Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Regional-Scale 3D Ground-Motion Simulations of M w 7 Earthquakes on the Hayward Fault, Northern California Resolving Frequencies 0–10 Hz and Including Site-Response Corrections

Large earthquake ground-motion simulations in 3D Earth models provide constraints on site-specific shaking intensities but have suffered from limited frequency resolution and ignored site response in soft soils. In this work we report new regional-scale 3D simulations for moment magnitude 7.0 scenario earthquakes on the Hayward Fault, northern California with SW4. Simulations resolved significantly broader band frequencies (0–10 Hz) than previous studies and represent the highest resolution simulations for any such earthquake to date. Seismic waves were excited by a kinematic rupture following Graves and Pitarka (2016) and obeyed wave propagation in a 3D Earth model with topography from the U.S. Geological Survey (USGS) assuming a minimum shear wavespeed, VSmin, of 500 m/s. We corrected motions for linear and nonlinear site response for the shear wavespeed, VS, from the USGS 3D model, using a recently developed ground-motion model (GMM) for Fourier amplitude spectra . At soft soil locations subjected to strong shaking, the site-corrected intensities reflect the competing effects of linear amplification by low V S material, reduction of stiffness during nonlinear deformation, and damping of high frequencies. Sites with near-surface V S of 500 m/s or greater require no linear site correction but can experience amplitude reduction due to nonlinear response. Averaged over all sites, we obtained reasonable agreement with empirical ergodic median GMMs currently used for seismic hazard and design ground motions (epsilon less than 1), with marked improvement at soft sedimentary sites. At specific locations, the simulated shaking intensities show systematic differences from the GMMs that reveal path and site effects not captured in these ergodic models. Results suggest how next generation regional-scale earthquake simulations can provide higher spatial and frequency resolution while including effects of soft soils that are commonly ignored in scenario earthquake ground-motion simulations.

58 GEOSCIENCES↗
DOE OSTI2024

Sensitivity of Simulations of Double-detonation Type Ia Supernovae to Integration Methodology

Abstract We study the coupling of hydrodynamics and reactions in simulations of the double-detonation model for Type Ia supernovae. When assessing the convergence of simulations, the focus is usually on spatial resolution; however, the method of coupling the physics together as well as the tolerances used in integrating a reaction network also play an important role. In this paper, we explore how the choices made in both coupling and integrating the reaction portion of a simulation (operator/Strang splitting versus the simplified spectral deferred corrections method we introduced previously) influences the accuracy, efficiency, and nucleosynthesis of simulations of double detonations. We find no need to limit reaction rates or reduce the simulation time step to the reaction timescale. The entire simulation methodology used here is GPU-accelerated and made freely available as part of the Castro simulation code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1962

Use of Carbon Arc Lamps as Solar Simulation in Environmental Testing

This report covers work done by the authors on the solar simulator for the six-foot diameter space simulator presently in use at JPL. The space simulator was made by modifying an existent vacuum chamber and uses carbon arc lamps for solar simulation. All Ranger vehicles flown to date have been tested in this facility. The report also contains a series of appendixes covering various aspects of space-simulation design and use. Some of these appendixes contain detailed analyses of space-simulator design criteria. Others cover the techniques used in studying carbon-arc lamps and in applying them as solar simulation.

SUNFLOWER POWER SYSTEM↗
DOE OSTI2017

Hardware-in-the-Loop Simulation of a Distribution System with Air Conditioners under Model Predictive Control: Preprint

Many have proposed that responsive load provided by distributed energy resources (DERs) and demand response (DR) are an option to provide flexibility to the grid and especially to distribution feeders. However, because responsive load involves a complex interplay between tariffs and DER and DR technologies, it is challenging to test and evaluate options without negatively impacting customers. This paper describes a hardware-in-the-loop (HIL) simulation system that has been developed to reduce the cost of evaluating the impact of advanced controllers (e.g., model predictive controllers) and technologies (e.g., responsive appliances). The HIL simulation system combines large-scale software simulation with a small set of representative building equipment hardware. It is used to perform HIL simulation of a distribution feeder and the loads on it under various tariff structures. In the reported HIL simulation, loads include many simulated air conditioners and one physical air conditioner. Independent model predictive controllers manage operations of all air conditioners under a time-of-use tariff. Results from this HIL simulation and a discussion of future development work of the system are presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2017

Early implementation of digital upgrades on simulators - 347

An important aspect of successful Nuclear Power Plant (NPP) digital control system upgrade projects is to upgrade the Operator Training Simulator (OTS) or a related Engineering Simulator (ES), prior to installation of the Distributed Control System (DCS) on the plant allowing for early testing of the digital controls/HMI and for early training of the plant operators while maintaining OTS configuration management (i.e. OTS in sync with the plant's current design). Experience has shown that early implementation of digital upgrades on the OTS and/or an ES can reduce plant startup duration (related to digital systems commissioning) and ensure operators are proficient with the new digital systems to ensure safe and reliable plant operation. Including simulators in the design process offers many benefits including early identification of design deficiencies, testing deficiency fixes, developing and validating plant procedures and supporting human factors engineering, to name a few. Implementing digital upgrades on the OTS is also a regulatory requirement driven by the ANSI/ANS-3.5-2009 standard (Nuclear Power Plant Simulators for Use in Operator Training and Examination) if the new DCS affects actions to be taken by the plant operator in the main control room. This paper presents the benefits of implementing digital upgrades on the OTS and/or ES prior to plant implementation. The various simulator implementation strategies (stimulation, emulation, simulation or a hybrid solution) and selection factors are discussed. The paper also covers four (4) case studies demonstrating how digital upgrades can be implemented on simulators. The first case study covers the implementation of a Siemens offgas Programmable Logic Controller (PLC) system on the Enrico Fermi OTS (Michigan). The second case study covers the implementation of a GE main generator excitation system on the Cernavoda OTS (Romania). The third case study covers the implementation of a Siemens main feedwater control system on the Callaway OTS and ES (Missouri). The final case study covers the implementation of the non-safety related and safety related DCS on the Nuclear New Build (NNB) Hongyanhe Phase I dual-purpose OTS/ES (China). (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Portable interactive visualization of large-scale simulations in geotechnical engineering using Unity3D

Development in large-scale geotechnical engineering simulation places tremendous demand for efficient visualization of such simulation data. This study presents a lightweight software tool, i.e. Geotechnical Interactive Visualization (GIV), as a solution to this challenge, which achieves efficient interactive visualization of large-scale simulations data in geotechnical engineering. Visualization data flow and algorithms specifically optimized for common geotechnical engineering applications are implemented in GIV. GIV can visualize geotechnical structure models with time-varying attributes attached to mesh with fixed topology, and also models with time-varying mesh topologies but no attributes attached, the two most common visualization tasks in geotechnical engineering. Furthermore, challenges for large-scale simulation data visualization, including parallel simulation data redundancy, massive data size, dynamic user interaction, and portability are overcome via specifically designed algorithms for simulation data preprocessing and optimized visualization modules using the powerful 3D rendering and interactive game engine Unity3D. Comparison of GIV with several widely used visualization tools for the visualization of large-scale idealized datasets and realistic geotechnical simulations highlights the visualization efficiency, smooth interactivity, and lightweight features of GIV.

42 ENGINEERING↗
DOE OSTI2023

On the convergence of statistics in simulations of stationary incompressible turbulent flows

When reporting statistics from simulations of statistically stationary chaotic phenomenon, it is important to verify that the simulations are time-converged. This condition is connected with the statistical error or number of digits with which statistics can be reliably reported. In this work we consider numerical experiments of low Reynolds number incompressible homogeneous and isotropic turbulence as a model problem to investigate statistical convergence over finite simulation times. Specifically, we investigate the time integration requirements that allow meaningful reporting of the statistical error associated with finiteness of the temporal domain. We address two key questions: (1) How long should a simulation be performed in terms of large eddy time, and (2) How should the simulation time be divided among temporal windows over which a quantity of interest is estimated so that its statistical error could be reliably reported? We find that reliable reporting of statistical errors requires simulations on the order of 10 4 large eddy times, which is orders of magnitude longer than typically performed. Additionally, data post-processing should employ windows of at least ten times the large eddy time scale, with the most robust computation of statistical error of the mean requiring window sizes of an additional factor of ten. For practical simulations, we demonstrate that it is possible to estimate the statistical error within a factor of two under a less stringent condition in which a minimum of four windows with size at least ten large eddy times are used. In conclusion, our observations for homogeneous isotropic turbulence are also shown to hold in turbulent channel flow.

42 ENGINEERING↗
DOE OSTI2019

Closed-loop simulation with Grad-Shafranov equilibrium evolution for plasma control system development

Plasma control design increasingly depends on fast simulations able to connect to operational plasma control system (PCS) software for iterative development. GSevolve is a nonlinear free-boundary simulation that evolves the Grad-Shafranov equilibrium including current and pressure profiles, and can connect to all versions of the DIII-D PCS operational on devices around the world. Its ability to simulate the evolution of current continuously from open to closed field lines enables GSevolve to simulate full-discharge control from breakdown through plasma termination. GSevolve is compliant with the Plasma Control System Simulation Platform (PCSSP), a Matlab/Simulink®-based environment that serves as the primary framework for development of the ITER Plasma Control System (PCS). The code employs a novel response function-updating scheme to achieve fast simulations. The plasma evolves linearly until a significant shape change triggers a nonlinear update of the response while enforcing a prescribed accuracy. Old responses are recalled if the plasma changes back to an old shape. The equilibrium is a function of a state vector containing axisymmetric conductor currents and parameters related to parallel and perpendicular currents, which evolves according to an efficient state space circuit formulation. Control design and validation results are presented for simulations of DIII-D and EAST, connected to their corresponding versions of the DIII-D PCS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

3D xRAGE simulation of inertial confinement fusion implosion with imposed mode 2 laser drive asymmetry

Low-mode asymmetries represent an important obstacle to achieving high-gain inertial confinement fusion implosions. As a step in learning how to control such effects, an OMEGA experiment with imposed mode 2 laser drive asymmetries was done to study the expected signatures of this type of asymmetry [M. Gatu Johnson et al., PRE 2018]. In the present work, a 3D xRAGE simulation including the stalk mount has been brought to bear on the data from that experiment. Furthermore, comprehensive comparisons between simulated and measured observables are made. Good agreement between simulated and measured x-ray image-inferred shell trajectories, bang times and neutron emission widths are seen, showing that the hydrodynamics are well captured in the simulation. Asymmetries seen in simulated and measured time-resolved and time-integrated x-ray images and areal densities also compare well, showing impact of both stalk and mode 2. On the other hand, important differences in measured and simulated neutron emission histories, yield, and ion temperature (T ion ) asymmetries are seen, suggesting that the simulation is overestimating shock yield. Overall, the results clearly demonstrate the importance of considering all asymmetry sources when interpreting measured signatures of asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Application of Geant4 Monte Carlo simulation in dose calculations for small radiosurgical fields

The Geant4 toolkit was used to develop a Monte Carlo (MC)-based engine for accurate dose calculations in small radiation field sizes. The Geant4 toolkit (version 10.1.p02) was used to simulate 6-MV photon beam of a Varian2100C linear accelerator that is being used for stereotactic radiosurgery (SRS) treatment with small radiation fields. Geometric models of 3 in-house designed radiosurgical divergent cones, with the diameters of their projections at the isocenter being 10, 20, and 30 mm, were simulated. The accuracy of the MC simulation technique was examined by reproducing several different simulated dosimetric parameters of the primary beams with the experimental data. The dose distributions are first checked for single beams for each cone, then standard multiple field (SMF) techniques are applied. A sample set of DICOM files from computed tomography (CT) scan imaging of a patient's head was converted to the Geant4 geometry format to implement MC-based engine for a clinical test. To validate the accuracy of the MC-based calculations for SMF arrangements, the isodose lines from MC simulation in water phantom were compared with the measured isodose lines using EBT3 Gafchromic film in Solid Water phantoms. Agreements between measured and simulated depth dose values and beam profiles for SRS cones were generally within 2%/2 mm. For output factors, the largest discrepancy was observed for 10 mm SRS cone, which was 1.7%. For SMF techniques, in SRS cones, the MC simulation and EBT3 Gafchromic film dosimetry were in acceptable agreement (5%/5 mm). Excellent agreement between the results of the MC-based and measured dose values for both single and SMF techniques in SRS cones indicates the ability of the Geant4 toolkit to be applied as the platform for treatment planning of advanced radiotherapy techniques.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2019

POLARRIS: A POLArimetric Radar Retrieval and Instrument Simulator

This paper introduces a synthetic polarimetric radar simulator and retrieval package, POLArimetric Radar Retrieval and Instrument Simulator (POLARRIS), for evaluating cloud-resolving models (CRMs). POLARRIS is composed of forward (POLARRIS-f) and inverse (retrieval and diagnostic) components (iPOLARRIS) to generate not only polarimetric radar observables ($Z_h, Z_{dr}, K_{dp}, ρ_{hv})$ but also radar-consistent geophysical parameters such as hydrometeor identification, vertical velocity, and rainfall rates retrieved from CRM data. To demonstrate its application and uncertainties, POLARRIS is applied to simulations of a mesoscale convective system over the Southern Great Plains on 23 May 2011, using the Weather Research and Forecasting model with both spectral bin microphysics (SBM) and the Goddard single-moment bulk 4ICE microphysics. Statistical composites reveal a significant dependence of simulated polarimetric observables $(Z_{dr}, K_{dp})$ on the assumptions of the particle axis ratio (oblateness) and orientation angle distributions. We note the simulated polarimetric variables differ considerably between the SBM and 4ICE microphysics in part due to the differences in their ice particle size distributions as revealed by comparisons with aircraft measurements. Regardless of these uncertainties, simulated hydrometeor identification distributions overestimate graupel and hail fractions, especially from the simulation with SBM. To minimize uncertainties in forward model, the particle shape and orientation angle distributions of frozen particles should be predicted in a microphysics scheme in addition to the size distributions and particle densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Long-time simulations for fixed input states on quantum hardware

Publicly accessible quantum computers open the exciting possibility of experimental dynamical quantum simulations. While rapidly improving, current devices have short coherence times, restricting the viable circuit depth. Despite these limitations, we demonstrate long-time, high fidelity simulations on current hardware. Specifically, we simulate an XY-model spin chain on Rigetti and IBM quantum computers, maintaining a fidelity over 0.9 for 150 times longer than is possible using the iterated Trotter method. Our simulations use an algorithm we call fixed state Variational Fast Forwarding (fsVFF). Recent work has shown an approximate diagonalization of a short time evolution unitary allows a fixed-depth simulation. fsVFF substantially reduces the required resources by only diagonalizing the energy subspace spanned by the initial state, rather than over the total Hilbert space. We further demonstrate the viability of fsVFF through large numerical simulations, and provide an analysis of the noise resilience and scaling of simulation errors.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Divertor heat flux simulations in ELMy H-mode discharges of EAST

This paper presents heat flux simulations for the ELMy H-mode on the Experimental Advanced Superconducting Tokamak (EAST) using a six-field two-fluid model in BOUT++. Three EAST ELMy H-mode discharges with different plasma currents I p and geometries are studied. The trend of the scrape-off layer width $\lambda_{q}$ with I p is reproduced by the simulation. The simulated width is only half of that derived from the EAST scaling law, but agrees well with the international multi-machine scaling law. Note that there is no radio-frequency (RF) heating scheme in the simulations, and RF heating can change the boundary topology and increase the flux expansion. Anomalous electron transport is found to contribute to the divertor heat fluxes. A coherent mode is found in the edge region in simulations. The frequency and poloidal wave number $k_{\theta}$ are in the range of the edge coherent mode in EAST. The magnetic fluctuations of the mode are smaller than the electric field fluctuations. Statistical analysis of the type of turbulence shows that the turbulence transport type (blobby or turbulent) does not influence the heat flux width scaling. Here, the two-point model differs from the simulation results but the drift-based model shows good agreement with simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Performance assessment of PHITS simulations for the inverse-kinematic p( 7 Li,n) 7 Be reaction based on fast-neutron measurements with a diamond detector

The inverse-kinematics p( 7 Li,n) 7 Be reaction produces forward-focused neutron emission, offering enhanced usable flux and reduced shielding requirements. Reliable simulation of such neutron fields is essential for the development of compact accelerator-based neutron sources. In this study, a PHITS-based simulation framework for the reaction was experimentally assessed using fast-neutron measurements. Forward-directed neutrons were measured with a diamond neutron detector and quantitatively compared with simulations with newly prepared IK-Frag cross-section file based on the proton-induced reaction data in ENDF/B-VIII.1, TENDL-2023, and JENDL-4.0/HE. Measurements and simulations were performed for incident 7 Li 3+ energies ranging from 15.0 to 25.0 MeV using a 50 μm-thick polypropylene target. For all conditions, the PHITS-based simulation framework reproduced the deposited energy spectra at the correct order of magnitude. The comparison of deposited energy spectra in the diamond detector showed high correlation coefficients across all investigated energies, indicating reasonable agreement in spectral shape between simulations and measurements. This work represents an initial step toward establishing a benchmark for PHITS simulations of the inverse kinematic reaction between an incident lithium-ion and a proton target.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Covariance matrices for variance-suppressed simulations

ABSTRACT Cosmological N-body simulations provide numerical predictions of the structure of the Universe against which to compare data from ongoing and future surveys, but the growing volume of the Universe mapped by surveys requires correspondingly lower statistical uncertainties in simulations, usually achieved by increasing simulation sizes at the expense of computational power. It was recently proposed to reduce simulation variance without incurring additional computational costs by adopting fixed-amplitude initial conditions. This method has been demonstrated not to introduce bias in various statistics, including the two-point statistics of galaxy samples typically used for extracting cosmological parameters from galaxy redshift survey data, but requires us to revisit current methods for estimating covariance matrices of clustering statistics for simulations. In this work, we find that it is not trivial to construct covariance matrices analytically for fixed-amplitude simulations, but we demonstrate that ezmock (Effective Zel’dovich approximation mock catalogue), the most efficient method for constructing mock catalogues with accurate two- and three-point statistics, provides reasonable covariance matrix estimates for such simulations. We further examine how the variance suppression obtained by amplitude-fixing depends on three-point clustering, small-scale clustering, and galaxy bias, and propose intuitive explanations for the effects we observe based on the ezmock bias model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Scalable quantum simulations of scattering in scalar field theory on 120 qubits

Simulations of collisions of fundamental particles on a quantum computer are expected to have an exponential advantage over classical methods and promise to enhance searches for new physics. Furthermore, scattering in scalar field theory has been shown to be bounded-error quantum polynomial time (BQP) complete, making it a representative problem for which quantum computation is efficient. As a step toward large-scale quantum simulations of collision processes, scattering of wave packets in one-dimensional scalar field theory is simulated using 120 qubits of IBM’s Heron superconducting quantum computer ibm_fez. Variational circuits compressing vacuum preparation, wave packet initialization, and time evolution are determined using classical resources. By leveraging physical properties of states in the theory, such as symmetries and locality, the variational quantum algorithm constructs scalable circuits that can be used to simulate arbitrarily large system sizes. A new strategy is introduced to mitigate errors in quantum simulations, which enables the extraction of meaningful results from circuits with up to 4924 two-qubit gates and two-qubit gate depths of 103. The effect of interactions is clearly seen, and is found to be in agreement with classical matrix product state simulations. Finally, the developments that will be necessary to simulate high-energy inelastic collisions on a quantum computer are discussed.

quantum circuits↗
DOE OSTI2018

Internal protein motions in molecular-dynamics simulations of Bragg and diffuse X-ray scattering

Molecular-dynamics (MD) simulations of Bragg and diffuse X-ray scattering provide a means of obtaining experimentally validated models of protein conformational ensembles. This paper shows that compared with a single periodic unit-cell model, the accuracy of simulating diffuse scattering is increased when the crystal is modeled as a periodic supercell consisting of a 2 × 2 × 2 layout of eight unit cells. The MD simulations capture the general dependence of correlations on the separation of atoms. There is substantial agreement between the simulated Bragg reflections and the crystal structure; there are local deviations, however, indicating both the limitation of using a single structure to model disordered regions of the protein and local deviations of the average structure away from the crystal structure. Although it was anticipated that a simulation of longer duration might be required to achieve maximal agreement of the diffuse scattering calculation with the data using the supercell model, only a microsecond is required, the same as for the unit cell. Rigid protein motions only account for a minority fraction of the variation in atom positions from the simulation. The results indicate that protein crystal dynamics may be dominated by internal motions rather than packing interactions, and that MD simulations can be combined with Bragg and diffuse X-ray scattering to model the protein conformational ensemble.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Simulation Exploration through Immersive Parallel Planes

We present a visualization-driven simulation system that tightly couples systems dynamics simulations with an immersive virtual environment to allow analysts to rapidly develop and test hypotheses in a high-dimensional parameter space. To accomplish this, we generalize the two-dimensional parallel-coordinates statistical graphic as an immersive 'parallel-planes' visualization for multivariate time series emitted by simulations running in parallel with the visualization. In contrast to traditional parallel coordinate's mapping the multivariate dimensions onto coordinate axes represented by a series of parallel lines, we map pairs of the multivariate dimensions onto a series of parallel rectangles. As in the case of parallel coordinates, each individual observation in the dataset is mapped to a polyline whose vertices coincide with its coordinate values. Regions of the rectangles can be 'brushed' to highlight and select observations of interest: a 'slider' control allows the user to filter the observations by their time coordinate. In an immersive virtual environment, users interact with the parallel planes using a joystick that can select regions on the planes, manipulate selection, and filter time. The brushing and selection actions are used to both explore existing data as well as to launch additional simulations corresponding to the visually selected portions of the input parameter space. As soon as the new simulations complete, their resulting observations are displayed in the virtual environment. This tight feedback loop between simulation and immersive analytics accelerates users' realization of insights about the simulation and its output.

97 MATHEMATICS AND COMPUTING↗