Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensor Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Remotely Sensed Precipitation from the January 2000 East Coast Blizzard

Initial precipitation forecasts of the January 2000 blizzard were unable to adequately alert emergency response along the eastern seaboard. Cyclogenesis, over the Gulf of Mexico was a contributing cause of that problem. We present distributions of precipitation derived from spaceborne microwave measurements from the Special Sensor Microwave/ Imager (SSM/I) and the TRMM Microwave Imager (TMI) supplemented by NWS operational radar and the National lightning Detection Network (NLDN) Long-Range (LR) product. The combined NWS radar and NLDN-LR data revealed the location of precipitation between 1/23 and 1/27/2000 over the US, the Gulf and the Atlantic Ocean. The remotely sensed precipitation distributions are compared to the precipitation inferred from coincident TMI observations.

Chang, D.-E.↗
NASA NTRS2009

NASA Tech Briefs, August 2009

Topics covered include: Aligning a Receiving Antenna Array to Reduce Interference; Collecting Ground Samples for Balloon-Borne Instruments; Tethered Pyrotechnic Apparatus for Acquiring a Ground Sample; Enhanced Video-Oculography System; Joint Carrier-Phase Synchronization and LDPC Decoding; Dual-Polarization, Sideband-Separating, Balanced Receiver for 1.5 THz Modular Battery Charge Controller; Efficient Multiplexer FPGA Block Structures Based on G4FETs; VLSI Microsystem for Rapid Bioinformatic Pattern Recognition; Low-Noise Amplifier for 100 to 180 GHz; Improved Fabrication of Ceramic Matrix Composite/Foam Core Integrated Structures; Inert Welding/Brazing Gas Filters and Dryers; Fabricating Copper Nanotubes by Electrodeposition; Reducing Aerodynamic Drag on Empty Open Cargo Vehicles; Rotary Percussive Auto-Gopher for Deep Drilling and Sampling; More About Reconfigurable Exploratory Robotic Vehicles; Thermostatic Valves Containing Silicone-Oil Actuators; Improving Heat Flux Performance of Flat Surface in Spray-Cooling Systems; Treating Fibrous Insulation to Reduce Thermal Conductivity; Silica-Aerogel Composites Opacified with La(sub0.7)Sr(sub0.3)MnO3; Cyclic Oxidation Behavior of CuCrAl Cold-Sprayed Coatings for Reusable Launch Vehicles; Ceramic Fiber Structures for Cryogenic Load-Bearing Applications; Elastomer Reinforced with Carbon Nanotubes; Biologically Inspired Purification and Dispersion of SWCNTs; A Technique for Adjusting Eigenfrequencies of WGM Resonators; Low-Pressure, Field-Ionizing Mass Spectrometer; Modifying Operating Cycles to Increase Stability in a LITS; Chamber for Simulating Martian and Terrestrial Environments; Algorithm for Detecting a Bright Spot in an Image; Extreme Programming: Maestro Style; Adaptive Behavior for Mobile Robots; Protocol for Communication Networking for Formation Flying; Planning Complex Sequences Using Compressed Representations; and Self-Supervised Learning of Terrain Traversability from Proprioceptive Sensors.

Source record↗
NASA NTRS2007

NASA Tech Briefs, September 2007

Topics covered include; Rapid Fabrication of Carbide Matrix/Carbon Fiber Composites; Coating Thermoelectric Devices To Suppress Sublimation; Ultrahigh-Temperature Ceramics; Improved C/SiC Ceramic Composites Made Using PIP; Coating Carbon Fibers With Platinum; Two-Band, Low-Loss Microwave Window; MCM Polarimetric Radiometers for Planar Arrays; Aperture-Coupled Thin-Membrane L-Band Antenna; WGM-Based Photonic Local Oscillators and Modulators; Focal-Plane Arrays of Quantum-Dot Infrared Photodetectors; Laser Range and Bearing Finder With No Moving Parts; Microrectenna: A Terahertz Antenna and Rectifier on a Chip; Miniature L-Band Radar Transceiver; Robotic Vision-Based Localization in an Urban Environment; Programs for Testing an SSME-Monitoring System; Cathodoluminescent Source of Intense White Light; Displaying and Analyzing Antenna Radiation Patterns; Payload Operations Support Team Tools; Space-Shuttle Emulator Software; Soft Real-Time PID Control on a VME Computer; Analyzing Radio-Frequency Coverage for the ISS; Nanorod-Based Fast-Response Pressure-Sensitive Paints; Capacitors Would Help Protect Against Hypervelocity Impacts; Diaphragm Pump With Resonant Piezoelectric Drive; Improved Quick-Release Pin Mechanism; Designing Rolling-Element Bearings; Reverse-Tangent Injection in a Centrifugal Compressor; Inertial Measurements for Aero-assisted Navigation (IMAN); Analysis of Complex Valve and Feed Systems; Improved Path Planning Onboard the Mars Exploration Rovers; Robust, Flexible Motion Control for the Mars Explorer Rovers; Solar Sail Spaceflight Simulation; Fluorine-Based DRIE of Fused Silica; Mechanical Alloying for Making Thermoelectric Compounds; Process for High-Rate Fabrication of Alumina Nanotemplates; Electroform/Plasma-Spray Laminates for X-Ray Optics; An Automated Flying-Insect Detection System; Calligraphic Poling of Ferroelectric Material; Blackbody Cavity for Calibrations at 200 to 273 K; KML Super Overlay to WMS Translator; High-Performance Tiled WMS and KML Web Server; Modeling of Radiative Transfer in Protostellar Disks; Composite Pulse Tube; Photometric Calibration of Consumer Video Cameras; Criterion for Identifying Vortices in High- Pressure Flows; Amplified Thermionic Cooling Using Arrays of Nanowires; Delamination-Indicating Thermal Barrier Coatings; Preventing Raman Lasing in High-Q WGM Resonators; Procedures for Tuning a Multiresonator Photonic Filter; Robust Mapping of Incoherent Fiber-Optic Bundles; Extended-Range Ultrarefractive 1D Photonic Crystal Prisms; Rapid Analysis of Mass Distribution of Radiation Shielding; Modeling Magnetic Properties in EZTB; Deep Space Network Antenna Logic Controller; Modeling Carbon and Hydrocarbon Molecular Structures in EZTB; BigView Image Viewing on Tiled Displays; and Imaging Sensor Flight and Test Equipment Software.

Source record↗
NASA NTRSDate not supplied

Leveraging the Multiplatform Precipitation Feature Database of Combined Ground Radar and Satellite Lightning Observations for Convective Studies

The Multiplatform Precipitation Feature (MPF) database combines coincident observations of lightning from space with satellite- and ground-based radar data in a storm-based, feature-defined framework. The concept for the MPF database stems from the motivation to extend the scale and scope of investigations into the complex connections between ice precipitation, updrafts, and lightning in thunderstorms. The earliest iteration of the MPF database incorporates NASA International Space Station Lightning Imaging Sensor (ISS LIS) observations alongside the NASA Global Precipitation Measurement (GPM) Mission Dual-frequency Precipitation Radar (DPR) and Validation Network (VN). Because of the specific role of the GPM VN in forming the first MPFs, this subset is referred to as the VNMPF database. The synthesis of these multi-scale and multi-resolution observations leveraged each platform’s unique insights into convective properties and processes, offering a more complete view of deep convection over the large viewing area afforded by satellite coverage. The VNMPF database established the feasibility and infrastructure to combine microphysical, kinematic, and lightning observations from multiple satellite- and ground-based platforms. Following this successful proof-of-concept, recent progress has expanded the MPF database to make use of coincident ISS LIS lightning observations and data from the operational Weather Surveillance Radar - 1988 Doppler (WSR-88D) network, where individual WSR-88D proximity facilitates vertical wind retrievals via dual-Doppler analysis. These database changes have expanded the scope of the dataset by removing the requirement for coincident GPM and ISS LIS overpasses. This increases the sample size dramatically and facilitates analysis of higher-resolution radar-derived properties. These advancements allow both storm-scale and unprecedented broad statistical analyses of deep convection from electrical, kinematic, and microphysical perspectives over the contiguous United States. This presentation outlines the construction of the new MPF database and introduces some preliminary analyses of the convection captured within it. Early results summarize relationships based on updraft characteristics ascertained from WSR-88D dual-Doppler three-dimensional wind retrievals, properties of ice microphysics gleaned from dual-polarization analyses, and electrical characteristics observed by the ISS LIS. The expanded scale and scope offered by more than five years of ISS LIS observations enable new insights into regional and seasonal variations in the microphysical, kinematic, and electrical relationships of convection. Analysis of the database highlights the potential for advancements in lightning meteorology made possible by combining large-scale spaceborne lightning detection and proven storm interrogation tools such as operational polarimetric Doppler radar.

Lightning↗
NASA NTRSDate not supplied

NASA’s WB-57F High Altitude Research Aircraft is Looking Up: A Flexible and Capable Heliophysics Platform for Coronal Observations During Total Solar Eclipses

NASA's WB-57F "Canberra" high altitude research aircraft is a unique airborne platform that serves a critical need in airborne science. Although the aircraft has been conventionally used for earth observation/remote sensing and in situ atmospheric sampling, research teams have begun to recognize the aircraft’s emerging role in heliophysics research. With the ability to operate at altitudes in excess of 60,000 feet and with a range of over 2,500 miles, the particular capabilities of the WB-57 are unparalleled by other aircraft in the government or commercial spaces. The Canberra has capacity to carry nearly 9,000 pounds of instrumentation across the aircraft, including modular payload areas in the belly, the nose, wing pods, and wing hatches. The WB-57 features a dedicated "person in the loop" sensor equipment operator, real-time high bandwidth data link between air and ground, and an on-board data network allowing interoperability between multiple systems and operator interfaces. The aircraft has a truly global reach, and has operated out of airfields all over the world with a minimal personnel footprint. The Program maintains a highly qualified engineering team that will work closely with customer requirements to optimize efficiency of payload installation and operation on the aircraft. NASA maintains its own airworthiness authority, allowing a bespoke "in house" approach to aircraft modifications and instrument integration. This often saves months of coordination and cost when compared with commercial options. On 8 April 2024, the WB-57 program executed a one-of-a-kind observation the corona over North America and provided a first-flight opportunity for several instruments that were historically strictly terrestrial. By integrating imagers, spectrometers, and ionosondes on the aircraft, research team partnerships with Southwest Research Institute, University of Hawai’i Institute for Astronomy, and Virginia Tech have demonstrated new and exciting applications for this venerable platform, were able to effectively eliminate the risk of adverse weather spoiling the data collection during totality, and reduce the amount of atmospheric interference in the collected spectral data.

Airborne Science↗
NASA NTRS1991

Characterization of and sensor-model verification and control of the properties of PMR-13 during processing

This study presents an in situ sensor and a process-simulation model developed for monitoring and controlling the cure process of PMR-15. The time-temperature dependence of the buildup in the molecular network structure, extent of reaction, viscosity, flow, and consolidation during the cure of PMR-15 are discussed. The relationship of the time-temperature cycle used during imidization to the length of the endcapped chains formed is examined. The relationship of the time-temperature cure-processing cycle to the reaction kinetics, viscosity, flow, and consolidation during crosslinking is analyzed using frequency-dependent electromagnetic sensors and the Loos processing model. Application of the FDEMS sensing technique and the process-simulation model for quality assurance processing and automated on-line control of cure is discussed.

Kranbuehl, D.↗
NASA NTRS2022

3D-CHESS: Decentralized, Distributed, Dynamic, and Context-aware Heterogeneous Sensor Systems

This paper describes the objectives and current status of the 3D-CHESS project which aims to demonstrate a new Earth observing strategy based on a context-aware Earth observing sensor web. This sensor web consists of a set of nodes with a knowledge base, heterogeneous sensors, edge computing, and autonomous decision-making capabilities. Context awareness is defined as the ability for the nodes to gather, exchange, and leverage contextual information (e.g., state of the Earth system, state and capabilities of itself and of other nodes in the network, and how those states relate to the dy- namic mission objectives) to improve decision making and planning. The current goal of the project is to demonstrate proof of concept by comparing the performance of a 3D- CHESS sensor web with that of status quo architectures in the context of a multi-sensor inland hydrologic and ecologic monitoring system.

David, Cedric H.↗
DOE OSTI2019

Domain Adaptation for Convolutional Neural Networks Based Remote Sensing Scene Classification

Remote sensing (RS) scene classification plays an important role in the field of earth observation. With the rapid development of the remote sensing techniques, a large number of RS scene images are available. Since manually labeling largescale RS scene images is both labor and time consuming, when a new unlabeled dataset is obtained, how to use the existing labeled datasets to classify the new unlabeled images is an important research direction. Different RS scene image datasets may be taken from different type of sensors, and the images may vary from imaging modalities, spatial resolutions and image scales, so the distribution discrepancy exists among different image datasets. As a result, simply applying Convolutional Neural Networks (CNN) trained on source domain cannot accurately classify the images on target domain. Domain Adaptation (DA) can be helpful to solve this problem. In this paper, we design a Subspace Alignment (SA) and CNN based framework to solve the DA problem in RS scene image classification. A new SA layer is proposed and added into CNN models for DA, which could align the source and target domains in some feature subspace. Finetuning the modified CNN model with the added SA layer is able to make the CNN model adapt to the aligned feature subspace and helps to relieve the domain distribution discrepancy. The experiments conducted on two public datasets show that adding the SA layer into CNN can improve the scene classification on target domain.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Identification of NPP transients using artificial intelligence - 335

If the accidents happen in nuclear power plants (NPPs), the NPP operators identify the transients through observing the behaviors of the major parameters. However, the integrity of the instrumentation signals is not ensured under the accident circumstances and the major parameters essential in identifying the transients can rapidly change although the instruments generate accurate signals. Thus, to successfully control the accidents by taking necessary measures relatively faster, it is very important to provide the operators with the information that can identify the transients and accidents accurately. In this study, the transients of severe accidents in NPPs are identified and classified using artificial intelligence methodologies. Several transients are identified using support vector classification (SVC) and probabilistic neural network (PNN) as artificial intelligence methodologies. The used data for the transients are the simulation data using the modular accident analysis program (MAAP) code for the optimized power reactors (OPR1000s). The time-integrated values of chosen simulated sensor signals are used as the input variables for identifying the transients. As a result of this study, the proposed models identified the transients quite precisely. Therefore, the quite accurate identification of the transients indicates the excellence of these artificial intelligence methods and they will produce useful supporting information for the operators even under extreme transient circumstances in NPPs. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2007

Solutions Network Formulation Report. Visible/Infrared Imager/Radiometer Suite and Landsat Data Continuity Mission Simulated Data Products for the Great Lakes Basin Ecological Team

The proposed solution would simulate VIIRS and LDCM sensor data for use in the USGS/USFWS GLBET DST. The VIIRS sensor possesses a spectral range that provides water-penetrating bands that could be used to assess water clarity on a regional spatial scale. The LDCM sensor possesses suitable spectral bands in a range of wavelengths that could be used to map water quality at finer spatial scales relative to VIIRS. Water quality, alongshore sediment transport and pollutant discharge tracking into the Great Lakes system are targeted as the primary products to be developed. A principal benefit of water quality monitoring via satellite imagery is its economy compared to field-data collection methods. Additionally, higher resolution satellite imagery provides a baseline dataset(s) against which later imagery can be overlaid in GIS-based DST programs. Further, information derived from higher resolution satellite imagery can be used to address public concerns and to confirm environmental compliance. The candidate solution supports the Public Health, Coastal Management, and Water Management National Applications.

Estep, Leland↗
DOE OSTI2020

A robust and multifunctional calcium coordination polymer as a selective fluorescent sensor for acetone and iron (+3) and as a tunable proton conductor

A multifunctional calcium coordination polymer (Ca-CP) formulated as [(CH 3 ) 2 NH 2 ][Ca(Me 2 tcpbH)(H 2 O)] (1) has been synthesized and characterized. Compound 1 features a robust and novel three-dimensional (3D) network with cage-like cavities. The high thermal and moisture stability of the title compound makes it a good candidate for possible environment or energy related applications. Fluorescence (FL) studies demonstrate that 1 shows emission with a maximum at 350 nm under 270 nm excitation. The title compound acts as a selective and sensitive fluorescent sensor for the detection of acetone and Fe 3+ ions at low concentrations. The FL intensity quenching percentage and the concentration ratio of Fe 3+ /Fe 2+ showed a linear relation with a Fe 3+ concentration as low as 50 μM in Fe 2+ aqueous solutions, offering an easy way to probe the extent of Fe 2+ oxidation. Moreover, due to the relatively high hydration character of Ca 2+ , the terminal water molecules and undeprotonated carboxylate groups form a strong hydrogen-bonded network within the structure, facilitating its tunable proton conduction under various humidity and temperature conditions. The proton conducting mechanism has been investigated using PXRD, IR, and EA methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

COMPASS-FME Synoptic Sites Level 2 Sensor Data v2-1

This is the version 2-1 Level 2 (L2) data release for COMPASS-FME environmental sensors located at our synoptic field sites. COMPASS-FME is studying sites in two distinct regions, the Chesapeake Bay and the Western Lake Erie Basin. We established the network at seven "synoptic" (observational) sites along the Chesapeake Bay and Lake Erie coastlines, collectively generating over three million observations per month, to track and comprehend environmental changes where land and water intersect. Additionally, the two regions provide an interesting contrast of saltwater and freshwater coasts that allow us to differentiate the impacts of inundation and coastal water chemistries in two nationally important coastal systems. Level 2 (L2) data consist of sensor observations from the COMPASS-FME synoptic sites, TEMPEST, and DELUGE. Compared to the L1 data, these are more consistent (always 15-minute timestamps for the entire year); better QA/QC’d (out of bounds, out of service, and extreme outlier values are removed); and more complete, with a gap-filled time series available alongside the main observations, and additional derived (calculated) variables. L2 data are intended to be rapidly and easily usable in analyses and simulations. However, algorithmic outlier identification always carries the risk of removing valid data, and Level 1 data may be more suitable for analyses that focus on variability or extreme events. This dataset includes: - An overall dataset README file that describes the current version, gives citation and contact information, etc. - Site- and year-specific folders, each holding variable-specific Parquet (a high performance, space efficient format; see https://parquet.apache.org) data files for each site and plot in that year. - Metadata files within each site-year folder provide full information on data units, expected ranges, contact information, detailed flood times, as well as a general description of the site. - Environmental sensor types that appear in the data files include weather (ClimaVUE50, CS, RM Young, and LI instruments in the graphs below); soil conditions (TEROS12); soil redox state (Redox); groundwater variables (AquaTROLL200 and AquaTROLL600); open water sondes (Exo); tree sap velocity (Sapflow); and system voltage and state (Datalogger). Data are reported every 15 minutes. Data files are in Apache Parquet, a high performance, space efficient format for tabular data. These files can be read using R's `arrow` package (https://arrow.apache.org/docs/r/), with similar tools available in other languages. Please see v2-1 L2 Sensor Package QStart.pdf for detailed information on data package structure, temporal coverage, and versioning.

EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC TEMPERATU↗
DOE OSTI2018

Brick : Metadata schema for portable smart building applications

Buildings account for 32% of worldwide energy usage. A new regime of exciting new “applications” that span a distributed fabric of sensors, actuators and humans has emerged to improve building energy efficiency and operations management. These applications leverage the technological advances in embedded sensing, processing, networking and methods by which they can be coupled with supervisory control and data acquisition systems deployed in modern buildings and with users on mobile wireless platforms. There are, however, several technical challenges to confront before such a vision of smart building applications and cyber-physical systems can be realized. The sensory data produced by these systems need significant curation before it can be used meaningfully. This is largely a manual, cost-prohibitive task and hence such solutions rarely experience widespread adoption due to the lack of a common descriptive schema. Recent attempts have sought to address this through data standards and metadata schemata but fall short in capturing the richness of relationships required by applications. Here, this paper describes Brick, a uniform metadata schema for representing buildings that builds upon recent advances in the area. Our schema defines a concrete ontology for sensors, subsystems and the relationships between them, which enables portable applications. We demonstrate the completeness and effectiveness of Brick by using it to represent the entire vendor-specific sensor metadata of six diverse buildings across different campuses, comprising 17,700 data points, and running eight unmodified energy efficiency applications on these buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Validation of Power Distribution Models using Load Flow Analysis in an ADMS Environment

Electric utilities are facing the need for better monitoring, analysis, and control of their distribution systems. An accurate mathematical model is a key to both the development of cutting-edge, scalable model-based algorithms and the assessment of emerging technologies such as distributed energy resources (DER) for grid planning and operation. However, the constantly evolving nature of power distribution systems poses challenges to maintaining accurate models. In this paper, we propose a novel load flow based approach to validate power distribution models. Networked equipment models described according to the Common Information Model (CIM) standard and a measurement model are used to formulate the distribution load flow problem. First, a system admittance matrix (Ybus) is derived from device-level CIM parameters. Next, the operational parameters (dynamic Ybus and nodal injections) are extracted from the measurement model using sensor configuration and equipment state. An iterative power flow method is then used to compute nodal voltages and branch flows that are compared against the measurement data to find any inconsistencies in the networked equipment model. This approach is implemented within GridAPPS-D, an open-source standards-based platform for advanced distribution management system (ADMS) application development, and demonstrated on the IEEE 13-bus, 123-bus, and 8500-node test feeders.

Common information model, model validation, power ↗
DOE OSTI2021

Novel Temperature Sensors and Wireless Telemetry for Active Condition Monitoring of Advanced Gas Turbines

The objective of the program is to develop and engine test hardware and software technologies that will enable active condition monitoring to be implemented on hot gas path turbine blades in large industrial gas turbines. The specific objectives are (1) to fabricate and install Smart Turbine Blades with thermally sprayed sensors and high temperature wireless telemetry systems in a gas turbine engine, (2) to integrate the component engine test data with remaining useful life (RUL) models and develop an approach for networking the component RUL data with Siemens' Power Diagnostics® engine monitoring system. These significant advances carried out in Phase 1 in temperature wide bandgap telemetry, along with new induced power driver and receiver geometry combined with an innovative approach to transmit digital data wirelessly will enable the opportunity to proceed with more technical innovation. The Phase 2 program focused on validation testing of sensor-wireless telemetry package in spin rig and advanced operation-based assessment (OBA) model utilizing artificial intelligence. Significant efforts were dedicated on the download of the technology onto components to be tested an actual gas turbine engine for full realization of active condition monitoring for Smart Turbine Blades.

03 NATURAL GAS↗
DOE OSTI2020

FALCON: Framework for Anomaly Detection in Industrial Control Systems

Industrial Control Systems (ICS) are used to control physical processes in critical infrastructure. These systems are used in a wide variety of operations such as water treatment, power generation and distribution, and manufacturing. While the safety and security of these systems are of serious concern, recent reports have shown an increase in targeted attacks aimed at manipulating physical processes to cause catastrophic consequences. This trend emphasizes the need for algorithms and tools that provide resilient and smart attack detection mechanisms to protect ICS. In this paper, we propose an anomaly detection framework for ICS based on a deep neural network. The proposed methodology uses dilated convolution and long short-term memory (LSTM) layers to learn temporal as well as long term dependencies within sensor and actuator data in an ICS. The sensor/actuator data are passed through a unique feature engineering pipeline where wavelet transformation is applied to the sensor signals to extract features that are fed into the model. Additionally, this paper explores four variations of supervised deep learning models, as well as an unsupervised support vector machine (SVM) model for this problem. The proposed framework is validated on Secure Water Treatment testbed results. This framework detects more attacks in a shorter period of time than previously published methods.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Relationship between microstructure evolution and properties enhancement of carbon nanotubes‐filled polybutylene terephthalate/polypropylene blends induced by thermal annealing

Abstract Thermal annealing induced microstructure evolution and properties enhancement of polybutylene terephthalate/polypropylene/carbon nanotubes (PBT/PP/CNTs) nanocomposites was methodically investigated. The electrical conductive PBT/PP/CNTs nanocomposites with a low percolation threshold were obtained by simple melt blending due to the selective location of the CNTs in PBT phase and the formation of the double percolation structure. Thermal annealing further remarkably decreased the volume resistivity of the nanocomposites, with the maximum reduction of seven orders of magnitude. Scanning electron microscope observation and rheology tests demonstrated that the relatively large CNTs agglomerates were redistributed to build more homogeneous CNTs networks after annealing. The phase coalescence during annealing promoted the formation of the more perfect co‐continuous structure. These phenomena helped to enhance the electrical conductivity of the nanocomposites. Flexural properties of the nanocomposites were also enhanced after annealing, which might be due to the more effective stress transfer between the polymer and CNTs induced by the reconstructed CNTs networks. The nanocomposites obtained in this study possess excellent electrical and mechanical properties, which can be applied to the fields of sensors, electromagnetic interference shielding, anti‐static materials, and so forth.

Shang, Mengyao↗