particle reaches a steady state more rapidly. They also found that for high activity, the active particle has a lower effective diffusion than the Brownian particle due to the increased self-trapping effect generated by the activity. This result opens new directions for the study of active matter in disordered media, including bacteria in porous media, active colloids on quenched disorder, and active particles in crowded environments.

36 MATERIALS SCIENCE↗

Random Quantum Circuits

Quantum circuits—built from local unitary gates and local measurements—are a new playground for quantum many-body physics and a tractable setting to explore universal collective phenomena far from equilibrium. These models have shed light on longstanding questions about thermalization and chaos, and on the underlying universal dynamics of quantum information and entanglement. In addition, such models generate new sets of questions and give rise to phenomena with no traditional analog, such as dynamical phase transitions in quantum systems that are monitored by an external observer. Quantum circuit dynamics is also topical in view of experimental progress in building digital quantum simulators that allow control of precisely these ingredients. Randomness in the circuit elements allows a high level of theoretical control, with a key theme being mappings between real-time quantum dynamics and effective classical lattice models or dynamical processes. Many of the universal phenomena that can be identified in this tractable setting apply to much wider classes of more structured many-body dynamics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials and Physics Challenges for Spin Transfer Torque Magnetic Random Access Memories

Magnetic random access memories utilizing the spin transfer torque effect for writing information are a strong contender for non-volatile memories scalable to the 20 nm node, and perhaps beyond. I will here examine how these devices behave as the device size is scaled down from 70 nm size to 20 nm. As device sizes go below ~50 nm, the size becomes comparable to intrinsic magnetic length scales and the device behavior does not simply scale with size. This has implications for the device design and puts additional constraints on the materials in the device.

Heinonen, O.↗

Modeling Coupled Chemo-Mechanical Behavior of Randomly Oriented NMC811 Polycrystalline Li-Ion Battery Cathodes

This paper develops a three-dimensional, transient, chemo-mechanical model that predicts the performance of single secondary particle Li-ion battery cathodes. The secondary particles are composed of numerous (approximately 60) randomly oriented single-crystal primary particles. The model incorporates concentration-dependent and anisotropic material properties. As much as possible, electrochemical, transport, and structural properties for crystalline NMC811 (Li x Ni 0.8 Mn 0.1 Co 0.1 O 2 ) are taken from prior publications. Weak Van der Waals bonding between primary particles is modeled empirically using a spring analogy, which enables local primary-particle separations (disintegration) and subsequent reattachments. The model fully couples Li diffusion and the mechanical response. Results include predictions of local Li-concentrations and stresses. High stresses are found near grain boundaries, especially when the lattice orientations are greatly misaligned. Particle separations are characterized in terms of a damage parameter. The model is used to predict the effects of design and operating conditions, including charge/discharge rates, cycling scenarios, and particle sizes.

25 ENERGY STORAGE↗

Impedance Response Influenced by Variability in the Random Distribution of Physical Properties of Coated Materials in Two-Dimensional Space

Heterogeneous physical characteristics of a system featuring a single-layer film on a metallic surface have been explored via its impedance response. The Nyquist plot showed a distorted semicircle, indicative of the system's unique distribution characteristics. Utilizing a copula-based probability method, a two-dimensional deterministic impedance model was successfully integrated, accounting for spatial physical properties such as permittivity and electrical conductivity. This strategy enabled in-depth exploration and mechanistic quantification of a broad spectrum of properties. A quantitative understanding of impedance signal alterations, characterized by normally or log-normally correlated variables, was achieved through the variation in aspect ratio and characteristic frequency of the impedance spectra. Log-normally distributed electrical properties provided a superior representation of the distorted impedance spectra. As coefficient of variation (CV) values fluctuated, the aspect ratio and characteristic frequency showed heightened sensitivity to log-normal permittivity compared to log-normal electrical conductivity. Notably, a marked positive linear correlation between electrical properties resulted in an impedance response that approximated perfect semicircular spectra. The variability in the electrical properties' distribution was demonstrated by considering the correlation coefficient between electrical conductivity and the z-direction position. Furthermore, the highest aspect ratio of the impedance spectra was observed when the electrical conductivity was randomly distributed across the z-direction space.

36 MATERIALS SCIENCE↗

Random Walk Analysis of the Effect of Mechanical Degradation on All-Solid-State Battery Power

Mechanical and electrochemical phenomena are coupled in defining the battery reliability, particularly for solid-state batteries. Micro-cracks act as barriers to Li-ion diffusion in the electrolyte, increasing the average electrode’s tortuosity. In our previous work, we showed that solid electrolytes are likely to suffer from mechanical degradation if their fracture energy is lower than 4 J m -2 [G. Bucci, T. Swamy, Y.-M. Chiang, and W. C. Carter, J. Mater. Chem. A (2017)]. Here we study the effect of electrolyte micro-cracking on the effective conductivity of composite electrodes. Via random analyzes, we predict the average diffusivity of lithium in a solid-state electrode to decrease linearly with the extension of mechanical degradation. Furthermore, the statistical distribution of first passage times indicates that the microstructure becomes more and more heterogeneous as damage progresses. In addition to power and capacity loss, a non-uniform increase of the electrode tortuosity can lead to heterogeneous lithiation and further stress localization. Finally, the understanding of these phenomena at the mesoscale is essential to the implementation of safe high-energy solid-state batteries.

25 ENERGY STORAGE↗

Dynamic Response of a Semiactive Suspension System with Hysteretic Nonlinear Energy Sink Based on Random Excitation by means of Computer Simulation

This paper aims to investigate the property and behavior of the hysteretic nonlinear energy sink (HNES) coupled to a half vehicle system which is a nine-degree-of-freedom, nonlinear, and semiactive suspension system in order to improve the ride comfort and increase the stability in shock mitigation by using the computer simulation method. The HNES model is a semiactive suspension device, which comprises the famous Bouc–Wen (B-W) model employed to describe the force produced by both the purely hysteretic spring and linear elastic spring of potentially negative stiffness connected in parallel, for the half vehicle system. Nine nonlinear motion equations of the half vehicle system are derived in terms of the seven displacements and the two dimensionless hysteretic variables, which are integrated numerically by employing the direct time integration method for studying both the variables of vertical displacements, velocities, accelerations, chassis pitch angle, and the ride comfort and driver safety, respectively, based on the bump and random road inputs of the pseudoexcitation method as excitation signal. Simulation results show that, compared with the HNES model and the magnetorheological (MR) model coupled to the half vehicle system, the ride comfort and stability have been evidently improved. A successful validation process has been performed, which indicated that both the ride comfort and driver safety properties of the HNES model coupled to half vehicle significantly improved.

Chen, Hui↗

Quantitative Evaluation of Top Coal Caving Methods at the Working Face of Extra‐Thick Coal Seams Based on the Random Medium Theory

Adopting an effective top coal caving method is the key to enhancing coal recovery and reducing gangue content for the fully mechanized top coal caving working face with extra‐thick coal seams. In this study, the movement of coal particles generated during top coal caving is considered to follow a normal distribution. Then, the caving body and coal‐rock settlement along the working face during the caving process are studied based on both the random media theory and probability theory. Accordingly, the optimal caving interval and caving sequences are determined, and a novel interval symmetrical coal caving method is proposed. The proposed method is systematically verified with results from physical similarity tests, and different caving methods are assessed by field tests. The results show the following: (1) The coal‐rock settlement and the caving body demonstrate clear axial symmetrical features along the working face; the size of the caving body increases as the caving height grows and its shape turns progressively from semicircular to semielliptical with a lower foot of the coal‐rock settlement. (2) The caving interval is derived using the sum of the radii of the coal‐rock settlement curves formed by the two largest caving bodies. (3) The symmetrical caving approach provides a symmetrical space for the subsequent movement of the broken top coal, which enables a uniform development of the caving body. (4) Compared with the traditional sequential coal caving method with the same number of supports, the interval symmetrical caving method results in a 21.7% of coal production increase, 17% caving rate promotion, and a shortened caving time by 23.4%. (5) The interval symmetrical caving method is found to improve the controllability of the caving process at the fully mechanized top coal caving working face. In general, this work presents a theoretical approach to select the optimal caving methods for the fully mechanized caving working face in extra‐thick coal seams for an improved production efficiency of the work face. The results of this study can also provide theoretical significance and referencing value for quantitative analyses of the coal caving methods for work faces with similar geological conditions.

Jiulin, Shi (ORCID:0000000155819062)↗

Cryptotomography: reconstructing 3D Fourier intensities from randomly oriented single-shot diffraction patterns (CXIDB ID 9)

These 2000 single-shot diffraction patterns include were either background-scattering only or hits (background-scattering plus diffraction signal from sub-micron ellipsoidal particles at random, undetermined orientations). Candidate hits were identified by eye, and the remainder were presumed as background. 54 usable, background-subtracted hits in this set (procedure in referenced article) were used to reconstruct the 3D diffraction intensities of the average ellipsoidal particle.

BL2↗

Bayati Kim Saberi random graph sampler

This software package implements the algorithm from a paper by Bayati, Kim, and Saberi (first reference below) to generate a uniformly random sample of a graph with a prescribed degree distribution.

Gleich, DavidF.↗

Livermore Random I/O Testbench

LRIOT is a test bench framework that is designed to generate sophisticated I/O rates that can stress high-performance memory and storage systems, such as non-volatile random access memories (NVRAM)and storage class memory. Furthermore, LRIOT provides the capabilities to mix multiple types of concurrency, namely threading and task parallelism, as well as distributed execution using Message Passing Interface (MPI) libraries. It will be used by algorithm designers to generate access patterns that mimic their application's behavior, and by system designers to test high-performance NVRAM storage.

Source record↗

Parallel Markov Random Fields for Image Segmentation (PMRF-IS) v1.0

This software performs multi-label segmentation of 2D/3D images. It is highly accurate, results rely on use of an Markov random field (MRF) formulation. It runs in both shared and distributed memory parallel modes. MRF algorithms are powerful tools in image analysis to explore contextual information of data.

Heinemann, Colleen↗

Livermore Random I/O Testbench

LRIOT is a test bench framework that is designed to generate sophisticated I/O rates that can stress high-performance memory and storage systems, such as non-volatile random access memories (NVRAM)and storage class memory. Furthermore, LRIOT provides the capabilities to mix multiple types of concurrency, namely threading and task parallelism, as well as distributed execution using Message Passing Interface (MPI) libraries. It will be used by algorithm designers to generate access patterns that mimic their application's behavior, and by system designers to test high-performance NVRAM storage.

Van Essen, Brian↗

Bayesian calibration of stochastic agent based model via random forest

SAND2024-11403O The Bayesian Calibration of Stochastic Agent-based Model via Random Forest is a code that was developed in concurrence with an article by the same name that was written for a journal. The code reproduces simulation results and plots from the article. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗